PIN-RIVET

The contract solicitation SPE4A6-26-T-13EX pertains to the procurement of threaded pin-rivets identified by NSN 5320010592625, classified as a commercial item manufactured to the current revision of the non-government standard NAS4452 Revision 4 dated June 30, 2023, or NAS4444 Revision 6 dated February 28, 2019, with past revisions accepted if they were current at the time of manufacture. The requirement specifies delivery of 578 and 855 units respectively to two DLA distribution depots in San Diego, CA and Hill AFB, UT, with delivery required within 50 days of award and a target completion date of December 25, 2026. FOB Origin applies to both delivery points, with zero variance permitted in quantity, and both inspection and acceptance are conducted at the origin by the government. Packaging must strictly comply with MIL-STD-2073-1E, including clean/dry preservation method (Code 10), no preservation material, unit packaging in bags with intermediate containers of Type E5, and marking per MIL-STD-129 with Data Matrix and linear barcodes; item unique identification is not required under DFARS 252.211-7003(c)(1)(i). The item is designated as a critical application item, and physical marking per RQ017 applies directly to bare items. Quality conformity is governed by MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances required if MIL-STD-105/ASQ Z1.4 is used for lot sizing unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively; manufacturers must operate under an approved quality system such as SAE AS9003 or ISO 9001. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, including tailored higher-level requirements, inspection at origin, and removal of government identification from non-accepted supplies. The contractor must provide a Certificate of Quality Compliance and adhere to hazardous material labeling per 252.223-7001