This Solicitation opportunity from Department Of Defense was posted on August 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, STRAIGHT, HEADED

Closed

SPE4A5-26-T-344UFederal

Submission Closed08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

Supply of Clamp, Block (NSN: 5342016858223)

POSTED

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-00-995-1197)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26TH

Solicitation SPE4A6-26-T-26TH, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 13 units of Stud Assembly, Turnlock Fasteners (NSN 5325-00-594-6267). The requirement specifies a delivery timeframe of 5 days after receipt of order, with shipping terms set as FOB Origin via the fastest traceable means. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The contract includes stringent regulatory and technical requirements, including CMMC Level 2 certification via a C3PAO and compliance with ITAR and EAR export controls. Technical data access is restricted to approved US/Canada Joint Certification Program participants. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Additionally, the offeror must comply with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding telecommunications equipment and cybersecurity. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26RJ

Solicitation SPE4A6-26-T-26RJ, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 45 units of Fastener Snap Assemblies under NSN 5325-01-191-3418. Each assembly is a commercial item consisting of one metallic eyelet (P/N MS27980-8B), one cap snap fastener (P/N MS27980-2B), one stud snap fastener (P/N MS27980-7B), and one socket snap fastener (P/N AN227-7B). The hardware must be manufactured to the current revision of the defining military part standard, specifically referencing Technical Data Package BASIC UNK AN227 Revision 9 dated February 14, 2019. Delivery is required within 20 days after receipt of order to a consignee in Spangdahlem, Germany, with inspection and acceptance occurring at the destination. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment must be processed electronically through the Wide Area WorkFlow system. The solicitation allows for a price evaluation preference for certified HUBZone Small Business Concerns and explicitly prohibits the use of additive manufacturing for the produced items.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-26-T-695J

Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

WHEEL, SOLID, METALLIC

Solicitation # SPE7LX-26-U-9815

Solicitation SPE7LX-26-U-9815 is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 56 solid metallic wheels, identified by NSN 5340-01-063-5825. This is a Service-Disabled Veteran-Owned Small Business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars. The contract includes a guaranteed minimum quantity of 8 units and a minimum delivery order quantity of 14 units, with a delivery lead time of 210 days. Award is based on the price quoted for the estimated annual demand and may be processed via automated award. The contractor must adhere to strict technical and quality standards, including reference drawing 19207 12274455 and QAP 16236. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and special packaging instruction AK10635825. Key regulatory requirements include CMMC Level 2 certification, compliance with the Buy American Act and Berry Amendment, and the prohibition of Class I ozone-depleting chemicals. Technical data is subject to ITAR or EAR export controls. Inspection and acceptance will occur at the destination, and all invoicing must be processed through the Wide Area WorkFlow system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5309

Solicitation SPE7L5-26-T-5309 is a request for quotations issued by DLA Land and Maritime for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111. This small business set-aside under NAICS 332510 requires delivery within 105 days after receipt of order, with a need ship date of June 9, 2026, and a final required delivery date of August 14, 2026. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict quality and technical compliance, requiring manufacturers to adhere to ISO 9001:2015 standards. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the use of mercury or mercury-containing compounds in preservation and packaging per NAVSEA 5100-003D. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5310

Solicitation SPE7L5-26-T-5310 is a small business set-aside issued by DLA Land and Maritime for the procurement of 595 lock pins, identified by NSN 5315012977866. The requirement is categorized under NAICS code 332510 and specifies a delivery timeline of 41 days after order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking and labeling in accordance with MIL-STD-129. Palletization must follow RP001 DLA Packaging Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-25XV

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement specifies part numbers J-13898-2 from Lord Corporation and RH-8935 from Redhawk EMS Inc. Delivery is required by February 22, 2027, with a need ship date of January 16, 2027, shipping FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-70B4

The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days

AI Contract Overview

Solicitation SPE4A5-26-T-344U is a total small business set-aside for the procurement of 597 units of straight headed pins (NSN 5315-01-322-5539) for the Department of Defense. The contract is managed by the ASC Supplier Oper OEM Division and requires delivery to the DDSP New Cumberland Facility in Pennsylvania. The need ship date is November 30, 2026, with an original required delivery date of May 4, 2027, and a delivery window of 102 days after receipt of order. Terms are FOB Origin, with both inspection and acceptance occurring at the origin. A critical requirement for this award is the Qualified Suppliers List (QSL) program; only manufacturers or distributors listed on the QSLM/QSLD are eligible for award. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015, MIL-STD-1916 for sampling, and specific Technical Data Package (TDP) drawings. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must maintain supply chain traceability documentation per DLAD Procurement Note C03 and comply with cybersecurity requirements for safeguarding covered defense information under DFARS 252.204-7012. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

General Info

Procurement of 597 straight headed pins for QSLM/QSLD certified small business manufacturers.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

Request for Quotations SPE4A5-26-T-344U

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 11

Solicitation

Response DeadlineAug 19

Deadline has passed

Submission Closed

08/19/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Johquin Wiley

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
IS097: QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/QUALIFIED SUPPLIERS
LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT APRIL
2004) FOR FSC 5315 (QUICK RELEASE PINS ONLY).
ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR
AN AWARD PURSUANT TO THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH
EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
SPE4A5-26-T-344U
SECTION B
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY
YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO
THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL
PROGRAM, (EXCEPT IN THE CASE OF FMS
(FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION
ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO
NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/What-DLA-Offers/Consumable-Hardware/Qualified-Suppli ers-List/
-OREMAIL: AviationQSL@dla.mil
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 3 IAW BASIC DRAWING NR 78286 70209-27000 REVISION NR R DTD 09/06/2011 PART PIECE NUMBER: 70209-27000-041
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8870 REVISION NR 7 DTD 02/08/2010 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 05 DTD 07/08/1996 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8424 REVISION NR 3 DTD 03/14/1966 PART PIECE NUMBER:
TDP Rev A Gen 3
SPE4A5-26-T-344U
SECTION B
IAW REFERENCE DRAWING NR 78286 SS8435
REVISION NR 9 DTD 05/22/2012
PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8442 REVISION NR 6 DTD 02/12/2014 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8798 REVISION NR 23 DTD 06/30/2022 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8806 REVISION NR 13 DTD 06/17/2014 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 70209-27000 REVISION NR BH DTD 09/09/2022 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 5DTD 01/29/2007 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8805 REVISION NR 11 DTD 11/12/2014 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8043 REVISION NR 5 DTD 04/29/2009 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS5100 REVISION NR 39 DTD 10/27/2011 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8013 REVISION NR 09 DTD 11/21/2013 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8866 REVISION NR 10 DTD 04/14/2015 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS9208 REVISION NR 55 DTD 04/14/2015 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 70209-27000 REVISION NR AG DTD 10/14/2025 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 81996 70209-27000 REVISION NR D DTD 01/12/2024 PART PIECE NUMBER:
TDP Rev A Gen 3
SPE4A5-26-T-344U
SECTION B
IAW REFERENCE DRAWING NR 78286 SS8424
REVISION NR 3 DTD 01/09/1998
PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 5DTD 01/09/2001 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 05 DTD 08/15/2000 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8435 REVISION NR 9 DTD 12/03/1982 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SES-521025 REVISION NR 06 DTD 07/07/2006 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 05 DTD 06/06/1997 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8870 REVISION NR 7DTD 12/21/2011 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8870 REVISION NR 7DTD 12/01/2011 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 81996 70209-27000 REVISION NR R DTD 01/04/2010 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 78286 SS8423 REVISION NR 5 DTD 08/15/2000 PART PIECE NUMBER:
TDP Rev A Gen 3 IAW REFERENCE DRAWING NR 81996 70209-27000-041 REVISION NR DTD 04/27/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-344U
SECTION B
PR: 7017742711 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017742711 0001 EA 597.000
NSN/MATERIAL:5315013225539
DELIVERY (IN DAYS):0102
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/30/2026 Original Required Delivery Date:05/04/2027
SPE4A5-26-T-344U NSN/Part Number: 5315-01-322-5539 Quantity: 597 EA Purchase Request: 7017742711QTY: 597 Delivery: 102 days ADO