Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HANDLE, PUMP

Active
SPE4A7-26-T-609PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 50 pump handles identified by NSN 5342008679546 under solicitation SPE4A7-26-T-609P, with delivery required within 33 days of shipment. The order is split into three line items totaling 50 units—7 units for delivery to Tinker AFB, Oklahoma; 10 units to Hill AFB, Utah; and 33 units to Robins AFB, Georgia—each with a unit price of $1.00, resulting in a total contract value of $50.00. All items must be packaged in accordance with ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with DLA Packaging Requirements RP001, with the Unit of Issue as EA and Quantity per Unit Pack as 1. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date for all items is October 5, 2026, though each line item has a separate need ship date between May and December 2026. Packaging and shipping instructions, including freight and parcel post addresses, are specified for each location, and all requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM standards where applicable. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the primary point of contact.

General Info

Procure 50 pump handles at $1 each, deliver to three AF bases by Oct 5, 2026, per DLA packaging and labeling standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-609P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HANDLE,PUMP
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741413 0001 EA 7.000
NSN/MATERIAL:5342008679546
DELIVERY (IN DAYS):0033
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE4A7-26-T-609P
SECTION B
PR: 7017741413 PRLI: 0001 CONT’D
Need Ship Date:12/04/2026 Original Required Delivery Date:10/05/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017741413 0002 EA 10.000
NSN/MATERIAL:5342008679546
DELIVERY (IN DAYS):0033
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
SPE4A7-26-T-609P
SECTION B
PR: 7017741413 PRLI: 0002 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:05/12/2026 Original Required Delivery Date:10/05/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017741413 0003 EA 33.000
NSN/MATERIAL:5342008679546
DELIVERY (IN DAYS):0033
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE4A7-26-T-609P
SECTION B
PR: 7017741413 PRLI: 0003 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:12/07/2026 Original Required Delivery Date:10/05/2026
SPE4A7-26-T-609P NSN/Part Number: 5342-00-867-9546 Quantity: 7 EA Purchase Request: 7017741413QTY: 50 Delivery: 33 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
Hose Assembly Supply and Delivery
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

N/A
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A6-26-T-11SY
The contract is for the procurement of seven grooved couplings and clamps, identified by NSN 5342010178437, with a unit price of $7.00 per item, resulting in a total contract value of $49.00. Delivery is required within 171 days from the contract date, with shipment terms FOB origin and no variance allowed in quantity; the full order of seven units must be delivered without deviation. Inspection and acceptance both occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA’s RP001 packaging guidelines. Mercury and mercury compounds are explicitly prohibited in all preservation, packaging, and marking processes. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery deadline of July 5, 2027. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the solicitation was issued under contract number SPE4A6-26-T-11SY with a response deadline of August 12, 2026. The procurement falls under NAICS code 332994 and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
FAIRLEAD, TUBULAR
Solicitation # SPE4A7-26-T-610P
The contract pertains to the procurement of two tubular fairleads, identified by NSN 5342-01-220-7044, under solicitation number SPE4A7-26-T-610P, with a delivery requirement of 171 days after order. All supplies must comply with the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered standards referenced in the official DLA repository. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Commercial off-the-shelf items are accepted provided the agency has adequate commercial catalog data. The item is to be delivered to New Cumberland, Pennsylvania, with the Department of Defense as the procuring agency under NAICS code 332994. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and all applicable revisions to technical and quality standards are controlled by the solicitation issue date unless amended. Primary point of contact is Jamiah Sutton at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L7-26-Q-2111
The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
STOP, DRAWER
Solicitation # SPE4A7-26-T-610W
This contract is a total small business set-aside under solicitation SPE4A7-26-T-610W for the procurement of 30 units of part number 575089 identified by NSN 5342012342741, designated as a critical application item and supplied by R F PRODUCTS, INC. (CAGE 58022). The delivery is required within 171 days of award with FOB origin terms, inspection and acceptance occurring at destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, preservation method 10, and unit container D3, with all marking adhering to MIL-STD-129 and no special markings required. Palletization must also follow DLA standards, and the parcel post and freight shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware, supply, or packaging materials, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents under NAVSEA 5100-003D, which must include secondary containment and be shockproof. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The required delivery date is August 7, 2027, with a need ship date of January 31, 2027, and the solicitation closed on August 12, 2026, with Michael Johnson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
RACK, STORAGE, SMALL
Solicitation # SPE7L3-26-T-146L
The contract is for the procurement of four units of a small storage rack identified by NSN 1095-01-710-8626 and part number UWRM7U, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and container codes. Marking must adhere to MIL-STD-129 with no special markings, and palletization must follow DLA packaging requirements. The goods are to be shipped via traceable means—parcel post is prohibited—to the designated government facility at Fort Carson, Colorado. The contractor is required to retain complete supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L3-26-T-146L, issued on August 4, 2026, with a response deadline of August 17, 2026. The primary point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
LATCH, ASSEMBLY
Solicitation # SPE4A6-26-T-11SN
The contract specifies the procurement of a LATCH, ASSEMBLY with NSN 5342009614436 and part number H312-2 manufactured by HARTWELL CORPORATION, in a quantity of four units at a unit price of $4.00, for a total price of $16.00. Delivery is required FOB origin within 171 days from the contract date, with zero variance allowed in quantity, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951 and MIL-STD-129 for packaging and labeling. Sampling shall follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017 standards, and packaging must adhere to DLA Packaging Requirements for Procurement, including palletization and labeling in compliance with MIL-STD-129. Inspection and acceptance occur at the destination, and transportation details are governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 28, 2027, with a needed ship date of January 31, 2027, under solicitation SPE4A6-26-T-11SN, with primary point of contact Emma Garrett at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUN
Solicitation # SPE7L7-26-Q-2109
The contract covers the procurement of three military-grade components: a support chute for ammunition, an accelerator machine, and a belt feed slide pin, all sourced from FN HERSTAL S.A. and identified by specific NSNs and part numbers. Quantities are strictly fixed at ten and eight units respectively, with zero percent variance allowed, and delivery is mandated at the destination point under FOB destination terms, with delivery windows of 252 and 295 days after award. All items are classified as critical application items subject to stringent technical and quality standards referenced from the DLA Master List, and must comply with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA packaging requirements. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and government identification must be removed from non-accepted supplies. Each item is designated as a defense article subject to ITAR regulations, requiring exporter registration with the Directorate of Defense Trade Controls, and technical data associated with the belt feed slide pin is subject to export controls under ITAR and EAR, restricted to contractors with approved JCP certification and completed training. The accelerator machine is also subject to demilitarization requirements under Category I munitions. Packaging and shipping instructions direct delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. All documentation, including pricing, will be completed upon award, and the contract solicitation number is SPE7L7-26-Q-2109, issued by the Department of Defense with Charles Duncan as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
PLATE, FRONT
Solicitation # SPE4A6-26-T-11UY
The contract pertains to the procurement of a Front Plate identified by part number E-171-824-1R and NSN 5342-01-257-0637, with a quantity of six units to be delivered FOB origin within 171 days of contract award. The item is designated as a critical application component and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which governs all specifications unless amended by the solicitation. Sampling procedures are mandated to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise stated, and verification levels are fixed at VII, IV, and II for critical, major, and minor attributes respectively. Mercury and mercury-containing compounds are strictly prohibited in the item itself, in preservation, packaging, and marking, with narrow exceptions for functional components such as batteries or sensors approved by NAVSEA. All packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA’s packaging requirements. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS 332994, with a response deadline of August 12, 2026, and a required delivery date of February 25, 2027.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BOLT, EXPANDABLE
Solicitation # SPE4A7-26-T-610Q
The contract is for 42 expandable bolts identified by NSN 5342011839533 and part number HS5389-7-31, with a unit price of $42.00 and a total value of $1,764.00. Delivery is required within 130 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, utilizing packaging code U and no special marking. The item is classified as a critical application item and requires adherence to DLA procurement notes for supply chain traceability, component qualification via the HS5389QPL, and retention of documentation per DLA Directive C03. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Measuring and test equipment must meet RT001 standards, and the item carries no shelf life limitation. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A7-26-T-610Q, and the procurement falls under NAICS code 332994. The primary point of contact is Brandon Smith of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-610L
This contract pertains to the procurement of a grooved coupling and clamp, identified by NSN 5342011892949 and part number 7M1076-150, with a total quantity of 24 units required. The item is classified as a source-controlled critical application component and must be manufactured and tested strictly in accordance with specification SPE4A7-26-T-610L, Section B. Only vendors with direct access to the limited rights data or verifiable traceability to approved sources—such as Grimes Aerospace Company, Voss Industries, Boeing, or Eaton Aeroquip—are eligible to quote. The item requires specialized casting or forging processes, and the government may lack the necessary tooling; suppliers must submit a Casting and Forging Assistance Request if sourcing support is needed. All units must be delivered FOB origin within 171 days, with a final delivery deadline of February 9, 2027, and are subject to zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or an equivalent zero-based inspection plan, with critical attributes requiring a V7 verification level or AQL of 0.1. No shelf life applies, but documentation for source approval via a SAR package is mandatory for new suppliers. The contract references the DLA Master List of Technical and Quality Requirements, which supersedes all other standards, and all markings and labeling must conform to government specifications. The point of contact is Lexus Henry, and delivery must be directed to DLA Distribution Cherry Point in North Carolina.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
PIN, GROOVED, HEADLES
Solicitation # SPE4A6-26-T-11TB
The contract pertains to the procurement of 1,894 units of PIN, GROOVED, HEADLES, identified by NSN 5315010183841, under solicitation SPE4A6-26-T-11TB. Delivery is required within 171 days from the contract award, with a final need-by date of January 31, 2027, and an original required delivery date of March 28, 2027. The item is to be delivered FOB origin with zero tolerance for quantity variance, meaning exactly 1,894 units must be shipped. Inspection and acceptance both occur at the destination, which is the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951 unless superseded by DLA Master List requirements, and all packaging and labeling must adhere to MIL-STD-129. Unit packaging must reflect QUP 010, and palletization must follow RP001 DLA Packaging Requirements for Procurement. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The sole point of contact for inquiries is Samantha Hopkins of the ASC Commodities Division, Department of Defense, reachable via phone or email.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
This contract is for the procurement of 1,854 units of a machine thread bushing identified by NSN 5365-01-270-7546, under solicitation SPE4A7-26-T-610X, with a response deadline of August 12, 2026, and a delivery timeline of 128 days after award. The item is classified as a commercial item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item must be physically marked as specified, and any technical data associated with it is subject to export controls under ITAR or EAR, requiring prior authorization for disclosure to foreign persons or entities, including foreign nationals within the U.S. Only contractors with JCP certification, approved training completion, and DLA authorization may access this controlled technical data. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332510 and is managed by the Department of Defense through the ASC Supplier Oper AE and AF DIV, with performance expected in Texarkana, Texas, and primary point of contact being Jamiah Sutton.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
This contract pertains to the procurement of a CORE ASSY BOND, specified under part number LM-200-158 and NSN 2995015940126, with a quantity of 20 units to be delivered FOB origin within 171 days from the contract date. The delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The item is designated as a critical application item, triggering stringent compliance requirements including compliance with CMMC Level 2 Self-Assessment and strict physical identification and bare item marking protocols. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001 specifications. All samples must be inspected using zero-based sampling per MIL-STD-1916 or ASQ H1331, Table 1, with acceptance thresholds of zero non-conformances unless otherwise directed; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes default to major. Measurement and test equipment must meet RT001 standards, and documentation for source approval requests is required under RC001. Removal of government identification from rejected items is mandatory under RQ011, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers under RQ001. The contract is under solicitation SPE4A7-26-T-612N, issued by the Department of Defense, with a response deadline in August 2026 and a required delivery date of May 23, 2027. No quantity variance is permitted, and the unit of issue is each, with full compliance with DLA’s authorized unit of issue framework.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details