Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SAFETY CABLE KIT

Active
SPE4A7-26-T-614CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.

General Info

16 packaging groups of 50 safety cable kits each, each with cable and magazine preloaded with 50 AS3510-0312K ferrules, DLA-compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-614C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SAFETY CABLE KIT
SAFETY CABLE KIT
UNIT OF ISSUE CHANGED TO PG, (PG = 50EA) ON 1 APR 2022
1 PG CONTAINS 50 SEPARATE KITS. EACH KIT CONTAINS A CABLE AND A
MAGAZINE. EACH MAGAZINE WITHIN EACH KIT CONTAINS 50 PRELOADED FERRULES
I/A/W AS3510-0312K.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5342-01-625-3947 Quantity: 16 PG Purchase Request: 7017739772QTY: 16 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotes for 1,854 machine thread bushings identified by NSN 5365012707546, to be delivered to DLA Distribution Red River within 128 days of award. This procurement is conducted under solicitation SPE4A726T610X, which is exclusively available electronically via the SAM.gov platform, with no hard copies provided. Digitized drawings and military specifications may be accessed online. The solicitation is set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and only responsible sources meeting this eligibility criterion may submit responses. All quotes must be submitted electronically through the designated portal prior to the deadline of August 12, 2026. Questions concerning the solicitation should be directed to the designated point of contact via email, as specified in the official document accessible through the provided UI link or the DIBBS website using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A6-26-T-12AL
The contract specifies the procurement of five SPACER, PLATE units with NSN 5365-01-479-8435 under solicitation SPE4A6-26-T-12AL, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days from the award date, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E using packaging method 33, dry press, with no cushioning materials. Marking follows MIL-STD-129 with no special coding, and palletization adheres to DLA’s packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must comply with DLA procedural notes C19 and C20. The original required delivery date was January 17, 2027, with a needed ship date of January 31, 2027. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The unit of issue is each (EA), priced at $5.00 per unit for a total of $25.00. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. Removal of government identification from non-accepted supplies is required per RQ011, and all documentation must align with the authorized DLA purchasing and unit of issue standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-614T
The contract is for 5,265 units of a BUSHING, SLEEVE with part number 5365-01-140-4534, issued under solicitation SPE4A7-26-T-614T as a Women-Owned Small Business Set-Aside with a NAICS code of 332510. The item includes technical data subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048 and prohibiting unauthorized export or disclosure to foreign persons, regardless of location. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally authorized by DLA. The delivery deadline is 170 days after order award, with performance to occur in Texarkana, Texas. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV under point of contact Wendy Jones. Only CMMC Level 2 certified C3PAOs are eligible to perform assessments related to this requirement, and physical identification and bare item marking must comply with RQ017 standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A7-26-T-611F
The contract pertains to the procurement of 17 units of PIN, SHOULDER, HEADED with NSN 5315-01-291-7247 under solicitation SPE4A7-26-T-611F, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The delivery is required within 171 days after award, and the response deadline for submissions is August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Specific documentation and procedural obligations include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking requirements. Covered defense information may apply, and source approval documentation must be submitted as required. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Brad Ingram, reachable via email and phone provided. The NAICS code is 332510, indicating the contract falls under forging and stamping operations within the defense procurement framework.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
The contract seeks the procurement of 20 units of CORE ASSY BOND,SPEC with NSN 2995015940126, to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. Only two approved sources are listed for this item, identified by the part numbers LM-200-158 under vendors 76005 and 98897. The solicitation is issued as an RFQ through SAM. gov under number SPE4A7726T612N and is strictly electronic; no hard copies are available, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, provided they are received electronically by the deadline of August 12, 2026. The opportunity is open without set-aside restrictions, and responses must be submitted via the online portal. The contracting office is the DLA Aviation based in Richmond, Virginia, with inquiries to be directed to the designated point of contact via email. The NAICS code 336412 indicates this procurement relates to aerospace product and parts manufacturing.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-611G
The solicitation seeks procurement of 10 units of NSN 1650012936045, HEAD,HYDRAULIC MOTOR-P, with nine units to be delivered to W1A8 DLA DISTRIBUTION within 613 days after award and one unit within 240 days after award. All responsible sources are invited to submit electronic quotes by the deadline of August 12, 2026, and timely submissions will be considered. The contract is classified as a combined opportunity under NAICS code 336413, administered by the Department of Defense through DLA Aviation, with the contracting office located in Richmond, Virginia. Solicitation details can be accessed via the provided SAM.gov link, and all inquiries must be directed to the designated buyer email address listed in the solicitation document.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details