Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADLE

Active
SPE4A6-26-T-06UUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 26 straight pin headle assemblies under NSN 5315-01-494-3079, with delivery required within 170 days FOB origin, to the DLA Distribution facility in New Cumberland, Pennsylvania. All supplies must comply strictly with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking codes applied. Packaging must include preservation method 33, dry climate control, and be contained in a unit container with intermediate packaging labeled E5. Mercury and mercury compounds are prohibited in all phases of preservation, packaging, and marking, except for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents, which must include a second containment boundary where applicable. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero nonconformances allowed unless otherwise stated, and attribute classifications must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Critical application item details are linked to Bath Iron Works Corporation part number 8100-1253-0073. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for all R and I numbered specifications and mandates compliance with the revision effective on the solicitation issue date. Shipping instructions and transport guidance are governed by DLAD Proc Notes C19 and C20, with the original required delivery date set for March 18, 2027, and the needed ship date on January 10, 2027.

General Info

Procure 26 straight pin headle assemblies, DLA compliant, FOB origin, delivery by March 18, 2027, no mercury, zero defects.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06UU for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
BATH IRON WORKS CORPORATION 70876 P/N 8100-1253-0073 PC NO 49
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A6-26-T-06UU
SECTION B
PR: 7017486287 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486287 0001 EA 26.000
NSN/MATERIAL:5315014943079
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:03/18/2027
SPE4A6-26-T-06UU
SECTION B
PR: 7017486287 PRLI: 0001 CONT’D
SPE4A6-26-T-06UU NSN/Part Number: 5315-01-494-3079 Quantity: 26 EA Purchase Request: 7017486287QTY: 26 Delivery: 170 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
Manufacture of Aircraft Cargo Tie-Down AssembliesThe contract calls for the full production of cargo tie-down assemblies identified by NSN 1670-01-599-2776, encompassing all stages from fabrication and assembly to rigorous testing and certification in compliance with military standards. This effort is critical to ensuring the safety and operational readiness of aircraft cargo systems, requiring precise adherence to technical specifications and quality controls defined by defense requirements. The work must be executed to meet the stringent durability, load capacity, and reliability benchmarks established for military aviation applications. Issued as a subcontract under NAICS code 332510, the opportunity is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by August 17, 2026. Performance will be executed in accordance with defense logistics protocols, though specific location details are not provided. The contract vehicle is accessible via the DIBBS platform, and all qualified subcontractors must ensure complete compliance with federal acquisition regulations and military certification procedures to be eligible for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 1 hour

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, AIRCRAFTThis contract pertains to the procurement of a Tie Down, Cargo, Aircraft, identified by NSN 1670-01-599-2776, with a single unit requirement and a firm fixed price structure. The item is designated as a Critical Safety Item by both the Navy and Air Force, requiring strict adherence to safety and quality standards, including mandatory inspection and verification by qualified personnel through QPL procedures as defined in MIL-DTL-25959J Revision 1, with no authorization for Alternative Repair Procedures. All components must comply with stringent quality benchmarks including SAE AS9100, and the item must be manufactured without intentional addition of mercury except in specified exceptions such as functional batteries or instruments, with additional containment requirements for portable devices. The supplier must ensure supply chain traceability in accordance with DLA Directive Procurement Note C03 and maintain documentation for audit purposes. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on every unit pack. Sampling for inspection must conform to MIL-STD-1916 or a comparable zero-defect plan, with verification levels assigned to critical, major, and minor attributes. The delivery timeline is set for 522 days after contract award, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination with specific palletization and packaging standards outlined in DLA packaging directives. Manufacturing may involve casting or forging operations where the government does not hold the necessary tooling; suppliers are advised to submit a Casting and Forging Assistance Request if required. Any waiver or deviation from contractual requirements must be formally submitted to the DSC Contracting Officer for approval. The item is also subject to the DLA Master List of Technical and Quality Requirements, with specific references to RQ009 for origin inspection, RQ016 for qualified product lists, RQ018 for traceability retention, RT001 for calibrated test equipment, and RQ039 for higher-level quality compliance. All documentation must align with the contract’s referenced specifications, including QAP-13873 and SD-6, and the unit of issue must correspond to the approved DoD ANSI X12 standard. Failure to meet any of these requirements, particularly those tied to safety and traceability, will result in rejection of the supply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 1 hour

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
PAD, CUSHIONINGThe item is a PAD, CUSHIONING with NSN 5340-01-494-3787, ordered in a quantity of one unit under purchase request 7017459044, with a delivery requirement of five days ADO. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with active US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to receive or handle such information. The solicitation was posted on July 15, 2026, with a response deadline of July 27, 2026, under contract number SPE7M0-26-T-009U, classified under NAICS code 332510, and issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Performance is required at Pearl Harbor, Hawaii, 96860-5033, with Grace Beck as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RING, EXTERNALLY THRThis contract specifies the procurement of a RING, EXTERNALLY THR with NSN 5365-00-138-5386 and part number 091-69219, manufactured by MOOG MILITARY AIRCRAFT LLC, for a quantity of nine units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Packaging Requirements (RP001) taking precedence, including palletization standards. Item Unique Identification is not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are deemed major. The item is classified as a critical application item. Delivery is FOB origin, with inspection and acceptance occurring at destination, and full compliance with the DLA packaging and labeling standards required. The required delivery date is 170 days after contract award, with an original required delivery date of May 29, 2027, and a need ship date of January 10, 2027. The quantity variance is strictly zero percent, meaning exact delivery of nine units is mandatory. The delivery address is the DLA Distribution San Joaquin receiving warehouse in Tracy, California. All documentation, including source approval requests, must meet the specified standards, and all government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract is bound by the DLA Master List and applicable military standards, with transportation logistics governed by DLAD proc notes C19 and C20. The solicitation was issued on July 15, 2026, with responses due by July 23, 2026, under NAICS code 332510, managed by the Department of Defense Aviation Supply Chain.
AVIATION SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Clamp, Loop (NSN 5340012055808, P/N 9S8068)The contract entails the procurement and delivery of two units of a specific clamp and loop component identified by NSN 5340012055808 and part number 9S8068, with delivery required to Atlanta, GA no later than July 22, 2026. Each item must be shipped with full traceability to ensure accountability and compliance, and acceptance is contingent upon successful verification at the destination. The contract falls under the subcontract category with a NAICS code of 332510, indicating it relates to forging and stamping operations. The Defense Logistics Agency, operating under the Department of Defense, is the contracting organization, though no specific office address or point of contact is provided. The solicitation does not include a solicitation number or type of set aside, and the place of performance is not explicitly defined beyond the delivery city. The contract remains active until fulfillment, with all shipping and acceptance procedures governed by standard DLA protocols.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

N/A
View Details