Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADLE

Active
SPE4A7-26-Q-0841Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 10 straight headless pins with NSN 5315-01-449-3092 under solicitation SPE4A7-26-Q-0841, with a delivery deadline 188 days after award. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign national employees and overseas subsidiaries, and DFARS 252.225-7048 governs its handling. Access to the technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Additional requirements include CMMC Level 2 self-assessment or third-party certification, adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and compliance with covered defense information protocols. The solicitation was posted July 16, 2026, with responses due by July 20, 2026, and the primary point of contact is Brad Ingram of the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV.

General Info

Procure 10 headless pins NSN 5315-01-449-3092, deliver in 188 days, comply with ITAR, CMMC Level 2, DLA standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

339993 - Fastener, Button, Needle, and Pin ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-Q-0841 for Pin, Straight, Headless

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brad Ingram
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLESS RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-449-3092 Quantity: 10 EA Purchase Request: 7016384402QTY: 10 Delivery: 188 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339993
New
DIBBS
PIN, TAPERED, THREADEDThis contract specifies the procurement of 41 units of a tapered threaded pin designated by NSN 5315-00-265-9892 and part number AN386-3-16A, manufactured in compliance with Technical Data Package Revision B General 3 against the non-government standard NASM386 Revision 1 dated November 30, 2012, and referenced drawing 13873 EI-002659892 Revision D dated June 9, 2026. The item is classified as a critical application item with stringent quality and cybersecurity requirements, including compliance with Cybersecurity Maturity Model Certification Level 2 via self-assessment and adherence to the DLA Master List of Technical and Quality Requirements identified by R or I numbers. Inspection and acceptance occur at origin under MIL-STD-1916 or ASQ H1331 sampling, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Manufacturing may require casting or forging, and sourcing support must be requested through designated DLA channels if tooling or materials are not available. The contract is firm fixed price with no tolerance for quantity variance, requiring delivery within 260 days after order date. Packaging must conform to MIL-STD-2073-1E with specified preservation methods and materials, and marking must follow MIL-STD-129 with no special markings applied. Palletization must meet DLA Packaging Requirements, and all shipments are to be delivered to DLA Distribution Warner Robins in Georgia. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The item is needed by October 29, 2027, with the government retaining responsibility for inspection and acceptance prior to payment. The contract, issued under solicitation SPE4A7-26-Q-0845, enforces full compliance with all referenced quality, cybersecurity, and logistical standards without allowance for deviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 339993
New
DIBBS
Non-Pneumatic Tourniquet SupplyThe contract involves the supply and delivery of non-pneumatic tourniquets equipped with a 1.5-inch nylon strap and a quick-connect buckle, designed for reliable, field-ready use in medical emergencies. Each unit must be labeled in accordance with MIL-STD-129 standards and packaged to comply with ASTM D3951 specifications to ensure durability, traceability, and readiness for military logistics. The tourniquets are intended for use by defense medical personnel and must meet stringent performance and durability requirements for deployment in austere environments. The solicitation is classified as a subcontract under NAICS code 339993, indicating specialized medical device manufacturing, and is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance of the contract is required at the designated location in Niantic, Connecticut, with a ZIP code of 06357-2512. The opportunity was posted on July 16, 2026, and responses must be submitted by July 22, 2026, providing vendors a narrow window to prepare and submit proposals.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 339993
New
DIBBS
FASTENER TAPE, HOOKThe contract pertains to the procurement of 1,210 units of FASTENER TAPE, HOOK, identified by NSN 8315015635893 and part number 311336C91L, sourced from CAGE code 338X5 under solicitation SPE1C1-26-T-1536. The contract is a total small business set-aside under NAICS code 339993, with delivery required at the Travis Association for the Blind in Austin, Texas, FOB destination, within 106 days after order placement. The original delivery date is October 15, 2025, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including clean/dry preservation, unit packaging in a box with an intermediate fiberboard container and no cushioning or preservation materials. Marking must conform to MIL-STD-129 with no special marking required, and palletization must adhere to DLA’s RP001 requirements. The contract mandates electronic invoicing via Wide Area WorkFlow and requires strict compliance with hazardous material labeling under OSHA’s Hazard Communication Standard and DFARS 252.223-7001, including pre-award submission of Safety Data Sheets. Cybersecurity and supply chain integrity are enforced through clauses requiring compliance with NIST SP 800-171 and prohibitions on restricted telecommunications equipment. All offerors must affirm their small business status and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. The solicitation is electronically submitted via DIBBS by July 27, 2026, with payment and administrative details to be finalized post-award.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 339993
New
DIBBS
BALL LOCK PIN, AIRCRThe contract solicits a commercial off-the-shelf ball lock pin, part number CL-8-BLPL-3.00-C, sourced from Carr Lane Manufacturing Company, under NSN 1680-01-562-2693, with a firm fixed price structure and zero variance in quantity. The delivery is set for 77 days after order direction, with FOB destination terms, meaning title and risk transfer upon arrival at the specified delivery point. The item is subject to stringent packaging and labeling requirements, primarily governed by MIL-STD-129 for shipping marks and barcoding, and ASTM D3951 for packaging standards, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements supersede these. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement, and all packaging must be properly marked and documented in accordance with government standards. The contract is structured as a Simplified Indefinite-Delivery Contract with a five-year base period and no options, with a maximum estimated value of $349,999.99 and a guaranteed minimum annual order of 30 units. All orders are subject to Defense Priorities and Allocations System (DPAS) rating, requiring the contractor to prioritize this contract over non-defense work. The solicitation is a total small business set-aside under NAICS code 339993, requiring offerors to self-certify as small businesses and maintain current representations in the System for Award Management. Key clauses include mandatory post-award small business re-representation, affirmative action and equal opportunity requirements, prohibitions on trafficking in persons and use of covered telecommunications equipment, and strict supply chain security rules under the Federal Acquisition Supply Chain Security Act. Contractors must comply with hazardous material labeling and Safety Data Sheet submission requirements under DFARS, and submit all invoices electronically via Wide Area WorkFlow. Inspection and acceptance occur at destination, with the government retaining rights to verify compliance through product verification testing and documentation review. The contract also includes provisions for termination for convenience and default, along with whistleblower protections and requirements to report executive compensation and subcontract awards. Offerors must submit bids electronically through DIBBS, adhering to electronic data interchange protocols, and are bound by representations regarding entity identification, CAGE codes, and compliance with all applicable federal regulations, including prohibitions on contracts with entities requiring internal confidentiality agreements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339993
New
DIBBS
PIN, SHOULDER, HEADLESS
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
Federal
83--FASTENER TAPE,HOOK
DLA Troop Support

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 339993
New
SLED
Closed IV Catheter Systems SupplyThe contract calls for the supply of closed IV catheter systems featuring dual ports and 24G x 0.75 inch yellow-coded catheters specifically engineered to minimize contamination risks during vascular access procedures. These systems are designed with integrated safety features to maintain sterility and reduce the potential for healthcare-associated infections, making them suitable for clinical environments requiring high standards of infection control. The requirements emphasize technical specifications aligned with established medical device standards to ensure compatibility, reliability, and performance under routine clinical use. Bidding is conducted under a subcontract classification with a NAICS code of 339993, indicating the focus on other miscellaneous medical and surgical equipment manufacturing. The posting date is July 15, 2026, with responses due by July 30, 2026, at 4:30 PM. The procuring entity is the Health and Human Services Commission in Texas, and performance is expected within the state. All submissions must be made through the designated procurement portal at the provided URL, and while no set-aside provisions are specified, interested vendors should ensure compliance with all technical, regulatory, and delivery criteria outlined in the solicitation.
Health and Human Services Commission

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 339993
New
SLED
IV Catheter and Line Securement Devices SupplyThe contract is for the supply of IV stabilization and catheter securement devices, specifically including the StatLock Universal Plus for medium-sized lines ranging from 10 to 12FR, intended to ensure secure and reliable placement of intravenous catheters in clinical settings. The award is structured as a subcontract under the Health and Human Services Commission in Texas, with a solicitation posted on July 15, 2026, and a firm response deadline of July 30, 2026. The NAICS code 339993 indicates the procurement is for other medical appliances and supplies, reflecting the focus on specialized medical devices rather than general equipment. The place of performance and specific office address details are not provided, but the procurement is managed through the Texas SmartBuy portal, signaling a state-level procurement process aimed at streamlining vendor access and ensuring compliance with Texas healthcare supply standards. Vendors must be prepared to meet technical specifications for device compatibility, durability, and regulatory compliance for use in acute and long-term care environments.
Health and Human Services Commission

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 339993
New
SLED
Enteral Feeding Supplies SupplyThe contract titled Enteral Feeding Supplies Supply is issued by the Texas Health and Human Services Commission for the procurement of gastrostomy feeding tubes equipped with Y-ports and ENFit connectors, constructed from silicone tubing and free of DEHP, to support long-term nutritional needs of patients. These supplies are critical for safe, reliable, and compliant enteral feeding practices, ensuring compatibility with modern clinical standards and reducing risks associated with hazardous materials. The contract is structured as a subcontract under NAICS code 339993, indicating it pertains to other medical equipment and supplies manufacturing. Bids must be submitted by July 30, 2026, at 4:30 PM Central Time, following a solicitation posted on July 15, 2026. The performance location and specific delivery addresses are not detailed, but the supply is intended to serve state-funded healthcare systems in Texas. All products must meet stringent material and design specifications to ensure patient safety and regulatory compliance. Interested vendors can access the full solicitation and submission portal through the provided TX SmartBuy link, and participation is open to qualified suppliers capable of meeting volume, quality, and delivery requirements for ongoing patient care needs.
Health and Human Services Commission

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 339993
New
DIBBS
Anesthesia Harness Supply and DeliveryThe contract outlines the manufacture and supply of 10,000 anesthesia head harnesses identified by NSN 6515015296585, with all units required to be packaged in full compliance with applicable military and logistical standards. Delivery of the complete order must be finalized no later than July 17, 2026, ensuring timely availability for medical operations. The procurement is classified as a subcontract under NAICS code 339993, indicating it falls under miscellaneous manufacturing, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. Performance is designated to occur at a military postal address in FPO with ZIP code 96672-4090, reflecting international or military logistics requirements. The solicitation was posted on July 15, 2026, with responses due by July 21, 2026, allowing vendors a six-day window to submit proposals under the DLA DIBBS system.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 339993
New
DIBBS
PIN, STRAIGHT, THREADEDThe Defense Logistics Agency is soliciting quotes for 2,627 straight threaded pins with NSN 5315-01-151-0703 under a Total Small Business Set-Aside contract, with solicitation number SPE4A6-26-R-XB45 and a response deadline of July 27, 2026. This is a bilateral simplified indefinite-delivery contract based on firm fixed pricing, with an estimated annual demand of 2,627 units and a guaranteed minimum order of 2,000 units per base year; the unit price must be held for at least one year and may remain fixed through the full four-year contract period. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, superseding ASTM D3951 and other general standards, and include specific mandates such as inspection and acceptance at origin, compliance with ISO 9001:2015 or equivalent, and zero-defect acceptance criteria under MIL-STD-1916 or comparable zero-based sampling plans. Packaging and marking must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and traceability governed by the Vendor Shipment Module and strict retention of supply chain documentation. The item is subject to export control under ITAR or EAR, requiring contractor certification through the US/Canada Joint Certification Program, completion of export-controlled data training, and prior DLA approval before accessing technical data. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and covered defense information protocols apply under DFARS 252.225-7048. All contractors must be registered in SAM with current and accurate socioeconomic representations, and must certify themselves as small businesses under NAICS 339993 to qualify. Delivery is due 190 days after contract award, FOB destination, with performance subject to DPAS priority ratings and compliance with hazardous materials labeling under DFARS 252.223-7001. Electronic invoicing through WAWF is mandatory, and payment submission methods vary by contract type, with no provision for fast pay unless FAR 52.213-1 is incorporated. Evaluation is based on best value, with price, past performance (heavily weighted via PPIRS-SR and historical quality/delivery compliance), and delivery performance assessed comparatively, though
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 339993
New
DIBBS
PIN, GROUND SAFETY, SPECThe contract requires the supply of 13 units of PIN, GROUND SAFETY, SPECIAL, identified by NSN 1730-99-127-3706, under solicitation SPE8EF-26-Q-0118, with a firm fixed price and zero tolerance for quantity variance. Delivery is mandated within 90 days after award, with both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all applicable requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow DLA’s RP001 Packaging Requirements for Procurement, and the unit of issue and quantity per unit pack must match the contract specifications. The item must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20. The government’s purchase request number is 7017423030, with a required ship date of February 18, 2027. Covered Defense Information may apply, and references to the DLA Master List of Technical and Quality Requirements must be consulted using the revision in effect on the solicitation issuance or award date depending on acquisition type. The point of contact for inquiries is Russell Keiser, with contact information provided.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details