Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Piping & Expansion Joint Supply

Active

International

Response Deadline11/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of industrial piping and flexible expansion joints specifically designed for high-pressure marine environments to support Department of National Defence Victoria-Class submarine projects. The supplier is responsible for providing new piping components, including those from manufacturers such as Oldham Seals Limited, ensuring all materials strictly conform to the most current applicable drawings and part numbers. The contract is managed under NAICS code 336612 for the Government of Canada, with performance locations situated in British Columbia and Nova Scotia. Deliveries of the required components are to be made on an FCA basis. Interested parties must adhere to the response deadline of November 20, 2026.

General Info

Supply high-pressure marine piping for Victoria-Class submarines by November 20, 2026.

Agency

Government of Canada → Department of National Defence

NAICS

336612 - Boat Building

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8482-241482/A.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Multiple Victoria-Class Spares: Packing Retainer, Gaskets, Packing Assembly, Valves, Starter, Motor; Interval Timer, Expansion Joint, Pipe, O-Ring

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies industrial piping and flexible expansion joints for prime contractors on Department of National Defence (DND) Victoria-Class submarine projects. Provisions pipes and pipe expansion joints designed for high-pressure or marine environments, including components from manufacturers like Oldham Seals Limited. Must conform to the latest issue of applicable drawings and part numbers. Delivers new piping components FCA.

Similar Contracts

Same NAICS industry code

VDOT Approved Aggregate Supplier & HaulerThis subcontract opportunity is for a qualified supplier and hauler to provide various types of VDOT-approved aggregate for prime contractors operating within the Petersburg Residency of the Virginia Department of Transportation's Richmond District. The selected vendor will be responsible for the procurement, transportation, and delivery of materials F.O.B. destination to six Area Headquarters, including Jennings Ordinary, where they must off-load the aggregate into neat stockpiles. To be eligible, contractors must hold VDOT Approved List #5 certification and ensure all materials and processes comply with Section 109 of the 2020 Road and Bridge Specifications. Interested parties must submit their responses by November 5, 2026, to support infrastructure projects managed by the Virginia Department of Transportation.

Virginia Department of Transportation

POSTED

about 23 hours ago

DEADLINE

Marine Steel Fabrication & Structural RepairThis small business set-aside subcontract, managed by the Department of Homeland Security for the CG-SEA-C21 agency, involves marine steel fabrication and structural repair for USCG vessel projects in Jacksonville. The scope of work focuses on the removal and renewal of damaged hull and structural steel plating, specifically utilizing plates weighing 10.2 lbs, 12.75 lbs, and 15.3 lbs. Additionally, the contractor is responsible for repairing bulwarks and pusher knees, ensuring all welding and brazing activities comply with SFLC Std Spec 0740. To ensure quality and safety, all personnel performing welding must be certified according to SFLC Std Spec 0740 and NAVSEA TP 1688 standards. The final deliverable consists of fully installed and welded steel plating. Interested parties must submit their responses by November 9, 2026, under NAICS code 336612.

POSTED

DEADLINE

BOAT TRAILERS FOR FWS REFUGES LAW ENFORCEMENT.

Solicitation # 140FF027Q0016

Solicitation 140FF027Q0016 is a fixed-price request for the procurement of three new, unused, current production heavy-duty boat trailers for the Department of the Interior's FWS Refuges Law Enforcement. The trailers, which can be Amera Trail or an equivalent, are specifically configured for Yellowfin 24 Bay vessels and will be used for manatee zone enforcement in Florida. Technical specifications require an aluminum corrosion-resistant frame with stainless steel hardware, a 6,800 lb GVWR, tandem axles with 3,500 lb capacity each, electric over hydraulic brakes, and LED lighting. The contract is a total small business set-aside under NAICS code 336612. To be eligible for award, sellers must be manufacturers or federally authorized distributors capable of delivering the entire order within 90 days of the award date. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and other factors. All quotes must be submitted as a single consolidated PDF not exceeding 15 pages, with the total price including all shipping and handling costs. Payment will be processed electronically via the U.S. Department of the Treasury's Invoice Processing Platform. Final acceptance will occur upon delivery at the designated agency location following a successful inspection to verify that all federal, state, and manufacturer safety standards have been met.

Fws Contracting Activity

POSTED

DEADLINE

Public Safety and Emergency Services - Request for Quotes - PSD FWES River Jet Boat

Solicitation # AB-2026-06971

Public Safety and Emergency Services, specifically the Fish and Wildlife Enforcement Services, is seeking quotes for the procurement of one river jet boat. This solicitation, identified by number AB-2026-06971, is intended for performance within the province of Alberta. The request for quotes was posted on October 19, 2026, and requires a response by the deadline of October 29, 2026. Interested parties should direct inquiries to the primary procurement officer, Stephen Katabula, via the provided agency email address.

Public Safety and Emergency Services

POSTED

DEADLINE

Supply of Marine Navigational Lights (NSN 6220-00-050-6743)This subcontract opportunity is for the supply of specialized marine navigational lights, specifically NSN 6220-00-050-6743, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, through the DLA Weapons Support ASC Commodities Division, requires that all lights be manufactured or procured in strict accordance with TDP Rev A Gen 1 and reference specification MIL-DTL-24560A SUP 1, Revision A. Delivery terms are established as F.O.B. Origin. Eligible bidders must hold a valid CAGE code and maintain ISO 9001:2015 certification. This procurement is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336612. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL FLOOR SECTION, WA

Solicitation # SPE7M4-27-T-0601

Solicitation SPE7M4-27-T-0601 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 27 units of watercraft panel floor sections, identified by NSN 2040016575748 and part number 1630018. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a delivery timeline of 403 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and environmental standards, including the prohibition of intentionally added mercury and Class I ozone-depleting substances. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Quotes must be submitted via the DLA Internet Bid Board System by December 31, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

LASHING GEAR, DECK

Solicitation # SPE7M4-26-T-453Q

Solicitation SPE7M4-26-T-453Q is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 90 units of Deck Lashing Gear (NSN 2020-00-789-1065). This is designated as a critical application item that must be manufactured via a forging process in accordance with Technical Data Package Rev A Gen 1 and basic drawing 53711 1313817 Revision C. The required delivery date is December 1, 2027, with shipment to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to environmental and safety standards, specifically prohibiting the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129, with a general requirement to avoid plastics for wrapping and cushioning. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with DFARS 252.204-7012 for cybersecurity. The solicitation is open to full and open competition, with a price evaluation preference available for certified HUBZone small business concerns.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Shafting and Rudder MaintenanceThis subcontract for Shafting and Rudder Maintenance involves providing specialized inspection and repacking services for rudder and propeller shafts on behalf of prime contractors for the Massachusetts Maritime Academy. The scope of work includes repacking rudder shafts using 3/4-inch Chesterton packing, replacing the starboard side shaft seal with a Duramax DXU4000A, and conducting thorough inspections of the cutlass bearings. The contractor is required to deliver the repacked shafts, the newly installed seal, and a detailed written condition report. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must note that the response deadline for this opportunity is November 3, 2026. The contract falls under NAICS code 336612 and is managed through the Massachusetts Maritime Academy.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Cathodic Protection (Zinc Anodes)This subcontract for the Massachusetts Maritime Academy involves the supply and installation of a cathodic protection system to prevent hull corrosion. The scope of work requires the removal and replacement of up to 34 bolt-on zinc anodes measuring 1-1/4 by 6 by 12 inches, as well as one half-zinc located at the sea chest. The project will be performed at Academy Drive in Buzzards Bay, Massachusetts. Interested parties must submit their responses by November 3, 2026, in accordance with the solicitation posted on October 19, 2026.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Shipyard Haul-out and Docking ServicesThe Shipyard Haul-out and Docking Services subcontract involves the physical haul-out, blocking, shoring, and relaunching of the TV Ranger for prime contractors supporting Massachusetts Maritime Academy projects. The selected provider must utilize a dry dock or marine hoist facility capable of safely positioning the vessel for necessary repairs and ensuring its secure return to the water. Performance of these services will take place at Academy Drive in Buzzards Bay, Massachusetts. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. This opportunity falls under NAICS code 336612.

MMA01 - Massachusetts Maritime Academy

POSTED

DEADLINE

Navy Shipboard Rack Curtain ManufacturingThis subcontract, managed by DLA Maritime - Portsmouth for the Department of Defense, requires the manufacture and supply of 338 black single-panel rack curtains, identified as Product Number RC-SPECIAL 1. These curtains are intended for prime contractors working on US Navy shipboard projects and must be fabricated from darkening double-layer Nomex material. Specific design requirements include the exclusion of sliders at the top and the inclusion of inside bottom pockets for any units with a height of 18 inches or greater. To ensure operational safety and quality, all deliverables must be Navy shipboard approved and strictly comply with MIL-C-24500 and MIL-STD-1623 standards. This opportunity is designated as a Total Small Business Set Aside under NAICS code 336612, with the place of performance located in Kittery, Maine.

DLA Maritime - Portsmouth

POSTED

DEADLINE

Commercial Shipyard Welding and Fabrication ServicesThe Commercial Shipyard Welding and Fabrication Services subcontract involves providing high-specification welding, brazing, and fabrication for prime contractors supporting NAVSUP FLCY shipboard projects in Yokosuka. The scope of work includes the fabrication and inspection of pressure vessels, fillet welds, and brazed piping systems, utilizing high-heat input procedures and Post Weld Heat Treatment. All deliverables must adhere to strict industry standards, including AWS, ABS Steel Vessel Rules, and ASME BPVC Section IX. The selected provider is responsible for delivering certified welded assemblies along with comprehensive inspection reports to the Department of Defense.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Round-Trip Heavy Equipment HaulingThis subcontract involves the round-trip transportation of two wheeled loaders for prime contractors working on Department of National Defence projects at CFB Valcartier in Quebec. The service provider is responsible for the delivery of the equipment by November 16, 2026, and its subsequent recovery by March 30, 2027, operating on a Delivery Duty Paid basis. To ensure safe transport, the contractor must utilize heavy-duty low-boy trailers or specialized equipment haulers. Mandatory requirements include valid commercial trucking licenses and comprehensive insurance coverage specifically for oversized loads. This project falls under NAICS code 484220 and is managed through the Government of Canada.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

24/7 Maintenance for Wheeled LoadersThis subcontract involves providing routine and corrective maintenance for leased wheeled loaders at CFB Valcartier in Québec to support Department of National Defence projects. The selected provider is responsible for supplying all necessary labor, materials, and tools to ensure equipment remains operational throughout the rental period, with a specific focus on minimizing downtime during critical snow removal operations. To maintain high operational standards, the contractor must utilize qualified technicians and manufacturer-specific diagnostic equipment. The service requirement mandates 24/7 availability to ensure continuous equipment readiness. This opportunity is categorized under NAICS code 811192 and is associated with the Government of Canada.

POSTED

DEADLINE

Rental of Winter-Configured Wheeled LoadersThis subcontract involves the rental of two winter-configured wheeled loaders to support prime contractors on Department of National Defence projects located at CFB Valcartier in Quebec. The equipment must be delivered DDP to the site and meet strict age and usage requirements, specifically being less than five years old or having fewer than 10,000 operating hours. To ensure operational efficiency in winter conditions, the loaders must be equipped with reversible snowplows, winter fender extensions, LED lighting, and ride control. Additional safety and comfort specifications include suspension seats, automatic greasing systems, reverse alarms, and rear-view cameras.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Supply of Breathing Supply Distribution Units (BSDU)This subcontract involves the procurement of 60 Breathing Supply Distribution Units (BSDU), specifically part number UDAR-3V-001 (NCAGE L10Q5) or approved equivalents, to support prime contractors on Department of National Defence projects. The selected provider is responsible for the delivery of 60 certified units, ensuring all items are packaged according to Canadian Forces Specification D-LM-O08-036/SF-O00 and shipped DDP to CAAWC Trenton. To ensure quality and compliance, each unit must be accompanied by a TCCA Form One, FAA Form 8130-3, EASA Form One, or an OEM Certificate of Conformance. This opportunity is managed under NAICS code 423840 for the Government of Canada, with a response deadline set for November 4, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Electrical Components & Control SupplyThis subcontract involves the supply of critical electrical components, including motors, electrical starters, and timing devices, for prime contractors working on the Department of National Defence Victoria-Class submarine projects. All provided hardware must be fully compatible with submarine electrical architectures and strictly adhere to the most current applicable drawings and part numbers. The agreement specifies that new electrical components are to be delivered under FCA terms. Performance of the contract will take place in British Columbia and Nova Scotia, with a response deadline set for November 20, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

in about 1 month

Sealing & Gasket Components SupplyThis subcontract involves the supply of high-specification sealing and gasket components for prime contractors working on the Department of National Defence Victoria-Class submarine projects. The scope of work includes the provision of O-rings, gaskets, packing retainers, and packing assemblies manufactured from materials such as rubber, cork, asbestos, or leather. All deliverables must be packaged individually in strict accordance with Canadian Forces Packaging Specification D-LM-008-026/SF-001. The contract is managed by the Government of Canada and will be performed in British Columbia and Nova Scotia. Interested parties should note the response deadline of November 20, 2026. The project falls under NAICS code 326199, focusing on the delivery of new, specialized sealing components to meet rigorous military standards.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

in about 1 month

Fluid Control & Valve Components SupplyThis subcontract involves the supply of specialized fluid control and valve components for prime contractors working on the Department of National Defence Victoria-Class submarine projects. The scope of work includes providing fluid pressure regulating valves, angle valves, stop valve cartridges, and comprehensive valve parts kits. All deliverables must strictly adhere to the latest applicable drawings, specifications, and specific GSIN, NSN, and part numbers. The contract requires the delivery of new valve assemblies and repair kits under FCA terms. Performance of the contract will take place in British Columbia and Nova Scotia. This procurement is categorized under NAICS code 332911 and is managed through the Government of Canada.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

Defense-Standard Packaging and Delivery ServicesThis subcontract for Defense-Standard Packaging and Delivery Services involves providing specialized preservation, packaging, and marking of naval components for prime contractors working on Department of National Defence projects. The service provider must ensure all items are packaged according to D-LM-008-001/SF-001, MIL-STD-2073, MIL-STD-129, and NATO standards, utilizing military bar-coding and environmentally preferable materials. Final marked assemblies are to be delivered to CFB Halifax and CFB Esquimalt. To be eligible for this contract, the provider must maintain registration with the Controlled Goods Program. The scope of work is categorized under NAICS code 488510 and is performed across British Columbia and Nova Scotia. Interested parties must respond by November 4, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Control Valve Assemblies (Part No. 250854F55AHMX1ZR)This subcontract involves the manufacture or procurement of specialized control valve assemblies, specifically part number 250854F55AHMX1ZR, for use in Cold Fresh Water Systems on HFX Class Ships. The project supports prime contractors working on Department of National Defence naval projects within Canada. To be eligible, the provider must maintain ISO 9001:2015 quality management certification and hold a valid registration with the Controlled Goods Program. The selected supplier is responsible for delivering the units DDP to CFB Halifax and CFB Esquimalt, ensuring that all shipments are accompanied by bilingual Safety Data Sheets. The contract falls under NAICS code 332911 and requires performance across British Columbia and Nova Scotia. Interested parties must respond by November 4, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Specialized Freight and Customs BrokerageThis subcontract involves specialized freight and customs brokerage services for prime contractors working on Department of National Defence projects for the Canadian Forces School of Military Engineering. The scope of work requires the transport of six UPS units and battery cabinets using heavy-lift vehicles, with final delivery to a specified bay door at 5CDSB Gagetown in Oromocto, New Brunswick. The contractor is responsible for managing all import duties, taxes, and customs brokerage services in accordance with DDP Incoterms 2020. This ensures a comprehensive delivery process from the point of origin to the final destination within the Government of Canada's military infrastructure.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Faulty Circuit Board Training AidsThis subcontract involves the supply of specialized faulty circuit board training aids for prime contractors working on Department of National Defence projects for the Canadian Forces School of Military Engineering. The selected provider will be responsible for the custom engineering and development of boards that simulate realistic faults in fans, voltage sensing, inverters, and rectifiers. These aids must be specifically compatible with the provided UPS model and designed to simulate failures without causing actual damage to the equipment. The contract requires the delivery of at least four faulty circuit board training aids, with performance taking place in Oromocto, New Brunswick. Interested parties must respond by November 3, 2026, to support this Government of Canada initiative under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Industrial UPS Units with Battery CabinetsThis subcontract involves the supply of six industrial uninterruptible power supply units and associated battery cabinets for the Canadian Forces School of Military Engineering. These units, ranging from 25kVA to 50kVA, feature 120/208VAC 3-phase power, galvanic isolation, and variable speed cooling. The delivery includes modular battery cabinets equipped with 12VDC batteries designed to provide 30 minutes of backup power. The project is managed under the Department of National Defence for the Government of Canada, with performance taking place in Oromocto, New Brunswick. The procurement process is categorized under NAICS code 335312, with a response deadline set for November 3, 2026.

Motor and Generator Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS