Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PISTON, AIRCRAFT HYD

Active
SPE4A7-26-Q-0891Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 50 aircraft hydraulic pistons with NSN 1650-00-510-2037 under solicitation SPE4A7-26-Q-0891, with a delivery deadline of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with RP001, while quality requirements for manufacturers and non-manufacturers are defined under RQ001. Configuration changes require formal Engineering Change Proposal requests per RQ002, and inspection and acceptance must occur at the origin under RQ009. Government identification must be removed from non-accepted supplies as per RQ011. Sampling protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Verification levels or AQL values are tied to critical, major, and minor attributes as defined. A Boeing Rights Guard License Agreement 01 restricts technical data usage, requiring compliance with data nondisclosure and destruction protocols, and vendors must complete required forms from the authorized portal. Export controls apply under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, and only DLA contractors with JCP certification, completed training, and approved access may handle the controlled technical data per DFARS 252.225-7048. The item has no shelf life requirement.

General Info

Procure 50 hydraulic pistons, NSN 1650-00-510-2037, deliver in 100 days, comply with DLA, MIL-STD, ITAR, and Boeing data restrictions.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A7-26-Q-0891

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Aaron Miles
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PISTON<(>,<)> AIRCRAFT HYD RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. A BOEING RIGHTS GUARD LICENSE AGREEMENT 01 RESTRICTED TECHNICAL DATA PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION CONDITIONS APPLY. VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN THE "01 BOEING RIGHTS GUARD" LICENSE AGREEMENT FOLDER AVAILABLE AT https://tdmt.dla.mil/TDMT/Client
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE4A7-26-Q-0891
SECTION B
SUPPLY/SERVICE: 1650-00-510-2037 CONT'D
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1650-00-510-2037 Quantity: 50 EA Purchase Request: 7017272903QTY: 50 Delivery: 100 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333995
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE4A7-26-Q-0917
The contract pertains to the procurement of four hydraulic accumulators with NSN 1650-01-558-4800 under solicitation SPE4A7-26-Q-0917, with a response deadline of August 10, 2026, and a delivery requirement of 200 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons, including foreign nationals within the United States, requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and received formal approval from the DLA controlling authority. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The contracting activity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTUATING, LINEAR
Solicitation # SPE7L1-26-R-0111
The contract is for the procurement of 154 units of the Cylinder Assembly, Actuating, Linear, identified by NSN 3040-01-642-5340, with a firm fixed price term and zero variance in quantity—no additions or reductions are permitted. The item is classified as a critical application item and must comply with DLA’s packaging requirements under RP001, including adherence to MIL-STD-2073-1E for prep, preservation, wrapping, cushioning, and unit container specifications, as well as MIL-STD-129 for marking with no special marking codes. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly authorized by the specification. Delivery is required within 276 days after the order date, with FOB origin, inspection and acceptance occurring at the destination. Two delivery points are specified: one at the DLA Distribution facility in New Cumberland, Pennsylvania, for 68 units, and another at the DLA Distribution facility in Tracy, California, for 86 units. All shipments must follow DLAD Proc Note C19 for transportation and C20 for first destination logistics. The contract, issued under solicitation SPE7L1-26-R-0111, references the DLA Master List of Technical and Quality Requirements for compliance, and the supplier must be JARP Industries, Inc. with part number 151234B. The required delivery date is February 6, 2027, and all technical and quality standards are controlled by the version of the DLA Master in effect on the solicitation issue date.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333995
New
International
NPP - ACTUATOR
Solicitation # RFP-2026-07-29-001
The Canadian Coast Guard Aircraft Services Directorate is seeking a single actuator with part number 412-301-300-103 under solicitation RFP-2026-07-29-001, which is open exclusively to pre-qualified suppliers holding supply arrangement T8493-140035. The request was posted on July 29, 2026, with responses due by July 31, 2026, at 3:00 p.m. Eastern Time, and performance of the contract is expected to take place within the National Capital Region. Only suppliers who have already met the pre-qualification criteria for the specified supply arrangement are eligible to respond, ensuring a restricted and vetted procurement process. The contracting authority is Yula Zourdos, who can be reached via email at yula.zourdos@tc.gc.ca or by phone at 343-552-8343, and further details about the opportunity are available through the official Canada Buys portal.
Canadian Coast Guard

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 333995
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-Q-0901
The contract is for the procurement of 46 piston hydraulic accumulators identified by NSN 1650-01-116-3036 under solicitation SPE4A7-26-Q-0901, with a response deadline of August 11, 2026, and a required delivery date 134 days after contract award. The item is governed by a suite of DLA technical and quality requirements identified by R-numbers, including packaging standards, inspection and acceptance protocols at the manufacturer’s site, and mandatory procedures for removing government identification from non-accepted supplies. The technical data associated with this item is subject to export control under either ITAR or EAR, and unauthorized disclosure to foreign persons—regardless of location—is prohibited. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. All documentation and delivery must comply with DLA-specific requirements as defined by the Master List of Technical and Quality Requirements in effect on the award date, and DFARS 252.225-7048 applies to safeguarding controlled technical data. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson designated as the point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-Q-1379
The contract specifies the procurement of a linear actuating cylinder assembly with a 2.000 inch bore and a compressed length of 340.0 millimeters, identified by NSN 3040-01-417-6191. A total of 50 units are required, broken into two lots of 20 and 30 units respectively, delivered under firm fixed price terms with no quantity variance allowed. Delivery is due within 220 days after award, with inspection and acceptance occurring at the manufacturer’s origin. The item is classified as a critical application and requires first article approval delegated to DCMA, with testing requirements governed by FAR clause 52.209-3. The cylinder must be manufactured to strict technical and quality standards referenced from the DLA Master List, including configuration change management, qualified manufacturer lists, and prohibitions against ozone-depleting chemicals. Packaging requirements mandate compliance with MIL-STD-2073-1E and SPI AK14176191, including VCI paper wrapping, hot-dip coating on the rod, protective caps on ports, and bubble-wrapped fiberboard enclosures labeled per MIL-STD-129 with specific directional markings. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned strict verification levels. Palletization and preservation follow DLA procurement guidelines, and shipments must be sent to designated DLA distribution centers in New Cumberland, PA, and Tracy, CA. All components must adhere to approved qualified lists and engineering controls, with deviations requiring formal waivers.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 333995
New
DIBBS
ACTUATOR TOOL
Solicitation # SPE4A7-26-R-X966
The contract is for the procurement of one Actuator Tool under NSN 5120-01-695-2765, issued as a Small Business Set-Aside under NAICS code 333995 with a firm fixed price structure and zero variance in quantity. Delivery is required 148 days after the delivery order is issued, with FOB destination terms placing transportation risk and responsibility on the contractor until receipt at the Government’s designated location. The item has no shelf life requirement, and unique item identification is not mandated per the Service customer’s request. The contractor must comply with stringent packaging standards per MIL-STD-2073-1E, including specific preservation methods, material codes, unit and intermediate containers coded as E5, and marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA Packaging Requirements for Procurement. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates multiple federal and defense acquisition regulations including FAR and DFARS clauses related to equal opportunity, cybersecurity, and safeguarding covered defense information, with active incorporation of the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment requirement. Covered defense information and physical identification of items are governed by specific provisions, and the contractor must ensure compliance with safeguarding and reporting obligations under 252.204-7012. The contract prohibits use of certain telecommunications equipment under the Federal Acquisition Supply Chain Security Act and requires representation of small business status through SAM. Invoicing must be processed exclusively through Wide Area WorkFlow (WAWF), and payment is subject to Government inspection and acceptance at destination. The total contract value is capped at $350,000, with no guaranteed minimum order value specified. Past performance, particularly supplier performance and delivery compliance, holds the highest evaluative weight under a trade-off evaluation method, with cost or price and other non-price factors weighted equally in importance. The solicitation is administered by the Department of Defense’s ASC Supplier Operations AE and AF Division, with Michael Kershaw as the point of contact, and proposals must be submitted via DIB
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER
Solicitation # SPE8EF-26-Q-0149
The contract is for the procurement of three cylinders identified by NSN 1730-01-107-7687 under solicitation SPE8EF-26-Q-0149, with a delivery deadline of 60 days after award. Technical requirements mandate the use of specific ASTM and MIL standards in place of older federal specifications, including ASTM E1444 instead of MIL-I-6868, SAE-AMS-STD-1595 in lieu of MIL-T-5021, and ASTM A519 and A331 replacing QQ-S-00629 and QQ-S-624 respectively, among other material and process substitutions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item includes controlled technical data subject to ITAR or EAR export regulations, requiring explicit authorization for any disclosure to foreign persons, including foreign nationals within the U.S., and DFARS 252.225-7048 governs handling. Access to this data is restricted to DLA contractors who have obtained JCP certification, completed required DOD export training, and received explicit approval from DLA. Additional requirements include compliance with DLA packaging standards, physical identification of bare items, removal of government identification from non-accepted supplies, and adherence to cybersecurity certification at CMMC Level 2. The contract is managed by the Department of Defense under the office of Construction & Equipment Manufacture and Construction, with Russell Keiser as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7M4-26-T-286J
The contract specifies the procurement of five hydraulic cylinder assemblies, identified by NSN 3040012765147 and part number 5122915-001-101, manufactured by Danfoss Power Solutions II LLC with model TG10EAGAXFAG6203. These cylinders are critical components for the missile positioner installation on a transporter erector semitrailer, designed to move missiles forward or aft to facilitate tie-down connections. Each assembly operates at a 4500 PSI power rating, is constructed of steel with nitrile seals, and measures 59.5 inches in length by 5.5 inches in width. The item is classified as a critical application item, subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with palletization strictly adhering to the specified guidelines. Delivery is set for 165 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit of issue is each, with no variance allowed in quantity, and the required delivery date is December 21, 2026, though the needed ship date is January 19, 2027. The contract, issued under solicitation SPE7M4-26-T-286J, includes provisions for handling covered defense information and mandates the removal of government identification from non-accepted supplies. Transportation and shipping instructions reference DLA procedural notes C19 and C20, with final delivery directed to DLA Distribution Depot Hill at Hill AFB, Utah.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
GLAND ASSEMBLY, ACCUMUL
Solicitation # SPE8EE-26-T-2171
The contract solicits 52 units of a GLAND ASSEMBLY, ACCUMULATOR, specifically a GLAND, KIT CYLINDER equipped with Viton seals, under NSN 3950-01-174-9066 and part number RG2AHL0105 from Parker Hannifin Corporation. Delivery is required within eight days of award, with FOB Destination terms, to the DDSP New Cumberland Facility in Pennsylvania. The item has a non-extendable 240-month (20-year) shelf life as a Type I (Code Z) item, requiring packaging, preservation, and labeling compliant with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32-32 to indicate shelf life status. Preservation must use method AE with controlled drying and no additional preservation compounds beyond what is inherent in the method. All packaging, preservation, and marking materials are strictly prohibited from containing mercury or mercury compounds per IP056 and NAVSEA 5100-003D, and portable fluorescent lamps or instruments containing mercury, if used, must be shockproof with a secondary containment barrier. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contract incorporates DLA’s Master List of Technical and Quality Requirements referenced by R-numbers, and all deliveries must be palletized per RP001. The contract is fixed-price, with inspection and acceptance occurring at destination under FAR 52.246-2, and invoicing must be submitted electronically via WAWF. Compliance with cybersecurity requirements including NIST SP 800-171 and safeguarding covered defense information per DFARS 252.204-7012 is mandatory, and the contractor must affirm compliance with prohibitions on covered defense telecommunications equipment. Offerors must hold a valid UEI and CAGE code and represent their small business status, with all submissions required through the DIBBS portal by August 3, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, REAC
Solicitation # SPE7L4-26-T-5760
The contract pertains to the procurement of cylinder assemblies, specifically gas springs designated for use on light armored vehicles, identified by NSN 2540011689885 and part number C16-09444A from SUPPLIER SUSPA, INCORPORATED. The item is classified as a critical application component requiring strict compliance with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. All units must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA Packaging Requirements for Procurement (RP001), with no special marking applied. The item is subject to zero quantity variance and is inspected and accepted at the destination. Deliveries are FOB origin with a 58-day delivery window. Three distinct line items total 92 units: 23 units at $23.00 each, 32 units at $32.00 each, and 37 units at $37.00 each, with shipment destinations including New Cumberland PA, Albany GA, and Barstow CA. Original delivery deadlines are set for February 22, 2027, though different ship dates are specified for each line item ranging from August 2027 to October 2026. The contract is issued under solicitation SPE7L4-26-T-5760, classified under NAICS code 333995, and managed by the Department of Defense’s Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-875H
The contract pertains to the procurement of 68 units of a cylinder assembly, actuating, linear, identified by NSN 3040-01-566-4370 and part numbers 3691710C91 from ND DEFENSE LLC and 1C-4992 from PARKER HANNIFIN CORP FLUIDPOWER. The item must be delivered within 168 days of contract award, with delivery terms set as FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging and labeling must adhere strictly to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a required ship date of January 19, 2027, though the original delivery target was January 10, 2027. The contract is part of a total small business set-aside under NAICS code 333995, issued under solicitation SPE7L1-26-T-875H, which was posted July 23, 2026, with proposals due August 3, 2026. Unit price is $68.00 per unit, totaling $4,624. All technical and quality specifications referenced by R or I numbers are controlled by the DLA Master List effective on the solicitation issue date. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Transportation logistics are governed by DLAD Proc Notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 333995
Federal
17--CYLINDER,VENTED
Solicitation # SPRPA126QYC88
The item identified by NSN 7R-1720-012857190-EY, a vented cylinder, is a flight-critical component requiring government source approval prior to contract award due to its incorporation of unclassified but militarily sensitive technology. Acquisition or repair of this item is restricted to previously approved government sources, as the technical data available does not support full and open competition, and the time required to approve a new supplier would delay fulfillment of critical fleet requirements. Only entities previously authorized by the government may submit offers without additional documentation; all other potential suppliers must submit complete source approval information per the NAVSUP Weapon Systems Support brochures, either for spares or repair, depending on their proposed activity. Offers lacking the required submissions or proof of an ongoing source approval request will be deemed nonresponsive. The government intends to award this contract to a sole source under FAR 6.302-1, with no obligation to compete even if other parties express interest. Potential offerors who believe they can supply this item as a commercial item must notify the contracting officer within 15 days of this notice. The response deadline is September 8, 2026, and deliveries are to be made FOB origin. Technical specifications, military standards, and related documentation may be accessed through ASSIST-Online or the DODSSP, while direct inquiries should be directed to the primary point of contact listed.
Pa DLA Aviation At Philadelphia

POSTED

7 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE4A7-26-T-599Y
The contract pertains to a parts kit for mechanical seal replacement, identified by the part number 110-004-19-0150 and NSN 1560-01-524-3353, with a single unit requirement. It is issued under solicitation SPE4A7-26-T-599Y by the Department of Defense through the ASC Supplier Oper AE and AF Division and is targeted for delivery to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City. The delivery deadline is 20 days after award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization standards under DLA packaging requirements. The item is designated as a critical application, with qualified suppliers including Atlantic India Rubber Co Inc, Kirkhill Inc, Rubbercraft Corporation of California, and Bell Textron Inc. Quality and procurement requirements are governed by tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers, incorporating technical and quality criteria from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are classified with specific verification levels or AQLs. Configuration changes require a formal engineering change proposal or variance request, and government identification must be removed from non-accepted supplies. Hazardous materials packaging must adhere to IP025 guidelines. The contract includes a required delivery date of July 31, 2026, and specifies a single unit at unit price of $1.00. Transportation is subject to DLA procedures, and the solicitation is open for response until August 6, 2026, with the primary point of contact being Jack Bolan at DLA.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONTRO
Solicitation # SPE4A7-26-T-599X
The contract specifies the procurement of a Thermostat, Flow Control with NSN 6685-01-368-0419 and part numbers 247-7133 and 2ET322, quantity of 366 units, to be delivered FOB origin within 171 days, with a required ship date of January 25, 2027, and original delivery date of January 18, 2027. The item is designated as a critical application and must comply with strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging and palletization follow DLA’s procurement guidelines, and the unit is delivered to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling rules defined by MIL-STD-1916 or ASQ H1331, and unspecified attributes treated as major. Configuration change management and deviation requests are governed under RQ002, while documentation for source approval must meet RC001 standards. Measurement equipment, technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract is a total small business set-aside under NAICS code 334519, issued as a solicitation on July 29, 2026, with responses due August 6, 2026. Unit of issue is each (EA), with no quantity variance allowed, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i).
Other Measuring and Controlling Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SPLICE, CONDUCTOR
Solicitation # SPE4A7-26-T-599S
This contract issued by the Defense Logistics Agency under solicitation SPE4A7-26-T-599S specifies the procurement of 25 units of conductor splice components, identified by NSN 5940-00-961-0479, from approved vendors including Ideal Industries Inc, Grove U.S. LLC, and United Equipment Accessories Inc, each with their respective CAGE codes and part numbers. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951 for packaging. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Physical marking and identification of items must follow RQ017 requirements, ensuring clear labeling per contract specifications. Delivery is required within five days of contract award, FOB origin, with zero variance allowed in quantity. Items must be packaged in accordance with MIL-STD-129 and DLA Packaging Requirements, palletized per RP001, and labeled with the specified Unit of Issue and Quantity per Unit Pack. Shipment must be sent via the fastest traceable method excluding parcel post to the Sierra Army Depot in Herlong, California, with identical freight and mark-for addresses. The required delivery date is July 24, 2026, and all items must be marked with designated government identifiers including the TCN and DIC codes. Inspection and acceptance occur at the destination, and only DLA authorized units of issue apply. The contract is managed under NAICS code 335931, with primary contact Jesse Saul at DLA, and is exclusively for federal government use.
Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SELECTOR SET, HYDRAU
Solicitation # SPE4A7-26-T-600K
The contract pertains to the procurement of a Hydraulic Selector Set with part number HP891501T, supplied by TACTAIR FLUID CONTROLS INC, CAGE 70236, identified by NSN 1630-00-939-8534. The item is classified as a Commercial Off the Shelf (COTS) product and is designated as a Critical Application Item requiring Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Delivery is mandated within 39 days of contract award, with FOB Origin terms and mandatory delivery to DLA Distribution Cherry Point in North Carolina. The required quantity is seven units, with no variance allowed in shipment quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Documentation requirements include compliance with DLA’s Master List of Technical and Quality Requirements, and the removal of government identification from non-accepted supplies. The solicitation number is SPE4A7-26-T-600K, issued with a response deadline of August 6, 2026, and the original required delivery date is January 28, 2027, though the need-by date is set for September 15, 2026. Unit price is $7.00 per unit, totaling $49.00, with procurement governed by Defense Federal Acquisition Regulation Supplement (DFARS) provisions and DoD unit of issue standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, WEA
Solicitation # SPE4A7-26-T-600E
The contract pertains to the procurement of a resilient weapon mount, identified by part number 26001578-101 and NSN 5342017278571, with a total quantity of ten units to be delivered under solicitation SPE4A7-26-T-600E. Delivery is required within 114 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with stringent quality standards including MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes held to a zero-defect acceptance criterion unless otherwise stipulated. The product must adhere to DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, using prescribed methods for protection, wrapping, and containment, and palletization must meet DLA guidelines. The item is classified as a critical application component under The Boeing Company’s specifications and is subject to cybersecurity compliance under CMMC Level 2 self-assessment, along with documentation mandates for source approval and removal of government identification from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping details governed by DLAD procedural notes C19 and C20. The contract was posted on July 29, 2026, with responses due by August 6, 2026, and the original required delivery date is set for May 5, 2027, while the needed ship date is November 29, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the procurement falls under NAICS code 332510, managed by the Department of Defense’s ASC Supplier Operations division.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, QUICK DISCONN
Solicitation # SPE4A7-26-T-599U
The contract is for a single unit of a terminal, quick disconnect, identified by NSN 5940-01-602-4565 and part number 12077412-L, under solicitation SPE4A7-26-T-599U. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but must fully comply with all DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination. The destination for delivery and marking is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, with shipping required via the fastest traceable means—parcel post is prohibited. The government use identifier, project code, and point of contact details are included for administrative tracking, and the required delivery date is July 24, 2026. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, and the unit of issue is the individual unit (EA). The buyer is APTIV SERVICES 3 (US), LLC, and the purchasing request number is 7017622935. All documentation must align with DLA procedures, and the supplier must ensure correct marking, packaging, and compliance with federal procurement standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PARTS KIT, FASTENER
Solicitation # SPE4A7-26-Q-0923
The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PANEL ASSEMBLY, ELEV
Solicitation # SPE4A7-26-Q-0883
The contract specifies the procurement of three PANEL ASSEMBLY, ELEV units under solicitation SPE4A7-26-Q-0883, with a delivery timeline of 210 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. The contract incorporates multiple DLA-specific requirements including packaging standards, tailored quality controls, configuration change management, inspection at origin, removal of government identification from non-accepted items, and export control of technical data subject to ITAR or EAR regulations. Disclosure of controlled technical data to foreign persons, regardless of location or citizenship, is strictly prohibited without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The item is identified by NSN 1560-00-766-6241, and contract administration is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-599V
This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, identified by NSN 5970-00-612-8492 and sold in units of 1 RO equaling 108 feet. The item is classified as a commercial item and must be manufactured in compliance with qualified products list QPL-19166-30 revision 30. Strict packaging requirements under MIL-STD-2073-1E and MIL-STD-129 apply, including special marking code 33 for Type II shelf life identification. The tape has a maximum shelf life of five years when stored between 50°F and 80°F with humidity below 75%, but compliance with RS001 mandates a non-extendable 12-month shelf life from manufacture, regardless of storage conditions. The material is designated as hazardous with HMIC code P, necessitating submission of a complete Safety Data Sheet package including warning labels and the required transmittal form to dscrchempol@dla.mil. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted in the sample unless otherwise stated, and verification levels for attributes are prescribed. All deliveries must be shipped via traceable freight means, not parcel post, to specified military addresses in Virginia Beach, Oak Harbor, and Norfolk. The contract includes four separate CLINs totaling six ROs with delivery due between June and July 2026, all subject to origin inspection and acceptance with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-599Z
This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
LATCH, VALVE
Solicitation # SPE4A7-26-T-600D
This contract specifies the procurement of a LATCH, VALVE with NSN 5342-01-193-7756 and part number S4127, for a quantity of 13 units, delivered FOB origin within 149 days of contract award, with no variance allowed in quantity. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific preservation methods, packaging materials, and unit container types. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or weapons systems, and even then, portable devices must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or a comparable zero-defect sampling plan, with verification levels and AQLs assigned to critical, major, and minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under inspection at the receiving warehouse, and non-conforming items must have government identification removed prior to return. The item must be palletized as directed by DLA packaging requirements, and shipping is directed to the DLA Distribution San Joaquin facility in Tracy, CA. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation issue date, and all compliance obligations are binding under the terms of SPE4A7-26-T-600D.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details