Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Plain Seal Extrusion Supplier

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 72 units of specialized plain seal extrusions for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Ops. The extrusions must be produced in 120-inch lengths and adhere strictly to Boeing P/N 10-60754-15 or Kirkhill Inc P/N 5673-15A specifications. All delivered materials must be free of Class I ozone-depleting chemicals and intentionally added mercury, while remaining in full compliance with the Buy American Act. The project falls under NAICS code 326130 and is designated for performance at Tinker AFB. Interested parties should note the response deadline of October 23, 2026, for this requirement concerning NSN 5330013047759.

General Info

Supply 72 specialized seal extrusions for DoD at Tinker AFB by October 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

326130 - Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-0624.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, PLAIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized plain seal extrusions for prime contractors on DLA Weapons Support Land Supplier Ops projects. Manufactures extrusions in 120-inch lengths meeting Boeing P/N 10-60754-15 or Kirkhill Inc P/N 5673-15A specifications. Materials must be free of intentionally added mercury and Class I ozone-depleting chemicals. Complies with Buy American Act. Delivers 72 units of Plain Seals (NSN 5330013047759).

Similar Contracts

Same NAICS industry code

Supply of High-Performance Rubber O-Rings (NSN 5331-01-478-9901)This subcontract involves the manufacture or procurement of 507 high-performance rubber O-rings for the DLA Weapons Support Land Supply Chain. The required parts must match NSN 5331-01-478-9901, Apple Rubber P/N AS-568A-248, or Oshkosh Corp P/N 3018994. All supplied materials must be certified as asbestos-free and adhere to strict military standards, specifically MIL-DTL-117 Type II Class C Style 1 for packaging and MIL-STD-129 for marking. The completed and certified units are to be delivered to DLA Distribution San Joaquin in Tracy, California. This requirement falls under NAICS code 326130 and is intended for prime contractors fulfilling Department of Defense supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE7L4-27-T-0297

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Thermoplastic Marking Material SupplyThis subcontract agreement involves the supply of high-visibility thermoplastic pavement marking materials for road projects managed by the Fayette County Board of Commissioners in Georgia. The selected provider is responsible for manufacturing and delivering white and yellow thermoplastic resin and beads that adhere to specific County and DOT standards, specifically for use on micro-surfaced pavement. The scope of work includes the delivery of bulk materials directly to project sites or designated contractor facilities. This opportunity is categorized under NAICS code 326130, with a response deadline set for October 16, 2026.

Fayette County Board of Commissioners

POSTED

DEADLINE

Manufacturing of Preformed Packing Rings (NSN 5330-00-442-8577)This subcontract involves the manufacturing of preformed packing rings under NSN 5330-00-442-8577 for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for delivering two sets of ten packing rings produced via precision molding or CNC machining using elastomers and polymers. All products must strictly adhere to the DLA Master List of Technical and Quality Requirements and ensure zero intentional addition of mercury in accordance with NAVSEA 5100-003D. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 326130. Compliance with the Berry Amendment and the Buy American Act is mandatory for all materials used. Interested parties must respond by October 22, 2026, to meet the requirements of this military specification project.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

HPL Office Work Surface SupplierThis subcontract agreement establishes a partnership for the supply of fixed-height and electric height-adjustable work surfaces for prime contractors working on Department of Justice Canada office projects. The scope of work involves the manufacture of rectangular High-Pressure Laminate surfaces ranging in size from 30x48 to 30x72. Electric models must be equipped with three-button digital displays, anti-collision safety devices, and integrated under-surface cable management systems. The contract requires the delivery of completed work surfaces FOB Destination to Ottawa, Ontario, within the National Capital Region. This opportunity is categorized under NAICS code 326130 and is specifically tailored to support government office infrastructure requirements for the Government of Canada.

Department of Justice

POSTED

DEADLINE

in about 20 hours

Butyl Rubber Seal & O-Ring Fabrication (PN 76D41637P1)This small business set-aside subcontract involves the manufacture and supply of preformed butyl rubber packing seals for Department of the Air Force projects. The contractor is responsible for the precision molding and machining of Part Number 76D41637P1, which serves as a critical seal between the mid and aft sections of the MK12A RV. Performance will take place in Ogden, Utah, under the oversight of the Department of Defense agency FA8206 Afsc Pzaca. Key deliverables include one First Article seal, a comprehensive Test Report generated according to DI-NDTI-80809B/T standards, and a Counterfeit Prevention Plan. The contract requires rigorous First Article testing to ensure technical compliance. Interested parties must respond by October 29, 2026, for this specialized fabrication effort categorized under NAICS code 326130.

FA8206 Afsc Pzaca (icbm)

POSTED

DEADLINE

Vinyl SheetingThis forecast announcement from Federal Prison Industries under the Department of Justice concerns the procurement of vinyl sheeting. The opportunity is classified as Full and Open/Unrestricted, meaning it is available to all qualified bidders regardless of business size or socioeconomic status. The project falls under NAICS code 326130 and is slated for performance in Cumberland, Maryland. Interested parties can coordinate with Kimberly Armfield as the primary point of contact or Robert L. Connolly for small business specific inquiries. Further details regarding this upcoming requirement can be found through the Department of Justice contracting opportunities portal.

Inc Federal Prison Industries

POSTED

DEADLINE

53--MOLDED INSERT

Solicitation # N0010425QFF37

This solicitation is for the procurement of Molded Inserts for use in critical shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific NAVSEA toxicity and flammability requirements. The contract mandates comprehensive material traceability, mercury-free construction, and a one-year warranty. Key requirements include the submission of a Certificate of Compliance and the performance of government source inspection via DCMA. All certification data must be submitted to the Portsmouth Naval Shipyard via Wide Area Workflow for review and acceptance prior to the final delivery of material. The deadline for the receipt of offers is October 30, 2026, at 4:30 PM EST.

Navsup Weapon Systems Support Mech

POSTED

about 1 month ago

DEADLINE

CORE MATERIAL, CELLULAR

Solicitation # SPE8E5-26-Q-0422

This solicitation from the Department of Defense, specifically Depot Hill, is for the procurement of 14 sheets of cellular core material under solicitation number SPE8E5-26-Q-0422. The material is specified as expanded cell condition with a nominal cell size of 3/16 inch and a nominal cell depth of 2.000 inches. It must have a nominal density rating of 2.0 pounds per cubic foot, a maximum density of 2.2 pounds per cubic foot, and a maximum service temperature limit of 250 degrees Fahrenheit. The dimensions are set at 48 inches in the ribbon direction and 96 inches in the transverse direction. The contract is subject to several strict regulatory and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It mandates compliance with Qualified Products Lists or Qualified Manufacturers Lists and is subject to stringent export controls under ITAR and EAR regulations. Technical data distribution is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training. Delivery is required within 60 days after receipt of order.

POSTED

about 2 months ago

DEADLINE

Pavement Marking & Striping (MMA & Thermoplastic)This subcontract for Pavement Marking and Striping involves providing specialized roadway striping services for prime contractors on Caltrans District 3 projects within the Marysville and Sacramento areas. The scope of work includes the application of MMA striping, the restriping of parking stalls with MMA, and the placement of new 6-inch thermoplastic EWNV striping. To ensure proper surface preparation, high-pressure water blasting will be utilized for the removal of existing thermoplastic. All operations must strictly adhere to Caltrans Standard Specification Section 14-8 to deliver high-quality rehabilitated pavement markings. The project is categorized under NAICS code 326130 and is managed by the California Department of Transportation, District 3.

Caltrans, District 3 - Marysville/Sacramento

POSTED

about 2 months ago

DEADLINE

Plastic Sheet Supply (NSN 9330-01-131-8091)The contract pertains to the supply of a specialized plastic sheet material identified by NSN 9330-01-131-8091, procured under a subcontract arrangement by the Defense Logistics Agency on behalf of the Department of Defense. The material is classified under NAICS code 326130, indicating it falls within the plastics product manufacturing sector. Delivery is subject to destination inspection to ensure compliance with technical and quality standards, and each unit must be permanently marked with continuous shelf-life information to support inventory management and operational readiness. The solicitation was posted on August 5, 2026, and the contract award is linked to the DIBBS system under reference SPE7MX23D0019 with delivery reference SPE7M126F4817. The place of performance and exact delivery location are not specified but imply global logistics support for Defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Plastic Sheet, Press Manufacturing and SupplyThe contract is for the manufacture and supply of a specific plastic sheet, press measuring 30.0 inches in length, 24.0 inches in width, and 0.005 inches in thickness, designed to meet stringent military and hazardous material labeling standards. This item is intended for use in defense-related applications where compliance with regulatory and safety protocols is critical, ensuring proper identification and handling in operational environments. The supplier must adhere to exact dimensional specifications and labeling requirements to ensure interoperability and safety across military logistics systems. The contract is classified as a subcontract under NAICS code 326130, which corresponds to plastic product manufacturing, and is issued by the Defense Logistics Agency under the Department of Defense. It was posted on July 15, 2026, and is available through the DIBBS system with the contract identifier SPE8E526P1285. No specific place of performance or point of contact details are provided, indicating that the logistical and delivery arrangements are likely managed centrally by the agency. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors without restrictions based on small business or other categories.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Supply of Turbo Superchargers (NSN 2950015645681)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, requires the supply of 24 brand-new non-aircraft engine turbo superchargers. The specific requirement is for NSN 2950015645681, which corresponds to Caterpillar part number 251-4820 or Oshkosh part number 14KP106. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 336312. The selected provider must adhere to strict logistics and security standards, including packaging per ASTM D3951, marking per MIL-STD-129, and palletization per RP001. Additionally, the contractor must possess the capability to handle Covered Defense Information and provide a CMMC Level 2 self-assessment. Responses to this solicitation are due by October 29, 2026.

Gasoline Engine and Engine Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Immobilization ServicesThis subcontract involves providing specialized military packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier. The scope of work requires the packaging of 140 units in strict accordance with MIL-STD-2073-1E, with a specific requirement for mandatory immobilization per paragraph .5.2.3.d. Additionally, the contractor must ensure all packages are marked according to MIL-STD-129 and Special Marking Code .ZZ, with palletization performed following RP001 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 488510. Performance of the contract will take place in Tracy, California. Interested parties must note the response deadline of October 26, 2026, for this Department of Defense requirement.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

High-Strength Spring Steel SupplyThis subcontract, titled High-Strength Spring Steel Supply, involves the provision of raw spring steel for prime contractors supporting DLA Weapons Support Land Supplier projects. The supplier is responsible for delivering certified raw spring steel stock that adheres to the specific chemical and physical properties outlined in Drawing NR 19207 8389626. To ensure compliance with Critical Application requirements, the contractor must provide comprehensive material certifications and Mill Test Reports. The opportunity is a total small business set-aside under NAICS code 331110, managed by the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt. Performance for this contract will take place in Tracy, California. Interested parties must respond by October 26, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Leaf Spring Manufacturing (Critical Application)This subcontract, issued by the Department of Defense for the DLA Weapons Support Land Supplier, requires the fabrication and assembly of 140 Leaf Spring Assemblies. The project is designated as a Critical Application Item and must be manufactured in strict accordance with Basic Drawing NR 19207 8389626 (Rev F) and associated reference drawings. The selected contractor must possess specialized heat treatment and spring forming equipment and is required to perform First Article Testing to ensure compliance with all technical standards. The opportunity is a Total Small Business Set-Aside under NAICS code 332111, with the place of performance located in Tracy, California. Interested parties must submit their responses by October 26, 2026. This contract focuses on high-precision manufacturing to support prime contractors on land supplier vehicle support projects.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Military Grade Packaging and Labeling ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for ammunition-related components supporting the Department of Defense through DLA Weapons Support Land Supplier Operations. The contractor is responsible for processing five individually packaged and labeled cartridge guides, ensuring all work adheres to ASTM D3951 packaging standards and MIL-STD-129 marking requirements. All activities must comply with the DLA Master List of Technical and Quality Requirements to ensure items are ready for shipment. The project is categorized under NAICS code 561910 and requires delivery to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. Interested parties must respond by October 25, 2026, to fulfill the requirements of this military-grade logistics support contract.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Ammunition Cartridge Guide ManufacturingThis subcontract involves the metal casting and precision machining of five ammunition cartridge guides for the Department of Defense, specifically supporting DLA Weapons Support projects. The contractor is responsible for casting and finishing parts to meet the exact dimensions and tolerances required for NSN 1005-01-498-5141, with performance taking place in Tracy, California. Compliance requirements include strict adherence to demilitarization standards for small arms parts and a prohibition on the use of mercury and Class I ozone-depleting chemicals. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity standards are met. The solicitation was posted on October 14, 2026, with a response deadline of October 25, 2026.

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Special Shaped Nonmetallic SealsThis subcontract involves the manufacture and supply of 120 special shaped nonmetallic seals for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for fabricating the seals according to NSN 5330-01-225-3892 and ensuring all items are packaged in medium duty, waterproof, greaseproof, opaque bags in compliance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, all shipments must be marked in accordance with MIL-STD-129 and MIL-STD-2073-IE. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 26, 2026, for this requirement categorized under NAICS code 326220.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Gaskets (Ring, Weld Pan) - NSN 5330015711697This subcontract involves the manufacture and supply of three non-asbestos weld pan ring gaskets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land agency. All parts must be produced or sourced according to NSN 5330015711697 specifications and include the necessary safety data sheet documentation. The contractor is required to adhere to strict packaging and marking standards, utilizing medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with shipments marked according to MIL-STD-130N and MIL-STD-129. Performance for this contract is based in New Cumberland, Pennsylvania, with a response deadline of October 26, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

TURBO SUPERCHARGER, ENG

Solicitation # SPE7L3-27-U-0017

Solicitation SPE7L3-27-U-0017 is a unilateral indefinite delivery contract issued by the Defense Logistics Agency for the procurement of 24 turbo superchargers for engines, identified by NSN 2950015645681. This acquisition is a total small business set-aside under NAICS code 336412. The contract specifies a delivery timeline of 63 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key compliance mandates include CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and safeguarding of covered defense information. The contract is governed by various FAR and DFARS clauses covering fixed-price changes, cybersecurity reporting, and the prohibition of certain telecommunications equipment.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L3-27-T-0880

Solicitation SPE7L3-27-T-0880 is a request for quotations for the procurement of 120 units of nonmetallic special shaped section seals, identified by NSN 5330-01-225-3892. This critical application item must be manufactured in accordance with Technical Data Package Revision B Gen 2 and associated drawings. The contract is issued by the DLA Weapons Support Land Supplier Ops Vehicle Spt, with a required delivery date of October 31, 2027, and a need ship date of April 8, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Due to ultraviolet sensitivity, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. The items carry a non-extendable shelf life of 240 months. Prohibitions are in place regarding the use of asbestos, class I ozone depleting chemicals, and the intentional addition of mercury. Offerors must comply with the Buy American Act and Berry Amendment domestic sourcing requirements and provide a Safety Data Sheet for any hazardous materials to be considered responsible for award. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012) and HUBZone small business preferences. The procurement is conducted under full and open competition, with quotes submitted through the DLA-BSM Internet Bid Board System.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

SPRING ASSEMBLY, LEAF

Solicitation # SPE7L3-27-T-0879

Solicitation SPE7L3-27-T-0879 is a total small business set-aside for the procurement of 140 leaf spring assemblies, identified by NSN 2510000562174. The contract is issued by the DLA Weapons Support Land Supplier Operations and requires delivery to DLA Distribution San Joaquin in Tracy, California, by December 30, 2027. This is a critical application item requiring a First Article Test (FAT) and technical inspection at the actual manufacturing facility. The contractor must adhere to specific technical data packages and quality assurance provisions, including TDP and QAP 8389626, and maintain a quality system compliant with SAE AS9003 or ISO 9001. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, with a mandatory requirement to immobilize the items. Sampling and inspection will be conducted at the origin according to MIL-STD-1916 or ASQ H1331. Key regulatory compliance includes the Buy American Act, the prohibition of Class I ozone-depleting chemicals, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing. All quotes must be submitted via DIBBS, and the procurement is governed by NAICS code 336211.

Motor Vehicle Body Manufacturing

POSTED

about 6 hours ago

DEADLINE

GUIDE, CARTRIDGE, AMMUNI

Solicitation # SPE7L3-27-Q-0032

Solicitation SPE7L3-27-Q-0032 is a request for quotes for the procurement of five ammunition cartridge guides, identified by NSN 1005-01-498-5141. This firm fixed price acquisition is managed by the DLA Weapons Support Land Supplier Ops Vehicle SPT, with a delivery requirement of 194 days after order. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The manufacturing process involves metal casting, and the government may provide non-interference rent-free tooling as government furnished property if required. Strict technical and quality standards apply, including CMMC Level 2 self-assessment, demilitarization requirements for small arms parts, and prohibitions against the use of Class I ozone-depleting chemicals and intentionally added mercury. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements take precedence. All invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS