This Solicitation opportunity from New Hampshire was posted on September 17, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Plan File Cabinet for Register of Deeds

Closed

RFP# 20240918State & Local

Submission Closed10/02/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 337214

New

Federal

Sources Sought for configuration, furnishing and installation and of office furniture.

Solicitation # W911QX27QA004

The U.S. Army Research Laboratory is issuing a Sources Sought Notice, solicitation number W911QX27QA004, to conduct market research for the configuration, furnishing, and installation of office furniture at the Aberdeen Proving Ground in Maryland. The scope of work includes the procurement and installation of various Crescendo 622 electrical components, panels, trim, and seating, such as CXO Mid-Back Task Chairs and Torsion Air Four-Leg Armless Chairs. Additionally, the contractor must remove and dispose of nine existing mobile storage units located on a raised floor. All delivery and installation must be completed FOB Destination within 60 days of the contract award. This notice is intended to identify capable industry sources, with a strong emphasis on participation from small businesses, including 8(a), HUBZone, SDVOSB, WOSB, and EDWOSB entities. The primary NAICS code for this requirement is 337214. Interested parties must submit their business type, size status, and socioeconomic categories via email to Contract Specialist Melissa Murphy by November 2, 2026. As this is a market research survey and not a formal request for proposal, no formal evaluation factors or pricing estimates have been established at this time.

POSTED

DEADLINE

Office Furniture - Site Visit Required - 100% Small Business Set-Aside

Solicitation # N6600127Q6018

Solicitation N66001-27-Q-6018 is a 100% Small Business Set-Aside for the Naval Information Warfare Center (NIWC) Pacific to acquire design services and Furniture, Fixtures, and Equipment (FF&E) for multiple rooms across Buildings A33, A35, and A40 in San Diego, California. The project involves creating furniture plans and providing FF&E for eight specific rooms, with a required period of performance of 8 to 12 weeks following the award. This is a Firm-Fixed-Price contract under NAICS code 337214, with a small business size standard of 1,100 employees. Interested offerors must be an Authorized Source and maintain active registration in the System for Award Management (SAM). The government will award the contract to the responsive vendor whose quote is most advantageous, utilizing a trade-off analysis where non-cost factors—specifically design quality and FF&E quality—are significantly more important than price. Design evaluations will focus on space utilization, traffic flow, and aesthetic appeal. Site visits are scheduled for November 2nd and 3rd, 2026, and must be coordinated with James Blake by October 30th, 2026. All questions are due by November 16th, 2026, and the final RFQ closing date is November 27th, 2026. Submissions must include design layouts, AutoCAD drawings, a Bill of Materials, and an estimated project schedule in PDF or Excel format.

POSTED

DEADLINE

Department of Justice Canada - CAT 1,2,3,5,6 Office Furniture

Solicitation # 1000037089

The Department of Justice Canada is soliciting offers for the purchase, delivery, and installation of office furniture to be delivered to 284 Wellington Street in Ottawa, Ontario, by January 25, 2027. This requirement is restricted to holders of the Workspaces Supply Arrangement (SA) series E60PQ-140003/D and covers Product Categories 1, 2, 3, 5, and 6, including workstation systems, work surface products, filing and storage, ancillary products, and collaborative products. The procurement follows the PSIB stream, and the contract will be awarded to the compliant offer with the lowest evaluated price, with evaluations conducted on a per-category basis. Under Amendment 001, the solicitation end date was extended to November 5, 2026, and the scope was modified to remove the Category 6 Collaborative Table and its associated installation table while updating task light specifications. Technical requirements mandate that furniture meet ANSI/BIFMA X5.5 and UL 962 standards, utilize SCS Global GreenGuard Gold certified low-emitting adhesives, and incorporate FSC-certified wood cores. Additionally, the contractor must adhere to strict green procurement policies, ensuring packaging is reusable, returnable, or recyclable. Delivery is required under DDP Incoterms 2020, and there are no security requirements associated with this contract.

Department of Justice

POSTED

DEADLINE

EF926-261591 - PSIB - Purchase under the Furniture SA for category 6 for the New Montreal Justice Complex LOT 3

Solicitation # WS5917863319

The Department of Public Works and Government Services is issuing a request for proposal for the purchase, delivery, and installation of office furniture for Lot 3 of the New Montreal Justice Complex in Montreal, Quebec. This solicitation is being conducted under the supply arrangement E60PQ-140003/D specifically for category 6 furniture requirements. Interested parties must submit their responses by the deadline of November 3, 2026. The project is managed by the Government of Canada under solicitation number WS5917863319 and falls under NAICS code 337214. Corine Lavoie serves as the primary contracting authority for this federal procurement opportunity.

Department of Public Works and Government Services

POSTED

DEADLINE

NKAO Office Furniture

Bureau of Reclamation

POSTED

DEADLINE

EC - ECAO Fire Extinguisher Maintenance

Bureau of Reclamation

POSTED

DEADLINE

OMPC Cubicles-Youngstown

Solicitation # SRC0000041796

The Ohio Department of Rehabilitation and Corrections is seeking a comprehensive quote for the design, procurement, and installation of four Herman Miller AO2 workstations or an approved equal at 884 Coitsville Hubbard Road in Youngstown, Ohio. The scope of work requires the vendor to provide CAD drawings, a detailed parts list with finish information, as-built plans, and electrical wiring diagrams. Installation must be completed within three weeks of the award during normal business hours, with the vendor responsible for site cleanliness, trash removal, and attending all project meetings. A mandatory site visit was scheduled for October 28, 2026, and all bids must be submitted through the OhioBuys Supplier Portal by November 2, 2026. Quotes must be itemized by service, detailing the quantity of hours and cost per hour for design and installation, while product costs must include list price, discount percentage, and final purchase price. In accordance with Ohio Executive Orders 2019-12D and 2022-02D, contractors are prohibited from utilizing offshore services or contracting with Russian institutions. Bidders must provide disclosures regarding the principal location of business and the specific locations where all services will be performed and state data will be accessed or stored.

Drc100000 Operation Support Center Drcfra

POSTED

DEADLINE

Office Furniture Supply (Workstations)This subcontract involves the manufacture and delivery of branded office furniture for prime contractors supporting Marine Corps Recruiting Command projects in Quantico, Virginia. The scope of work includes providing recruiter and visitor chairs, work desks for SNCOIC and NCO personnel, testing area desks, monitor arms, mobile pedestals, and desk lamps. All items must be produced according to the technical specifications detailed in sections 2.1.1 through 2.1.10 and delivered as specified in the contract line item numbers. The project is managed under the Department of Defense for the Commanding General and falls under NAICS code 337214. A critical requirement for this contract is strict adherence to Buy American and Berry Amendment standards. Interested parties should note the response deadline of November 6, 2026.

POSTED

DEADLINE

MCRC Branded Furniture FY27

Solicitation # M9549227BRANDFURN

The Marine Corps Recruiting Command is seeking a contractor to provide a nationwide turnkey solution for the project management, delivery, assembly, installation, and disposal of standardized, commercial-grade branded furniture. This requirement covers approximately 1,500 locations, including Recruiting Substations, Officer Selection Sites, Permanent Contact Stations, and Temporary Recruiting Facilities across the 1st, 4th, 6th, 8th, 9th, and 12th Marine Corps Districts. The anticipated contract structure is a Requirements Contract with a five-year ordering period, governed by FAR Parts 12 and 15. The scope includes a variety of items such as recruiter and visitor chairs, work desks, lounge furniture, and filing cabinets, all of which must adhere to the USMC Recruiting Facility Brand Guidelines of 2012 and meet BIFMA and ANSI quality and safety standards. Logistical capabilities are critical, as the contractor must perform inside-delivery and disposal at various sites throughout the continental United States. Compliance with the Buy American Act, the Nonmanufacturer Rule, and the Berry Amendment is mandatory for specific items. To ensure durability and aesthetic alignment, the government will require an in-person physical display evaluation during the source selection phase, involving both destructive and non-destructive testing. This current effort is a Sources Sought notice to conduct market research; interested vendors must submit a company profile, a completed capability and logistics questionnaire, and a non-binding Rough Order of Magnitude estimate for the base year and four option years by November 6, 2026.

POSTED

DEADLINE

Contractor REDISTRICT to provide AIS manufactured Matrix system furniture; AIS Calibrate furniture and installation services for Phase 1 of IN offices.The Department of Energy Office of Management is forecasting a contract for REDISTRICT to supply and install AIS manufactured Matrix system furniture and AIS Calibrate furniture. This project is designated for Phase 1 of the IN offices located in the District of Columbia. The procurement is categorized under NAICS code 337214 and is identified as a small business set-aside. Naomi Robinson serves as the Small Business Program Manager for this effort, which follows previous services provided by the incumbent contractor, SupplySource DC, LLC.

POSTED

DEADLINE

Contractor REDISTRICT to provide AIS manufactured Matrix system furniture; AIS Calibrate furniture and installation services for the National Nuclear Security Administration (NNSA) Office secure spac…Contractor REDISTRICT is tasked with providing AIS manufactured Matrix system furniture and AIS Calibrate furniture, along with comprehensive installation services, for the National Nuclear Security Administration Office secure space as part of the BG-056 project. This procurement is managed by the Department of Energy's Office of Management and is designated as a small business set-aside under NAICS code 337214. The project is located in the District of Columbia and is currently listed as a forecast with a posted date of October 25, 2026. Naomi Robinson serves as the Small Business Program Manager for this effort, which identifies SUPPLYSOURCE DC, LLC as the incumbent contractor.

POSTED

DEADLINE

re|District to provide Manufacture AIS Matrix system furniture and AIS Calibrate modular laminate furniture to expand existing CESER installations and installation services.The Department of Energy Office of Management is forecasting a contract for re|District to supply and install AIS Matrix system furniture and AIS Calibrate modular laminate furniture. This procurement is intended to expand existing CESER installations within the District of Columbia. The project is categorized under NAICS code 337214 and is designated as a small business set-aside. SupplySource DC, LLC is listed as the incumbent contractor for these services.

Office of Management

POSTED

3 days ago

DEADLINE

N/A

AI Contract Overview

The Merrimack County Register of Deeds has issued a competitive solicitation for a single plan file cabinet designed to accommodate 24" x 36" documents, with a preference for units manufactured by Ulrich Fabrication, Inc., Item # 3624. The cabinet must be fire- and water-resistant and will include provisions for sixty folders, sixty labels, and casters for mobility. The project aims to enhance document storage security and organization for the Register of Deeds office in Merrimack County, New Hampshire. The solicitation, identified as RFP# 20240918, was posted on September 17, 2024, with a response deadline of October 2, 2024. The contract value is estimated to range between $1,000 and $5,000. Interested vendors can contact Jonathan Gardner via email for further details. Bidders are directed to the provided online link for additional information and to submit their proposals.

General Info

Agency

New Hampshire → Merrimack County

NAICS

337214 - Office Furniture (except Wood) Manufacturing

Place of Performance

NH, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 17

Solicitation

Response DeadlineOct 2

Deadline has passed

Submission Closed

10/02/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew Hampshire → Merrimack County

Contacts1 person available

OfficeN/A

Organization / Agency

New Hampshire → Merrimack County

Office AddressN/A

Contacts

Jonathan Gardner

contact@example.gov

Full Description

RFP# 20240918 - Plan File Cabinet for the Register of Deeds in Merrimack County, New Hampshire. The Register of Deeds is inviting competitive bids for a single Plan File Cabinet. The preferred specifications include Ulrich Fabrication, Inc. Item # 3624, designed to hold documents sized 24" x 36". The cabinet should be resistant to fire and water and will include sixty (60) folders, sixty (60) labels, and casters.