Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLASTIC MOLDING MAT

Active
SPE8E5-26-T-3859Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 38 units of a Plastic Molding Mat with NSN 9330-01-672-6985 and part number 355-02310 under solicitation SPE8E5-26-T-3859, issued as a Total Small Business Set-Aside. The item is priced at $38.00 per unit with no variance allowed in quantity, and delivery is required FOB origin within 139 days, with an original delivery deadline of October 17, 2026, and a need ship date of January 4, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements RP001. If the material is hazardous per Fed-Std-313, it must be packed according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable but subject to DLA requirements. Inspection and acceptance occur at destination, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. Shipping instructions direct delivery to DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation protocols governed by DLAD Proc Notes C19 and C20. The contract was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326199, and primary point of contact is Don Trachtman.

General Info

Procurement of 38 Plastic Molding Mats at $38 each, FOB origin, delivery due by October 17, 2026, to Robins AFB.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(1)

RFQ SPE8E5-26-T-3859 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Don Trachtman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC MOLDING MAT
PLASTIC MOLDING MAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STRATASYS, INC 1GKB4 P/N 355-02310
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422166 0001 EA 38.000
NSN/MATERIAL:9330016726985
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE8E5-26-T-3859
SECTION B
PR: 7017422166 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:01/04/2027 Original Required Delivery Date:10/17/2026
SPE8E5-26-T-3859 NSN/Part Number: 9330-01-672-6985 Quantity: 38 EA Purchase Request: 7017422166QTY: 38 Delivery: 139 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326199
New
DIBBS
Supply of Cushioning Pads (NSN: 1680016028732)The contract requires the procurement and delivery of three units of plastic cushioning pads identified by NSN 1680016028732, intended for military packaging and logistics applications. These items must be supplied as commercial off-the-shelf products but must fully comply with applicable military specifications to ensure suitability for defense use. The solicitation is structured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The NAICS code 326199 indicates classification under other plastic product manufacturing, reflecting the nature of the item’s production. The opportunity was posted on August 5, 2026, with a firm response deadline of August 13, 2026, providing a limited window for submissions. All proposals must meet the technical and regulatory standards expected for military-grade packaging materials, and bidders are expected to align with the defined specifications without deviation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326199
New
DIBBS
Drum Liner Supply and PackagingThe contract requires the supply of 1,120 drum liners identified by NSN 8110013343149, with all items needing to be properly packaged, labeled, and delivered in full compliance with federal packaging and marking standards. The work encompasses strict adherence to regulatory requirements to ensure the integrity and traceability of the materials throughout the supply chain. All deliverables must be processed and shipped to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Containers organization, with a NAICS code of 326199. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contract is administered through the DLA MilWeb system, with all details accessible via the provided UI link. Contractors must meet all technical, procedural, and compliance obligations outlined by federal guidelines to qualify for award.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Black Lacing Tape Manufacturing (A-A-52080B)
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract demands the supply of ESD/EMI protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically designed to safeguard sensitive microcircuit leads from electrostatic discharge and electromagnetic interference. The packaging must include form-fitting cushioning elements engineered to securely hold and isolate components during transport and storage, ensuring product integrity under demanding military and aerospace conditions. All materials must be DOD-qualified and fully compliant with applicable defense standards, with no deviations permitted without prior approval. The opportunity is structured as a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance required at a designated location in Columbus, Ohio, zip code 43213. The NAICS code 326199 indicates the work falls under other plastic product manufacturing, underscoring the specialized nature of the packaging production. The solicitation was posted on August 5, 2026, with a hard deadline for responses set for August 17, 2026, and interested parties must submit proposals through the official DIBBS platform linked in the documentation. No set-asides or small business preferences are specified, and the procurement is open to qualified subcontractors capable of delivering fully compliant packaging solutions at scale.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Plastic Sheeting Supply – 48–60 Inch Width, 0.001 Inch Thickness, 500+ FT LengthThe contract calls for the supply of red or purple plastic sheeting with specific dimensional and material requirements: width between 48 and 60 inches, thickness of exactly 0.001 inch, and a minimum length of 500 feet per roll. The product must comply with all federal labeling standards and hazardous materials documentation protocols to ensure safe handling and regulatory adherence. This is a subcontract under NAICS code 326199, issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside classification specified. Suppliers must meet all technical and compliance criteria to be considered for award.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
Supply of Nylon Fibrous RopeThe contract involves the procurement and delivery of commercial-grade nylon fibrous rope in designated lengths, with all items required to be properly packaged, labeled, and shipped in accordance with military standards. The supplier must ensure the product meets rigorous specifications for durability, strength, and consistency to support operational needs under demanding conditions. The place of performance is specified as San Diego, California, with the final delivery point located at the zip code 92136-3581, indicating the contract is intended to fulfill logistical requirements for a Defense Department facility in that region. The opportunity is classified as a subcontract under the NAICS code 326199, which pertains to other plastic product manufacturing, and is open for response until August 17, 2026, with the solicitation posted on August 5, 2026. Although the solicitation number is not provided in the data, the official reference can be accessed via the DIBBS platform at the specified URL. The contracting entity is the Department of Defense under the agency name Construction & Equipment Manu & Con, underscoring the military’s need for reliable, standardized rope systems. There is no set-aside classification indicated, meaning the contract is open to all eligible contractors without preferential treatment for small businesses or other designated categories.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
MOLDING, PLASTIC
Solicitation # SPE8E5-26-T-3855
The contract pertains to the procurement of a plastic molding item identified by NSN 9330-01-276-1782 and part number 342-83004-1, supplied by BRISTOL AEROSPACE LTD in Winnipeg, Canada. A total quantity of 31 units is required at a unit price of $31.00, with delivery scheduled 148 days after contract award, FOB origin, and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with MIL-STD-130N for identification marking of U.S. military property. Packaging must adhere to DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous materials must be commercially packaged per ASTM D3951 unless otherwise directed by DLA requirements, and all packaging and labeling must follow MIL-STD-129. Palletization is mandatory per DLA Packaging Requirements. The item is not classified as hazardous under FED-STD-313, so special hazard packaging is not required. Delivery must be made to DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with a need ship date of June 30, 2026, and an original required delivery date of April 2, 2027. The solicitation number is SPE8E5-26-T-3855, issued under a federal procurement process with a NAICS code of 326199, and responses were due by August 17, 2026. All technical and quality specifications are governed by the DLA Master List referenced in the solicitation, and transportation logistics must follow DLAD Proc Notes C19 and C20.
JACKSONVILLE BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3857
The contract specifies the procurement of FILAMENT, ADDITIVE M with NSN 9330016983414 and part number 355-02142 from STRATASYS, INC, for a quantity of 2 units at a unit price of $0.000, totaling $0.000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede ASTM D3951 if applicable. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with hazardous material requiring adherence to TQ requirement IP025 according to FED-STD-313, while non-hazardous material must meet commercial packaging standards unless overridden by DLA directives. Delivery is FOB origin with a 167-day delivery window, original required delivery date of October 15, 2026, and a needed ship date of February 1, 2027. Inspection and acceptance occur at destination with zero variance allowed. Packaging and marking must include the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. The shipment destination is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3857, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326199, and point of contact is Khue Nguyen at DLA.
ALBANY TRANSPORTATION OFFICER

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
PLASTIC MOLDING MAT
Solicitation # SPE8E5-26-T-3852
The contract solicitation SPE8E5-26-T-3852 issued by the Department of Defense through Warner Robins DLA solicits 28 units of a Plastic Molding Mat identified by NSN 9330016726993 and part number 355-03220 from Stratasys Inc, with a unit price of $28.00 and a total value of $784.00. Delivery is required FOB Origin, with full acceptance and inspection to occur at the destination—specifically at DLA Distribution Warner Robins, Building 376, Robins AFB, GA 31098-1887—within 167 days after award, with an original target delivery date of December 1, 2026 and a need ship date of February 1, 2027. The solicitation is structured as a total small business set-aside under NAICS code 326199, and offers must be submitted electronically via the DLA Internet Bid Board System by August 17, 2026. Packaging and marking must strictly adhere to MIL-STD-129, including barcoding and labeling specifications, with palletization required under RP001 DLA Packaging Requirements. If the item is classified as hazardous under FED-STD-313, it must conform to TQ Requirement IP025; otherwise, commercial packaging under ASTM D3951 applies, though MIL-STD-129 supersedes all other packaging standards. The contract mandates compliance with DFARS clauses related to hazardous material identification, safety data sheet submission prior to award, and labeling per OSHA’s Hazard Communication Standard, and requires adherence to NIST SP 800-171 cybersecurity requirements and flowdown of subcontractor limitations for commercial products. All contractors must maintain a valid Unique Entity ID and CAGE code, and provide accurate size and socioeconomic status representations consistent with the small business set-aside. Invoicing must be processed exclusively through WAWF, and payment is subject to DFARS clauses on levies and unauthorized obligations. No contract modifications, options, or alternate delivery terms are specified beyond the base quantity and delivery window, and no evaluation factors are explicitly defined in the solicitation, suggesting a Lowest Price Technically Acceptable basis for award.
WARNER ROBINS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
SEAT, WATER CLOSET
Solicitation # SPE8E8-26-T-4972
The contract solicits six water closet seats under NSN 4510-01-056-3442 for delivery within 167 days after order placement, with a purchase request number of 7017758140. The solicitation, issued under SPE8E8-26-T-4972, was posted on August 5, 2026, and responses are due by August 17, 2026. It is governed by the DLA Master List of Technical and Quality Requirements, which incorporates all referenced technical and quality standards identified by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The contract requires compliance with DLA packaging standards and includes provisions for the removal of government identification from non-accepted supplies. Covered defense information may apply, and performance is designated to Tinker AFB, Oklahoma, 73145-8000. The contracting office is under the Department of Defense, specifically Depot Oklahoma, with Alexis Selby designated as the primary point of contact, reachable via email and phone. The NAICS code 326199 indicates the product falls under other plastic product manufacturing, and no set-aside type is specified.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
TREAD, NONMETALLIC, N
Solicitation # SPE8E5-26-T-3898
This contract pertains to the procurement of 98 units of a nonmetallic tread identified by NSN 7220-01-542-1096 under solicitation SPE8E5-26-T-3898, with a delivery requirement of 77 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Drawings are accessible only during the open solicitation period via the DIBBS portal, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item involves technical data subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons or entities, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The contracting activity is the DDSP New Cumberland Facility, with the primary point of contact being Devin Duffy, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326199
New
DIBBS
TREAD, NONMETALLIC, N
Solicitation # SPE8E5-26-T-3892
The contract solicitation SPE8E5-26-T-3892 is for 171 units of a nonmetallic tread item identified by NSN 7220-01-542-1100, with a delivery requirement of 77 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. Drawings are available only during the open solicitation period via the DIBBS portal. Technical data associated with this item is subject to export controls under ITAR or EAR, and distribution is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized access via the DLA questionnaire. DFARS 252.225-7048 governs the handling of this controlled data, which includes restrictions on disclosure to foreign persons regardless of location. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Devin Duffy, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 484220
New
DIBBS
Transportation & Delivery Logistics (FOB Origin)The contract is for the transportation and delivery of packaged defense items under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they are loaded at the origin point. It must comply with DLAD procurement notes C19 and C20, which govern specific logistical and documentation requirements for defense-related shipments, and requires accurate reporting through the Wide Area Workflow system to ensure full traceability and compliance. The contract is classified as a subcontract under NAICS code 484220, indicating it pertains to truck transportation for freight and goods. Performance is tied to Robins AFB, Georgia, with the associated zip code 31098-1887, establishing the operational location for delivery purposes. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the Warner Robbins organization. The contract is accessible through the DIBBS platform for further details and submissions.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military Packaging, Labeling & Barcoding ServicesThe contract requires end-to-end packaging, palletization, labeling, and application of 2D Data Matrix barcodes compliant with MIL-STD-129 and DLA RP001 standards, ensuring military-grade handling and traceability of supplied items. All work must adhere strictly to Department of Defense specifications for durability, legibility, and data accuracy in barcoding to support logistics and inventory management across military supply chains. The solicitation is classified as a subcontract under NAICS code 561910, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is required at Robins AFB, Georgia, 31098-1887, under the oversight of the Warner Robins organization within the Department of Defense. The opportunity does not specify a set-aside type or point of contact, and bidders must access the full solicitation via the provided DIBBS link to ensure full compliance with all technical and procedural requirements.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & DocumentationThe contract entails the identification, labeling, and pre-award documentation of hazardous materials to ensure full compliance with OSHA and Department of Defense standards. This includes the preparation and submission of Hazard Warning Labels, Material Safety Data Sheets, and Safety Data Sheets, all of which must meet rigorous federal safety and regulatory requirements. The work is focused on supporting defense operations by providing accurate, timely, and compliant documentation prior to award, ensuring safe handling, storage, and transportation of hazardous substances across military supply chains. The contract is classified as a subcontract under NAICS code 541620, with performance required at Robins Air Force Base, Georgia, zip 31098-1887. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The contracting activity is managed by the Warner Robins division of the Department of Defense, and while no set-aside status or specific point of contact is provided, interested parties must submit all documentation and confirm compliance through the designated DIBBS platform prior to the deadline.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
Defense-Grade Metal Sheet SupplyThe contract mandates the procurement and delivery of a single unit of a defense-grade metal sheet identified by NSN 9535016031832, with an absolute requirement for zero tolerance in quantity variance, ensuring precise adherence to the specified amount. All deliverables must fully comply with military packaging standards to guarantee integrity during transport and storage within defense logistics systems. The procurement is structured as a subcontract under NAICS code 331221, indicating fabrication of rolled metal products, and is managed by the Department of Defense through the Warner Robins office. Performance of the contract is to be completed at Robins AFB with a zip code of 31098-1887, reflecting the designated delivery location. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions applicable. The contract is accessible via the DIBBS portal for qualified vendors to submit proposals under strict compliance requirements.
Rolled Steel Shape Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 315990
New
DIBBS
Supply of Spray Socks (NSN: 4240013359883)
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 483111
New
DIBBS
Domestic Ocean Transportation Compliance (U.S.-Flag Vessel Shipping)This contract requires the arrangement and documentation of ocean transportation for supplies using U.S.-flag vessels, strictly adhering to the Defense Federal Acquisition Regulation Supplement clause DFARS 252.247-7023 and applicable cargo preference laws. The performance of this subcontract is centered at Robins Air Force Base with a zip code of 31098-1887, and all shipping activities must ensure compliance with federal mandates that prioritize the use of American-owned and operated vessels for transporting government cargo. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is classified under NAICS code 483111, which pertains to coastal and inland water freight transportation. The contracting activity is linked to the Department of Defense through the Warner Robbins office, and bidders must be prepared to provide full documentation demonstrating compliance with these regulatory requirements throughout the transportation lifecycle.
Deep Sea Freight Transportation

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Distribution SupportThe contract titled Military Packaging, Marking, and Distribution Support requires full adherence to military standards for the packaging, labeling, and identification of items being shipped and delivered. All materials must meet exacting specifications for container marking, item identification, and shipment integrity to ensure compatibility with defense logistics systems and operational readiness. Compliance with applicable regulations is mandatory throughout the distribution chain, from preparation at the origin to final delivery at the designated location. Performance is required at Robins Air Force Base, Georgia, with a submission deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services within the Department of Defense logistics framework. The award will support critical defense supply chain operations, demanding precision in documentation, labeling, and handling procedures to sustain military readiness and accountability. All contractors must be prepared to demonstrate strict compliance with federal and military standards during execution.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract involves the development and submission of hazard communication materials to ensure compliance with Globally Harmonized System standards for all hazardous components included in delivered items. This includes the creation of accurate, up-to-date GHS-compliant labels and Safety Data Sheets, which must meet federal and international regulatory requirements for the safe handling, storage, and transport of hazardous substances. The work is required to be performed in support of Department of Defense operations at Robins Air Force Base, Georgia, with all deliverables due by August 17, 2026. The solicitation is classified as a subcontract under NAICS code 541690, indicating it relates to other scientific and technical consulting services, and is issued by the Warner Robbins agency under the broader Department of Defense. All materials must be fully compliant, properly documented, and submitted by the deadline to fulfill contractual obligations without delay or deficiency.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Vaneaxial Fan SupplyThe contract seeks the procurement and delivery of 16 vaneaxial fans identified by NSN 4140015338424, with all units required to meet stringent military packaging, marking, and hazardous materials labeling standards to ensure safe handling and compliance with defense logistics protocols. The items must be delivered to Robins AFB, Georgia, with the ZIP code 31098-1887 designated as the place of performance, reflecting the operational need within a critical Department of Defense facility. The solicitation is classified as a subcontract and falls under NAICS code 333414, which corresponds to the manufacturing of ventilating and heating equipment. The opportunity was posted on August 5, 2026, with a firm response deadline of August 17, 2026, indicating a narrow window for qualified vendors to submit proposals. The contracting activity is managed by the Warner Robins office under the Department of Defense, underscoring the military-specific nature of the requirement and the expectation for strict adherence to federal supply chain regulations.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
PLASTIC STRIP, PRESS
Solicitation # SPE8E5-26-T-3824
The contract specifies the procurement of 6 roll units of plastic strip with pressure-sensitive adhesive coating, identified by NSN 9330-01-580-6367 and referenced under solicitation SPE8E5-26-T-3824, issued by the Defense Logistics Agency. Each roll equals 36 yards, with a total quantity of 216 yards required, to be delivered FOB origin within 167 days from the contract award, with no variance allowed in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA's Technical and Quality Requirements taking precedence over any other standard. The product must conform to approved specifications from 3M or Landsberg Kent H Co with specified part numbers. All packaging and palletization must adhere strictly to RP001 guidelines. The contract requires delivery by February 1, 2027, with an original required date of November 12, 2026, and transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20. Point of contact for inquiries is Khue Nguyen of the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3861
The contract pertains to the procurement of a nonmetallic special shaped section with NSN 9390-00-138-8915, requiring a quantity of 86 feet to be delivered within 125 days after order. The solicitation number is SPE8E5-26-T-3861, posted on August 5, 2026, with responses due by August 17, 2026, under a federal procurement through the Department of Defense, specifically managed by the Warner Robins office at Robins AFB, Georgia. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting any disclosure or transfer to foreign persons, including foreign nationals within the United States, and to foreign subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and approval via the DLA questionnaire may access this controlled information. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization and adhere to all DLA packaging and cybersecurity requirements as stipulated in RP001 and RD002.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339113
New
DIBBS
CARABINER
Solicitation # SPE8E6-26-T-4088
The contract specifies the procurement of 525 heavy-duty rescue carabiners conforming to ASTM F1956-99 standards, characterized as heat-treated alloy steel, plated D-shaped, with an internal size of 1.900 inches by 3.870 inches, a gate opening of 1.190 inches, and a linear capacity of 1.379 inches with a 1.270-inch diameter, featuring a locking mechanism. These items must meet all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede any referenced commercial standards. The product is assigned NSN 4240-01-192-6272 and is to be delivered under Contract SPE8E6-26-T-4088, with a unit price of $525.00 per EA, totaling $275,625. Delivery is required within 70 days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-129 labeling and RP001 DLA packaging requirements, using commercially packaged methods per ASTM D3951 unless the material is hazardous, in which case FED-STD-313 and TQ requirement IP025 apply. All packaging and palletization must adhere strictly to DLA guidelines. The delivery destination is DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of August 17, 2026, and an original delivery deadline of September 27, 2026. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by Christopher Barraro of the Department of Defense.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details