Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Trash Can Replacement Thomas E. Creek VA Medical Center

Active

36C25726Q0693Federal

Response Deadline07/28/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the replacement of trash cans at the Thomas E. Creek VA Medical Center in Amarillo, Texas, under the Statement of Work, with all work to be performed in accordance with specified requirements. The solicitation, issued by the Department of Veterans Affairs through the 257-NETWORK Contract Office 17 in San Antonio, Texas, is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, identified by NAICS code 326199. Interested parties must submit responses by the deadline of July 28, 2026, at 3:00 PM Eastern Time, with the solicitation posted on July 14, 2026. The primary point of contact for inquiries is Elizabeth Muela at elizabeth.muela@va.gov, with Taminie Woodrow available as a secondary contact at 210-694-6315. The contract is publicly accessible through the SAM.gov portal and is part of a broader effort to support veteran-owned businesses while maintaining facility standards at the VA medical center.

General Info

Replace trash cans at Amarillo VA medical center, set aside for service-disabled veteran-owned small businesses.

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)View Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

Amarillo, TX, 79106, USA

Set-Aside

SDVOSBC

Documents

(2)

36C25726Q0693+.docx

DOCX

36C25726Q0693+0001.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseSolicitation

PostedJul 14

Solicitation

Amendment 1Jul 21

Contract was updated

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 03:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Contacts2 people available

OfficeSan Antonio, TX, 78240, USA

Organization / Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

View Agency Profile

Office AddressSan Antonio, TX, 78240, USA

Contacts

Elizabeth Muela

contact@example.gov

Taminie Woodrow

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Amendment 0001 Provide Answers to Questions submitted

Similar Contracts

Same NAICS industry code

ESD/EMI Protective Packaging SupplyThe contract seeks the supply of ESD and EMI protective packaging materials certified to MIL-PRF-81705, specifically Type I barrier bags designed for the protection of sensitive RF components. These materials must meet stringent military performance standards to ensure electromagnetic interference shielding and static discharge prevention during handling, storage, and transit. The requirement is issued as a subcontract under the NAICS code 326199 and is managed by the Active Devices Division within the Department of Defense, with performance obligated at Hill AFB, Utah, ZIP code 84056-5734. The solicitation was posted on July 21, 2026, and responses are due by July 24, 2026, indicating a tight turnaround for vendors to submit proposals that comply with the technical and certification requirements. This procurement is critical for safeguarding high-value electronic components used in defense systems, where even minimal electrostatic or electromagnetic exposure can lead to operational failure. Vendors must provide documented evidence of MIL-PRF-81705 compliance for all submitted packaging, ensuring consistency with established military specifications. The absence of set-aside provisions suggests the opportunity is open to all qualified suppliers regardless of size or status, while the specific performance location implies a direct logistical connection to defense operations at Hill Air Force Base. Compliance with packaging specifications is non-negotiable, and failure to meet certification standards will result in disqualification.

ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

SPECTACLES, INDUSTRIThis contract requires the delivery of 10 pairs of industrial safety spectacles under NSN 4240-01-701-2897, with a purchase request number 7017543009, to be shipped FOB destination within 20 days of award. The supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements RP001. If the item is hazardous per FED-STD-313, it must be packaged to SPE8E6-26-T-3776 specifications; otherwise, commercial packaging compliant with ASTM D3951 is acceptable, but still subordinate to DLA technical standards. All items must be devoid of government identification if rejected, and demilitarization procedures apply to any Category I munitions-related components, though not relevant to this product. Delivery is to USS ROSS DDG 71 at FPO AE 09586, with transportation governed by DLAD Proc Notes C19 and C20. The contract identifies the unit of issue as each, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The solicitation was issued under SPE8E6-26-T-3776, with a required delivery date of July 22, 2026, and a response deadline of August 3, 2026. The contracting officer is John Lieb of the Defense Logistics Agency, and the item is classified under NAICS code 326199.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Poly Snow Deflector and Contoured Blade ComponentsThe contract seeks the supply of contoured polyethylene snow deflectors and associated polyethylene components engineered for durability under extreme winter conditions, with specific emphasis on UV resistance, impact tolerance, and optimal snow flow management for use on snowplow equipment. These components must meet rigorous performance standards to ensure reliable operation in Texas Department of Transportation’s winter maintenance operations, even in harsh and prolonged exposure environments. The materials are intended to enhance the efficiency and safety of snow removal systems by minimizing snow buildup and deflection on plow blades, reducing operational downtime and maintenance needs. The solicitation is classified as a subcontract under NAICS code 326199, with a short response window closing on July 24, 2026, and was posted on July 20, 2026. The Texas Department of Transportation is the procuring agency, and all components must be delivered to meet the operational demands of the state’s transportation infrastructure. While no set-aside provisions or specific geographic delivery requirements are detailed, the place of performance and contract execution are tied to Texas transportation maintenance needs, indicating a focus on locally applicable performance and logistical compatibility with existing plow systems.

Texas Department of Transportation

POSTED

DEADLINE

Five-Gallon Water Bottle Supply (New or Replacement Bottles)Princess Margaret Hospital, acting under the Government of Jamaica, is seeking a subcontractor to supply new, food-grade, reusable five-gallon bottles made from polycarbonate or PET to replace damaged or lost containers. The bottles must meet strict food-grade standards to ensure safety and compliance with health regulations for water storage and distribution. The contract focuses exclusively on providing replacement units rather than initial procurement, indicating an ongoing need to maintain inventory levels and operational continuity. The NAICS code 326199 classifies this as an establishment involved in other rubber and plastics product manufacturing, underscoring the technical specifications required for material quality and durability. The solicitation is posted on the Government of Jamaica’s e-procurement platform, and while no set-aside provisions or specific geographic performance details are outlined, the obligation to deliver containers for use within Jamaica is implied by the agency’s identity and jurisdiction. The contract does not specify delivery timelines, volume quantities, or pricing structures, suggesting that these elements will be negotiated upon award.

Princess Margaret Hospital

POSTED

DEADLINE

MIL-STD-2073-1E Compliant Packaging and Preservation Materials SupplyThe contract seeks specialized packaging materials, including Wrapping Material JA and Container D3, engineered to meet the stringent preservation standards of MIL-STD-2073-1E for safeguarding critical military components during storage and transit. These materials must ensure long-term protection against environmental degradation, corrosion, and physical damage, aligning with Department of Defense requirements for readiness and operational reliability. The materials are intended for use in the defense supply chain and must be manufactured to exact specifications to maintain the integrity of sensitive equipment. This subcontract opportunity is issued by the ASC COMMODITIES DIVISION under the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation opens on July 20, 2026, and responses must be submitted by July 28, 2026. The NAICS code 326199 categorizes the work under other plastic product manufacturing, indicating the focus on custom plastic-based packaging solutions. Bidders must demonstrate proven compliance with military packaging standards and the capacity to deliver consistent, high-quality materials on schedule to support defense logistics and sustainment operations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of 250 mL Polyethylene Laboratory Wash BottlesThe contract calls for the manufacture and delivery of 250 mL polyethylene laboratory wash bottles to support the Department of Defense Medical Supply Chain, with strict compliance required for federal packaging, labeling, and hazardous materials handling regulations. The bottles must meet all applicable standards to ensure safe use in medical and laboratory environments, with performance and delivery obligations tied to the specified location in San Diego, California, ZIP 92135-5000. This is a subcontract under NAICS code 326199, with a response deadline of July 27, 2026, and the solicitation was posted on July 20, 2026, indicating a limited window for potential vendors to submit proposals. All activities must align with the medical supply chain’s operational and regulatory expectations under the DOD framework.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of 4 oz Screw Cap Cylindrical BottlesThe contract calls for the supply and delivery of 4 oz cylindrical plastic bottles with screw caps, manufactured and labeled to meet strict military packaging and labeling standards. Compliance with ASTM D3951 for packaging, FED-STD-313 for packaging and marking, MIL-STD-129 for labeling of military property, and DLA Medical Marking Standard No. 1 is mandatory, ensuring these containers meet the rigorous requirements for use within the Department of Defense medical supply chain. The bottles must be properly identified, marked, and packaged to enable seamless integration into existing military logistics systems without modification or rework. The procurement is designated as a subcontract under NAICS code 326199, with a response deadline of July 27, 2026, and is associated with the Medical Supply Chain MD Surg FSF under the Department of Defense. Performance is required at Pearl Harbor, HI 96860-5033, indicating the end-use location is a key military medical facility. The solicitation is publicly accessible through the DIBBS system, and while no specific set-aside type is listed, all bidders must be prepared to demonstrate full adherence to the technical and regulatory specifications outlined in the referenced standards to qualify for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Insulation Blanket Manufacturing and SupplyThe contract seeks the manufacture and supply of 100 feet of insulation blanket, Part Number AE102-8, with a tolerance of ±10%, designed to meet stringent military and quality standards for use in critical applications. The item must comply with all technical and performance specifications required for defense-related environments, ensuring reliability under extreme conditions. The procurement is issued as a subcontract under NAICS code 326199, and performance is to be completed at the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, providing vendors a limited window to submit proposals. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, indicating the high-priority nature of the requirement and the expectation for full compliance with federal and defense acquisition regulations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Plastic and Polymer Component FabricationThe contract encompasses the supply of precision injection-molded polymer components including ratchets, latches, and padding substrates designed for medical-grade applications requiring exceptional durability, exacting tolerances, and biocompatible material properties. These components are intended for use in surgical and medical devices, demanding rigorous quality control and compliance with high-performance standards to ensure reliability in critical healthcare environments. Manufacturing must adhere to stringent specifications for material composition, dimensional accuracy, and surface finish to meet the functional and safety requirements of the end-use applications. The solicitation is issued under the NAICS code 326199 for other plastic product manufacturing and is structured as a subcontract opportunity through the Department of Defense’s Medical Supply Chain division. The place of performance is listed as Fort Campbell with a zip code of 42223-1498, indicating delivery and logistical requirements tied to this location. The opportunity was posted on July 20, 2026, with a firm response deadline of July 27, 2026, allowing suppliers seven days to submit proposals. The contract is part of a broader DoD initiative to secure advanced polymer components for medical equipment, emphasizing rapid procurement, supply chain resilience, and support for military medical operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Waste Container Supply

Department of Health and Human Services - Dhhs

POSTED

DEADLINE

Tarps and Heavy-Duty Coverings SupplyThe contract entails the supply of military-grade tarpaulins identified by NSN 2540016822441, specifically engineered to meet stringent federal standards for packaging, durability, and labeling to support secure transport and storage operations. These heavy-duty coverings are critical for protecting sensitive military equipment and materials under demanding environmental conditions, ensuring longevity and operational readiness across all branches of the Department of Defense. The items must comply with all applicable regulatory and technical specifications to guarantee interoperability and reliability in deployment scenarios. This is a subcontract under the Defense Logistics Agency, classified under NAICS code 326199 for other rubber product manufacturing, and was posted on July 20, 2026. While no specific solicitation number or set-aside details are provided, the award is tied to the contract reference SPE7L226V0968 and will support DLA’s broader logistics and supply chain objectives. Performance location and point of contact information are not specified, but the tarpaulins are intended for use across military installations and operational areas as required by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Same awarding agency

Z2DA--519-20-200 VABS Replace Boiler Plant Solicitation 36C25726B0006The solicitation for the Z2DA--519-20-200 VABS Replace Boiler Plant, identified by solicitation number 36C25726B0006, is a Firm-Fixed-Price contract issued by the Department of Veterans Affairs through the Network Contracting Office 17 in San Antonio, Texas, for the demolition and replacement of the boiler plant at the West Texas VAMC in Big Spring, Texas. The work encompasses complete removal of existing systems and installation of new packaged fire-tube boilers, piping, fuel trains, breechings, feedwater systems, and associated mechanical and electrical upgrades, all while maintaining continuous facility operations via temporary boilers during transition. Performance must comply with VA Master Specifications, VHA Directive 1810, OSHA standards, ICC codes, and NSF requirements for potable water, with all work subject to rigorous inspection and acceptance at the site, including visual tests, thermographic surveys, functional performance testing, and third-party special inspections. The contract is a Service-Disabled Veteran-Owned Small Business Set Aside, and offerors must be certified SDVOSBs in good standing with SAM.gov and possess an Experience Modification Rate of 1.0 or lower, with no more than three serious OSHA or EPA violations in the past three years. Offerors are required to submit a complete electronic bid package in PDF format via email to Horacio.Fernandez@va.gov by June 16, 2026, at 10:00 a.m. CST, with all documents organized and conforming to specified forms including SF 1442, SF 30, and a bid bond of at least 20%. The award will be made on a Lowest Price Technically Acceptable basis, with technical acceptability evaluated through strict conformity to solicitation requirements, compliance with subcontracting limitations—capping payments to non-certified subcontractors at 85% under general construction or 75% under special trade construction—and adherence to safety, insurance, and certification mandates. Contractors must carry minimum workers’ compensation, general liability, and automobile liability insurance, submit site-specific safety plans, and comply with VA-specific clauses including personnel vetting, IT accessibility, and security prohibitions. All updates, amendments, and clarifications must be monitored by offerors exclusively on SAM.gov, with failure to do so rendering proposals non-responsive without recourse. Invoices must be submitted exclusively via the VA’s Tungsten Network platform

Power and Communication Line and Related Structures Construction

POSTED

about 22 hours ago

DEADLINE

J066--Luminex 200 Service Maintenance Agreement

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

DA10--FY26 - STX NFS Computrition NCM Select Software license

Software Publishers

POSTED

about 22 hours ago

DEADLINE

Audiology Booth RemovalThe Department of Veterans Affairs, through its Network Contracting Office 17 in San Antonio, Texas, is seeking a Service-Disabled Veteran-Owned Small Business (SDVOSB) to perform the deinstallation, removal, and disposal of an audio booth located at Fort Bliss, Texas, under solicitation number 36C25726Q0753. This is a total set-aside for certified SDVOSBs, requiring offerors to be registered and certified in the SBA’s database, comply with VAAR subpart 819.70 and SBA regulations under 13 CFR parts 121, 125, and 128, and provide a formal certification of compliance with limitations on subcontracting. The contract is a one-time service with a 30-day period of performance from award notification, requiring flat rate pricing per two line items: sound room removal and disposal of materials to metal recyclers. Contractors must demonstrate technical capability through a three-page capability statement detailing their approach to fulfilling the Statement of Work, provide references of three similar projects from the last three years, and list key personnel including two fully qualified Field Service Engineers with OEM-certified training, one of whom must serve as backup. All personnel are subject to verification and potential rejection by the Contracting Officer. Compliance with the Privacy Act of 1974 and HIPAA is mandatory due to potential handling of sensitive health information, and contractors must establish administrative, technical, and physical safeguards to protect government data without removing materials from facilities without written permission. Invoices must be submitted electronically post-performance per VAAR Clause 852.232-72 and paid via Electronic Funds Transfer through SAM. The solicitation requires submission of a signed SF-1449, all amendments, and the standalone 852.219-75 subcontracting certification by the July 22, 2026 deadline at 1:00 PM CDT via email. Offers must remain firm for 90 days, and evaluation will follow a competitive best value process using Comparative Analysis, considering technical capability, past performance, and price. Contractors must be established businesses with full-time staff and maintain compliance with FAR clauses on whistleblower rights, prohibition of internal confidentiality agreements, personal identity verification, SAM maintenance, and prohibition on contracting with inverted domestic corporations. Service Contract Wage Determination 2015-5229 applies, and no certification and accreditation requirements are in

Site Preparation Contractors

POSTED

DEADLINE

in about 8 hours

6515--Surgical LightsThe Department of Veterans Affairs, through Network Contracting Office 17 in San Antonio, Texas, is conducting market research for the acquisition of Skytron Surgical Lights and associated equipment for the Olin E. Teague Veterans Medical Center in Temple, Texas. This is a sources sought notice, explicitly not a request for competitive quotes, intended to evaluate vendor capabilities to determine whether the procurement will proceed as a sole source or competitive acquisition. The requirement includes specific ceiling-mounted surgical lighting systems in single, double, and triple-head configurations with adjustable intensity, color temperature, and pattern size, engineered to handle weight and torque with seismic and structural compliance per local codes. All equipment surfaces must resist hospital-grade disinfectants and meet NFPA 70/99 electrical safety standards. The scope includes delivery and installation of eight unique light configurations totaling 20 units, along with comprehensive services for installation, inspection, warranty, de-installation, mobilization, and disposal for each room. Installation must occur under Level 4 ICRA standards outlined in VHA ICRA-1.2, with minimal disruption to hospital operations and full compliance with EPA, state environmental regulations, OSHA, and VHA directives including 2004-012. Contractors must submit proof of authorization as an OEM dealer, distributor, or reseller, as gray market items are strictly prohibited. All vendors must be registered in SAM, provide their NAICS code 339113, indicate their business size and socioeconomic status such as SDVOSB, VOSB, 8A, HUBZone, or WOSB, and disclose the U.S. city and state where the equipment is manufactured. A safety plan compliant with OSHA requirements must be submitted for VA approval, and all personnel must hold OSHA 10- or 30-hour construction training. Responses must be submitted via email to Michelle Cunningham at michelle.cunningham@va.gov by April 16, 2026, at 10:00 AM Central Time, and include business identification, point of contact, SAM UID, GSA/FSS contract number if applicable, and OEM authorization documentation.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

6515--Ophthalmic A/B-Scanâ€“Pachymeter Ultrasound *BRAND NAME OR EQUAL*The Department of Veterans Affairs, through the 257-NETWORK Contract Office 17 in San Antonio, Texas, is seeking information from potential suppliers for an ophthalmic A/B-scan pachymeter ultrasound device, specified as brand name or equal. The solicitation, identified by number 36C25726Q0790, was posted on July 20, 2026, with responses due by July 24, 2026. The equipment will be used at a facility in El Paso, Texas, with a ZIP code of 79930, and falls under NAICS code 339112 for medical equipment manufacturing. This is a sources-sought action, indicating the government is gathering market feedback rather than issuing a formal request for proposal. The primary point of contact is Contracting Specialist Matt Lee, reachable via email at matthew.lee5@va.gov or by phone at 210-393-9281. The solicitation does not specify a set-aside type, meaning it is open to all eligible businesses without restriction based on size or ownership category.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

6520--INTRAORAL SCANNERThe Department of Veterans Affairs, through Network Contracting Office 17 in San Antonio, Texas, is conducting market research for the procurement of intraoral scanning systems and associated equipment to support the activation of the VA North Texas Health Care System. The requirement includes the supply and delivery of 14 CEREC PRIMESCAN AC TP STEEL(DI) units, three CEREC SW 5.3 FULL VERSION software licenses, two Primemill US systems, three Speedfire Ovens, two Suction Units (Dry Milling) 120 VAC, two Hand Cleaning Hose sets, one PrimePrint Solution, one InLab 4 PC-US system with keyboard and mouse, one InLab System PC Monitor, one PrimePrint Nitro generator, and one on-site training session. All items are identified by specific part numbers and are intended for use at the Dallas VA Hospital located at 4500 South Lancaster Road, Dallas, TX 75216-7191. This effort is not a solicitation for contract award but a sources-sought notice aimed at gathering industry feedback to inform future acquisition planning, potential set-asides, and vendor capabilities. Responses must include business name, address, point of contact, SAM Unique Entity ID and registration status with expiration date, NAICS code 339114, business size classification, socioeconomic status including SDVOSB, VOSB, 8(a), HUBZone, or WOSB status, and any existing GSA or VA FSS contract numbers. Responses are to be submitted via email to both the Contract Specialist and Contracting Officer by June 29, 2026, at 11:00 AM CT, with the exact subject line “36C25726Q0681, Sources Sought Notice.” The notice explicitly states that responses do not constitute offers and the Department of Veterans Affairs will not enter into any binding contract based on this notice. All respondents bear full responsibility for costs associated with preparing and submitting their input.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

in about 6 hours

Testing & Inspecting, Preventative Maintenance (PM), Corrective Repairs, Emergency Repairs, and Service Calls for facility the VA Cogeneration and Boiler Chiller PlantThe Department of Veterans Affairs through the 257-NETWORK Contract Office 17 is seeking sources for comprehensive maintenance and repair services at the Cogeneration and Boiler Chiller Plant in Dallas, Texas. The contract requires vendors to provide testing, inspecting, preventative maintenance, corrective repairs, emergency repairs, and service calls for critical plant systems. This procurement is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses, with the NAICS code 238220 indicating the industrial classification for plumbing, heating, and air-conditioning contractors. The solicitation, identified by number 36C25727Q0003, was posted on July 20, 2026, with responses due by August 4, 2026, at 3:00 p.m. Eastern Time. All work must be performed at the facility located in Dallas with a zip code of 75216, while the contracting office is based in San Antonio, Texas. Primary point of contact for questions and submissions is Mr. Shawn R. Reinhart, reachable via email at shawn.reinhart@va.gov.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

6640--Molecular Testing PlatformThe solicitation, numbered 36C25727Q0004, is a combined synopsis and request for quotation issued under the Revolutionary FAR Overhaul for commercial products and services, seeking quotes for a Molecular Testing Platform. It is unrestricted and requires vendors to be registered in SAM with NAICS code 334516; Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses must also be certified in SBA.gov to qualify. All submissions must be sent via email to Jose Campa at jose.campa@va.gov by 10:00 AM/CST on August 5, 2026, with no hard copy or fax submissions accepted. Late responses may be considered only if they benefit the Government, and quoted materials must not exceed 25 megabytes in total file size. The place of performance is Amarillo, Texas, and only submissions received by the stated deadline will be evaluated. Questions or inquiries must be submitted in writing no later than July 24, 2026, at 3:00 PM/CST. The contracting officer, Jose Campa of the Department of Veterans Affairs, Network Contracting Office 17 in San Antonio, Texas, is the sole point of contact for all communication related to this solicitation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

The VA North Texas Health Care system requires community based Outpatient clinic (CBOC))The VA North Texas Health Care System is seeking a Service-Disabled Veteran-Owned Small Business to provide comprehensive outpatient healthcare services at a community-based outpatient clinic (CBOC) in Sherman, Texas, serving Veterans primarily in Grayson County and surrounding areas. The contract is a fixed-price indefinite-delivery indefinite-quantity (IDIQ) vehicle with a one-year base period beginning December 1, 2026, and nine option periods extending through November 30, 2036, with a guaranteed minimum value of $581,175 for the entire contract duration. Services must include primary care teamlet staffing, medical director oversight, and adherence to strict clinical protocols outlined in attachments such as the Quality Assurance Surveillance Plan, Radiology and CBOC Service Agreement, Pathology and Laboratory Manual, Suicide Prevention Policy, and Telehealth Operations Manual. All clinical staff must be licensed in Texas, meet VA qualification standards, and hold prescriptive authority if serving as a primary care provider. Performance standards mandate new primary care appointments be completed within 20 calendar days of the reference date, and specimen handling must comply with 49 CFR regulations, including proper labeling, temperature control, and delivery to the Dallas VA Medical Center. The solicitation is set aside exclusively for SDVOSBs under NAICS code 621498 and requires full compliance with FAR and VAAR clauses covering business ethics, whistleblower rights, conflict of interest, subcontracting limitations, and System for Award Management (SAM) maintenance, with specific deviations effective November 2025 and October 2025 applied to several clauses. Contractors must also comply with VA Directive 0710 for personnel security, obtain $1 million per person and $3 million aggregate medical liability insurance, conduct background investigations for all staff designated as Tier 1/Low Risk, and ensure all employees meet immigration compliance requirements under the Immigration and Nationality Act. Pricing must be submitted as an all-inclusive Per Member Per Month (PMPM) rate that includes costs for both assigned and unassigned patients, with startup and build-out expenses embedded in the single line item, and no separate billing permitted for additional services. Proposals are evaluated based on Technical Capability (25%), Past Performance (25%), and Price (50%), with award determined by best overall value using the Comparative Analysis Method under VAAR 873.116(b). All submissions must be sent via email to the Contracting Officer, Carlos Jaquez,

All Other Outpatient Care Centers

POSTED

DEADLINE

in about 1 month

N041--36C257-26-AP-1897 | FY26 CON | 671A4-24-002 Replace BLDG 96 HVAC UnitsThe Kerrville VA Medical Center is preparing to solicit bids for the removal, replacement, and installation of air handlers in Building 96, with an invitation for bids expected to be posted on or about May 1, 2026. This project falls under NAICS code 238220 and has an estimated value between $2 million and $5 million, with the entire contract reserved exclusively for Service-Disabled Veteran-Owned Small Businesses. The work will be performed at the medical center located at 3600 Memorial Blvd., Kerrville, Texas, 78028, and the contracting office is the 257-NETWORK Contract Office 17 based in San Antonio, Texas. Jose Portalatin, Contract Specialist, serves as the primary point of contact and can be reached via email at jose.portalatinrivera@va.gov or by phone at 915-564-6100. The formal solicitation, identified by the number 36C25726B0002, will be issued under the Presolicitation Notice and has a proposed response deadline of July 31, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Z2DA--Replace Water Heater and Boilers Out BuildingsThe Amarillo VA Healthcare System is seeking a Service-Disabled Veteran-Owned Small Business to replace two 40-gallon water heaters with a single 100-gallon unit in Building 35 and install three new boilers in Building 46, located at 6010 Amarillo Blvd West, Amarillo, Texas. The contract will be awarded as a firm-fixed-price construction project under a Request for Quotes, following FAR Parts 13 and 36, with a total project value between $100,000 and $250,000. All work must be completed within 120 calendar days after the Notice to Proceed, and only approved brand-name or equal products may be used, with detailed equivalence documentation required for alternative products. The North American Industry Classification System code is 238220, and the small business size standard is $19.0 million in annual receipts. All offerors must be certified by the U.S. Small Business Administration’s VetCert Program as a Service-Disabled Veteran-Owned Small Business and must be visibly listed in the SBA’s Dynamic Small Business Search database prior to submitting a quote; failure to meet this requirement will render a quote non-responsive. The solicitation is tentatively scheduled for release between July 24 and August 14, 2026, with an anticipated award date of September 11, 2026. The Contracting Officer, Ms. Makarim Abdul-Jabbar, and Contracting Officer’s Representative, Serven Bebanco, are the primary points of contact for the project, both reachable via email through the Department of Veterans Affairs. The place of performance is in Potter County, Texas, and the Network Contracting Office 17 will manage the procurement process.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE