Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLASTIC SHEET

Active
SPE8E9-26-T-3191Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a plastic sheet with exact dimensions of 12 inches long, 12 inches wide, and 0.625 inches thick, classified under NSN 9330-01-253-3478 and requiring compliance with the latest issue of QPL 23653. The material must adhere to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the product or its direct contact, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The procurement is fully competitive under a military or federal specification. The solicitation number is SPE8E9-26-T-3191, with a response deadline of July 31, 2026, and a delivery schedule of 156 days after award. A total quantity of 2,252 units is requested under purchase request 7017423263, and the place of performance is New Cumberland, Pennsylvania, 17070-5002, with Matthew Kruc listed as the primary point of contact.

General Info

Procure 2,252 plastic sheets 12x12x0.625 inches, NSN 9330-01-253-3478, QPL 23653 compliant, no mercury except approved uses.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

325211 - Plastics Material and Resin ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-T-3191 for DLA Troop Support Construction & Equipment MRO

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC SHEET
PLASTIC SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
12 IN LONG, 12 IN WIDE, .625 IN THICK<(>,<)>
MATERIAL, PLASTIC
QPL 23653 LATEST ISSUE APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 9330-01-253-3478 Quantity: 2,252 SH Purchase Request: 7017423263QTY: 2252 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325211
New
SLED
Thermoplastic Resin (TPR) Compound Manufacturing for Shoe Sole PelletsThe contract requires the manufacture of thermoplastic rubber pellets with precise material specifications tailored for use in shoe soles produced for the Texas Department of Criminal Justice. The material must meet stringent performance and durability criteria to ensure suitability for institutional footwear, with compliance to industry standards for safety, wear resistance, and chemical stability. Production must be carried out in accordance with established quality control protocols to guarantee batch consistency and adherence to the required physical and thermal properties of the thermoplastic rubber compound. The contract is classified as a subcontract under NAICS code 325211, pertaining to plastic resin manufacturing, and is issued by the Comptroller of Public Accounts for the state of Texas. The solicitation was posted on July 20, 2026, with a response deadline of August 11, 2026, at 7:30 PM Central Time. While the specific location of performance is not defined, delivery is expected to support state-mandated footwear production requirements. All submissions must demonstrate capability in consistent high-volume manufacturing and must comply with applicable state procurement regulations.
Comptroller of Public Accounts

POSTED

about 21 hours ago

DEADLINE

in 21 days
View Details
NAICS: 325211
New
DIBBS
PLASTIC STRIPPlastic strip, NSN 9330-01-168-2090, is being procured in a quantity of 413 units under solicitation SPE8E5-26-T-3589, issued by the Defense Logistics Agency through Depot Oklahoma for delivery to Tinker AFB, Oklahoma. The contract is a Total Small Business Set-Aside under NAICS code 325211 with a delivery requirement of 245 days from award, under FOB Origin terms. The item is classified as a commercial item and must be free of asbestos as defined by FED-STD-313. All packaging, marking, and labeling must comply with MIL-STD-129, including mandatory 2D Data Matrix barcoding, while palletization adheres to RP001 DLA Packaging Requirements. Non-hazardous materials follow ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced via "R" or "I" numbers. Hazardous materials, if any, must meet TQ IP025 and include compliant hazard warning labels submitted prior to award. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, labor, supply chain, and administrative compliance. Key cybersecurity requirements include safeguarding covered defense information under 252.204-7012 and adherence to NIST SP 800-171 via 252.240-7997. Prohibitions apply to covered defense telecommunications equipment from certain Chinese entities and the use of hexavalent chromium. All payment requests and receiving reports must be submitted electronically through WAWF, and contractors must be registered in SAM with a valid UEI and CAGE code. Small business offerors must represent their size and socioeconomic status accurately, and joint venture participants must disclose UEIs. The contract includes clauses on employment eligibility verification, combating human trafficking, equal opportunity for workers with disabilities, and accelerated payments to small business subcontractors. Inspection and acceptance occur at the destination by government personnel, with non-conforming supplies subject to removal and disposal per RQ011. No contract value is explicitly stated, and pricing details remain incomplete, though historical procurement data for the same item is referenced. The solicitation closes on July 23, 2026, with responses only accepted via DIBBS.
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 325211
New
Federal
93--PLASTIC SHEETThe contract solicits the procurement of 2,252 units of plastic sheeting identified by NSN 9330012533478, classified as a qualified products list item, requiring compliance with specific military specifications. Quotes must be submitted electronically by the deadline of July 31, 2026, and are to be delivered to DLA Distribution at location W1A8, with an acquisition date of 156 days after order. The solicitation, numbered SPE8E9926T3191, was posted on July 20, 2026, and is open to all responsible sources without set-aside restrictions. It falls under NAICS code 325211 for plastic profile shape manufacturing, managed by DLA Troop Support under the Department of Defense. All pertinent documents, including military standards and the RFQ itself, are accessible only through the electronic portal, with no hard copies available. Questions must be directed via email to the designated point of contact, and the solicitation details can be retrieved using the provided SAM.gov link or the DIBBS website by entering the solicitation number.
DLA Troop Support

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 325211
New
DIBBS
Supply of Antifreeze (Engine Coolant) for Military Vehicle MaintenanceThe contract entails the procurement and delivery of one 208L drum of antifreeze, identified by NSN 6850014716521, which must meet military specifications for use in vehicle maintenance operations at Fort Irwin, California. The substance is categorized as engine coolant and is essential for ensuring proper thermal regulation of military vehicles under extreme operational conditions. The contract is structured as a subcontract under the NAICS code 325211, which corresponds to the manufacturing of other chemical products, indicating the supplier is likely a specialized chemical producer meeting defense-grade standards. The award is managed by the Defense Logistics Agency on behalf of the Department of Defense, with the procurement linked to the contract award SPE4AX16D9008 and delivery identifier SPE4A626FCTYL. The posting date of July 17, 2026, suggests this is a future-directed action, likely part of a scheduled maintenance or inventory replenishment cycle. No specific point of contact or detailed location information is provided, but performance is mandated at Fort Irwin, CA, implying logistical coordination will be required to support the facility’s operational readiness.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325211
New
DIBBS
Virgin Nylon 6/6 Material SupplyThe contract is for the supply of virgin nylon 6/6 resin in either pellet or preform form, with strict requirements that the material must be certified free of any recycled content and fully compliant with the L-P-410 military specification. The material is intended for use in defense-related applications where purity and performance under stringent operational conditions are critical. The contract is classified as a subcontract and is associated with the NAICS code 325211, which corresponds to plastics material and resin manufacturing. The awarding agency is the Defense Logistics Agency under the Department of Defense, indicating the supply is part of a broader defense logistics effort to ensure consistent, high-quality material sourcing for military systems. The posting date of July 17, 2026, suggests this is a forward-looking procurement intended to secure future supply chains, though no specific place of performance or point of contact is provided in the available data.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 325211
New
SLED
Construction Materials Supply – HDPE Pipe & FittingsThe contract involves the supply of high-density polyethylene (HDPE) pipe, fusion fittings, and meter components specifically for service line replacement projects, with all materials required to comply with PPI or ASTM F714 standards and BABAA requirements to ensure quality and regulatory adherence. The materials must be suitable for potable water applications and delivered in accordance with strict industry specifications to support infrastructure upgrades. All submissions are subject to verification for compliance before acceptance under the terms of this subcontract. The opportunity is posted by the City of Hawkinsville in Georgia with a response deadline of August 20, 2026, and is classified under NAICS code 325211 which pertains to plastic pipe and pipe fitting manufacturing. The solicitation is open for subcontractors to bid on the provision of materials, and while no specific set-aside designation is listed, bidders must be prepared to meet all technical, delivery, and certification criteria outlined in the regulatory and performance requirements. Further details and submission instructions are accessible via the provided state government portal link.
City of Hawkinsville

POSTED

4 days ago

DEADLINE

in 30 days
View Details
NAICS: 325211
New
DIBBS
Supply of Critical Raw Materials and ComponentsThe contract solicits the supply of high-temperature resistant polymers, reinforced liners, and metal fittings specifically for use in military hose and duct production, requiring all materials to meet stringent traceability and quality standards set by the Defense Logistics Agency. Suppliers must demonstrate full compliance with DLA quality protocols, ensuring that each component can be tracked through its entire lifecycle and meets the demanding performance criteria necessary for defense applications. The materials are critical to the integrity and operational reliability of military fluid handling systems under extreme conditions. The opportunity is structured as a subcontract under NAICS code 325211, issued by the Department of Defense’s Fluid Handling Division with a place of performance in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026. All potential vendors must adhere to the detailed procurement requirements outlined in the solicitation, accessible via the provided DIBBS link, and be prepared to provide full documentation verifying material origin, testing procedures, and compliance certifications as part of the submission.
FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 325211
New
DIBBS
Orange Translucent Polycarbonate Material SupplyThe contract entails the supply of translucent orange polycarbonate resin or sheet stock specifically engineered for use in surgical eye shields, with stringent requirements for optical clarity, high impact resistance, and consistent color properties to ensure visual protection and functional reliability in medical environments. The material must meet exacting standards to support sterile, precision-based surgical procedures where barrier integrity and visibility are critical. Performance specifications demand materials that maintain structural resilience under stress while delivering uniform light transmission characteristics through a distinct translucent orange hue. The solicitation is issued under the NAICS code 325211 for plastic material and resin manufacturing, and the procurement is classified as a subcontract through the Department of Defense’s Medical Supply Chain division. The place of performance is designated as Niantic, Connecticut, with a zip code of 06357-2512, indicating where delivery and compliance verification will occur. The opportunity was posted on July 16, 2026, and responses are due by July 22, 2026, offering a six-day window for qualified suppliers to submit proposals. The procurement is managed under the agency designation MEDICAL SUPPLY CHAIN MD SURG FSF and is accessible via the DIBBS platform for vendor participation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 325211
New
DIBBS
Supply of Military-Grade Silicone Compound (NSN 6850008807616)The contract entails the procurement and delivery of nine units of a military-grade silicone compound identified by NSN 6850008807616, intended for use aboard a naval vessel within the Armed Forces Europe region. The supplier must ensure full compliance with DFARS regulations, including the submission of invoices that meet defense contracting requirements, and must provide traceable shipping documentation to maintain accountability throughout the logistics chain. Each unit must be properly marked according to military standards to ensure correct identification, handling, and integration into naval systems. The work is executed under a subcontract tied to the Defense Logistics Agency under the Department of Defense, with the NAICS code 325211 indicating classification in the chemical manufacturing sector. Although the exact delivery location and point of contact are unspecified, performance is directed toward a military operational environment in Europe, and all activities must adhere to strict defense procurement protocols.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325211
New
DIBBS
Sustainable & Bio-Based Material SupplyThe contract entails the supply of USDA BioPreferred® certified bioplastics and recycled polymers specifically for use in the manufacturing of environmentally compliant cases, ensuring alignment with federal sustainability standards. These materials are intended to support the production of packaging and containment solutions that reduce reliance on conventional petroleum-based plastics and promote the use of renewable, certified bio-based and recycled content. The work falls under NAICS code 325211, which pertains to plastic product manufacturing, and is executed as a subcontract under the broader procurement framework of the Defense Logistics Agency, a component of the Department of Defense. Delivery of these materials must meet strict compliance requirements tied to USDA certification and performance benchmarks for recycled content, with the place of performance aligned with defense supply chain needs. Although specific delivery locations and point of contact details are not provided, the contract is active under the solicitation tracking reference SPE8EN26D0001 and delivery identifier SPE8EN26F3219, indicating its integration into a larger logistics and procurement initiative. The agreement underscores the Department of Defense’s commitment to incorporating sustainable materials into its operational infrastructure, reinforcing environmental stewardship across defense manufacturing channels.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325211
New
DIBBS
Silicone Compound Supply (Sealant Material)The contract pertains to the supply of twelve tubes of THREEBOND 1217F-GM silicone compound, identified by NSN 6850015494631, to be delivered to a USAR center. The material is classified as a sealant and is intended for use without any installation or service requirements from the supplier. The procurement falls under NAICS code 325211, indicating it relates to the manufacturing of other chemical products. The contract is structured as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense, and was posted on July 16, 2026. Delivery is the sole obligation, with no further support or technical assistance expected. The award reference details point to a specific contract and delivery identification through the DIBBS system, though no specific location for performance or point of contact is provided in the data.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325211
New
DIBBS
Rapid Pregnancy Test Kit SupplyThe contract seeks the supply of rapid qualitative HCG test kits designed for early pregnancy detection in both serum and urine samples, with each package containing 50 individual tests and a sensitivity threshold of 25 MIU/mL to ensure reliable early results. These test kits are intended for use within military medical supply channels and must meet specified performance standards for accuracy and consistency in clinical environments. The solicitation is classified as a subcontract under NAICS code 325211, which pertains to pharmaceutical and medicine manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The place of performance is designated as Fort Stewart, Georgia, with a zip code of 31314-5185, indicating the primary logistics and distribution hub for delivery. The opportunity was posted on July 16, 2026, and responses are due by July 22, 2026, providing a narrow six-day window for potential suppliers to submit proposals. While no set-aside provisions or organizational type restrictions are specified, the requisition is part of a broader defense medical logistics initiative, requiring compliance with federal procurement standards and likely inclusion of quality assurance, packaging, labeling, and shipment requirements tied to military specifications. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain full technical and administrative instructions governing submission requirements, certification, and evaluation criteria.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

5 days ago

DEADLINE

in about 23 hours
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326220
New
DIBBS
Fibrous Rope Supply (2750 FT/Coil) – CLIN 0001 & 0002The contract requires the supply of fibrous rope in 2750-foot coils, fully compliant with military packaging, labeling, and traceability standards for delivery to the Defense Logistics Agency. A total of 43 coils are to be delivered, split between two contract line item numbers: 8 coils under CLIN 0001 and 35 coils under CLIN 0002. All items must meet stringent military specifications to ensure suitability for defense operations, with strict adherence to documentation and identification requirements for full traceability throughout the supply chain. The solicitation was posted on July 20, 2026, with proposals due by July 27, 2026, and is classified as a subcontract under NAICS code 326220, which pertains to other plastics product manufacturing. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment MRO SVC I office, with performance and delivery requirements centered on DLA logistics operations.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details