Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLASTIC SHEET

Active
SPE8E5-26-T-3839Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a plastic sheet with part number AFDE588 and NSN 9330-01-699-2674, requiring a quantity of two units. Deliveries must be made FOB origin with a delivery timeframe of 167 days, and no variance in quantity is permitted. Inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with specific preservation methods including drying, and marking must comply with MIL-STD-129 without special marking codes. The product shall be palletized per DLA packaging requirements, and the final delivery address is the DLA Distribution facility at DDSP New Cumberland in Pennsylvania. The material is subject to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and compliance with these is mandatory. The contract identifier is SPE8E5-26-T-3839, issued under a federal solicitation with a NAICS code of 325211. The original required delivery date was December 22, 2026, with a needed ship date of February 1, 2027. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The unit price is $2.00 per unit, resulting in a total price of $4.00. Transportation and freight shipping instructions reference DLA procedures C19 and C20. The point of contact for the contract is Khue Nguyen, reachable via phone or email through the Department of Defense. All unit of issue and purchase conversions must align with the official DLA Excel reference document provided.

General Info

Procure two plastic sheets, part AFDE588, FOB origin, deliver to DLA New Cumberland by Feb 1, 2027, at $2.00 each.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

325211 - Plastics Material and Resin ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3839.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Khue Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC SHEET
PLASTIC SHEET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
EMCO INDUSTRIAL PLASTICS, LLC 0CK79 P/N AFDE588 2X24X24
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758048 0001 EA 2.000
NSN/MATERIAL:9330016992674
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE8E5-26-T-3839
SECTION B
PR: 7017758048 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:12/22/2026
SPE8E5-26-T-3839 NSN/Part Number: 9330-01-699-2674 Quantity: 2 EA Purchase Request: 7017758048QTY: 2 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325211
New
DIBBS
ROLLER, MATERIAL HANDLI
Solicitation # SPE8EF-26-T-1577
The contract specifies the procurement of 16 material handling rollers identified by NSN 3990-01-588-5068 and part number 5250126, manufactured by ETNYRE & CO, with all metal structural components painted tan 686 using CARC coating, excluding plastic roller wheels and plated fasteners. The item must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, including palletization as defined in RP001. The unit of issue is each, with a fixed quantity of 16 units and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at destination, and the product must be shipped no later than February 1, 2027, to fulfill the original delivery requirement of January 16, 2027, within a 167-day delivery window. Packaging must align with DLA standards and be addressed to DDSP New Cumberland Facility in New Cumberland, PA, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was issued under SPE8EF-26-T-1577 as a Women-Owned Small Business Set-Aside, with a response deadline of August 17, 2026, and the contract falls under NAICS code 325211 for chemical and allied products manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3831
The contract pertains to the procurement of 16 units of filament, additive M, with the NSN 9330-01-698-3314 and part number 355-02130 from Stratasys, Inc., under solicitation SPE8E5-26-T-3831. The unit price is $16.00 per ea, totaling $256.00, with delivery required FOB origin within 167 days of the contract award, and the original required delivery date is November 17, 2026, with a need ship date of February 1, 2027. No variance is permitted in quantity, with zero percent tolerance for both over and under shipment. Inspection and acceptance occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, California. Packaging must comply with DLA Master List of Technical and Quality Requirements, prioritizing those identified by R or I numbers over ASTM D3951, and for non-hazardous material, packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements. Hazardous material, if applicable, must adhere to TQ requirement IP025 per FED-STD-313. All packaging must be marked and labeled in accordance with MIL-STD-129, and palletization must meet RP001 standards. The Unit of Issue and Quantity per Unit Pack are strictly as specified. Transportation instructions are governed by DLAD Proc Note C19 for freight and C20 for first destination. The contract was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 325211, and the point of contact is Khue Nguyen of the Department of Defense, DLA District San Joaquin.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
PLASTIC MOLDING MAT
Solicitation # SPE8E5-26-T-3837
The contract is for the procurement of 25 plastic molding mats with NSN 9330-01-672-6974 and part number 355-02114 from Stratasys, Inc., under solicitation SPE8E5-26-T-3837. The unit price is $25.00 per EA, with a total contract value of $625.00, and delivery is required within 26 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001. If hazardous under FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging in compliance with ASTM D3951 is acceptable, though DLA requirements take precedence. Palletization must follow RP001 standards, and all packaging must be marked and labeled correctly. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for freight shipping and parcel post. The need ship date is September 13, 2026, and the original required delivery date is October 30, 2026. Transportation guidelines are defined in DLAD Proc Notes C19 and C20. The primary point of contact is Khue Nguyen, reachable via email and phone, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
ROLLER, MATERIAL HAN
Solicitation # SPE8EF-26-T-1573
The contract pertains to the procurement of 53 rollers for material handling with the NSN 3990-01-554-9920 under solicitation SPE8EF-26-T-1573, issued as a Service-Disabled Veteran-Owned Small Business Set-Aside. Delivery is required within 174 days from award, and the work will be performed at Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through its Construction & Equipment Manufacture and Construction agency. The primary point of contact is Russell Keiser, reachable via email and phone provided. This contract incorporates stringent cybersecurity, export control, and quality requirements. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) and adhere to Defense Logistics Agency packaging and configuration change management standards. Technical data associated with the item is subject to export controls under ITAR or EAR, meaning any disclosure to foreign persons—even within the U.S.—requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to this technical data is restricted to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export-controlled data training and received DLA authorization. The contract also mandates removal of government identification from non-accepted supplies and enforces compliance with the DLA Master List of Technical and Quality Requirements, using the revision in effect at the time of solicitation or amendment.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3849
The contract specifies the procurement of 10 units of filament, additive M, with NSN 9330-01-716-3970 and part number FIL0040012500175, under solicitation SPE8E5-26-T-3849. Delivery is required FOB origin within 167 days of the original required delivery date of January 4, 2027, with a firm 100% quantity tolerance and inspection and acceptance occurring at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over ASTM D3951; if hazardous per Fed-Std-313, packaging must follow TQ requirement IP025, otherwise commercial packaging per ASTM D3951 applies, and all labeling must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, including palletization standards. The unit of issue is each, with a unit price of $10.00 and total price of $100.00. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and the first destination transportation and shipping instructions follow DLAD Proc Notes C19 and C20. The supplier is Essentium Inc, and all technical and quality compliance is bound to the DLA Master List revision in effect at the solicitation issuance date, with no variances permitted. The point of contact is Khue Nguyen, and the response deadline for the solicitation was August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
PLASTIC SHEET, PRESS
Solicitation # SPE8E5-26-T-3789
The contract specifies the procurement of 11 rolls of white, pressure-sensitive adhesive coated plastic sheeting, each 50 yards long, 24 inches wide, and 0.003 inches thick, with no perforations and a plain surface. The unit of issue is the roll (RO), and the material is identified by NSN 9330-00-839-0907 and part number AA59485-A-1, governed by DLA’s Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with hazardous material handling dictated by FED-STD-313 and TQ requirement IP025 if applicable; otherwise, commercial packaging per ASTM D3951 is acceptable only if not contradicted by DLA requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent, and inspection and acceptance occur at the destination. The required delivery date is November 12, 2026, with a 167-day allowed delivery window, and the ship date is set for February 1, 2027. The contract is issued under solicitation SPE8E5-26-T-3789, with the purchase request number 7017757876 and a total quantity of 11 rolls. All packaging and labeling must adhere to DLA standards, and the material must be delivered to the designated DDSP New Cumberland Facility in Pennsylvania. Transportation and freight instructions are governed by DLAD proc notes C19 and C20, and technical specifications referenced by R-numbered requirements are accessible via the DLA website. The point of contact for inquiries is Khue Nguyen, with email and phone provided for support.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
Additive Manufacturing Filament Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
PLASTIC SHEET, PRESS
Solicitation # SPE8E5-26-T-3765
The contract specifies the procurement of pressure-sensitive adhesive plastic sheeting under NSN 9330-01-327-1341, with a unit of issue of 1 RO equivalent to 50 yards. The item is classified as a Type I (Code M) with a non-extendable shelf life of 24 months, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129K, which substitutes for MIL-L-61002 as waived by DLA Troop Support. Marking must include the special code 32 indicating Type I shelf life, and the use of plastic as wrapping, cushioning, or dunnage is to be avoided where feasible. The item is subject to DLA Packaging Requirements and technical quality standards referenced via R and I numbers from the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. Delivery is mandated FOB destination within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination point. The contract identifies three qualified suppliers—Maniabarco Inc., Kent Adhesive Products Co., and Avery International Fasson Industrial Division—with part numbers P20878C, 9030FY, and 1016-1550 respectively. The delivery address is Osan Air Base in South Korea, with a parcel post address in APO AP 96278-2069, and transportation details follow DLAD Procurement Notes C19 and C20. The shipment is identified as RDD 777 under Project TP 2, and the point of contact is Brandon Wicker of the Defense Logistics Agency, reachable via phone and email. The solicitation number is SPE8E5-26-T-3765, issued on August 4, 2026, with a response deadline of August 17, 2026, and the required delivery date is August 1, 2026. The North American Industry Classification System code is 325211, and the contracting authority is the Department of Defense under the Defense Logistics Agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3774
The contract pertains to the procurement of Filament, Additive M, with the NSN 9330-01-709-0211 and part number F-MF-0006 from Markforged Inc, requiring delivery of five units within twenty days from the award date, shipped FOB origin. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements, with hazardous material governed by TQ requirement IP025 and non-hazardous material packaged commercially per ASTM D3951 unless overridden by a DLA requirement. Palletization must follow RP001 guidelines, and the shipment must be sent via traceable means, explicitly prohibiting parcel post. The delivery destination is the Ghost AWCF SSF at Building 3810, 20th Street, Lewis McChord, WA 98433-0000, with inspection and acceptance occurring at the destination. The unit of issue is each, with no variance allowed in quantity. The contract number is SPE8E5-26-T-3774, with a required delivery date of August 6, 2026, and a response deadline of August 17, 2026. The solicitation is classified under NAICS code 325211 and is managed by the Defense Logistics Agency under the Department of Defense, with point of contact Khue Nguyen. Government use identifiers and shipping codes are included for internal tracking, and the material is subject to Covered Defense Information provisions. All packaging and marking must reflect the specified QUP of 001 and government control labels as outlined.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
FILAMENT, ADDITIVE M
Solicitation # SPE8E5-26-T-3762
The contract is for the procurement of 2 units of filament, additive M, under solicitation SPE8E5-26-T-3762, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is identified by NSN 9330-01-708-8854 and purchase request 7017727243, with a unit price of $0.00 and total price of $0.00, to be delivered in 20 days FOB origin with no tolerance for quantity variance. Delivery must be made to the designated military facility at 2002 South Holt Road, Building 12, Stout Field, Indianapolis, IN 46241-4839, with shipment required by the fastest traceable means excluding parcel post. All packaging must comply with DLA packaging requirements and MIL-STD-129 marking standards, with hazardous material handling governed by TQ requirement IP025 if applicable, or ASTM D3951 if non-hazardous, though DLA’s Master List of Technical and Quality Requirements supersedes all other standards. The contract mandates palletization in accordance with RP001 and specifies the unit of issue as EA with one unit per pack. The product is classified under NAICS code 325211 and the solicitation closes on August 17, 2026, with an original required delivery date of July 31, 2026. The point of contact is Khue Nguyen, reachable via phone and email provided, and the shipment must be marked with the government tracking number W91DWJ62090414 and RDD 555. Government-only data fields indicate internal tracking codes including IPD 13, DIC A3A, and FC 61. The contract incorporates all applicable technical and quality specifications from the DLA Master List, applicable as of the solicitation issue date, and does not allow for deviations from packaging, labeling, or delivery standards. The item is intended for government use only, with no set-aside provisions, and performance is localized to the specified Indianapolis delivery point.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
SLED
Supply of HDPE Piping and FittingsThe contract involves the supply of HDPE DR 11 pipe along with a range of associated fittings made from PVC, HDPE, ductile iron, steel, and brass for the main line and distribution network of an irrigation system. The work is intended to support infrastructure development for water distribution, requiring materials that meet technical specifications for durability, pressure ratings, and compatibility within an irrigation context. All components must be compatible with each other and suitable for long-term underground or buried installation under varying environmental conditions. The solicitation is categorized as a subcontract with a response deadline of September 10, 2026, and was posted on August 4, 2026. The North American Industry Classification System code 325211 indicates the focus is on plastic pipe and profile product manufacturing. The contracting entity is the Putnam County Board of Commissioners in Georgia, though specific performance location and point of contact details are not provided. Bidders must ensure compliance with all material standards and delivery requirements outlined in the full solicitation through the provided state portal link.
Putnam County Board of Commissioners

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 325211
New
Federal
Nafion 1110
Solicitation # 41-0293
The Naval Surface Warfare Center Philadelphia Division is seeking to procure six rolls of Nafion 1110, totaling 118.20 square meters, through a sole-source acquisition from Proton Energy Systems Inc. / Nel Hydrogen US. This action is being conducted under the authority of FAR 6.302, as the item is proprietary and only available from this single source, with no viable alternatives for the government’s requirements. The solicitation number is 41-0293, and responses must be submitted by August 19, 2026, at 4:00 PM Eastern Time, with the notice posted on August 4, 2026. The North American Industry Classification System code for this procurement is 325211, and the place of performance is Philadelphia, Pennsylvania, with delivery expected to the agency’s location at 19112-1403. All inquiries must be sent via email to joseph.w.aprile2.civ@us.navy.mil; phone calls are not accepted. The contracting office is part of the Department of Defense, with Joseph Aprile listed as the primary point of contact.
Nswc Philadelphia Division

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details