Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, COMPONENT MOUNTI

Active
SPE4A5-26-T-329NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a component mounting plate for aircraft gas turbines, identified by part number 5168T10G01 and NSN 2840-01-667-1342, with a requirement for 12 units to be delivered within 190 days from the contract award. The item is designated as a critical application component, subject to stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All supplies must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special marking codes applied. Sampling and inspection procedures follow MIL-STD-1916 or Asq H1331 zero-based plans, with critical, major, and minor attributes assigned corresponding verification levels or AQLs unless otherwise specified; any unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot, with inspection and acceptance occurring at the destination. The delivery is FOB origin, with no variance allowed in quantity, and the sole delivery point is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA procurement system, with transportation rules outlined in DLAD PROC NOTES C19 and C20, and the supplier must adhere to the referenced technical specifications and quality provisions without exception.

General Info

Procure 12 critical turbine mounting plates, deliver to Cherry Point in 190 days, comply with rigorous military standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-329N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kirstie Ragsdale
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,COMPONENT MOUNTING,AIRCRAFT GAS TU
PLATE<(>,<)> COMPONENT MOU
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THERMAL STRUCTURES, INC 54787 P/N 5168T10G01
GENERAL ELECTRIC COMPANY 99207 P/N 5168T10G01
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-329N
SECTION B
PR: 7017749085 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017749085 0001 EA 12.000
NSN/MATERIAL:2840016671342
DELIVERY (IN DAYS):0190
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2027
SPE4A5-26-T-329N NSN/Part Number: 2840-01-667-1342 Quantity: 12 EA Purchase Request: 7017749085QTY: 12 Delivery: 190 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
MODULATOR ASSEMBLY,
Solicitation # SPE4A5-26-T-325G
The contract specifies the procurement of one unit of a Modulator Assembly, Exciter, Ignition, identified by NSN 2920-01-573-0929 and part numbers 0-300-261-01 for Honeywell International Inc. and V0-300-261-01 for Vericor Power Systems LLC. It is classified as a commercial item and is designated as a critical application item requiring strict adherence to labeling, packaging, and marking standards per MIL-STD-129 and MIL-STD-2073-1E, with no special marking codes required. Packaging must comply with DLA packaging requirements, including use of intermediate and unit containers coded E5, and palletization standards. The item is subject to tailored higher-level quality requirements, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is due in 171 days, with an original required delivery date of September 25, 2027, and a need ship date of January 31, 2027. The contract specifies FOB origin delivery, with zero variance permitted in quantity, and requires compliance with hazardous materials shipping protocols. The item is not subject to Item Unique Identification per customer request. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with the procurement executed under a total small business set-aside, NAICS code 333611. All documentation, including unit of issue and transportation instructions, references DLA procedural notes and official DLA web resources. The sole point of contact for the solicitation is Evgeny Korovin, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
BLADE SET, COMPRESSO
Solicitation # SPE4A6-26-T-12LW
This contract pertains to the procurement of a single blade set for a non-aircraft gas turbine compressor, identified by part number 10-10012-01, manufactured by Honeywell International Inc. and sourced through Vericor Power Systems LLC. The item is governed by stringent technical and quality requirements incorporated from the DLA Master List, with compliance mandated across manufacturing, documentation, packaging, and inspection processes. All supplies must meet zero-defect sampling standards under MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring the strictest verification levels. The blade set is designated as a critical application item and must be mercury-free, with no intentional use of mercury or mercury-containing compounds except in permitted exceptions such as specified instruments or batteries, all of which must include secondary containment per NAVSEA standards. Packaging and marking must fully adhere to MIL-STD-2073-1E and MIL-STD-129, with individual blades separated to prevent contact and damage, and palletization conforming to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance performed at origin, and the item must be delivered within 20 days to Camp Pendleton, California, via traceable means exclusively—parcel post is prohibited. The NSN is 2835-01-538-6223, and the contract includes specific logistics, transportation, and marking directives, with a required delivery date of July 29, 2026. Configuration control, engineering change proposals, and deviation requests are tightly managed under RQ002, and all documentation must support source approval per RC001. The contract enforces full traceability, government identification removal procedures for non-accepted items, and tailored quality requirements applicable to both manufacturers and non-manufacturers.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
BRACKET, DUCT
Solicitation # SPE4A7-26-T-616K
The contract pertains to the procurement of a bracket, duct with part number 5170T16G01, supplied by Thermal Structures, Inc and General Electric Company, under NSN 2840-01-666-6902. A total quantity of 36 units is required, to be delivered FOB origin within 190 days from the contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the origin, and all items must comply with stringent quality and documentation requirements as defined by DLA’s Master List of Technical and Quality Requirements identified by R and I numbers, including tailored higher-level quality standards. The sampling method must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical attributes must be verified at Level VII or with an AQL of 0.1. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. All items must be palletized per RP001, and the delivery destination is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA’s procurement directives, including transportation and freight guidelines, and the unit of issue is each (EA). The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under NAICS code 333611, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
BRACKET, SCAVENGER
Solicitation # SPE4A7-26-T-616H
The contract pertains to the procurement of a BRACKET, SCAVENGER with NSN 2840-01-666-6891 and part number 5158T51G01, with a quantity of 36 units to be delivered FOB origin within 190 days of contract award, with no tolerance for variance in quantity. All items must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with sampling and inspection governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, and marking must conform to MIL-STD-129 without special markings. Palletization follows DLA packaging guidelines, and the delivery destination is DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-616H, with a response deadline of August 12, 2026, and the unit price is $36.00 per unit, totaling $1,296.00. Approved suppliers include Lighthouse Manufacturing LLC and General Electric Company, and the procurement is classified under NAICS code 333611. All deliveries are subject to final inspection and acceptance at the destination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
SEAL RING
Solicitation # SPE4A6-26-T-12RM
The contract pertains to the procurement of a SEAL RING with NSN 2825-01-062-9302, quantity of two units, under solicitation SPE4A6-26-T-12RM, with a response deadline of August 12, 2026. Delivery is required within 157 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at origin. Mercury or mercury-containing compounds are strictly prohibited unless used in functional applications such as batteries, fluorescent lights, instrument controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices requiring shockproof construction and a secondary containment barrier compliant with NAVSEA 5100-003D. Item Unique Identification is not mandated per customer request, and government identification must be removed from non-accepted supplies. Packaging must conform to DLA standards, and measuring and test equipment must meet specified criteria. Physical identification and bare item marking standards are required. The place of performance is in New Cumberland, Pennsylvania, with Stephanie Cruz as the primary point of contact. The solicitation falls under NAICS code 333611 and is managed by the ASC Commodities Division of the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
NOZZLE ASSEMBLY
Solicitation # SPE8E5-26-T-3771
The contract pertains to the procurement of 48 nozzle assemblies with NSN 3433-01-158-2846 under solicitation SPE8E5-26-T-3771, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 78 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with no variance allowed, and packaging must comply strictly with DLA’s Packaging Requirements for Procurement, including MIL-STD-129 labeling and either commercial packaging per ASTM D3951 or hazardous material packaging per TQ requirement IP025 if applicable. All packaging and palletization must adhere to RP001. The material must not contain intentional mercury or mercury compounds except in specific exceptions like batteries, fluorescent lamps, sensors, or weapon systems, and any portable mercury-containing items must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The DLA Master List of Technical and Quality Requirements governs all specifications, overriding any conflicting standards. The contract requires compliance with Covered Defense Information protocols and references the DLA eProcurement portal for applicable technical and quality requirements identified by R or I numbers. The delivery address and shipping instructions are identical, directed to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of November 4, 2026, and original delivery deadline of November 10, 2026. Unit of issue is each (EA), and all documentation must reference the correct ANSI X12 unit of issue via the official DLA link.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333611
New
Federal
NSN 2835-01-152-6306, FUEL CONTROL SERVOVALVE, WSDC: 05F, AIRCRAFT, STRATOLIFTER C/KC
Solicitation # SPE4A726R0746_SourcesSought
The Defense Logistics Agency Aviation is conducting market research to identify qualified sources capable of manufacturing or legitimately obtaining the fuel control servovalve with NSN 2835-01-152-6306, a critical aircraft component used in the Stratolifter C/KC fleet under Weapon System Designator Code 05F. Currently, this item is sole sourced from RTX Corporation under part number 161403-3 and Woodward Inc under part number 100312-003, and the agency seeks to determine whether alternative suppliers can meet or exceed the existing quality and performance standards. This sources sought notice is strictly for market research purposes and does not constitute a solicitation, request for proposal, or binding commitment by the government; no funds are available for response preparation, and submissions are voluntary. Interested parties must submit their responses by August 10, 2026, at 10:00 a.m. Eastern Standard Time via email to Tatjana Klemmer at tatjana.klemmer@dla.mil. Companies wishing to become approved sources must complete a Source Approval Request (SAR) package, following the guidelines outlined in the Aviation Source Approval and Management Handbook, which requires comprehensive documentation to prove technical equivalence or superiority to the current approved item. The SAR process involves detailed demonstrations of manufacturing capability, quality control systems, and adherence to regulatory standards under the Competition in Contracting Act, FAR, and DFARS, and reviews may take more than 180 days. The contracting office is located at 6090 Strathmore Rd., Richmond, VA 23237, and submissions must align with DoD procedures for electronic transmission when applicable.
DLA Aviation

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
Federal
TURBINE ROTOR,TURBI
Solicitation # N0010426QJC05
This contract solicits repair services for the TURBINE ROTOR, TURBI under a firm-fixed-price structure with a required Repair Turnaround Time (RTAT) of 370 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with the original manufacturer’s specifications, MIL-STD-130 Rev N marking requirements, and approved technical documentation, with no design or part substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. Government Source Inspection is mandatory, and the contractor is responsible for all inspection and testing, maintaining complete records for 365 days after final delivery. Freight is FOB Origin, and the Navy handles logistics per the CAV Statement of Work. The contract includes options to increase quantity within 365 days after award, with pricing locked at the bid rate unless otherwise negotiated. Failure to meet the RTAT results in a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. The contractor must be an authorized distributor of the original manufacturer, with proof provided at submission, and must certify compliance with Buy American and small business subcontracting requirements. Cybersecurity maturity certification and security exclusions under recent deviations are enforceable, and all documentation is subject to Distribution Statement controls per OPNAVINST 5510.1. Pricing must be justified if not aligned with historical data or commercial sales, and if an item is deemed beyond economic repair, a negotiated T&E fee not to exceed a specified amount may apply. The award will be bilateral, requiring signed contractor acceptance before execution, and all quotes must include unit and total prices, RTAT, and details on new unit pricing and lead time for comparison purposes. The contract is administered by NAVSUP WSS in Mechanicsburg, PA, with Kristina L. Alexander listed as the point of contact.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333611
New
DIBBS
Cooling System Pump SupplyThe contract calls for the supply of two military-grade cooling system pumps identified by NSN 2930016904063, requiring full compliance with all defense specifications for performance, packaging, and labeling standards. The items must be delivered to a designated carrier at the point of origin with all necessary documentation to ensure traceability and regulatory adherence throughout the logistics chain. The performance location is Fort Eustis, VA, with a ZIP code of 23604-5577, indicating the final destination for these critical components used in defense systems. This is a total small business set-aside under SBA guidelines as defined by FAR 19.5, with the North American Industry Classification System code 333611, indicating the work falls within pump and pumping equipment manufacturing. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the contracting activity managed by the Department of Defense under the Land Supply Chain organization. The contract is classified as a subcontract, meaning it is part of a larger procurement structure, and the official solicitation can be accessed via the DIBBS platform using the provided link.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
BLOCK, PIVOT
Solicitation # SPE7L1-26-T-906P
This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
SEAL, METALLIC, NONAI
Solicitation # SPE7M4-26-T-298C
The contract specifies the procurement of one metallic non-ai seal with NSN 2835-01-732-7814 and part number 16196 from Eaton Corporation, to be delivered FOB origin within 392 days of contract award, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with inspection and acceptance occurring at the destination. Transportation logistics are governed by DLA procedural notes C19 and C20, and all unit of issue requirements align with DoD standards. The solicitation was issued under SPE7M4-26-T-298C with a response deadline of August 14, 2026, and the item falls under NAICS code 333611 for fluid handling systems. The primary point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
Turbine Engine Blade Supply (OEM or Authorized Distributor)The contract involves the supply of commercial off-the-shelf turbine engine blades designated by NSN 2835-014578177 and Part Number L47576P01, which must be directly traceable to General Electric as the original equipment manufacturer. Delivery is structured under FOB Origin terms, meaning the buyer assumes all shipping costs and risks once the blades leave the supplier’s location. Inspection of the blades is to be conducted at the origin prior to shipment, ensuring compliance and quality assurance before transport. The solicitation is classified as a subcontract under NAICS code 333611, which corresponds to turbine and turbine generator set manufacturing. The contracting activity is linked to the Department of Defense through SPRMM1 DLA Mechanicsburg, indicating the blades are intended for military or defense-related applications. The response deadline is set for August 14, 2026, with the posting date occurring on August 3, 2026, providing a window for interested parties to submit proposals.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
Electrical Connector Supply (Plug, Electrical)
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-330M
The contract specifies the procurement of 36 digital, self-indicating thermometers, identified by the part number FLUKE 62 MAX and NSN 6685-01-613-2829, as a commercial off-the-shelf item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. The item must meet stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a special marking code for “Delicate instrument.” Preservation methods prohibit mercury or mercury compounds in packaging and require dry, controlled environments. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned the highest verification levels. Delivery is FOB origin with a strict 36-unit quantity allowance with no variance permitted, and the item must be delivered to a designated DLA warehouse in Tracy, California, by January 31, 2027, after an initial required delivery date of November 25, 2026. Transportation and shipping instructions align with applicable DLA procedural notes, and the contract is administered under solicitation SPE4A5-26-T-330M with a unit price of $36.00 per unit.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details