Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, DUPLEX, SURFACE A

Active
SPE8E6-26-T-4404Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one duplex surface and lapping plate, identified by NSN 3460-01-017-7487. The required item is a cast iron plate measuring 8 inches wide by 8 inches long and 1 inch thick, featuring one smooth side and one grooved side, precision ground flat within 0.00025 inches overall. The order is assigned to Do All Industrial Supply Corp with a delivery requirement of 5 days after order. The procurement is subject to specific DLA packaging requirements and technical quality standards, including the removal of government identification from non-accepted supplies and the potential application of covered defense information. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with strict acceptance criteria based on zero non-conformances. The solicitation is open for responses until September 11, 2026, with performance located in Pascagoula, Mississippi.

General Info

DLA procurement of one cast iron lapping plate from Do All Industrial Supply.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

PO BOX 7003, PASCAGOULA, MS, 39567-7003, USA

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-4404 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
Contacts
Kathleen Selover
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,DUPLEX,SURFACE AND LAPPING
PLATE, DUPLEX, SURFACE AND LAPPING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAST IRON, 8 IN. W, 8 IN. LG, 1 IN. THK, SMOOTH
ONE SIDE, GROOVED ONE SIDE, PRECISION GROUND
FLAT WITHIN 0.00025 IN. OVERALL.
DO ALL INDUSTRIAL SUPPLY CORP
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TECH DATA PACKAGE AVAILABILITY
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 3460-01-017-7487 Quantity: 1 EA Purchase Request: 7018097243QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE4A5-26-T-398L
This contract is for the procurement of eight profile gages, identified by NSN 5220-01-374-1341 and part number 70700-77383-041 for Sikorsky Aircraft Corporation. The order is managed under solicitation SPE4A5-26-T-398L with a required delivery date of November 28, 2027. Delivery is set for 445 days after order, with shipping designated as FOB Origin and inspection and acceptance occurring at the destination. The agreement includes specific quality and security mandates, including CMMC Level 2 Self-Assessment and the application of Covered Defense Information. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, with shipments directed to the DLA Distribution New Cumberland facility in Pennsylvania. Item Unique Identification is not required per the customer's request, and an alternate sampling plan via Sikorsky Corporation is acceptable provided it meets ASQ H1331 or MIL-STD-1916 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333515
New
DIBBS
Supply of NSN 3460016446822 Industrial PartThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of industrial component NSN 3460016446822. The contractor is required to deliver the parts within 20 days under FOB Destination terms, ensuring all items adhere to strict packaging, labeling, and inspection standards. The performance location is designated as FPO 34088. The procurement falls under NAICS code 333515. The solicitation was posted on August 30, 2026, with a response deadline of September 10, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
KEY, DRILL CHUCK
Solicitation # SPE8E5-26-T-4090
This contract, identified as SPE8E5-26-T-4090, is a solicitation by the Defense Logistics Agency for the procurement of one drill chuck key, part number 5140088-64 from Delta Power Equipment Inc. The item is associated with NSN 3460016446822 and is destined for the USS Billings (LCS-15). Delivery is required within 20 days after receipt of the order, with an original required delivery date of January 23, 2026. The agreement specifies that shipping is FOB Destination, with inspection and acceptance also occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies. Shipment must be made via the fastest traceable means, specifically prohibiting the use of parcel post.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
CUTTER BIT, TOOL HOL
Solicitation # SPE8E5-26-T-4096
This contract is for the procurement of one cutter bit tool holder, identified by NSN 3455012020569 and part number MDJNR-24-5-E. The order is governed by solicitation SPE8E5-26-T-4096 and requires delivery within 20 days. The item must be delivered FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and ASTM-D-3951-98, and marking standards MIL-STD-129. Shipping is to be handled via the fastest traceable means to DLA Distribution OKC at Tinker AFB, Oklahoma. The contract also specifies the removal of government identification from non-accepted supplies and notes that covered defense information potentially applies.
OKC CP

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
DIAL INDICATOR SET
Solicitation # SPE8E5-26-T-4102
This solicitation is for the procurement of one Dial Indicator Set, identified by NSN 5210-01-655-2586 and part number 8020253900300-1. The item is a MIPR item to be purchased directly from NSWC Crane. Delivery is required within 20 days after receipt of order. The material has no shelf life requirement and must comply with strict prohibitions against the intentional addition of mercury or mercury-containing compounds, per NAVSEA standards. The contract incorporates various technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Suppliers must adhere to the Hazard Communication Standard by providing Safety Data Sheets and compliant labeling for any hazardous materials. Additionally, the item is subject to export controls under ITAR or EAR regulations, requiring contractors to have approved certifications and training to access technical data.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
WHEEL, ABRASIVE
Solicitation # SPE8E5-26-T-4101
Contract SPE8E5-26-T-4101 is a solicitation issued by the Defense Logistics Agency for the procurement of seven abrasive wheels, identified by NSN 3460-01-088-2910. The specified items are silicon carbide wheels with a rubber binder, measuring 8.000 inches in overall diameter, 1.000 inch in thickness, and featuring a 0.500 inch arbor hole diameter. Compatible part numbers include Cratex Manufacturing Co. 816M and Matz Rubber Company 809M. The contract requires delivery within 20 days after the order, with shipping designated as FOB Origin and inspection and acceptance occurring at the destination in Egg Harbor Township, New Jersey. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. Quality assurance and sampling shall follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The procurement is managed under NAICS code 333515 and incorporates the DLA Master List of Technical and Quality Requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
GAGE, DEPTH, RULE
Solicitation # SPE8E5-26-T-4098
This solicitation, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-4098, is for the procurement of one depth rule gage, identified by NSN 5210-01-602-6297. The requirement is managed by DLA Troop Support Construction and Equipment with a delivery deadline of 20 days after the order is placed. The place of performance is located in Jacksonville, and the response deadline for quotations via DIBBS is September 10, 2026. The contract is subject to several critical technical and regulatory requirements. It incorporates the DLA Master List of Technical and Quality Requirements and mandates compliance with Cybersecurity Maturity Model Certification Level 2. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additionally, the procurement follows standard federal acquisition regulations, including Buy American provisions and HUBZone preferences.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-22TZ
This contract is for the procurement of 21 indicator lights, identified by NSN 6220992331322 and part number 347/20547 from JCB Inc. The agreement specifies a delivery timeframe of 135 days after order, with a required delivery date of April 15, 2027. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict quality and packaging standards, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and specific sampling methods per MIL-STD-1916 or ASQ H1331. Technical and quality requirements are governed by the DLA Master List, and the contract mandates the removal of government identification from non-accepted supplies and specific physical item marking. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 333515
New
DIBBS
LAMP, LIGHT EMITTING DI
Solicitation # SPE4A6-26-T-23PS
This contract is for the procurement of 74 light emitting diode lamps, identified by NSN 6220016068226 and part number 980507257 from Hella Inc. The order is managed under purchase request 7018069411 with a required delivery date of January 7, 2027, and a delivery timeframe of 125 days. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous nature of the materials, packaging must follow either TQ requirement IP025 or ASTM D3951. Additionally, the contract incorporates various technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 333515
New
DIBBS
LIGHT ASSEMBLY, INDICAT
Solicitation # SPE8E7-26-T-3694
This contract, identified as SPE8E7-26-T-3694, is a solicitation issued by the Defense Logistics Agency for the procurement of two indicator light assemblies, part number 5252105 and NSN 6220015884675. The delivery is required within 20 days after receipt of the order, with a required delivery date of August 24, 2026. The shipment is destined for US Forces 378 ELRS LGRDDC at Prince Sultan Air Base, Saudi Arabia, with shipping terms set as FOB Origin. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on the hazardous nature of the material, packaging must follow either TQ requirement IP025 or ASTM D3951. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies to this procurement.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 333515
New
Federal
Live Fire Fabrication Tools
Solicitation # W911S226U3940
The U.S. Army Office at Fort Drum, under the Department of Defense, is seeking authorization to procure specialized fabrication tools required to produce 800 rotating target mounts for use in Rotational Live Fire Training Exercises. These tools are critical for cutting, welding, drilling, and assembling the mounts to precise strength and performance standards, ensuring they meet the operational demands of live fire training. Without the proper tooling, the Operations Group cannot achieve the necessary production volume or timeline adherence, compromising the efficiency and effectiveness of training exercises. The procurement will enable long-term sustainment of the target mounts and directly enhance training outcomes by improving target reorientation speed and overall live fire flexibility. This solicitation is designated as a Small Business Set Aside under NAICS code 333515, targeting qualified small businesses to fulfill the requirement. The combined notice was posted on August 5, 2026, with a response deadline of August 14, 2026. The place of performance is listed as 92310, and the primary point of contact is Garfield Fairclough, reachable via phone or email. The solicitation number is W911S226U3940, and all correspondence and submissions must follow the official SAM.gov portal link provided. The contract aims to secure not just equipment, but the foundational capability to maintain and scale live fire training readiness across the force.
W6QM Micc-Ft Drum

POSTED

5 days ago

DEADLINE

in 4 days
View Details
NAICS: 333515
New
DIBBS
HOLDER SECTION, CUTT
Solicitation # SPE8E5-26-T-4073
This contract, identified as SPE8E5-26-T-4073, is a solicitation issued by the Defense Logistics Agency for the procurement of 30 units of part number BH46HM017 (NSN 3460-01-620-4101) from FECON, LLC. The agreement specifies a delivery timeframe of five days and requires shipment via the fastest traceable means to the Distribution Management Office in Beaufort, South Carolina. The original required delivery date is set for August 24, 2026. The contract mandates strict adherence to DLA packaging and marking standards, specifically referencing MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. It incorporates technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332919
New
DIBBS
ACTUATOR, ELECTRO-ME
Solicitation # SPE7MC-26-T-244B
This contract is for the procurement of one electro-mechanical linear actuator, identified by NSN 4810-01-614-2510 and part number AG13B020 from Schneider Electric Buildings Americas. The item is to be delivered to the USS Cooperstown LCS 23 within 20 days of order. The agreement specifies that the delivery is FOB Destination, with both inspection and acceptance occurring at the destination point. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Shipping must be conducted via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
FILLER CAP, BATTERY
Solicitation # SPE7L7-26-T-5041
This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of five battery filler caps, identified by NSN 6160-01-548-8529. The contract requires delivery within 20 days after receipt of order and is associated with solicitation number SPE7L7-26-T-5041. Performance is designated for Fort Hood, Texas, under NAICS code 335910. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DLA training and questionnaires, and receive approval from the DLA controlling authority.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
NON-NSN ITEM
Solicitation # SPE3SE-26-Q-0453
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE3SE-26-Q-0453 for the procurement of two units of non-NSN item part number 7310GM5022323. This federal requirement is associated with purchase request 7017931188. The solicitation was posted on August 31, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-5377
This contract is for the procurement of one core assembly fluid cooler, identified by NSN 4420013899046 and Cummins Inc. part number 4933306. The agreement is managed by the Defense Logistics Agency and requires delivery to Coastal Riverine Squadron One in San Diego, California, within 20 days. The shipment must be sent via the fastest traceable means, excluding parcel post, with FOB origin and inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. A critical restriction is placed on the use of mercury, which shall not be intentionally added to the hardware except in specific functional cases approved by NAVSEA. Additionally, the contract incorporates guidelines for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-Q-2340
This contract is a firm fixed price solicitation from the Defense Logistics Agency for the procurement of lead acid battery power supplies, specifically part number FA00006 from Intellipower, Inc. The requirement consists of two separate line items, each for one unit, with a delivery timeframe of 60 days after order. The items are designated as critical application items with a non-extendable shelf life of 12 months. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including hazardous materials standards and MIL-STD-129 for marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Shipments are destined for the USS Mitscher DDG 57 and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-26-Q-2342
This contract, solicitation number SPE7L7-26-Q-2342, is issued by the Defense Logistics Agency for the procurement of three uninterruptible power supplies, part number DSGXT4-1000RT120 from Motorola Solutions, Inc. The agreement is a firm fixed price contract with a delivery requirement of 60 days after the order is placed. The items are designated as critical application items and are destined for the USS Marinette (LCS 25) and the USS Carl M. Levin (DDG 120). The contract mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment and specific DLA packaging and marking requirements. Because the items contain sealed lead acid batteries, they are subject to hazardous materials communication standards, specific shelf life requirements of 12 months, and strict mercury-free mandates. Inspection and acceptance will occur at the point of origin, and shipping must be handled via the fastest traceable means to the specified vessel locations.

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATING
Solicitation # SPE8ES-26-T-2677
This contract is for the procurement of one kit of gray polyurethane coating, specifically Type 4 Class H for aircraft applications with extended weatherability, conforming to MIL-PRF-85285 and FED-STD-595 color 36622. The manufacturer must be QPL approved at the time of award. The item has a 12-month extendable shelf life and must be delivered FOB destination to Davis Monthan AFB within 20 days. The supplier is required to adhere to strict packaging and safety standards, including MIL-STD-129 for marking and RP001 for DLA packaging. Because the material is hazardous, the supplier must provide Safety Data Sheets and HCS labels in accordance with 29 C.F.R. 1910.1200 and FED-STD-313-E. The kit, consisting of parts A and B to produce 1.89 liters, must be securely packaged in approved containers with an itemized list of contents to prevent damage and leakage during shipment.
Paint and Coating Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Solicitation # SPE7L7-26-Q-2347
This contract is a firm fixed price solicitation for the procurement of two non-spillable lead acid battery assemblies, identified as commercial off the shelf items with part number M350380. The items are designated as critical application components and are subject to a non-extendable six month shelf life. Delivery is required within 60 days after receipt of the order, with inspection and acceptance occurring at the point of origin. The batteries are destined for the USS Michael Murphy and the USS William P Lawrence. The supplier must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with OSHA and federal regulations. Specific restrictions are placed on the use of mercury, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of domestic fiberboard pads. All shipments must follow DLA packaging requirements for procurement and specific hazardous material shipping protocols.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-Q-2341
This contract is a solicitation from the Defense Logistics Agency for the procurement of four battery power supplies, identified by NSN 6130-01-647-5605. The agreement is structured as a firm fixed price contract with a delivery requirement of 60 days after order. The items are destined for the USS George H W Bush CVN 77 and the USS Kidd DDG 100, with specific shipping and handling instructions for vessel delivery. Key technical requirements include a non-extendable 12-month shelf life and strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury, except where functionally required for batteries. This is a total small business set-aside procurement with inspection and acceptance occurring at the point of origin.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-Q-0481
This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for the procurement of one refrigeration compressor, identified by NSN 4130-01-622-3092. The item is associated with part number 4721999 from John Deere Shared Services and West Side Tractor Sales Co. Delivery is required within 30 days after the order is placed, with the shipment destined for the MA ARNG UTES 1 facility in Buzzards Bay, Massachusetts. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951 standards. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract also incorporates specific technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 4 days
View Details
New
DIBBS
NON-NSN ITEM
Solicitation # SPE3SE-26-Q-0452
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0452 for the procurement of two units of non-NSN item part number 7310GM5022323. This federal requirement is tracked under purchase request 7017931693. The solicitation was posted on August 31, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-26-Q-2343
This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for the procurement of one uninterruptible power supply, specifically Motorola Solutions part number DSGXT4-1000RT120. The item is designated as a critical application item with a twelve month extendable shelf life. Delivery is required within 60 days after order, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, covered defense information requirements, and specific DLA packaging and marking standards. Because the item involves sealed lead acid batteries, the contractor must provide MSDS/PSDS documentation and comply with hazardous material packaging and communication standards. Additionally, the contract prohibits the intentional addition of mercury except where functionally required for batteries or sensors.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details