Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, END

Active
SPE4A7-26-T-618HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five units of a PLATE, END with NSN 6605-00-633-4227 under solicitation SPE4A7-26-T-618H, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with no variance allowed, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is non-hazardous, it must be commercially packaged per ASTM D3951 unless otherwise dictated by DLA requirements; hazardous materials must meet FED-STD-313 and TQ requirement IP025. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The manufacturer must comply with CMMC Level 2 self-assessment and ensure physical identification per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Ozone-depleting substances are prohibited. The delivery address is DLA Distribution Depot Oklahoma at Tinker AFB, and the original required delivery date is August 11, 2027, with a need ship date of January 31, 2027.

General Info

Procure five PLATE, END units with strict packaging, quality, and delivery rules to Tinker AFB by January 31, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-618H Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
JESSICA GENTRY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,END
PLATE,END
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SEQUA CORP
KOLLSMAN DIV
USE OF OZONE DEPLETING SUBSTANCES:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ELBITAMERICA, INC. 89944 P/N 1287-197
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A7-26-T-618H
SECTION B
PR: 7017740781 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740781 0001 EA 5.000
NSN/MATERIAL:6605006334227
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:08/11/2027
SPE4A7-26-T-618H NSN/Part Number: 6605-00-633-4227 Quantity: 5 EA Purchase Request: 7017740781QTY: 5 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
DETECTOR, CARBON DIOXID
Solicitation # SPE2DS-26-T-310Q
The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, ANALOG TO DI
Solicitation # SPE8EN-26-T-2779
This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-311C
The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOX
Solicitation # SPE7M1-26-T-250G
This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
RETAINER, TUBE, TRACHEAL
Solicitation # SPE2DS-26-T-310Y
The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2808
This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
HARNESS, ORONASAL MASK
Solicitation # SPE2DS-26-T-310N
The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-311H
The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8E9-26-T-3353
This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2778
The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-2829
This contract, issued under solicitation SPE8EN-26-T-2829, specifies the procurement of six units of a computer subassembly identified by NSN 7050-01-565-3832, with a delivery requirement of 167 days from the award date and FOB origin terms. The item must be packaged in compliance with ASTM D3951, with all packaging and labeling strictly following MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements, which take precedence over any other standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contractor is required to comply with CMMC Level 2 self-assessment for cybersecurity and must handle Covered Defense Information according to RD002 policies. No technical data package is currently available from DLA Troop Support for this NSN, and requests for such data are not to be submitted. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 1, 2027, and an original required delivery date of May 4, 2027. The unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract solicitation SPE4A7-26-R-X998 is for one unit of CYLINDER, INNER SHOCK ABSORBER, BOOM STOWAGE with NSN 1680-00-672-8041, under a Total Small Business Set-Aside for NAICS code 333995, with a maximum estimated contract value of $349,999.99 and a delivery window of 365 days after award. The procurement is governed by a trade-off evaluation approach where past performance, particularly SPRS assessments, historical quality, and delivery schedule compliance, holds the highest weighting, followed by cost or price and other non-price factors. All supplies must comply with stringent packaging and marking standards including MIL-STD-129 for external labeling and barcoding, ASTM D3951 for packaging, and DLA’s RP001 packaging requirements. The inspection and acceptance process occurs at the origin, with the Government retaining final authority to accept or reject items based on ISO 9001:2015, MIL-STD-1916, and the DLA Master List of Technical and Quality Requirements. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and distribution is restricted to contractors with approved JCP certification, completed DLA export control training, and DLA access approval. Item Unique Identification is not required per customer request. The contract incorporates multiple FAR and DFARS clauses governing cybersecurity, including DFARS 252.204-7012 for safeguarding covered defense information and CMMC Level 2 certification requirements, as well as compliance with NIST SP 800-171 through clause 252.240-7997. The contractor must also adhere to provisions on combating trafficking, equal opportunity, labor rights, environmental protections including prohibitions on hexavalent chromium and toxic materials, and Buy American requirements under Alternate II. Payment must be submitted exclusively through WAWF, and performance is subject to FOB destination terms where the contractor bears transportation risk until delivery at the specified destination. The solicitation closes August 16, 2026, and must be submitted through DIBBS or email to Lamar Olivier, with no options, a five-year base period, and minimum and maximum annual order quantities of 10 and
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A7-26-T-617Y
The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-618E
This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336414
New
DIBBS
FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT
Solicitation # SPE4A7-26-R-X989
The contract is for the procurement of one FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT, identified by NSN 1440-01-073-2293 and part number 16S307-1, Revision K, with technical data tied to Lockheed Martin Corporation and Alek Industries Inc. The solicitation, issued under number SPE4A7-26-R-X989, is a total small business set-aside under NAICS code 336414, with a ceiling value of $349,999.99 and a delivery deadline of 230 days ADO to an unspecified destination under FOB DESTINATION terms. Performance is governed by stringent defense procurement standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for bare item labeling, preservation, and external container markings indicating “Product Verification Test Samples - Do Not Post to Stock” alongside contract and lot numbers. Technical data is subject to export controls under ITAR or EAR, restricting access to DLA contractors with approved JCP certification, completed export control training, and DLA authorization. Cybersecurity compliance is mandated at CMMC Level 2, and the contractor must adhere to DFARS and FAR requirements including safeguarding covered defense information, combating trafficking, equal opportunity, paid sick leave, and employment eligibility verification. The contract includes comprehensive quality and inspection protocols requiring acceptance at destination per FAR 52.246-2, with inspections governed by MIL-STD-1916 and quality assurance provisions. Invoicing is exclusively through the Wide Area WorkFlow (WAWF) system, with no alternative methods permitted, and payments are routed through designated DoDAACs. The evaluation process prioritizes past performance, especially supplier quality and delivery reliability, over cost, with a trade-off approach used to determine best value. Offerors must maintain current SAM registrations, submit UEI and CAGE codes, and represent their small business status accurately, with additional disclosures required if providing covered defense telecommunications equipment. Special contract requirements authorize DPAS priority ratings, mandate U.S.-flag vessels for ocean shipments unless waived, and impose strict labeling of hazardous and radioactive materials. Technical data submissions for alternative products must include traceability documentation, and any configuration changes require formal engineering change proposals. No formal list of attachments is provided, and specific pricing, point-of-contact, COR/COT
Guided Missile and Space Vehicle Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PLATE, TEMPETURE IND
Solicitation # SPE4A7-26-R-XA01
The contract is for a single unit of a temperature indicator plate, identified by NSN 1650-01-034-8563 and part number 240-180F, procured under solicitation SPE4A7-26-R-XA01 as a total small business set-aside. Delivery is due within 75 days after date of order, with FOB destination terms applying, and the contract uses a firm fixed price with zero variance permitted. Inspection and acceptance both occur at origin, governed by MIL-STD-1916 or ASQ H1331 sampling standards requiring zero nonconformances in the sample lot unless otherwise specified; unspecified attributes are treated as major. The contractor must comply with all DLA Master List of Technical and Quality Requirements, including RQ001 for tailored quality requirements, RQ009 for inspection at origin, RQ011 for removal of government identification from non-accepted items, RQ017 for physical marking, and RT001 for calibrated test equipment. Packaging must meet ASTM D3951 standards unless superseded by DLA requirements, and all items must be labeled and palletized per MIL-STD-129 and RP001, including mandatory markings such as “Product Verification Test Samples – Do Not Post to Stock,” contract number, and lot/item number. The item is classified as a critical application item and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. The contract incorporates numerous FAR and DFARS clauses, including those on small business representation, child labor, equal opportunity, termination for convenience, default, and prohibition on contracting with inverted domestic corporations, all of which contain deviations authorized under 2026-00038. Invoicing is mandatory through the Wide Area WorkFlow system, and the contractor must maintain compliance with traceability, obsolescence management, and hazardous materials labeling (29 CFR 1910.1200). Payment, delivery, and performance are tied to the DLA’s supply chain protocols, with quality oversight conducted by government inspection authorities and technical compliance governed by precedence of contract-specific requirements over general standards.

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-618L
The contract solicitation SPE4A7-26-T-618L is for the procurement of 3,250 units of a quick-release pin identified by NSN 5315-01-525-4843 and part number QRD3B1025Z, classified as a commercial item. The unit price is $3.25, resulting in a total contract value of $10,562.50, with delivery required 113 days after order placement, no later than December 16, 2026, and a need ship date of July 23, 2026. Deliveries are FOB origin with inspection and acceptance occurring at the destination, specifically at the DLA Distribution Albany facility in Albany, Georgia. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, prioritizing the DLA Master List of Technical and Quality Requirements over any conflicting standards. Palletization must adhere to RP001, and all items must be marked with the correct unit of issue and quantity per unit pack. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, with verification levels and AQLs strictly aligned to critical, major, and minor attributes. The item is designated as a critical application item and is subject to stringent documentation controls, including source approval and physical identification per RC001 and RQ017. The contract mandates full compliance with hazardous material handling requirements under 29 CFR 1910.1200 and DFARS 252.223-7001, requiring pre-award submission of safety data sheets and ongoing updates for any material changes. Electronic invoicing must be processed through WAWF, and the contractor must adhere to all applicable federal regulations including employment eligibility verification, combating trafficking in persons, sustainable products, cybersecurity safeguarding, and export control prohibitions. The contract includes clauses for small business representation, accelerated payments to small business subcontractors, whistleblower protections, and limitations on use of certain telecommunications equipment. All submissions must be made electronically through the DLA Internet Bid Board System by the August 13, 2026 deadline, and the government retains unlimited rights to data and technical information.
Other Fabricated Wire Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details