Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, MENDING

Active
SPE7L1-26-T-08N7Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one mending plate, identified by NSN 5340017255215 and part number 4730-010-563. The order is issued by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-08N7 with a required delivery date of September 3, 2026. Delivery is required within 20 days after order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination in Port Hueneme, California. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling following MIL-STD-129. Covered Defense Information regulations under RD002 also apply to this acquisition.

General Info

DoD procurement of one mending plate for delivery to Port Hueneme by 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

1150 STETHEM ROAD, PORT HUENEME, CA, 93043, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-08N7 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,MENDING
PLATE,MENDING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
ADVANCED TECHNOLOGY AND RESEARCH 7S553 P/N 4730-010-563
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018220589 0001 EA 1.000
NSN/MATERIAL:5340017255215
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE7L1-26-T-08N7
SECTION B
PR: 7018220589 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N42420
LCSRON 1 DET MPSF NBVC
BLDG 1392
1150 STETHEM ROAD
PORT HUENEME CA 93043
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N42420
LCSRON 1 DET MPSF NBVC
BLDG 1392
1150 STETHEM ROAD
PORT HUENEME CA 93043
US
M/F: (TCN) N4242062241519
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:09/03/2026
SPE7L1-26-T-08N7 NSN/Part Number: 5340-01-725-5215 Quantity: 1 EA Purchase Request: 7018220589QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Flat Washers (NSN 5310-00-995-1197)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNL
Solicitation # SPE4A6-26-T-26TH
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock stud assemblies, identified by NSN 5325-00-594-6267. The contract requires a rapid delivery turnaround of 5 days after the order is placed. Performance is centered in Oklahoma City, and the procurement falls under NAICS code 332510. Strict compliance is required regarding cybersecurity and data handling, specifically necessitating CMMC Level 2 certification through a C3PAO and adherence to Covered Defense Information standards. The technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contractor must follow specific DLA packaging requirements, source approval documentation, and configuration change management protocols for any engineering variances.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
FASTENER SNAP ASSEM
Solicitation # SPE4A6-26-T-26RJ
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 45 fastener snap assemblies under NSN 5325-01-191-3418. Each assembly must include one metallic eyelet (MS27980-8B), one cap snap fastener (MS27980-2B), one stud snap fastener (MS27980-7B), and one socket snap fastener (AN227-7B). The delivery requirement is set for 20 days after the order is placed. The contract is fully competitive and adheres to specific military and federal standards, incorporating DLA master lists for technical and quality requirements. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and specific physical item marking. While covered defense information may apply, item unique identification is not required by the service customer. Interested parties must respond by September 11, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE4A7-26-T-695J
Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
WHEEL, SOLID, METALLIC
Solicitation # SPE7LX-26-U-9815
Solicitation SPE7LX-26-U-9815 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate. The requirement is for the procurement of 56 metallic solid wheels, identified by NSN 5340010635825. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 8 units, and a minimum delivery order quantity of 14 units. Delivery is expected within 210 days after receipt of the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to several technical and regulatory standards, including CMMC Level 2 certification and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific attention to special packaging instruction AK10635825. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE7L5-26-T-5309
This contract, identified as SPE7L5-26-T-5309, is a solicitation for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111 and part number 16702313 from Fairbanks Morse, LLC. The order is managed by the Department of Defense Land Supplier Operations Engines, with delivery required within 105 days. The shipment is destined for Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of August 14, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by ISO 9001:2015 standards, and inspection and acceptance will occur at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Sampling for quality control must follow MIL-STD-1916 or ASQ H1331 guidelines.
LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, LOCK
Solicitation # SPE7L5-26-T-5310
This contract is for the procurement of 595 lock pins, identified by NSN 5315012977866 and part number 16101188 from Fairbanks Morse, LLC. The order is managed under purchase request 7015050966 with a delivery requirement of 41 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization requirements per RP001. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. The required delivery date is set for July 3, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-25XV
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
BUMPER
Solicitation # SPE7L1-26-T-10U2
Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement incorporates specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to AMS 5513 for metallic components. The required delivery date is February 22, 2027, with a need ship date of January 16, 2027, for delivery to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via the DIBBS system by September 21, 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-70B4
The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGL
Solicitation # SPE7L5-26-T-5100
LAND SUPPLIER OPNS ENGINES

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-716G
This contract is a solicitation for the procurement of 24 shims, identified by NSN 5365013138567 and part number 218808 from Woodward Inc. or General Electric Company. The order is issued by the Department of Defense under solicitation number SPE4A7-26-T-716G, with a required delivery date of February 2, 2027, and a delivery timeframe of 113 days after the order. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution Corpus Christi, Texas. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 standards for manufacturers. Quality assurance involves specific sampling methods per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332312
New
DIBBS
Manufacture and Supply of Leaf Spring Assemblies
Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
Supply of Nonmetallic Bumpers (NSN 5340-01-148-8935)
Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) for Valve Body
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334418
New
DIBBS
Supply of Bypass Valve Body Assembly
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
FITTING, BREECH
Solicitation # SPE7L1-26-Q-1634
This firm fixed price solicitation, issued by DLA Land and Maritime, is for the procurement of 94 units of the Breech, Bomb Ejector Rack (NSN 1095-00-450-8483). The item is designated as a critical gun part and a defense article subject to International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring manufacturers to be registered with the Directorate of Defense Trade Controls. Delivery for the primary item is required 796 days after delivery order, with inspection and acceptance occurring at the origin via DCMA QAR at the manufacturer's facility. The award will be based on best value, considering price, proposed delivery, and past performance, with a government first article testing cost of 9,886.00 dollars factored into the evaluation. The contractor must provide two first article exhibits: one assembled with finish and one machined but unfinished and unassembled. Additional requirements include CMMC Level 2 certification, adherence to ASTM D3951 and MIL-STD-129 for packaging and marking, and compliance with the DLA Master List of Technical and Quality Requirements. All payment processing must be conducted through the Wide Area WorkFlow system.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-05Q3
This solicitation from the Department of Defense Land Supply Chain is for the procurement of two access covers, identified by NSN 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed and is subject to full and open competition. It incorporates specific technical and quality requirements from the DLA Master List, including strict packaging standards and the prohibition of Class I ozone depleting chemicals. The agreement includes rigorous security and compliance mandates, specifically requiring adherence to Covered Defense Information and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All responses must be submitted by September 11, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332613
New
DIBBS
CONTRACTOR FIRST ARTICLE TEST
Solicitation # SPE7L1-26-Q-1635
Solicitation SPE7L1-26-Q-1635 is a firm fixed price request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 88,000 leaf spring assemblies, identified by NSN 2510-00-741-1110. The government is seeking the best value based on an evaluation of price, past performance, and offered delivery. Quotations are due by September 18, 2026, with a required need ship date of March 9, 2027. The contract includes a Product Verification Test requirement, necessitating the shipment of selected samples accompanied by material certifications, manufacturing drawings, and a signed DD Form 1222 for government evaluation. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK071110. Inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Additionally, the contractor must comply with cybersecurity standards under NIST SP 800-171 and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance is primarily centered in Texarkana, Texas, and is managed by Adam Howell.
Spring Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336350
New
DIBBS
BODY, VALVE, BYPASS
Solicitation # SPE7L1-26-T-09K8
Solicitation SPE7L1-26-T-09K8 is a fixed-price request for quotations issued by the DLA Land and Maritime agency for the procurement of two bypass valve body assemblies (NSN 2520-00-475-1278) used on shop vans. The procurement requires the contractor to perform first article testing on three units, with a delivery window of 333 days for the primary items and 15 days for the first article test. Inspection and acceptance are both conducted at the origin. The government mandates that manufacturers maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The contract includes stringent regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls for technical data. Offerors must adhere to the Buy American Act and the Berry Amendment, with specific disclosures required for non-domestic materials. Packaging must comply with MIL-STD-129 and specific hazardous material standards such as IP025 and 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and a price evaluation preference for certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
KNOB
Solicitation # SPE7L1-26-T-960S
This solicitation is for the procurement of 333 knobs under NSN 5355-01-073-7408 for the Department of Defense Land Supply Chain. The contract requires delivery within 70 days after receipt of order and is open for full and open competition. The items must be manufactured according to current military or consensus non-government part standards and must be entirely free of asbestos. Quality and technical compliance are governed by DLA master requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. The procurement is subject to regulations regarding covered defense information and specific verification levels for critical, major, and minor attributes.
Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-05J4
Solicitation SPE7L1-26-T-05J4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 242 O-rings (NSN 5331-01-338-7343). The requirement is under NAICS code 339991, with a need ship date of February 2, 2027, and an original required delivery date of March 1, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict quality and material standards, including a total prohibition of asbestos and Class I ozone-depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-P-4861. Contractors must maintain supply chain traceability documentation and adhere to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-264X
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L1-26-U-0642
Solicitation SPE7L1-26-U-0642 is a request for quotations issued by DLA Land and Maritime for the procurement of fluid filter elements, specifically NSN 2940004321761, type A/S32M-13. These critical application items are used on M911 transporter commercial heavy equipment and truck tractors. The requirement is for an estimated quantity of 1,128 units, with a contract maximum value of 350,000.00 dollars. This is a Women-Owned Small Business set-aside and may result in a unilateral simplified indefinite-delivery contract with a fixed-price structure. The delivery period is specified as 62 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and RP001 DLA packaging requirements, while labeling must adhere to MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act and the Berry Amendment, and quotes are due by September 11, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS