This Solicitation opportunity from Department Of Defense was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PLATE, METAL

Closed

SPE8E9-26-T-2179Federal

Submission Closed05/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E9-26-T-3766

Solicitation SPE8E9-26-T-3766 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 40 units of metal plates identified by NSN 9535000047342. This procurement is set aside for Women-Owned Small Businesses (WOSB) and falls under NAICS code 331491. The items must comply with ASTM B660-23 and the provided Technical Data Package. Delivery is required within 146 days, with a need ship date of February 15, 2027, and a final required delivery date of February 25, 2027. The shipping terms are FOB Origin, with the destination and acceptance point located at Tinker AFB, Oklahoma. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSDL), and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Required deliverables include Metal Certification and Certificate of Quality Compliance documentation. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Invoicing and payment processing must be conducted through the Wide Area WorkFlow (WAWF) system. The solicitation incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Quotes must be submitted electronically via DIBBS by the deadline of September 21, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # N0010426QFE84

This solicitation, issued by Navsup Weapon Systems Support Mech, is for the procurement of high-criticality metal bars, specifically nickel-copper alloy and copper-nickel alloy forgings. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific MIL-STD certifications. The contract emphasizes rigorous material traceability, ultrasonic inspection, and the prohibition of mercury-containing compounds to prevent system failures that could lead to loss of life or vessel loss. Key requirements include the submission of certification data 20 days prior to delivery and a final delivery window of 365 days. The procurement is a combined solicitation for multiple related items, allowing for awards at the CLIN level to multiple vendors. Offerors must provide a certificate of compliance and maintain a documented quality system available for government audit. The response deadline for this solicitation is September 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Non-Metallic Protective Sheets (NSN 9390-01-738-3217)

Defense Logistics Agency

POSTED

DEADLINE

Copper Nickel Alloy Tubing Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Special Shaped Seal Supplier

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M2-26-T-6809

Solicitation SPE7M2-26-T-6809 is a fixed-price request for quotations issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of 4,000 feet of electrical power cable, identified by NSN 6145012027751. This critical application item must comply with MIL-DTL-24643/43G and MIL-DTL-24643D specifications. The material is required in continuous lengths of 1,000 feet per reel. Delivery is set for a need ship date of November 21, 2027, with a final required delivery date of January 5, 2028, shipping FOB Destination to the New Cumberland facility in Pennsylvania. The contract mandates strict adherence to MIL-DTL-12000 for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Quality and technical requirements are governed by the DLA Master List, and the item is subject to Qualified Products List or Qualified Manufacturers List applicability. Key restrictions include a prohibition on the intentional addition of mercury and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DIBBS portal by September 21, 2026, and payment will be processed through the Wide Area WorkFlow system.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-319X

This fixed-price solicitation, issued by the Department of Defense through DLA Land and Maritime, is for the procurement of 4,000 feet of radio frequency cable (NSN 6145-01-499-0467). Designated as a critical application item, the material must be provided in continuous lengths of 500 feet per spool. The procurement is a small business set-aside and requires adherence to technical drawing TDP Rev A Gen 1, Basic Drawing NR 53711 6262065, Revision L. Delivery is required within 144 days after the order, with a need ship date of February 2, 2027, and a final required delivery date of March 27, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict compliance with several military standards, including MIL-DTL-12000 for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Palletization must follow RP001 DLA packaging requirements. Environmental and safety restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone-depleting chemicals. The item is a restricted source item requiring engineering source approval by the government design control activity. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and all quotes must be submitted electronically via the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3751

This contract is for the procurement of 15 aluminum alloy metal sheets, specifically Alloy 7075 T6, with dimensions of 0.190 inches thick, 48 inches wide, and 144 inches long. The materials must strictly adhere to the specified dimensions, as test coupons are not permitted. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for the award. A Certificate of Quality Compliance is required for every shipment and must be provided to both the customer and the DLA Troop Support Contracting Officer. Strict marking and packaging requirements apply, including continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Markings must be legible, waterproof, and applied via stamping or stenciling. The product must be delivered FOB Origin to DLA Distribution Warner Robins with a delivery window of 160 days. Compliance with various technical standards, including ASTM B660 and B666, is mandatory to avoid rejection of the end product.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3749

Contract SPE8E9-26-T-3749 is a total small business set-aside solicitation issued by the Department of Defense DLA Troop Support for the procurement of aluminum alloy metal sheets. The material is specified as 0.125 inches thick, 48 inches wide, and 144 inches long, conforming to Alloy 5052 Temper H32 and various technical standards including ASTM B209, ASTM B660, and SAE AMS4016N. The total quantity requested is 550 sheets, divided across three delivery locations: New Cumberland, PA (300 sheets), Jacksonville, FL (100 sheets), and Tracy, CA (150 sheets). The required delivery date for all items is September 8, 2026, with a delivery lead time of 43 days. This is a critical application item requiring strict adherence to dimensions, and test coupons are not permitted. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). Mandatory requirements include the provision of a Certificate of Quality Compliance (Mill-Material Certification) and specific continuous identification markings on each unit, such as the contract delivery order number, NSN, and manufacturer details. Packaging and preservation must comply with MIL-STD-129, MIL-STD-2073-1E, and ASTM B660. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3748

This contract is for the procurement of aluminum alloy metal sheets, specifically 0.125 inches thick, 48 inches wide, and 144 inches long, with a total quantity of 35 sheets across two line items. The material must be Alloy 7075 Temper T6 and conform exactly to the specified dimensions, as test coupons are not permitted. A Certificate of Quality Compliance is required for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates strict marking and packaging requirements, including continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Packaging and preservation must adhere to ASTM B660 and B666 standards, with palletization following DLA packaging requirements. Delivery is set for 50 days after the order, with shipments destined for DLA Distribution Depot Hill and the DDSP New Cumberland Facility. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E426T2212

The Department of Defense, through DLA Troop Support, is seeking quotes for the procurement of four metal plates under NSN 9535002322312. This requirement is issued as a combined solicitation under RFQ SPE8E426T2212 and is specifically set aside for SBA Certified Women-Owned Small Businesses. The items are to be delivered to DLA Distribution San Joaquin within 163 days after the order is received. Interested parties must submit their quotes electronically by the deadline of September 18, 2026. The procurement falls under NAICS code 331491, and all technical drawings or military specifications must be retrieved electronically via the provided solicitation links. All responsible sources are encouraged to submit timely electronic quotes for consideration.

POSTED

DEADLINE

Titanium Metal Plate Supplier

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

9 days ago

DEADLINE

in 2 days

AI Contract Overview

A 2.5-inch thick aluminum alloy plate measuring 48 inches wide and 144 inches long, weighing 1745.2 pounds per piece, is being procured under NSN 9535-01-394-0438 and part number ALY 7050 TMPR T7451, conforming to AMS 4050K and ASTM standards B666/B666M-20 and B660-23. The material is solution-treated to T-7451 temper, produced via rolling, and must be supplied in whole-foot lengths only, with no test coupons permitted. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy, temper, manufacturer’s name, heat and lot number, and exact dimensions using stencil or stamping methods that are legible, waterproof, and noncontaminating. Adhesive labels are required for small bars, tubes, or shapes under 0.25 inches in nominal diameter. The plates must be packaged in strict accordance with MIL-STD-2073-1E and ASTM B660 Level A, marked per MIL-STD-129, and palletized per DLA packaging requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and noncompliance constitutes an unauthorized substitution that may incur criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The requirement applies to a quantity of seven pieces, delivered FOB origin to Tinker AFB, Oklahoma, with a delivery deadline of 164 days from solicitation, and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements.

General Info

Seven 2.5-inch thick aluminum alloy plates, 48x144 inches, T7451 temper, NSN 9535-01-394-0438, FOB origin to Tinker AFB, 164-day deadline.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

Contract Value

$55,044.01

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Awardee

PIERCE ALUMINUM COMPANY, INC.View Profile

Award Issued Date

05/06/2026, 12:00:00 AM UTC

Documents

(1)

SPE8E9-26-T-2179.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 20

Combined Synopsis

Type ChangedMay 1

Combined Synopsis → Solicitation

Response DeadlineMay 6

Deadline has passed

Submission Closed

05/06/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressUSA

Contacts

Matthew Kruc

contact@example.gov

+1 (555) 000-0000

Full Description

PLATE,METAL
METAL PLATE
ALUMINUM ALLOY 2.50 IN THK 48 IN WIDE 144 IN LG 1745.2 LB/PM
Technical Characteristics NSN 9535-01-394-0438 ,, ,,,, .FABRICATION METHOD,, ROLLED .WIDTH,, 48.000 INCHES NOMINAL ,, ,, .LENGTH,, 12.000 FEET NOMINAL ,, ,, .CROSS-SECTIONAL THICKNESS,, 2.5000 INCHES NOMINAL ,, ,, .BASIC SHAPE STYLE,, SOLID ,, ,, .HEAT TREATMENT,, T-7451 SOLUTION TREATED ,, ,, .MATERIAL,, ALUMINUM ALLOY, AMS 4050, ALLOY 7050 ,, ,, .NONDEFINITIVE SPEC/STD DATA,, 7050 ALLOY AND T7451 TEMPER ,, RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
SPE8E9-26-T-2179
SECTION B
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
IAW BASIC NON GOVT STD SAE AMS4050K REVISION NR K DTD 04/01/2021
SPE8E9-26-T-2179
SECTION B
PART PIECE NUMBER: ALY 7050 TMPR T7451
IAW REFERENCE DRAWING NR 14153 01735
REVISION NR A DTD 05/09/2013
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ASTM B666/B666M-20
REVISION NR M DTD 11/01/2020
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ASTM B660-23
REVISION NR DTD 11/01/2023
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 CDRL-METALSCERT-26033
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016375862 0001 PM 7.000
NSN/MATERIAL:9535013940438
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:A
INTRMDTE CONT:10 INTRMDTE CONT QTY:004
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
WHEN PREP FOR DELIVERY REQUIREMENTS SPECIFY CODE ZZ, PACKAGING SHALL BE IN ACCORDANCE WITH LEVEL A REQUIREMENTS OF ASTM B660 AND DISC DRAWING NUMBER 01735 PRESERVATION ZZ = IAW ASTM B660 MARKING Z = IAW ASTM B666 AND ADDITIONAL REQUIREMENTS STATED IN THE PURCHASE ORDER TEXT(POT).
SPE8E9-26-T-2179
SECTION B
PR: 7016375862 PRLI: 0001 CONT’D
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:10/13/2026 Original Required Delivery Date:08/01/2026
SPE8E9-26-T-2179 NSN/Part Number: 9535-01-394-0438 Quantity: 7 PM Purchase Request: 7016375862QTY: 7 Delivery: 164 days ADO