Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLATE, METAL

Active
SPE8E9-26-T-3206Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a metal plate made of aluminum alclad with a 0.0075 inch cladding thickness on both sides, measuring 0.500 inches thick, 24 inches wide, and 72 inches long, weighing approximately 87.26 pounds per unit. The material must conform to SAE AMS4049N Revision N, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper of T651. Every shipment must include a Certificate of Quality Compliance, and the product must be marked on each unit with mandatory identifiers including the DLA contract delivery order number, NSN, specification number and revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stenciling or stamping, excluding die stamping, and must not contaminate the material. All plates must be supplied in whole-foot lengths only. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods per ASTM B660 and labeling per MIL-STD-129, including dual-unit markings for shipments with dual units of measure. The delivery is FOB origin, with inspection and acceptance at destination, and must be completed within 167 days, with an original required delivery date of February 25, 2027. The NSN is 9535-00-232-7551, quantity is 11 pounds per meter, and the purchase request is 7017585638. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and non-compliance constitutes an unauthorized substitution exposing the supplier to criminal and civil penalties. Quality conformance inspections and source inspection requirements are waived for QSLD-compliant suppliers. The solicitation is a total small business set-aside under NAICS code 331491, with a response deadline of August 3, 2026.

General Info

Aluminum alclad plate, 0.500 inch thick, 24x72 inches, T651 temper, SAE AMS4049N compliant, QSLD suppliers only, delivery by Feb 25, 2027.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(1)

SPE8E9-26-T-3206.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,METAL
METAL PLATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALUMINUM ALCLAD 0.0075 IN CLADDING THICKNESS BOTH SIDES
0.500 IN THK 24 IN W 72 IN LG
87.26 LB/PM (REF)
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
SPE8E9-26-T-3206
SECTION B
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AMS4049N REVISION NR N DTD 08/01/2022 PART PIECE NUMBER: ALCLAD 7075, TMPR T651
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20
SPE8E9-26-T-3206
SECTION B
REVISION NR M DTD 11/01/2020
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585638 0001 PM 11.000
NSN/MATERIAL:9535002327551
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
SPE8E9-26-T-3206
SECTION B
PR: 7017585638 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:01/18/2027 Original Required Delivery Date:02/25/2027
SPE8E9-26-T-3206 NSN/Part Number: 9535-00-232-7551 Quantity: 11 PM Purchase Request: 7017585638QTY: 11 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331491
New
DIBBS
SHEET, METALThis contract specifies the procurement of aluminum alloy sheet metal with precise technical and quality requirements, including a thickness of 0.063 inches, width of 48 inches, length of 96 inches, and a weight of approximately 28.16 pounds per sheet. The material must conform to alloy 5052 in temper H32 and meet specifications SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23, with full compliance to the referenced Technical Data Package revisions. All sheets must be supplied in whole-foot lengths only, with no test coupons permitted, and must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. A Certificate of Quality Compliance with mill materials certification is mandatory for every shipment and must be submitted to both the customer and the DLA Troop Support Contracting Officer. Markings must be applied via stamping or stenciling, using waterproof, non-contaminating fluids, and must remain legible under normal handling; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches in nominal OD. Compliance with MIL-STD-129 and MIL-STD-2073-1E packaging standards is required, including Level A preservation per ASTM B660 and special marking instructions where applicable. The Qualified Suppliers List for Distributors (QSLD) is strictly enforced, and only suppliers listed on the QSLD are eligible to respond; any deviation must be explicitly noted and may result in rejection or criminal penalties for unauthorized substitution. Delivery is FOB origin, with no quantity variance allowed, inspection and acceptance occurring at destination, within 17 days of order placement, to the designated DLA distribution facility in New Cumberland, PA. The original required delivery date is December 7, 2026, with a need ship date of August 21, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALThe contract specifies the procurement of aluminum alloy metal plates measuring 0.375 inches thick, 36 inches wide, and 96 inches long, with a reference weight of 126.96 pounds per piece, manufactured to SAE AMS4027P Revision P and ASTM B666/B666M-20 and B660-23 standards, with temper T651. All material must be supplied in whole-foot lengths and strictly conform to the exact dimensions specified, with no test coupons permitted. Each plate must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and type, manufacturer’s name, heat and lot number, and dimensions, using stamping or stenciling methods that are legible, waterproof, stable, and non-contaminating. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal OD. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust corner and edge protection, full top and bottom coverage with fiberboard or better, and marking per MIL-STD-129 with special preservation methods per ASTM B660 and B666. This contract is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support, and any quotation not based on an approved QSLD supplier must explicitly declare a deviation. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may trigger criminal penalties. Government inspection requirements are waived for QSLD-compliant suppliers, including COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006, except for Foreign Military Sales. The NSN 9535-00-495-7813 is to be delivered in 33 pieces (PM), FOB Origin, within 55 days, with a required delivery date of November 15, 2026. Inspection and acceptance occur at the destination facility in Tracy, California, with shipping addressed to DLA District San Joaquin. The unit price is $33.00 per piece, and the total contract
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALThe contract specifies the procurement of aluminum alloy high magnesium metal plates measuring 0.375 inches thick, 60.00 inches wide, and 240.00 inches long, with a reference weight of 518.40 pounds per unit. The material must conform to ASTM B928/B928M-15 (R 2023), referenced drawing 14153 01735 Revision A, and quality assurance procedures outlined in QAP 13873, with full compliance to MIL-STD-129R for marking and packaging. Supplier eligibility is restricted to those listed on the Qualified Suppliers List for Distributors (QSLD), as mandated by DLA Troop Support, and quotations from non-approved distributors are considered deviations and may result in rejection. Every shipment must include a Certificate of Quality Compliance with mill certification, and continuous identification markings are required on each unit, including contract number, NSN, specification, alloy, grade, temper, manufacturer’s name, heat and lot number, and exact dimensions. Material must be supplied in whole-foot lengths only, with permissible marking methods limited to stamping or stenciling using non-contaminating, waterproof, and durable fluids. Packaging must comply with MIL-STD-2073-1E and ASTM B660 for preservation and marking, with special requirements for ZZ-coded packaging. The contract is a total small business set-aside under NAICS 331491, with 11 units required, delivered FOB origin to the DLA New Cumberland facility in Pennsylvania. Delivery is due within 167 days of award, with the original required delivery date set for September 10, 2026, and a need ship date of January 18, 2027. Inspection and acceptance occur at destination, with zero variance permitted in quantity.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
PUGET SOUND

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
PUGET SOUND

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
Federal
95--PLATE,METAL
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METAL
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
Federal
95--SHEET,METAL
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
CABLE, POWER, ELECTRICALThe contract specifies the procurement of 800-foot reels of electrical power cable with a nominal length per specification, identified by NSN 6145-01-202-0676 and part numbers M24643/16-10UN and LSTSGU-200, manufactured in strict compliance with MIL-DTL-24643/16G and MIL-DTL-24643D Revision D dated November 27, 2023. The cable must be furnished in continuous length as dictated by advice code 2N, and multiple unit packs are unacceptable. It is classified as a critical application item with strict technical and quality controls governed by the DLA Master List of Technical and Quality Requirements, and configuration change management procedures apply. Mercury and mercury compounds are prohibited in materials and components unless used in functional applications such as batteries, lamps, sensors, or weapon systems specified by NAVSEA, and any portable devices containing mercury must have two layers of containment as required by NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking per MIL-STD-129 and pack code U. The contract requires delivery within five days FOB origin with a quantity variance of plus ten percent and zero percent minus, with inspection and acceptance occurring at the destination. Three separate CLINs total 360 feet of cable at $120 per foot, with all shipments destined to US Naval Base Sasebo, Japan. The requirement is under a total small business set-aside, with the solicitation issued by the Department of Defense’s Maritime Supply Chain ESOC, and the original delivery date set for July 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
CABLE, SPECIAL PURPOThe contract pertains to a special-purpose cable with a nominal length of 1500 feet per reel, procured under solicitation SPE7M0-26-T-016M for a quantity of 100 feet, to be delivered within five days FOB destination. The cable must comply with technical specifications referenced in MIL-DTL-24643/13F and MIL-DTL-24643D, and all requirements outlined in the DLA Master List of Technical and Quality Requirements are incorporated by reference. Mercury or mercury-containing compounds are strictly prohibited in the cable or its components, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The material must be provided in continuous length due to advice code 28, eliminating the acceptability of multiple unit packs. Packaging and preservation must conform to MIL-STD-2073-1E, MIL-DTL-12000, and DLA packaging mandates, with marking adhering to MIL-STD-129 and palletization following RP001 guidelines. Manufacturer part numbers listed on the Qualified Products List at the time of award are acceptable. Delivery is directed to Naval Beach Unit Seven in Sasebo, Japan, with inspection and acceptance occurring at the destination. The contract allows for a ten percent positive quantity variance and zero percent negative variance. All procurements are subject to full and open competition, and the item is designated as a critical application.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METALA 0.750 inch thick brass naval plate measuring 48 inches wide by 96 inches long, weighing approximately 1052 pounds per unit, is being procured under solicitation SPE7M0-26-T-014F for delivery to Pearl Harbor Naval Shipyard. The material must conform strictly to the specified dimensions and physical properties, with no test coupons permitted, and must be supplied in whole-foot lengths only. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible to bid, and any deviation must be explicitly stated. Non-compliant products, even if manufactured to specification, will be deemed unauthorized substitutions with potential criminal penalties. A Certificate of Quality Compliance, including mill-material certification, must accompany each shipment and be forwarded to the contracting officer. Continuous identification markings are required on every unit, including contract number, NSN, specification revision, alloy, grade, temper, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, waterproof, non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including robust edge and corner protection, full board coverage, and compliance with MIL-STD-129 for marking. The material must meet technical requirements referenced in the DLA Master List of Technical and Quality Requirements, including MIL-C-3993C, QQ-B-639C, and SAE AMS-STD-185A. Delivery is FOB origin with a strict five-day window, zero tolerance for quantity variance, and destination inspection and acceptance. The contract incorporates technical and quality specifications referenced through R and I numbers, and government inspection requirements are waived under the QSL program except for FMS cases. The required delivery date is July 22, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
Federal
61--CABLE,POWER,ELECTRICAL
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract is for the procurement of 13 shipping units of clear acrylic plastic sheeting measuring 60 inches long by 36 inches wide and 0.750 inches thick, identified by NSN 9330-00-483-3433. The product must meet the technical specifications of MIL-PRF-5425E Revision E dated August 22, 2019, and be sourced from a manufacturer already approved on the Qualified Products List at the time of contract award. The sheeting is classified as a critical application item and must comply with all DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specific permitted uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 167 days of contract award, with an original delivery date of December 3, 2026, and a needed ship date of January 18, 2027. The quantity is fixed with zero variance allowed. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, avoiding plastic as wrapping, cushioning, or dunnage whenever possible. Marking shall conform to MIL-STD-129 with no special marking code applied. All shipments must be palletized in accordance with DLA standards and sent to the designated delivery address in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination. The contract is governed under solicitation SPE8E9-26-T-3199, with a response deadline of August 3, 2026, and is issued under NAICS code 326113. Point of contact for inquiries is Matthew Kruc, DLA.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROSTATThis contract specifies the procurement of an electrostatic air filter with NSN 4460013113732 and part number 441076-001, supplied by AIR SYSTEMS COMPONENTS INC, under solicitation SPE8E9-26-T-3219. Six units are required at a unit price of $6.00, with total contract value of $36.00, delivered FOB origin within 167 days from the contract date. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking applicable. Packaging must adhere to DLA’s procurement guidelines and be palletized per RP001, with shipments directed to DLA Distribution Jacksonville at the specified address. The filter is designated as a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for authorized exceptions such as functional mercury in batteries, fluorescent lamps, sensors, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 333413, with responses due by August 3, 2026, and quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RQ and RD identifiers. Inspection and acceptance occur at the destination, with zero variance permitted in quantity, and transportation protocols follow DLAD Proc Notes C19 and C20.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334610
New
DIBBS
CARTRIDGE, TONERThis contract is for the procurement of toner cartridges identified by NSN 7045-01-643-9438 and part number 70C0HCG, supplied by Lexmark Intl Inc Federal Sales Division, under solicitation SPE8E9-26-T-3236. A total of 93 units are required at a unit price of $93.00, for a total contract value of $8,649.00, with delivery due 31 days after award, no later than December 20, 2026. All items must be delivered FOB origin, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container codes, and marking per MIL-STD-129 with no special marking required. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The contract incorporates DLA's Master List of Technical and Quality Requirements, with all referenced technical standards being applicable unless otherwise modified by solicitation amendments. Mercury or mercury-containing compounds are strictly prohibited in the toner cartridges or their components, except for functional uses in batteries, fluorescent lamps, sensors, or specialized instruments as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier. The contract also notes that no approved technical data package is currently available from DLA Troop Support for this NSN, and suppliers are instructed not to request one. Unit of issue is EA, consistent with DoD standards, and the item falls under NAICS code 334610. The contract is subject to Covered Defense Information requirements, and all submissions must adhere to federal procurement protocols through the DLA eProcurement system.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEETThe contract calls for the procurement of plastic sheets made of cellulose acetate, compliant with specification L-P-504, Type 1, characterized by a clear, high polish finish, with nominal dimensions of 20.000 inches in width, 0.060 inches in thickness, and 50.000 inches in length. Each sheet must be packaged in containers marked with the instruction “STORE FLAT KEEP COOL AND DRY” on at least one side and wherever practicable on two opposite sides. The material is identified by NSN 9330-00-202-3642 and is being procured under solicitation SPE8E9-26-T-3198 for a total quantity of 111 sheets, with a purchase request number of 7017585375 and a delivery deadline of 84 days after order. Packaging and labeling requirements adhere strictly to government standards, including the mandatory removal of any government identification from non-accepted supplies. All sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The manufacturer may elect either attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance requires zero non-conformances. The product must also comply with MIL-STD-130N for identification marking of U.S. military property. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 326113, issued by the Department of Defense under the Construction & Equipment MRO SVC I office, with performance location at Robins AFB, Georgia, and primary point of contact Matthew Kruc.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATIOHamilton Sundstrand Corporation, identified by CAGE code 99167, is contracted to supply identification plates with part number 745184-7 under solicitation SPE8E9-26-T-3235, with a total quantity of 64 units at a unit price of $64.00, resulting in a total contract value of $4,096.00. The item is designated by NSN 9905-01-672-4912 and must be delivered FOB origin within 167 days of contract award, with the original required delivery date set for March 22, 2027, and a needed ship date of January 18, 2027. Inspection and acceptance both occur at the destination, and no quantity variance is permitted. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. All packaging must also meet the Unit of Issue and Quantity per Unit Pack as specified in the contract. Delivery is directed to DLA Distribution Depot Hill at Hill AFB, Utah, via the freight shipping address provided, with transportation governed by DLAD Proc Notes C19 and C20. The contract references multiple technical and quality control codes, including RD003 regarding Covered Defense Information, and requires documentation for source approval per RC001. The supplier must also remove government identification from non-accepted supplies per RQ011. All applicable requirements are controlled by the version of the DLA Master List in effect on the solicitation issue date.
Sign Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER ELEMENT, AIR CONThis contract is for the procurement of eight air conditioning filter elements with NSN 4130012053774, issued under solicitation SPE8E9-26-T-3213 by the Department of Defense through DLA Troop Support. The supplier must deliver the items FOB origin with no variance in quantity, and inspection and acceptance will occur at the destination. The delivery timeline requires shipment no later than January 18, 2027, with an original required delivery date of November 14, 2026, and a total contract value of $64.00 at $8.00 per unit. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods and unit container codes, and all marking must follow MIL-STD-129K, with MIL-L-61002 requirements waived. Plastics are to be avoided in wrapping, cushioning, or dunnage where possible. The item is subject to strict restrictions on mercury and mercury-containing compounds, which are prohibited unless functionally necessary in specific applications like batteries or instruments, and even then must have dual containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced electronically, and the contract includes controlled information provisions. All shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are detailed in DLAD procedural notes.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BINDER, LOADThis contract issued by the Defense Logistics Agency under solicitation SPE8E9-26-T-3214 requires the procurement of 508 units of a binder, load item identified by NSN 3990-01-479-0538 and part number 12421708, with a unit price of $508.00 and a total contract value of $258,064.00. Delivery must be completed within 221 days of award, with FOB origin terms, inspection and acceptance occurring at destination, and no quantity variance allowed. The item must be packaged per ASTM D3951, with all labeling and marking strictly following MIL-STD-129, and palletization in compliance with DLA packaging requirements. Technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements take precedence over any general packaging standards. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998, with the primary point of contact being Matthew Kruc at DLA. The item is designated as a critical application and potentially involves covered defense information. The forging process is specified for manufacturing, and specific approved sources include BAE Systems, W.H. Smith Hardware, AMZ Alabama, Buffers USA, and The Crosby Group. Ship date is March 13, 2027, with original delivery required by April 22, 2027. All shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLA transportation protocol C19 for freight and C20 for first destination.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract specifies the procurement of a tube axial fan with NSN 4140011636009 and part number 033037000 from ROTRON INCORPORATED, for a quantity of nine units, under solicitation SPE8E9-26-T-3215. Delivery is required within 215 days from the contract award, FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special codes, and palletization as specified. The item is subject to critical application standards and covered defense information protocols. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses like batteries, fluorescent lamps, or specialized instruments, and where allowed, must include a secondary containment barrier in accordance with NAVSEA 5100-003D. Bare items must be marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Traceability to NAVAIR aircraft launch and recovery equipment standards applies, and all materials must conform to the DLA Master List of Technical and Quality Requirements referenced in the contract. The unit of issue is each, priced per unit, with total value derived from the fixed quantity.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details