Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLATE, METAL

Active
SPE8E9-26-Q-0606Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This procurement specifies the supply of carbon steel structural hot-rolled plate measuring 0.750 inches thick, 48 inches wide, and 96 inches long, weighing 980.12 pounds per linear foot, under NSN 9515-00-075-6918 and contract SPE8E9-26-Q-0606. All material must conform strictly to ASTM A36/A36M-19, ASTM A6/A6M-24B, and SAE AMS2807C standards, with no test coupons permitted and exact dimensional compliance required. Each unit must be continuously marked with the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using legible, waterproof stamping or stenciling that does not contaminate the material; adhesive labels are required for small-diameter bars and tubes under 0.250 inches nominal OD. Material must be supplied in whole-foot lengths only and packaged in accordance with MIL-STD-2073-1E and RP001 DLA packaging requirements, with preservation and marking following ASTM A700 and MIL-STD-129 guidelines. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any substitution by non-listed entities constitutes a material deviation subject to rejection and potential criminal penalties. A Certificate of Quality Compliance (Mill-Material Certification) must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract employs a firm-fixed-price structure with zero tolerance for quantity variance, destination inspection and acceptance, and origin FOB terms, with delivery required within 60 days after order placement. Packaging must reflect dual-unit markings when applicable and use designated special codes Z and ZZ per ASTM A700. All documentation, including CDRL-METALSCERT, must align with the current DLA Master List of Technical and Quality Requirements, and references to internal quality inspections are waived for QSL-compliant suppliers. The item is classified as a critical application, and failure to meet any requirement voids acceptance.

General Info

Carbon steel plate per ASTM A36, NSN 9515-00-075-6918, QSLD-only suppliers, FOB, 60-day delivery, strict marking and certification required.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E9-26-Q-0606 Metal Plate Procurement

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Luis Marrero
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE, METAL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STEEL, CARBON, STRUCTUAL HOT ROLLED 0.750 IN THK, 48 IN W, 96 IN LG 980.12 LB/PM (REF)
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
No sheets will be accepted unless they conform to exact dimensions per the item description: Test coupons are not allowed.
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
SPE8E9-26-Q-0606
SECTION B
SUPPLY/SERVICE: 9515-00-075-6918 CONT'D
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD ASTM A36/A36M-19 REVISION NR DTD 07/01/2019 PART PIECE NUMBER: ASTM A36, HOT ROLLED
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2807C REVISION NR C DTD 05/01/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASTM A6/A6M-24B REVISION NR 24 DTD 08/15/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E9-26-Q-0606
SECTION B
SUPPLY/SERVICE: 9515-00-075-6918 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9515-00-075-6918 3.000 PM $ ______________ $ ______________ PLATE,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 60 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:00 OPI:A PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. MARKING Z= MARKING SPECIFICATION(S) LISTED IN CONTRACT AND ADDITIONAL REQUIREMENTS IN THE PURCHASE ORDER TEXT(POT).
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
SPE8E9-26-Q-0606
SECTION B
SUPPLY/SERVICE: 9515-00-075-6918 CONT'D
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017422444 0001 N/A N/A N/A 10/24/2026

SPE8E9-26-Q-0606 NSN/Part Number: 9515-00-075-6918 Quantity: 3 PM Purchase Request: 7017422444QTY: 3 Delivery: 60 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331221
New
DIBBS
Forging and Raw Material SupplyThe contract entails the supply of forged blanks or raw material stock specifically engineered for machining into knurled nuts, with strict requirements for metallurgical compliance and full traceability throughout the production process. All materials must meet defined technical specifications to ensure suitability for final machining and performance in demanding applications, with documentation ensuring material origin, heat treatment, and processing history are verifiable at every stage. The work is classified under NAICS code 331221, indicating a focus on forging and stamping operations, and is structured as a subcontract under the Defense Logistics Agency, an agency of the Department of Defense, reflecting the critical nature of the components for defense systems. The contract was posted on July 20, 2026, and while the specific place of performance and point of contact are not detailed, the procurement is managed through the Defense Logistics Agency’s systems under the contract identifier SPE4A626PY375. The absence of a stated set-aside type suggests the opportunity is open to all eligible suppliers without preferential classification. Full compliance with quality standards, material certification, and traceability protocols will be mandatory, as the end-use components are integral to defense applications where failure is not an option. The supplier is expected to deliver consistent, high-integrity raw materials that enable reliable, precision machining into standardized knurled nuts for military use.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 331221
New
DIBBS
Carbon Steel Structural Plate ManufacturingThe contract calls for the manufacture and supply of carbon steel hot-rolled structural plate conforming to ASTM A36/A36M-19, ASTM A6/A6M-24B, and SAE AMS2807C specifications, ensuring compliance with rigorous mechanical, chemical, and dimensional standards. All materials must meet strict traceability requirements, including full documentation of heat treatment, testing results, and origin, to guarantee material integrity and quality control throughout the production process. The product is intended for structural applications requiring high strength and reliability, with adherence to approved testing protocols and certification procedures as mandated by the referenced standards. The opportunity is structured as a subcontract under the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I office, with a solicitation posted on July 20, 2026, and a response deadline of July 27, 2026. The NAICS code 331221 identifies the classification as Steel Works, Blast Furnaces, and Rolling and Finishing Mills, indicating the specific industrial scope expected of the supplier. Performance location and point of contact details are not provided, but all deliveries must comply with Defense Logistics Agency procurement protocols, and proposals must be submitted through the DIBBS platform via the provided UI link.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
Supply of Metal Strip (NSN 9515016274079)The contract requires the manufacture and delivery of 11 units of precision metal strip with part number 901-032-755-117, classified as a Critical Safety Item for defense aviation applications. Each unit must fully comply with military specifications and adhere to Department of Defense traceability standards to ensure authenticity, quality, and safety throughout the supply chain. The item is identified by NSN 9515016274079 and falls under the NAICS code 331221, indicating its classification within the rolled metal product manufacturing sector. This is a subcontract awarded under the Defense Logistics Agency, part of the Department of Defense, and is tied to the contract vehicle SPE4AX18D9433 with delivery referenced under SPE4A226F6801. Despite being posted in 2026, the contract reflects an active procurement initiative with mandatory adherence to defense-grade requirements, and performance is expected to meet the stringent conditions inherent to critical aerospace components.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 331221
New
DIBBS
Metal Sheet Manufacturing and SupplyThe contract calls for the manufacture and delivery of 200 metal sheets adhering strictly to military specifications, ensuring full compliance with form, fit, function, packaging, labeling, and traceability requirements. All items must meet rigorous quality and documentation standards to support defense logistics and operational readiness. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the Small Business Administration. The North American Industry Classification System code 331221 identifies the work within the aluminum rolling and other aluminum product manufacturing category. The awarding agency is the Department of Defense under the Construction & Equipment MRO SVC I office, and responses must be submitted by the deadline of July 27, 2026. The contract was posted on July 20, 2026, and all performance obligations, including delivery and compliance, are tied to military supply chain protocols.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
Titanium Alloy Metal Sheet SupplyThe contract calls for the supply of titanium alloy metal sheets meeting military specifications AMS-T-9046 and UNS R56400, requiring full material traceability from origin to final delivery. All shipments must be packaged in strict compliance with defense standards to ensure protection and integrity throughout transit. The material is destined for DLA Distribution Warner Robins, indicating its direct use within military logistics or equipment maintenance operations. The solicitation is classified as a subcontract under NAICS code 331221, relating to forging and stamping operations, and is open for response until July 27, 2026, with an initial posting date of July 20, 2026. The contracting entity operates under the Department of Defense through the Construction & Equipment MRO SVC I organization. There is no set-aside designation indicated, and while no specific point of contact or physical address is provided, the procurement is managed through the DIBBS platform for official documentation and submissions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
Titanium Metal Sheet Fabrication and SupplyThe contract pertains to the supply of titanium metal sheets measuring 0.032 inches in thickness and dimensions of 36 inches by 96 inches, manufactured to meet the stringent material specifications outlined in SAE AMS4901V and AMS2809B. Full traceability and certification are required, ensuring every batch is documented from raw material origin through final inspection and delivery. The material must comply with military and aerospace standards for purity, mechanical properties, and surface quality, with documentation provided to confirm adherence. This is a subcontract under the Department of Defense, specifically for the Construction & Equipment MRO SVC I agency, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-8000. The solicitation was posted on July 20, 2026, with proposals due by July 24, 2026, and the North American Industry Classification System code 331221 identifies the industrial category as nonferrous metal rolling, drawing, and extruding.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 331221
New
DIBBS
POST, FENCE, METALThe contract specifies the procurement of 92 zinc-coated steel pipe fence posts, each with a 4.0-inch outer diameter, 13.0-foot overall length, and a weight of 9.11 pounds per foot, conforming to Federal Specification RR-F-191K Revision K dated February 13, 2023. These posts are intended for use as 4-inch nominal diameter gate posts in chain link fencing systems and must adhere to all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging, preservation, and labeling must follow MIL-STD-129 with 2D Data Matrix barcodes on all packaging levels, and palletization must comply with DLA Packaging Requirements for Procurement (RP001). The items are to be delivered FOB origin within five days of shipment to Sweihan Air Base, APO AE 28310, with inspection and acceptance occurring at the destination. The contract is a simplified acquisition under FAR Part 13 with a total value of $8,464.00 at a unit price of $92.00 per post and zero variance allowed in quantity. All supplies must be marked and documented in accordance with government specifications, and the contractor must comply with safety data sheet requirements, hazardous material labeling under 29 CFR 1910.1200, and the prohibition of covered defense telecommunications equipment or services unless disclosed. The contract incorporates numerous FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity, subcontracting, payment acceleration for small businesses, and safeguarding covered contractor information systems. Deliveries are subject to mandatory electronic invoicing through Wide Area WorkFlow and require compliance with the System for Award Management. Offerors must provide a valid Unique Entity Identifier and CAGE code and represent their small business status if applicable. The solicitation is issued by the Defense Logistics Agency with a response deadline of July 31, 2026, and award is expected to be based on a Lowest Price Technically Acceptable basis given the absence of evaluative factors and the simplified nature of the acquisition.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331221
New
DIBBS
ROUND BAR STEEL 2 DIAThe contract specifies the procurement of 24 inches of round bar steel with a 2-inch diameter, manufactured to meet AMS6382 specification and identified by part number 9510-LLNCP4288. The item must be packaged according to ASTM D3951 and MIL-STD-129 requirements, with palletization aligned to DLA packaging standards RP001, and all packaging must prevent damage during shipment. A Certificate of Quality Conformance is mandatory, and the material must be labeled and marked in full compliance with specified military and procurement standards. Delivery is due within 30 days after the award date, with FOB terms at destination, and both inspection and acceptance occur upon arrival at the delivery point. The pricing is firm fixed with zero tolerance for quantity variance, meaning exactly 24 inches must be delivered. The contract references multiple object text IDs for internal processing and tracking, and the unit of issue is inches as defined by DLA’s official standards. The delivery address for freight is Building 148, Bay C, Beachey Road, Cherry Point, NC, while the parcel post address is PSC 8021, Cherry Point, NC. The required delivery date is August 16, 2026, tied to purchase request number 7017476059. The solicitation number is SPEFA5-26-Q-0054, issued by the Department of Defense through the DLA Fleet Readiness Center, with Tanya Whitney as the primary point of contact. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is intended for federal procurement under DLA oversight. All technical and quality requirements from the DLA Master List override any conflicting civilian standards.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
WIRE ROPE ASSEMBLY,The contract is for the procurement of two single-leg wire rope assemblies, part number 2044148-1, identified by NSN 4010-01-338-8785, supplied by Honeywell International Inc. The delivery is due in 95 days from the contract award, with delivery terms FOB origin and inspection and acceptance performed at destination. No quantity variance is permitted, and the unit of issue is each. The items must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, including specific packaging, marking, and identification standards such as MIL-STD-129 and RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to the strictest verification levels. The item is designated as a critical application item, and while item unique identification is not required, covered defense information provisions apply. Packaging must adhere to DLA standards, palletization to RP001, and all markings must follow military specifications. Delivery is to the DLA distribution center in Tracy, California, with the required ship date set for November 1, 2026, and the original delivery deadline set for March 24, 2027. The contract is issued under solicitation SPE4A6-26-T-07XJ by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
ANGLE, STRUCTURALThis procurement involves structural steel angles conforming to ASTM A36 specifications, with a total quantity of 9,387 feet and a firm fixed price contract under solicitation SPE8E9-26-Q-0612, which is a total small business set-aside. All deliveries must comply with stringent quality and documentation requirements, including mandatory Certificate of Quality Compliance (CoQC) and metal certification for each shipment, which must be provided to both the receiving depot and the DLA Troop Support Contracting Officer. Material must be supplied in whole-foot lengths between 20 and 30 feet, with continuous identification markings on every unit that include the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s heat and lot number, dimensions, and part or die number. Markings are limited to stamping or stenciling using non-contaminating fluids and must be durable, waterproof, and legible; adhesive labels are permitted for small diameter bars and tubes, with tags acceptable for wire. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129R, with special preservation and marking codes Z and ZZ as defined by ASTM A700, and palletization in accordance with DLA packaging standards. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) for Federal Supply Groups 95 and 96 to be eligible for award; any deviation from the QSLD requirement must be explicitly declared, and use of non-QSLD-sourced material constitutes an unauthorized substitution with potential criminal penalties. Inspection and quality conformance requirements, including source inspection, are waived for QSLD-compliant suppliers, with certification reliance shifted to the CoQC. The material is subject to destination inspection and acceptance, with delivery required within 60 days of award date (ADO) and no quantity variance allowed. The product is classified as a critical application item, and all technical and quality requirements referenced in the Technical Data Package are governed by specific revisions of ASTM A36, A6/A6M-24B, A700-14, and MIL-STD-129R. Packaging shall include special marking for dual-unit quantities and compliance with all DLA packaging and shipping directives, with shipments destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331221
New
DIBBS
Seamless Aluminum Alloy Tube ManufacturingThe contract calls for the manufacture of seamless aluminum alloy tubesmeeting the precise specifications of SAE AMS-WW-T-700 Revision B, with material in H32 temper, a diameter of 6 inches, a wall thickness of 0.375 inches, and a standard length of 16 feet. All tubes must be produced to ensure structural integrity, dimensional accuracy, and compliance with the aerospace and defense industry standards outlined in the referenced specification. The project is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA per FAR 19.5, promoting small business participation in defense-related manufacturing. The NAICS code 331221 confirms the scope falls under Aluminum Alloys Rolling, Drawing, and Extruding. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, under the 17070-5002 ZIP code. The contracting entity is the Fluid Handling Division within the Department of Defense, indicating the tubes are destined for critical system applications within military or aerospace fluid transport infrastructure. While specific point of contact details are not provided, the solicitation can be accessed through the DIBBS platform via the public link, and all proposals must adhere strictly to technical, quality, and delivery requirements mandated by the specification and set-aside rules.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331221
New
DIBBS
WIRE ROPE ASSEMBLY,The contract is for the procurement of seven wire rope assemblies with NSN 4010-15-162-3813, issued under solicitation SPE4A5-26-T-294K by the Defense Logistics Agency’s ASC Supplier Oper OEM Division. Delivery is required within 169 days from award, and the solicitation closes on July 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging standards, removal of government identification from non-accepted items, and physical marking of bare items. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. The item includes technical data subject to ITAR or EAR export controls, requiring prior authorization for any disclosure to foreign persons, whether in the U.S. or abroad, and contractors must be certified under the US/Canada Joint Certification Program, complete mandatory DOD export control training, and receive DLA approval to access the data. The manufacturer must also be CMMC Level 2 certified as a C3PAO to participate.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract seeks Quality Assurance and Inspection Services for aluminum sheets to ensure full compliance with specified material standards, including accurate alloy and temper identification, verified heat and lot traceability, and correct labeling and marking as required. All inspections must be conducted with precision to confirm that delivered materials meet contractual and technical specifications before acceptance, with documentation supporting each verification step to maintain traceability and accountability throughout the supply chain. This is a Total Small Business Set-Aside under the SBA program, designated under NAICS code 541330 for Architectural and Engineering Activities, and is issued by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with performance expected to be carried out under the terms of a subcontract. Interested small businesses must submit proposals by the deadline to compete for this opportunity, which emphasizes rigorous adherence to quality control protocols and the ability to provide certified documentation of material compliance.
Engineering Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Shipment to DLA DestinationsThe contract involves the transportation of packaged aluminum sheets to two designated Department of Defense destinations: DLA Warner Robins in Georgia and Tinker Air Force Base in Oklahoma. Shipping is conducted under FOB Origin terms, meaning the buyer assumes all responsibility and costs for the goods once they leave the seller’s location. Invoicing must comply with the Wide Area WorkFlow system to ensure proper documentation and payment processing. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code for this procurement is 484220, which corresponds to truck transportation of freight, excluding special commodities. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and is issued under the Construction & Equipment MRO Svc I agency program managed by the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThis contract requires strict adherence to OSHA-compliant hazard warning labels as mandated by DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, ensuring all hazardous chemicals are properly labeled in accordance with federal workplace safety regulations. The scope centers on hazard communication and labeling compliance for supplies or services under a subcontract, where accurate and standardized labeling is critical to worker safety and regulatory alignment. All labeled materials must reflect current GHS standards for chemical hazard classification, signal words, pictograms, precautionary statements, and supplier information. The contract is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by the NAICS code 541690, which covers other scientific and technical consulting services. It was posted on July 20, 2026, with responses due by July 27, 2026, and falls under the Department of Defense's Construction & Equipment MRO SVC I procurement category. Performance location details are unspecified, but compliance must meet federal requirements regardless of site. Participation requires a thorough understanding of both OSHA and DFARS labeling obligations to ensure full regulatory compliance and avoid contract noncompliance penalties.
Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Preservation, Packaging, and Marking ServicesThe contract seeks subcontractor services for the preservation, packaging, and marking of aluminum sheets in accordance with military standards, requiring specific processes including drying, edge protection, fiberboard wrapping, and adherence to MIL-STD-129 labeling with the code 'ZZ'. All work must meet stringent defense requirements to ensure product integrity during storage and transport. The solicitation is restricted to small businesses under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 493190 indicating warehousing and storage services. The opportunity is issued under the Department of Defense’s Construction & Equipment MRO SVC I program, with responses due by July 27, 2026, and was posted on July 20, 2026. Performance location details are unspecified, and interested parties must access the full solicitation through the DIBBS portal using the provided link.
Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Handling and SDS SubmissionThe contract requires strict compliance with the identification, handling, and labeling of hazardous materials in accordance with DFARS 252.223-7001 and MIL-STD-129 standards. All hazardous substances must be properly documented with corresponding Safety Data Sheets submitted as part of the delivery and packaging process, ensuring full regulatory alignment and operational safety throughout the supply chain. The scope encompasses end-to-end management of hazardous material protocols, from initial recognition through final shipment, with an emphasis on accuracy in labeling and timely SDS submission to meet Department of Defense requirements. This subcontract, posted on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 562910 for other remediation services and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract vehicle. The place of performance and specific office details are not provided, but all work must adhere to federal military standards for hazardous material logistics. Interested parties must respond by the deadline through the DIBBS portal to be considered for award.
Remediation Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Certificate of Quality and Mill Certification ServicesThe contract requires the generation and submission of a Certificate of Quality alongside comprehensive mill-material traceability documentation for all supplied materials. This includes detailed reporting of heat and lot numbers, specific alloy grade, temper designation, and confirmation of compliance with applicable ASTM and SAE standards. All documentation must be accurate, complete, and verifiable to ensure material integrity and regulatory alignment throughout the supply chain. The service is being procured as a subcontract under the NAICS code 541380, with the Department of Defense through its Construction & Equipment MRO SVC I office acting as the contracting entity. Responses must be submitted by the deadline of July 27, 2026, and the work must adhere strictly to the technical requirements outlined to meet military-grade material assurance protocols.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Marking and Labeling ServicesThe contract requires permanent marking of aluminum plates in strict compliance with MIL-STD-129 and ASTM B666 standards, ensuring traceability and regulatory adherence for defense-related applications. Marking must include critical identifiers such as the National Stock Number, alloy designation, heat or lot number, dimensions, and applicable specifications, using approved methods including stamping, stenciling, or adhesive labels. All markings must be durable, legible, and resistant to environmental degradation to meet military durability requirements. This is a subcontract solicitation issued under NAICS code 323111 for printing and related support activities, managed by the Department of Defense through the CONSTRUCTION & EQUIPMENT MRO SVC I organization. The solicitation is open for responses from July 20, 2026, with a firm deadline for submissions on July 27, 2026. The place of performance and point of contact details are not specified, but adherence to the technical standards and submission timeline is mandatory for consideration. Interested parties must ensure full compliance with the marking methods and data requirements outlined in the referenced military and material specifications.
Commercial Printing (except Screen and Books)

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 385110
New
DIBBS
Packaging and Preservation ServicesThe contract entails the packaging and preservation of aluminum plates in strict accordance with military standards MIL-STD-2073-1E and material specification ASTM B660-23, ensuring compliance with defense-grade requirements for handling and storage. The work includes specific preservation method ZZ, which involves detailed cleaning and thorough drying procedures to prevent corrosion and contamination, followed by proper palletization to ensure secure transport and long-term integrity. All processes must meet the rigorous environmental and quality controls mandated by the Department of Defense to maintain material readiness and operational reliability. This is a subcontract opportunity under the NAICS code 385110, posted by the Department of Defense through its Construction & Equipment MRO SVC I contracting office. Responses are due by July 27, 2026, with the solicitation open for submission starting July 20, 2026. While no specific place of performance or point of contact is listed, the work is expected to align with DLA logistics infrastructure and procurement protocols, and all submissions must be made through the official DIBBS platform using the provided solicitation number SPE8E926Q0602.

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331315
New
DIBBS
Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Military Marking and Barcoding ServicesThe contract requires the application of standardized military markings and barcodes in strict compliance with MIL-STD-129 to ensure proper item identification, traceability, and storage labeling for defense-related equipment and supplies. All labeling must adhere to the established military standards to support operational readiness, logistics tracking, and inventory management across the Department of Defense supply chain. The work is to be performed at the Tobyhanna location with a ZIP code of 18466-5050, and the subcontract is classified under NAICS code 561990 for other administrative and support services. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026, and is open for bidding through the DIBBS platform. No set-aside provisions are specified, and the contracting activity falls under the Construction & Equipment MRO SVC I organization within the Department of Defense.
All Other Support Services

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets (MSDS) for rubber strip products, strictly in accordance with 29 CFR 1910.1200, which governs hazard communication standards. Compliance is mandatory unless the rubber strip qualifies for exemption under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the Federal Food, Drug, and Cosmetic Act (FDCA), the Consumer Product Safety Act (CPSA), the Federal Hazardous Substances Act (FHS), or the Federal Aviation Administration (FAA) regulations. The work is structured as a subcontract under NAICS code 541690, falling under the Department of Defense’s Construction & Equipment MRO SVC I program, with performance obligations centered at Tobyhanna, Pennsylvania, zip code 18466-5050. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all deliverables must align with U.S. regulatory requirements to ensure the safe handling, storage, and use of the rubber strip material in defense-related applications.
Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details