Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, ORIFICE, FLUID

Active
SPE7M0-26-T-027JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a plate, orifice, fluid with NSN 4730-01-598-8862 and part number DDSP15TYC, issued under solicitation SPE7M0-26-T-027J. One unit is required, to be delivered within five days of award, FOB origin, with no variance allowed in quantity. Delivery must be made to the specified destination address in Pascagoula, Mississippi, designated for the USS RICHARD M MCCOOL JR LPD-29, with strict instructions to avoid parcel post and use the fastest traceable shipping method. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, container types, and marking per MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and all materials must adhere to restrictions prohibiting intentional addition of mercury or mercury compounds, except in approved functional applications such as batteries, sensors, or weapon systems, with additional containment requirements for portable devices containing mercury. Class I ozone-depleting chemicals are strictly prohibited, and any substitutions must be submitted for approval unless explicitly authorized by specifications. The contract references the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation issue date, and mandates compliance with all embedded technical and quality identifiers. The required delivery date is July 30, 2026, and the contract is categorized as a federal solicitation under NAICS code 332919, managed by the Department of Defense’s Maritime Supply Chain ESOC Buys.

General Info

Procure one plate NSN 4730-01-598-8862, deliver by July 30, 2026, to USS RICHARD M MCCOOL JR LPD-29, FOB origin, strict packaging and mercury rules.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2000 JERRY ST PE HWY BLDG 2039, PASCAGOULA, MS, 39567, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-027J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
PLATE,ORIFICE,FLUID
PLATE,ORIFICE,FLUID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
BESTWELD INC 1FE46 P/N DDSP15TYC
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688205 0001 EA 1.000
NSN/MATERIAL:4730015988862
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7M0-26-T-027J
SECTION B
PR: 7017688205 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N36049
USS RICHARD M MCCOOL JR LPD-29
SUPERVISOR SHIPBUILDING GULF COAST
2000 JERRY ST PE HWY BLDG 2039
PASCAGOULA MS 39567
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N36049
USS RICHARD M MCCOOL JR LPD-29
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N3604953090043
RDD: 999
PROJ: ZS0 TP 1
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: V9B ADV: 23 FC: V7
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE7M0-26-T-027J NSN/Part Number: 4730-01-598-8862 Quantity: 1 EA Purchase Request: 7017688205QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-026W
The contract is for one elbow hose with NSN 4730-01-517-8231 and part number 112-4387 for Caterpillar Inc or 24KP504 for Oshkosh Defense LLC, requiring delivery within five days FOB origin with no quantity variance allowed. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, packed in a unit container with no special marking or palletization beyond prescribed guidelines. Ozone-depleting chemicals are strictly prohibited in any component or process, and any substitutes must be pre-approved unless already authorized by specification. The delivery destination and shipping address is Schenfeld Barracks, HI, with the shipment designated as RDD 999/NMCS under DLAD procedure notes C19 and C20. The contract number is SPE7M0-26-T-026W, with an original required delivery date of July 31, 2026, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The unit of issue is each, priced at $1.00 per unit, with inspection and acceptance occurring at the destination point. Government use identifiers and freight details are specified for internal logistics tracking, and the procurement falls under NAICS code 332919 managed by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
TEE ASSEMBLY
Solicitation # N0010426QFG04
This contract pertains to the procurement of a specialized 0.25 IPS SW x 0.438-20UNF-2B x 0.438-20UNF-2B Tee Assembly designated as SPECIAL EMPHASIS material (Level I), intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to Naval Sea Systems Command Drawing 845-2445109 and relevant specifications including MIL-C-24679 for Alloy C71500 and QQ-N-281 Class A, with mandatory quantitative chemical and mechanical analysis, hydrostatic testing at 1050 PSI for a minimum of three minutes with zero leakage or deformation, and adherence to precise pressure and time tolerances. All materials require permanent traceability via heat-lot or traceability markings, maintained throughout fabrication and assembly, with certification data and test reports that are non-transcribable and must be electronically signed under controlled, unique authentication protocols. The contractor must maintain an ISO-9001 compliant quality system with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO-17025, with full government inspection rights at source including subcontractor facilities. All certifications, welding procedures, and NDT results must be submitted prior to production and shipment, with approval required from Portsmouth Naval Shipyard for each delivery via WAWF using designated government identifiers and notification email. Welding and brazing must comply with S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with welding procedures and qualification data submitted for review and approval at least 120 days after contract award and no welding permitted without formal prior approval. Thread lubricants containing molybdenum disulfide are prohibited; only A-A-59004 anti-galling compound may be used. Strict material handling protocols require segregation, traceability through all processes, and 100% inspection of certification documentation, traceability markings, and nondestructive test results. The solicitation is issued under Emergency Acquisition Flexibilities and is a total small business set-aside with mandatory compliance with Buy American and NOFORN restrictions due to access to Naval Nuclear Propulsion Information. Offers are due by September 14, 2
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
48--PARTS KIT,BALL VALV, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RFF27
The contract involves the procurement of a parts kit for a ball valve, identified by NSN 7H-4820-015313272-L1 and part number 803-5959304, with a required quantity of 33 kits for use in repair or modification work at the Portsmouth Naval Shipyard in Kittery, Maine. The solicitation, issued under number N0010426RFF27, is a presolicitation notice published on July 17, 2026, with a response deadline of August 31, 2026. Although the government has determined that commercial item acquisition policies under FAR Part 12 do not apply, suppliers may still submit information within 15 days of the notice to demonstrate their capability to provide commercial items that meet the requirement. The acquisition is subject to trade agreement provisions, including the Buy American Act–Free Trade Agreements clause and the World Trade Organization Government Procurement Agreement, which may affect sourcing eligibility. The contracting activity is managed by the Navy Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Benjamin Spangler as the primary point of contact for inquiries.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
58--CONTROL-CONVERTER - AND OTHER REPLACEMENT PARTS
Solicitation # N0010425RYB32
This contract is a firm-fixed-price solicitation issued by the Department of Defense through the Naval Surface Warfare Center, specifically for the procurement of replacement parts including the VALVE, LINEAR, DIRECT and CONTROL-CONVERTER, with a NAICS code of 332919. The solicitation requires items to be supplied by authorized distributors of the original manufacturer, with strict adherence to military specifications including MIL-STD-130 Rev N for marking, MIL-STD-2073 for packaging, and Cage Codes 78062 with reference numbers 52106-002, 21391-001, and 3798354-1. All components must be mercury-free and free from contamination, with any use of metallic mercury requiring prior written approval and labeling. The items are intended for use on submarines and surface ships, and compliance with stringent quality assurance standards is mandatory, including the retention of inspection records for 365 days after final delivery. DCMA inspection and acceptance before shipment is required to enable payment, and all contractors must affirm compliance with federal acquisition regulations covering equal opportunity, small business subcontracting, cost accounting standards, supply chain security, and limitation of liability for high-value items. The solicitation has undergone multiple amendments extending the closing date for quotes to July 31, 2026, and updating the list of authorized National Stock Numbers to include 014186453 (QTY 12), 014241202 (QTY 7), and 015432088 (QTY 3), while removing several other NSNs. The period of performance is 180 days from the order date, with early and incremental deliveries permitted and encouraged under Emergency Acquisition Flexibilities. The contract incorporates numerous standard clauses governing inspection, acceptance, delivery, electronic submission of proposals via email, and certification of cost or pricing data. All documents issued under this contract are considered officially delivered upon electronic transmission or fax, and contractors must comply with distribution statement requirements under OPNAVINST 5510.1 governing the handling and dissemination of technical data. The contracting officer retains full authority to approve design changes, enforce compliance, and ensure all subcontractors mirror the same contractual obligations regarding quality, mercury restrictions, and inspection processes.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
VALVE,REGULATING,FL
Solicitation # N0010426QLB88
This contract pertains to the repair of a VALVE, REGULATING, FL under a fixed-price arrangement issued through Emergency Acquisition Flexibilities, with a required Repair Turnaround Time of 363 days from the date the asset is physically received at the contractor’s facility, as recorded in the Commercial Asset Visibility system. The contractor must adhere to strict quality standards including MIL-STD-130 Rev N for marking, original manufacturer specifications for testing and inspection, and compliance with all applicable technical documents and drawings. Government Source Inspection is mandatory, and all repair work must follow approved procedures without unauthorized substitutions; any design or part number changes require prior written approval from the NAVICP-MECH Contracting Officer. The contract includes provisions for valuation adjustments if an item is deemed beyond repair, with a ceiling of $______ for testing and evaluation costs, and requires the contractor to compare the repair price against the cost of purchasing a new unit. The contract mandates compliance with multiple federal and DoD regulatory clauses including Buy American requirements, cybersecurity maturity model certification, small business subcontracting obligations, and security prohibitions under recent deviation directives. All documentation must be handled in accordance with distribution statements and access controls, particularly those marked “NOFORN” or “Official Use Only,” and only authorized distributors of the original manufacturer may qualify for award, requiring formal proof of authorization. Freight is FOB Origin, handled by Navy CAV or proxy CAV per applicable NAVSUP directives, and quotes must include total price, unit price, and confirmed RTAT. The contract will be awarded bilaterally upon the contractor’s written acceptance, with records of all inspections to be maintained for 365 days after final delivery. The solicitation number is N0010426QLB88, with a response deadline of June 15, 2026, and the point of contact is Joseph D. Weaver, with the acquiring office located in Mechanicsburg, PA.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
Federal
48--VALVE,THROTTLE
Solicitation # N0010426RYA9R
This contract pertains to the procurement of a THROTTLE VALVE under solicitation N0010426RYA9R, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with a response deadline of August 7, 2026. The contract is a firm-fixed-price agreement requiring strict adherence to military specifications, including MIL-STD-130 Rev N for marking, and prohibits mercury contamination in all materials due to its corrosive and toxic nature in submarine and surface ship environments. Any use of mercury as a functional component requires prior written approval and the inclusion of a warning plate. The contractor must maintain comprehensive inspection records for 365 days after final delivery and is responsible for ensuring all items meet contractual requirements, with government inspection rights reserved. Substitutions or design changes must be formally approved with detailed documentation and classified under specific code standards. The contract mandates compliance with numerous federal clauses, including the requirement for a Small Business Subcontracting Plan if the offeror exceeds 750 employees, and obligations related to equal opportunity for veterans and workers with disabilities. Offers must be submitted via email with a completed Proposal Adequacy Checklist, and only authorized distributors of the original manufacturer are eligible for award, requiring proof of authorization. The item must be delivered FOB Origin, and accelerated delivery is encouraged. All documentation referenced in the contract, including military standards and technical manuals, must be obtained from approved government sources, with special handling required for NOFORN and official-use-only materials. The contract is certified as a rated order under the Defense Priorities and Allocations System, prioritizing national defense needs, and includes cybersecurity maturity certification requirements. Awardees must provide their CAGE code and ensure all part numbers, nomenclature, and NSN data are verified prior to submission.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,STOP-CHEC
Solicitation # N0010426QND40
This contract specifies the procurement of a Bonnet and Stem Assembly for a 1-inch stop check valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to NAVSEA drawing 2177934 and associated specifications, with material requirements tightly controlled: the bonnet ring must be forged or cold-drawn QQ-N-281 or ASTM-B564/ASTM-B164 UNS N04400, the stem and disc holder must meet QQ-N-281 Class A or B or ASTM-B164 UNS N04400, and the bonnet must be forged MIL-C-24679 or rod MIL-C-15726 Alloy C71500. All components require traceable certification of chemical and mechanical properties, with welds and pressure tests subject to strict acceptance criteria defined in the drawing and referenced standards. Each part kit must undergo shell and backseat pressure tests with precise tolerances based on test pressure levels, and all threads must be cut, not cold-formed, and inspected per FED-STD-H28 with System 21 as the baseline. O-ring grooves and sealing surfaces must comply with the General Acceptance Criteria unless otherwise specified. Mercury and mercury-containing compounds are strictly prohibited. The contractor must maintain a certified quality system compliant with ISO-9001, calibrated under ISO-10012 or ANSI-Z540.3 with ISO/IEC 17025, or as an alternative MIL-I-45208 with MIL-STD-45662. Quality assurance includes full government inspection at source, with DCMA involvement required for welding procedure approvals, nondestructive testing oversight, and traceability verification. All material must be traceable from raw stock to finished component via unique heat-lot markings, maintained through all processes including subcontracting, and documented on certification reports verified for completeness and legibility. Electronic signatures are accepted and must be uniquely controlled and auditable. Final certification requires a signed Certificate of Compliance linking each part to its test data and contract, submitted via WAWF with specific shipment and notification instructions to Portsmouth Naval Shipyard. No material may be shipped until acceptance is confirmed. The contract is subject to Emergency Acquisition Flexibilities, requires bilateral acceptance, and is designated a rated order under the Defense
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # SPRPA125QES75
This contract is a repair order for ALRE EMALS systems, specifically for the procurement of a BALL VALVE under solicitation number SPRPA125QES75, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. The solicitation, posted on May 19, 2026, has been extended with a response deadline of May 21, 2026, at 1400 ET, and is classified as a new spares procurement requiring compliance with several federal mandates including the Buy American Act, Free Trade Agreements, Balance of Payments Program, and priority rating for national defense and emergency preparedness. Offerors must adhere to the Notice of Priority Rating and submit required certifications related to domestic sourcing and payment obligations. Additionally, the contract enforces equal opportunity for workers with disabilities and mandates proper item identification and valuation procedures as outlined in current federal guidelines. The primary point of contact for inquiries is Thomas Kuhnle, reachable via phone at 215-737-4024 or email at THOMAS.KUHNLE@DLA.MIL. The North American Industry Classification System code for this procurement is 332919, indicating it pertains to other fabricated metal product manufacturing.
Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332919
New
Federal
SLEEVE AND SLIDE,DI
Solicitation # N0010426QYA6G
This contract pertains to the procurement of the SLEEVE AND SLIDE,DI, issued under Emergency Acquisition Flexibilities with a rated order certification for national defense use, requiring strict adherence to the Defense Priorities and Allocations System (15 CFR 700). The item must be manufactured in accordance with specified Cage Code 78062 and reference number 20369-450, and physically marked per MIL-STD-130, Rev N. Strict prohibitions against mercury contamination apply, with mandatory compliance protocols including testing for mercury vapor, documentation of any approved mercury use, and inclusion of warning plates if mercury is functionally required. All subcontractors must abide by these requirements. Inspection and acceptance are mandatory, with the contractor responsible for quality assurance, recordkeeping for 365 days post-delivery, and use of approved inspection methods. Government source inspection is required, and delivery terms are FOB Origin. The closing date for responses has been extended to July 30, 2026, with all prior amendments superseded. The contract mandates that only authorized distributors of the original manufacturer may submit offers, requiring proof of authorization signed by a company official. The procurement is subject to Buy American and veterans’ and disabled workers’ equal opportunity provisions, with CMMC Level 2 self-certification required for cybersecurity maturity. Packaging must comply with MIL-STD-2073 as outlined in the schedule, and the contractor must ensure all technical documents and drawings provided by the Navy—including those with Distribution Statements C, D, E, F, or X—are handled according to prescribed access and dissemination controls. The resulting award requires bilateral acceptance, and detailed technical documentation must be obtained through designated DoD sources, including NAVSUP-WSS. The unit and total prices are to be filled in upon submission, and the awardee’s CAGE code must be provided prior to execution.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
Federal
ROD,OPERATING
Solicitation # N0010426QFG02
This contract pertains to the procurement of operating rods and related components designated as Special Emphasis Material (Level I), critical to the operation of shipboard systems where failure could result in catastrophic consequences including loss of life, vessel damage, or mission failure. The material must conform to specific drawings and specifications, primarily QQ-N-286, form 2, annealed and age hardened, with stringent requirements for chemical and mechanical testing, traceability, and certification. All components require full traceability from raw material through fabrication to final delivery, with unique heat-lot identifiers permanently marked on the item and matched to certified test reports. Testing must be conducted by approved laboratories for critical properties like slow strain rate tensile testing, and non-destructive ultrasonic inspections are mandated for starting material over four inches in diameter. Compliance is mandatory under ISO-9001 and related standards, with quality systems subject to government audits and inspections at source. All deliveries must be accompanied by complete certification data submitted via WAWF to Portsmouth Naval Shipyard with pre-shipment approval required; no material may be shipped until acceptance is confirmed. The contract mandates 100% inspection of all certification records, marking legibility, and conformance to specifications, with zero defects required for lot acceptance. Electronic signatures are permitted but must be uniquely controlled and auditable. Any non-conformance, waiver, or deviation must be formally documented, classified as Critical, Major, or Minor, and approved by the Contracting Officer. Subcontractors are subject to the same rigorous controls, and the prime contractor must ensure all suppliers meet traceability, quality, and documentation standards. The effort is a total small business set-aside, subject to DPAS priority rating for national defense, with delivery deadlines tied to contract effective date and certification submissions due no later than 20 days prior to delivery. Final acceptance hinges on verified documentation, material marking integrity, and full compliance with all referenced military and commercial standards.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 25 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALV
Solicitation # N0010426QFG46
This contract imposes stringent requirements for the supply of a parts kit for a trash disposal ball valve used in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the ship itself. The material is classified as SPECIAL EMPHASIS Level I, mandating rigorous quality control, full traceability from raw material to finished component, and 100% inspection of certification documents and physical markings. The ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium with specified mechanical properties, while seals must be made exclusively from Mearthane Products Inc.'s MD71-GG Mearthane compound, meeting exact hardness, tensile, and water absorption standards. Hydrostatic or dye penetrant testing is required for each ball, with documented certifications that must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, referencing classified drawing 4456141 Rev A for confidential pressure values. All certifications must be positive, unqualified, and directly link traceability marks on the physical parts to chemical and mechanical test reports. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025 or MIL-I-45208 and MIL-STD-45662, with all welding, brazing, and surface treatments performed under approved procedures and documented qualification data submitted in advance. Hardfacing, titanium welding, and repair activities require prior Navy approval and notification to DCMA 72 hours in advance of testing. Traceability markings must be permanently applied per MIL-STD-792, visible after assembly, and retained through all processing stages; non-metallic seats require tagging instead of direct marking. The contract prohibits mercury, requires full compliance with Navy-specific engineering change protocols, and demands complete documentation of all nonconformances, waivers, and deviations approved only by the Contracting Officer. Access to classified drawings is mandatory post-award, requiring facility clearance under FAR 52.204-2, and all materials must pass zero-defect inspection per ANSI/ASQ Z1.4 with sample sizes tailored to lot size. Deliverables are subject to Government inspection at source, and all documentation must be submitted electronically through ECDS and WAWF, with no shipment permitted until formal acceptance is received by the Navy.
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QFG47
This contract pertains to the procurement of a 1/2-inch hull and backup ball valve designated as Special Emphasis Material (Level I), critical to shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The material must strictly conform to Naval Ship Systems Command Drawing 845-4558791 and associated engineering reports, with detailed requirements for material composition, including specific alloys such as ASTM-B369 UNS C96400, QQ-N-286, ASTM-B505 UNS C90300, and SAE-AMS-6931, each requiring full chemical and mechanical certification. The valve assembly must be processed without molybdenum disulfide grease, lubricated per CID A-A-50433 and A-A-59004, and assembled with precise torque values and component substitutions such as Delrin AF DE588 thrust washers replacing Nylatron. All metallic components must undergo mandatory nondestructive testing including liquid penetrant, dye penetrant, ultrasonic, and radiographic inspections per specified standards, while non-metallic parts like seats must meet exact physical properties including hardness, tensile strength, and water absorption with strict supplier restrictions. Traceability is paramount: every component must be permanently marked with traceable heat or lot numbers, and certifications must directly link material properties to individual parts with no transcription allowed and no disclaimers permitted. The contract enforces a zero-defect acceptance policy for sampling, full 100% inspection of certifications and markings, and requires ISO-9001 or MIL-I-45208 quality systems with calibration to ISO-10012 or ANSI-Z540.3. All welds, brazing, and repairs must follow S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualifications submitted for government approval in advance. Material handling mandates segregation, preservation of traceability through all operations, and strict control of filler metals. Fasteners must be marked per MIL-DTL-1222 and NASM 17828, with self-locking nuts requiring six-dot markings and qualification under NASM25027. Each shipment requires a signed Certificate of Compliance verifying full adherence to all contract requirements, including lubricants, O-ring installations, and
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334310
New
DIBBS
HEADSET, ELECTRICAL
Solicitation # SPE7M0-26-T-027G
The contract is for the procurement of 20 electrical headsets with NSN 5965-01-686-4435 under solicitation number SPE7M0-26-T-027G, which is a total small business set-aside classified under NAICS code 334310. Delivery is required within five days of award, and the solicitation was posted on August 3, 2026, with responses due by August 14, 2026. The acquisition is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense, with Audrey Acuna as the primary point of contact. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The alternate offeror must submit a complete data package for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and the entire procurement falls under federal procurement rules with no data available on specific packaging requirements beyond general DLA compliance.
Audio and Video Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-027R
This contract pertains to the procurement of a single hose assembly, non-metered, identified by NSN 4720-01-571-2621 and part number AT361247 from Deere & Company, with a required delivery of one unit within five days of contract award. The item must be delivered FOB origin and is subject to inspection and acceptance at the destination, with no tolerance allowed for quantity variance. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and specific packaging codes, with no special marking required. The item is to be palletized per DLA guidelines and shipped to the DLA distribution facility in Santa Rita, Guam, with final delivery destined to the USMC Engineer Detachment Pacific in Koror, Palau. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with the applicable revision based on the solicitation issue date. Transportation and shipment procedures follow DLAD PROC NOTES C19 and C20, and the unit of issue is EA. The contract was solicited under SPE7M0-26-T-027R, with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. Point of contact for the procurement is Abaigael Masterson of the Department of Defense’s Maritime Supply Chain ESOC Buys office, and the NAICS code is 332999 for other miscellaneous manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-027B
The contract is for a single unit of a metal pipe assembly identified by NSN 4710-01-662-4932 and part number 1051F-01-05, with a total price of one unit at $1.00. Delivery is required within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination point. Packaging must fully comply with MIL-STD-2073-1E, including preservative methods AE clng/dry, and marking must adhere to MIL-STD-129 with no special marking required. The item must be palletized per DLA packaging requirements, shipped via traceable freight methods excluding parcel post, and delivered to Joint Base Lewis McChord, Washington. The shipment is designated as RDD/NCMS with no RDD code and must be marked for delivery to W68PPA, 0024 QM CO Composite Suppl. The contract falls under solicitation SPE7M0-26-T-27B, with a required delivery date of July 31, 2026, and technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. All documentation and compliance must align with DoD standards, including unit of issue and procurement protocols.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
SEPERATOR, MOISTURE
Solicitation # SPE7M0-26-T-027F
This contract is for the procurement of a moisture separator, identified by NSN 4310016602143 and part number 17-600-P2LP from Peerless Mfg Co, with a single unit required and a total purchase price of $1.00. Delivery is required within five days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and packaging codes, while marking follows MIL-STD-129 with no special marking required. The item is destined for USS RALPH JOHNSON DDG 114 at FPO AP 96691-3300, with transportation handled under DLAD PROC NOTES C19 and C20, and palletization must meet DLA packaging requirements. The solicitation number is SPE7M0-26-T-027F, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys, with a response deadline of August 14, 2026, and a required delivery date of July 31, 2026. Technical and quality requirements are governed by the DLA Master List, and the unit of issue is the individual unit EA as defined by ANSI X12 standards. All vendor compliance, including documentation and submission, must align with DLA’s eProcurement guidelines and the specified point of contact, Grace Beck, for any inquiries.
Air and Gas Compressor Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-027E
The contract pertains to the procurement of one unit of a metal tube assembly with NSN 4710-01-541-3146 and purchase request number 7017707031, under solicitation SPE7M0-26-T-027E. Delivery is required within five days of award, with FOB origin terms and no quantity variance permitted. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, while adhering to MIL-STD-129 for marking and labeling. All packaging and labeling must follow DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. The unit of issue is each, and palletization must conform to DLA packaging directives. The shipment must be sent via traceable freight methods—parcel post is prohibited—and delivered to the specified freight address in Conneaut Lake, Pennsylvania, with a mandatory military shipping identifier. The required delivery date is July 31, 2026, and the contract includes specific government-only fields for tracking and logistics control. The supplier, Grove U.S. LLC, is obligated to meet all technical and quality standards referenced through DLA’s online master list, with revisions tied to the solicitation issue date controlling compliance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-026H
The contract pertains to the procurement of one metallic tube with NSN 4710014773236 and part number 7910016291, issued under solicitation SPE7M0-26-T-026H by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of award, with FOB origin terms and zero variance allowed in quantity. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, including palletization standards. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly authorized by the specification. The tube is to be shipped via traceable freight methods excluding parcel post to the designated delivery point in Conneaut Lake, Pennsylvania, with mandatory marking and documentation including the government purchase request number 7017707035 and government-furnished identifiers. The original required delivery date is July 31, 2026, and the item is classified under NAICS code 331210 for manufacturing of metal pipe and tube.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-026Z
This contract is for a single electrical plug connector with the NSN 5935-01-703-7200 and solicitation number SPE7M0-26-T-026Z, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The item is classified as a critical application component and must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific packaging, marking, and identification mandates including MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling. The connector must be supplied by one of four preapproved manufacturers: Delta Electronics Manufacturing Corp, Northrop Grumman Systems Corporation, Radiall USA Inc, or SV Microwave, Inc., each with designated part numbers. Delivery is required in five days FOB destination with no quantity variance allowed, and inspection and acceptance occur at the delivery point. Packaging must adhere to DLA packaging guidelines, including palletization standards and special marking instructions, with no additional special markings required. The shipment is destined to APO AP 96543-4052 with a backup freight address at Anderson AFB in Guam, and transportation instructions reference specific DLA procedural notes. The original required delivery date is July 31, 2026, and the contract includes government use codes and contact information for inquiries.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, TORQUE
Solicitation # SPE7M0-26-Q-1144
The contract pertains to the procurement of a single unit of a TORQUE MOTOR with NSN 6105-01-488-4917 under solicitation SPE7M0-26-Q-1144, with a mandatory delivery deadline of 30 days after award. All technical and quality requirements governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment later updates the referenced revision. The contractor must comply with DLA packaging and data requirements without exception, and if an alternate part is proposed, a complete data package covering both the approved and alternate part must be submitted. Government identification must be removed from any non-accepted supplies. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office. Primary point of contact is Laurie Wassmuth, reachable via email and phone provided.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M0-26-T-026V
The contract pertains to the procurement of one check valve, identified by NSN 4820-01-408-6995 and part number 09-21430-1-1, supplied by Sargent Aerospace & Defense, LLC, for a critical application. Delivery is required within five days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s broader packaging requirements, and the item must be shipped via the fastest traceable means, explicitly excluding parcel post. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware unless exempted for specific functional components such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-bearing devices needing shockproof construction and secondary containment as mandated by NAVSEA 5100-003D. The contract references technical and quality requirements from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date. Delivery is targeted for July 31, 2026, to the Portsmouth Naval Shipyard in Kittery, ME, with the point of contact for inquiries being Kathleen Hipes of the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M0-26-T-026F
This contract solicits three adapter connectors with NSN 5935-01-017-5892, to be delivered within five days of award, FOB origin, with zero variance in quantity. The items must comply strictly with MIL-STD-2073-1E for packaging and MIL-DTL-55330 for preservation, while marking follows MIL-STD-129 with no special markings required. The connectors are classified as critical application items and must be sourced exclusively from approved suppliers identified by their part numbers and manufacturers. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, or weapon systems, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacturing or testing is prohibited unless prior written approval is obtained from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. The delivery destination is Holloman AFB, NM, and shipping must occur via traceable freight methods—parcel post is explicitly forbidden. The item is subject to inspection and acceptance at the destination, and performance must meet all technical and quality requirements referenced from the DLA Master List. The contract closes for responses on August 14, 2026, with an original required delivery date of July 31, 2026, and is managed by the Department of Defense under the Marine Corps Supply Chain E-SOC.
Electronic Connector Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTER
Solicitation # SPE7M0-26-T-026G
The contract pertains to the procurement of a Synchro Transmitter, identified by NSN 5990-00-913-5542 and part number AY605-30B1, with a single unit requirement to be delivered within five days of award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically at Hill Air Force Base, Utah. The item is classified as a critical application with strict packaging and handling requirements rooted in MIL-STD-2073-1E and MIL-STD-129, including special ESD and EMI protections mandated by MIL-PRF-81705, which require certified barrier materials and qualified suppliers listed on QPL-81705. All components must be safeguarded against electrostatic discharge and electromagnetic interference with proper cushioning and protective packaging, especially for leads and terminals, even when not explicitly detailed in packaging codes. The acquisition is subject to tailored higher-level quality requirements and incorporates technical standards from the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise stated. Cybersecurity compliance is required at CMMC Level 2 via self-assessment, and the supplier must ensure all packaging and handling protocols meet DLA mandates for ESD/EMI environments. The contract includes specific shipping instructions prohibiting parcel post and requiring fastest traceable means, with detailed parcel and freight addresses provided. All information on unit of issue, packaging, and marking is governed by DLA directives, and the supplier must verify compliance with all referenced standards. The original required delivery date is July 31, 2026.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details