Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLATE, WALL, ELECTRIC

Active
SPE4A0-26-T-3995Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of three units of a wall plate electric component identified by NSN 5975-01-714-0946 and part number 5-4-4875, governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. All items must comply with stringent sampling protocols per MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Packaging must adhere strictly to DLA requirements under RP001 and MIL-STD-129, with hazardous materials following FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet ASTM D3951 unless superseded by DLA standards. The item must be palletized, marked, and labeled per specified guidelines, with no variance allowed in quantity. Delivery is FOB origin within five days of contract award to Fort Carson, Colorado, with shipment required via traceable freight methods and prohibited from parcel post. The supplier ID is W80BTZ61950111, with mandatory delivery to the Fort Carson receiving point, and the required delivery date is July 17, 2026.

General Info

Procure three wall plate electric units NSN 5975-01-714-0946, FOB origin, deliver to Fort Carson by July 17, 2026, per strict DLA and military standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

327110 - Pottery, Ceramics, and Plumbing Fixture ManufacturingView NAICS

Place of Performance

4885 CHILES AVE, FORT CARSON, CO, 80913-4093, US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-3995.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,WALL,ELECTRIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
PLATE,WALL,ELECTRIC
TDP Rev A Gen 1 IAW BASIC DRAWING NR 81337 5-4-4875 REVISION NR C DTD 09/24/2013 PART PIECE NUMBER: 5-4-4875
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-4-4875 REVISION NR DTD 10/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-26-T-3995
SECTION B
PR: 7017539793 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017539793 0001 EA 3.000
NSN/MATERIAL:5975017140946
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
MARKFOR
W80BTZ
0068 CS BN CO A COMPOSITE
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
SPE4A0-26-T-3995
SECTION B
PR: 7017539793 PRLI: 0001 CONT’D
M/F: (TCN) W80BTZ61950111
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE4A0-26-T-3995 NSN/Part Number: 5975-01-714-0946 Quantity: 3 EA Purchase Request: 7017539793QTY: 3 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327110
New
DIBBS
Vacuum Toilet Bowl (Water Closet) Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
MOUNTING BASE, ELECTThe contract concerns the procurement of five mounting bases for electrical applications, identified by NSN 5975-01-686-6944, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition scale. Packaging must adhere to DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons or entities without prior authorization from the Department of State or Commerce; access is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The solicitation number is SPE4A7-26-T-587R, with a response deadline of July 29, 2026, and the place of performance is Cherry Point, North Carolina, with Jamiah Sutton designated as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 327110
New
DIBBS
PANEL, ELECTRICAL-ELThis contract specifies the procurement of a single electrical panel, part number 01-P55302R001 with NSN 5975-01-663-7812, to be delivered in one unit within twenty days to the USS Maryland SSBN 738 at FPO AE 09578. Delivery is FOB destination with no variance allowed in quantity, and both inspection and acceptance occur at the delivery point. The item must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and container codes, and all marking must adhere to MIL-STD-129 without special markings. Palletization follows DLA packaging requirements, and shipment must be sent via the fastest traceable means—parcel post is prohibited. Technical and quality requirements are governed by the DLA Master List referenced in the contract, and sampling inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated. The panel must be free of intentionally added mercury or mercury-containing compounds except in permitted exceptions such as fluorescent lamps and specialized instruments, which must include a secondary containment barrier as mandated by NAVSEA 5100-003D. All bare items require physical identification per RQ017, and the supplier must adhere to the DoD-authorized unit of issue. The contract is under solicitation SPE4A7-26-T-580N, with a response deadline of July 27, 2026, and the required delivery date is set for July 13, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 327110
New
DIBBS
Manufacture of Interior Glass Panel ComponentsThe contract involves the fabrication of interior glass panel components identified by NSN 1680016717942, requiring precise cutting, forming, tempering, and finishing processes to comply with aerospace or defense industry standards. The work must meet rigorous performance and quality requirements consistent with military specifications, ensuring the component's durability, safety, and reliability in high-stakes operational environments. The manufacturer is expected to adhere to strict quality control protocols throughout all stages of production, from raw material handling to final inspection. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 327110 indicating classification under glass product manufacturing. The contract was posted on July 17, 2026, and is associated with the award identification SPE4A526P1570. Although specific performance location details are not provided, the work is likely to be performed at facilities certified for defense-related manufacturing. All deliverables must be fully compliant with applicable defense specifications, and any deviation from the required standards could result in rejection or contractual penalties.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 327110
New
DIBBS
MOUNTING BASE, ELECTRICThe contract is for the procurement of 19 mounting bases for electrical equipment, identified by NSN 5975-01-445-6169 and part numbers 200-3202-00 and 822-0791-001, supplied by Honeywell International Inc. and Rockwell Collins Inc. The requirement is issued under solicitation SPE4A7-26-T-576G, a total small business set-aside with a NAICS code of 327110, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Delivery is FOB origin with zero variance allowed in quantity and must be completed within 159 days of award, targeting delivery by April 6, 2027, with an original ship date of December 31, 2026. The unit of issue is each, at a unit price of $19.00, resulting in a total contract value of $361. Inspection and acceptance occur at the destination, and all supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified under defined verification levels or AQLs. Packaging must adhere to DLA’s RP001 requirements, using commercial packaging per ASTM D3951 if non-hazardous, or TQ requirement IP025 if hazardous, while all labels and markings must comply with MIL-STD-129. Palletization and unit packing must meet specified DLA standards, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
DIBBS
ADAPTER, ELECTRICALThe contract pertains to the procurement of 15 electrical adapters, identified by part number M24758-2 and NSN 5975015845371, under solicitation SPE4A7-26-T-576E. Delivery is required within 162 days from the award date, with shipment originating at the supplier’s location and delivered FOB origin to the destination facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the delivery point, with zero tolerance for variance in quantity. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards, including ASTM D3951. Sampling must conform to MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; if hazardous under FED-STD-313, packaging must follow TQ requirement IP025, otherwise commercial packaging per ASTM D3951 applies. Palletization must adhere to DLA packaging guidelines. The unit of issue is each, with a total contract value of $225.00. The supplier must meet all DLA logistics directives, including shipment coordination under DLAD Proc Note C19 and C20, and deliver no later than January 3, 2027, despite the original required delivery date of August 28, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
DIBBS
PANEL, ELECTRICAL-ELThe contract specifies the procurement of one electrical panel, identified by NSN 5975-01-649-0897 and commercial part number RM4, supplied by approved vendors including Cooper Electric Inc, Security Equipment Supply Inc, and Masterclock Inc. This is a commercial off-the-shelf item governed by the DLA Master List of Technical and Quality Requirements, which override any competing standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling standards, with hazardous material packaging governed by TQ requirement IP025 if applicable, and non-hazardous items packaged per FED-STD-313. Delivery is required FOB origin within 20 days of contract award, with no variance permitted in quantity. Inspection and acceptance occur at destination, and shipping must be performed via traceable freight methods—parcel post is prohibited. The destination for delivery is the Naval Undersea Warfare Center Division Newport, with a freight address listed for official receipt. The required delivery date is July 9, 2026, and the solicitation number is SPE4A7-26-T-576A, issued under a federal procurement framework with a NAICS code of 327110. The contract unit of issue is each, priced at $1.00, with total price of $1.00. All documentation and compliance must adhere to DLA policies and federal supply directives.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
New
Federal
59--MOUNTING BASE,ELECTRICThe U.S. Department of Defense, through DLA Aviation, is seeking quotations for 19 mounting bases, electric, identified by NSN 5975014456169, under a total small business set-aside solicitation with NAICS code 327110. This procurement is conducted via a Request for Quote (RFQ) that is available exclusively online through the SAM.gov portal; no hard copies will be provided, and no specifications, plans, or drawings are available to offerors. Delivery is required to DLA Distribution at location W1A8, with a deadline for acceptance set at 159 days after award. Only approved sources, identified by the vendor codes 13499 and 22373, are eligible to respond, and all quotes must be submitted electronically by the response deadline of July 24, 2026. Responsible small business concerns are encouraged to submit timely quotes, as any received within the deadline will be considered. The primary point of contact for inquiries is listed through DibbsBSM@dla.mil, with additional guidance directing potential offerors to the official DIBBS solicitation portal for full document access.
DLA Aviation

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 327110
DIBBS
RACK, ELECTRONIC JUNThis contract specifies the procurement of two electronic rack units identified by NSN 5975-01-707-0422 and part number TJT703020 from AMPHENOL PCD INC, classified as a commercial off the shelf item. The delivery is due within 20 days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to meet MIL-STD-2073-1E standards including specific preservation, wrapping, and container codes. Marking must follow MIL-STD-129 with no special marking required, and palletization must comply with DLA packaging requirements. The delivery address is N42420 LCSRON 1 DET MPSF NBVC in Port Hueneme, CA, and shipment must be made via the fastest traceable means, explicitly prohibiting parcel post. The contract references the DLA Master List of Technical and Quality Requirements for applicable specifications and incorporates controlled defense information. The unit of issue is each, with a total price of $2.00 per unit. The solicitation number is SPE4A7-26-T-574D, issued by the Department of Defense under ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 23, 2026. The NAICS code is 327110 and the place of performance is in Port Hueneme, CA. The primary point of contact is Dedrick Benson at DLA, reachable by phone or email. Government use identifiers include IPD 06, DIC A4A, DIST 9B, ADV 2L, and FC LN. The original required delivery date is April 24, 2026, and the project identifier is EP5 TP 2. The material is to be shipped using the government-supplied freight shipping address with supplier add code YSASEB and signature A, and all documentation aligns with DLA’s eProcurement standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 327110
SLED
De-centralized Manufacturing of Low-Cost, Sustainable Cementitious BindersThe agreement aims to advance a decentralized manufacturing system for sustainable, low-carbon cementitious binders that can replace up to 90 percent of traditional Portland cement in ready-mix concrete production. This initiative leverages industrial waste and natural pozzolans combined with C-Crete’s proprietary binder to drastically reduce the carbon footprint of concrete manufacturing while maintaining structural performance. The pilot facility will be located in San Leandro, California, serving as a proof-of-concept for widespread adoption by cement and concrete suppliers across the state, with the goal of enabling a scalable, economically viable alternative to conventional cement. The project operates under the State of California Energy Commission, with primary oversight managed by Neeva Benipal as Commission Agreement Manager and Rouzbeh Savary from C-Crete serving as Project Manager. The initiative aligns with California’s environmental objectives and is exempt from CEQA review based on staff recommendations. The pilot will test the technical and operational feasibility of decentralized production, empowering local ready-mix operations to produce binder materials on-site or regionally, reducing transportation emissions and supply chain dependencies. The timeline is set for the project to be pursued starting July 7, 2026, and the effort is intended to catalyze broader industry transition toward low-emission construction materials.
Energy Commission

POSTED

16 days ago

DEADLINE

N/A
View Details
NAICS: 327110
SLED
Ceramic Nest Module Supply and InstallationThe contract entails the supply and installation of 75 new ceramic nest modules and the retrofitting of 45 existing seabird nests with elevated sunshields to enhance durability and climate resilience on Año Nuevo Island. These nesting structures are specifically designed to protect seabird populations from rising temperatures and environmental stressors by providing stable, long-lasting nesting habitats. The ceramic materials ensure resistance to erosion, salt exposure, and extreme weather conditions typical of the coastal environment. All work must be completed in accordance with ecological guidelines to minimize disruption to nesting species and their natural behaviors. The project is classified under NAICS code 327110, indicating it involves the manufacturing of ceramic products, and is structured as a subcontract under the California Department of Parks and Recreation. The performance location is designated with zip code 94060, corresponding to Año Nuevo Island, where all installations must occur. The solicitation was posted on July 6, 2026, and the effort is part of a broader initiative to conserve and restore critical seabird breeding habitats under the state’s conservation and climate adaptation mandates. All materials and installation methods must meet specified environmental and durability standards to ensure the long-term success of the nesting program.
California Parks and Recreation, Department of

POSTED

17 days ago

DEADLINE

N/A
View Details
NAICS: 327110
DIBBS
Marine Toilet Bowl (Vitreous China) Supply
Defense Logistics Agency

POSTED

21 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332991
New
DIBBS
BEARING, ROLLER, TAPEREDThe contract pertains to the procurement of two tapered roller bearings with NSN 3110-01-510-0315, subject to strict domestic sourcing requirements under DFARS 252.225-7016, mandating that each bearing be manufactured in the United States, its outlying areas, or Canada, with over 50% of the cost of all components—rolling elements, retainer, inner race, or outer race—originating from these regions. Contractors must submit a completed Declaration on the Domestic/Foreign Nature of Materials via the DLA Foreign Bearing website; failure to provide this document disqualifies the quote. The bearings must comply with DLA packaging standards per RP001 and MIL-STD-2073-1E, including preservation per MIL-DTL-197M, which dictates protective lubrication and packaging methods based on bearing type and closure, and requires quality assurance adherence at the contractor’s facility. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except in specific exempted applications such as functional batteries, fluorescent lamps, or weapon systems, with portable devices containing mercury requiring shockproof design and a secondary containment barrier as defined by NAVSEA 5100-003D. Item Unique Identification is not required per the service customer’s request, and the items are to be delivered FOB origin within five days with no variance allowed in quantity. Inspection and acceptance occur at destination, and all marking must follow MIL-STD-129 with special codes as specified. The solicitation is a total small business set-aside under NAICS 332991, with a response deadline of July 30, 2026, and is issued by the Department of Defense’s Aviation Supply Chain ESO Buy Unit.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to the procurement of a single cable assembly identified by NSN 6150-01-458-9060 and part number 13230E5921-102, with a delivery requirement of five days FOB origin. The item must fully comply with technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, and all packaging must adhere to MIL-STD-2073-1E standards, including marking per MIL-STD-129 and palletization per DLA packaging guidelines. Sampling for inspection follows MIL-STD-1916 or an equivalent zero-based plan, with critical attributes requiring zero non-conformances and assigned verification levels or AQLs as specified. The contractor is required to implement Cybersecurity Maturity Model Certification Level 2 self-assessment and ensure physical identification of the item per applicable directives, with covered defense information protocols enforced. The cable assembly is to be delivered to Camp Humphreys in Pyeongtaek, South Korea, under a government shipment designation RDD 999/NMCS, with freight and transportation governed by specific DLA procedural notes. The contract includes a fixed quantity of one unit at a unit price of one dollar, with no variance allowed in delivery quantity, and the original required delivery date is July 17, 2026. The solicitation number is SPE4A0-26-T-3996, issued by the Department of Defense’s Aviation Supply Chain Esoc Buys office, with Danita Davis as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PIThis contract specifies the procurement of a KULITE SEMICONDUCTOR PRODUCTS INC transducer, motional pickup, part number IPTE-230-1000-5000G, with NSN 6695-01-455-4464, under solicitation SPE4A0-26-T-3994. Four units are required to be delivered within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using preservation method 10 and packaging code U. All packaging and preservation materials are strictly prohibited from containing mercury or mercury compounds, consistent with NAVSEA 5100-003D guidelines, and any functional mercury use in sensors or instruments must include a secondary containment barrier. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the strictest verification levels. The item is designated as a critical application item, and documentation requirements for source approval are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Delivery is to the Carrier Outfitting Matl Support Center in Suffolk, VA, with freight shipping required—not parcel post—and shipment must occur by the fastest traceable means. The required delivery date is July 17, 2026, and contract data indicates federal procurement under NAICS code 334519 by the Department of Defense, with Danita Davis as the primary point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKETThis contract is for a single gasket unit identified by NSN 5330-01-551-7408, with a delivery requirement of five days after delivery order. The solicitation number is SPE4A0-26-T-3999, issued on July 22, 2026, with responses due by July 30, 2026, under NAICS code 332722. The procurement is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance located at Fort Campbell, Tennessee. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, including specific mandates for supply chain traceability documentation retention under DLAD Procurement Note C03 from August 2016, and requirements for physical identification and marking of the bare item. Government identification must be removed from non-accepted supplies, and packaging must meet DLA standards. While unique item identification is not required per the service customer’s request, a stable base drawing essential for performance will be provided to the contractor within 30 days of award, and failure to receive it must be immediately reported to the contracting officer. Point of contact is Danita Davis at the provided email and phone number.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SHOULDERED
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BUS, CONDUCTOR
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
ARM, POSITION FEEDBA
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details