Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLUG, MACHINE THREAD

Active
SPE4A7-26-T-561FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifications pertain to a machine thread plug identified by part number 23018085 and NSN 5365-01-223-3673, with a required quantity of 277 units to be delivered within 290 days under solicitation SPE4A7-26-T-561F. The item must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all packaging must adhere to MIL-STD-2073-1E with specific preservation methods including dry and clean conditions, while marking follows MIL-STD-129 with no special marking codes. Delivery is FOB origin with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The item must be palletized in compliance with DLA packaging standards and shipped to the designated delivery address in New Cumberland, Pennsylvania. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor is subject to DLA's cybersecurity requirements, including a CMMC Level 2 self-assessment, and must comply with covered defense information protocols. All technical data and revisions reference drawings dated 1983 and 1984, and the unit of issue is each, with pricing and contractual terms tied to the specified purchase request number. The contract mandates adherence to all DLA procedural notes regarding transportation and initial delivery routing.

General Info

Procurement of 277 machine thread plugs via DLA solicitation for defense use, bids due July 16, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-561F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Erica Adams
contact@example.gov

Full Description

Show more
PLUG,MACHINE THREAD
PLUG,MACHINE THREAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALLISON TRANSMISSION INC 73342 P/N 23018085
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 73342 23018085 REVISION NR DTD 08/22/1983 PART PIECE NUMBER: 23018085
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 70040 GM4342M REVISION NR DTD 12/01/1984 PART PIECE NUMBER:
SPE4A7-26-T-561F
SECTION B
PR: 7017227584 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017227584 0001 EA 277.000
NSN/MATERIAL:5365012233673
DELIVERY (IN DAYS):0290
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/03/2027 Original Required Delivery Date:05/03/2027
SPE4A7-26-T-561F
SECTION B
PR: 7017227584 PRLI: 0001 CONT’D

SPE4A7-26-T-561F NSN/Part Number: 5365-01-223-3673 Quantity: 277 EA Purchase Request: 7017227584QTY: 277 Delivery: 290 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
CRANK, HANDThe contract pertains to the procurement of a CRANK, HAND with NSN 5340-01-492-7615, for a quantity of nine units at a unit price of $9.00, totaling $81.00. Delivery is required FOB origin within 169 days from the contract award, with no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must comply with DLA's Master List of Technical and Quality Requirements, which supersede any conflicting specification standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA’s RP001 requirements, with hazardous materials packaged according to TQ requirement IP025 and non-hazardous materials following ASTM D3951, subject to the precedence of DLA’s technical standards. All packaging and labeling must conform to MIL-STD-129, and palletization must meet DLA’s packaging guidelines. The unit of issue is each, and the quantity per unit pack is one. The item must be delivered to DLA Distribution Red River at the designated receiving facility in Texarkana, Texas. The original required delivery date was October 14, 2026, with a need ship date of January 13, 2027, under solicitation SPE7L1-26-T-844K, issued by the Department of Defense’s Land Supply Chain. The solicitation closed on July 27, 2026, and all compliance, documentation, and logistical requirements must be met in accordance with applicable DLA procedures and federal standards.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOPThe contract pertains to the procurement of two CLAMP, LOOP units with NSN/Part Number 5342-01-674-0752, issued under solicitation SPE4A7-26-T-576P by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026, and requires delivery within ten days of award. The item contains technical data subject to U.S. export controls under either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior government authorization. Unauthorized export or transfer is strictly prohibited, and DFARS 252.225-7048 governs compliance. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire, and have received explicit approval from DLA, are permitted to handle this data. The place of performance is Fort Hood, Texas, with Keyanna McNeil-Johnson listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, COTTERThe contract is for the procurement of one unit of a PIN COTTER identified by NSN 5315-01-517-2310 under solicitation SPE4A0-26-T-3903, with a required delivery date of July 13, 2026, and a delivery window of five days from award. The item must be packaged according to ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory compliance with MIL-STD-129 for marking and labeling. Packaging must be palletized per RP001, and sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II corresponding to critical, major, and minor, respectively, with unspecified attributes treated as major. The cotter must be marked with the applicable part numbers from Flint Hills Trading Company and McMaster-Carr Supply Co. The item is to be delivered FOB origin to the central receiving point at Fort Riley, Kansas, and shipped via fast, traceable means—parcel post is prohibited. The freight shipping address and mark-for address are both located at Fort Riley, with the shipment designated as RDD NMCS and linked to the tracking number W55GPJ61890087. The quantity is fixed with no variance allowed, and the unit of issue is HD. The contract specifies inspection and acceptance at destination, and all documentation must align with DLA procurement guidelines, including ANSI X12 unit conversions and applicable government-use codes for internal tracking.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of seven mounting brackets identified by NSN 5340-01-664-8738 under solicitation SPE7L1-26-T-841J, with a total delivery window of 211 days from award. The acquisition is a total small business set-aside under NAICS code 332510, restricted to qualified small businesses as defined by the SBA. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific controls such as non-tailored ISO 9001:2015 quality standards, qualified products and manufacturers lists, and mandatory removal of government identification from non-accepted supplies. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access associated technical data. The contract mandates CMMC Level 2 certification for any third-party assessors involved, and delivery is directed to New Cumberland, Pennsylvania, 17070-5002. All responses must be submitted by July 27, 2026, with point of contact Vittorio Tambaro at the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTRThis contract, issued under solicitation number SPE7L5-26-T-4213 by the Department of Defense through Land Supplier Ops Engines, requires the procurement of 12 units of a manual handle component identified by NSN 5340016994128, with a unit price of $12.00 and total value of $144.00. Delivery is mandated 216 days after the date of order, with a required delivery date of February 18, 2027, and must be shipped FOB origin to the designated receiving warehouse in Tracy, California. The contract mandates full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and specific container standards, with palletization governed by DLA’s RP001 packaging requirements. No ozone-depleting chemicals may be used in any part of the product or packaging, and substitute chemicals require prior approval unless explicitly authorized by specifications. All items are subject to inspection and acceptance at the destination point. The contractor must use Wide Area WorkFlow (WAWF) for all invoicing and receiving report submissions. The contract incorporates multiple Federal Acquisition Regulation (FAR) clauses, including those governing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguarding under NIST SP 800-171, changes, default, and prohibited internal confidentiality agreements. It further requires compliance with DFARS provisions related to covered defense information, prohibition of specified telecommunications equipment, and hazardous material labeling. Offerors must hold a valid Unique Entity ID and CAGE code and submit all proposals electronically through the DLA Internet Bid Board System by the July 21, 2026 deadline; paper submissions are not accepted. Evaluation factors are not specified, and the contract is structured as a fixed-price delivery order with zero variance allowed in quantity. The contractor must also comply with all socioeconomic representations, including small business status and joint venture disclosures, and must ensure all labor practices align with federal non-discrimination and whistleblower protections. No special marking or preservation materials are required beyond those specified, and all transport must conform to DLA’s procedural notes on first destination transportation.
LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details