Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLUG, VENT

Active
SPE7LX-26-U-008UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7LX-26-U-008U is a total small business set-aside request for quotations issued by the Department of Defense, Strategic Acq Program Directorate, for the procurement of vent plugs (NSN 5340017355049). This procurement may result in a unilateral Indefinite Delivery Contract with a maximum aggregate value of 350,000.00 dollars and a term of one year. The estimated annual requirement is 18 units, with a guaranteed minimum quantity of two and an estimated two orders per year. Deliveries are to be made to various CONUS and OCONUS DLA Depots with a delivery timeline of 116 days after receipt of order. Quotes must be submitted electronically via the DLA Internet Bid Board System by October 7, 2026. The contract is based on FOB Origin terms, while inspection and acceptance will occur at the destination. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with MIL-STD-129 and DLA procurement standards. Payment will be processed electronically through the Wide Area WorkFlow system. Offerors must adhere to the Buy American and Balance of Payments Program and provide necessary representations and certifications, including CMMC Level 2 self-assessment or third-party certification.

General Info

DoD small business contract for vent plugs, max $350,000, one year term.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

NAICS

332510 - Hardware Manufacturing

Place of Performance

USA

Set-Aside

SBA

Documents

1

SPE7LX-26-U-008U - Request for Quotations

PDF, High priority: read this first20 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Deadline changed

Response deadline changed from Oct 7, 2026 to Oct 13, 2026.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLUG,VENT
PLUG,VENT:
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-735-5049 Quantity: 18 EA Purchase Request: 1000244742QTY: 18 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Pintle Tee Hinge Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 294 pairs of Pintle Tee Hinges for prime contractors supporting the DLA Weapons Support Land Supply Chain. The hinges must be fabricated from zinc-plated wrought steel in accordance with ANSI/BHMA A156.20 standards. Quality control requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331, with packaging and marking adhering to ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment. Completed goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 332510.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supply of Mounting Bracket (PN 52C1387-1)This subcontract involves the procurement or manufacture of one Mounting Bracket, part number 52C1387-1 and NSN 5340-00-114-2274, to support DLA Weapons Support Land Supply Chain contracts. The item must be produced according to Curtiss-Wright Flow Control Service specifications and must adhere to the Buy American Act. The contractor is required to meet DLA Master List quality requirements RA001 and ensure the removal of non-accepted government identification as per RQ011. Delivery of the bracket is designated as FOB Origin. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Single Leg Wire Rope Assemblies (NSN 4010008494306)This subcontract involves the manufacture and supply of single leg wire rope assemblies, specifically Sikorsky part number 6430-61034-041, for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. All fabrication must adhere to the DLA Master List of Technical and Quality Requirements (RA001), and finished products must be packaged according to ASTM D3951 and MIL-STD-129 standards for delivery to Fort Carson, Colorado. To be eligible, providers must hold either SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The opportunity falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must submit their responses by October 15, 2026.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Fabrication of Electronic Equipment Hardware Kit (NSN 5340-01-641-1625)This subcontract involves the fabrication and assembly of one electronic equipment hardware kit under NSN 5340-01-641-1625 for the DLA Weapons Support Land Supply Chain. The work must be performed according to specific technical drawings 80063 A3297184, 80063 A3288030, and 80063 ECP-PM18-032, with a strict requirement that no hexavalent chromium or Class I ozone-depleting chemicals are used during the manufacturing process. The project is categorized under NAICS code 332510 and will be performed in Fort Bragg. Due to the nature of the technical data involved, the contractor must hold US/Canada Joint Certification Program certification for ITAR and EAR compliance. The response deadline for this opportunity is October 19, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Precision Manufacturing of Door Handles (NSN 5340-01-316-7038)This subcontract involves the precision manufacturing of five specialized door handles under NSN 5340-01-316-7038 for the DLA Weapons Support Land Supply Chain in support of the CCDC-CBC. The fabrication process must strictly adhere to specifications set by the CCDC-CBC, Army ESA, and SICA BG, with a specific prohibition against the use of additive manufacturing. Performance of the contract will take place in New Cumberland. To be eligible, the contractor must maintain several critical certifications, including CMMC Level 2 and US/Canada Joint Certification Program certification. Additionally, full compliance with DFARS 252.204-7012 is required. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Precision Machining and Manufacture of Sleeve Bearings (NSN 3120008814196)This subcontract involves the precision machining and manufacture of 289 sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The bearings must be fabricated according to TDP Rev A Gen 2 and Part Number 114S2613-21 REV U, while strictly adhering to Reference QAP 13873. A critical requirement of the project is the completion of First Article Testing in Richmond, Virginia, conducted in coordination with a Government Quality Assurance Representative. The contractor must utilize precision machining equipment and ensure all materials comply with the Buy American Act and the Berry Amendment. Compliance with ISO 9001:2015 and DFARS 252.204-7012 standards is mandatory. Performance will take place in New Cumberland, Pennsylvania, culminating in the delivery of 289 completed bearings.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Annular Ball Bearing ManufacturerThis subcontract involves the manufacture of six high-precision annular ball bearings, identified by NSN 3110-00-554-5925, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must utilize Grade 52100 bearing steel or ASTM A295 Grade 24, adhering strictly to SKF steel specifications 471563C and 472921, CID A-A-59582D Revision D, and Reference QAP 13873 QAP-B02 Revision B. The contract falls under NAICS code 332510 and mandates strict compliance with DFARS 252.225-7016 to ensure domestic sourcing of materials. Interested parties must respond by October 15, 2026, to meet the requirements set forth by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L1-27-T-0642
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-27-T-0912
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-U-4394
Solicitation SPE4A6-26-U-4394 is a total small business set-aside for the procurement of solid rivets, specifically part number NAS1097KE3-12 (NSN 5320011788407). This is a unilateral Indefinite Delivery Contract (IDC) with a maximum value of 350,000.00 USD and an estimated annual quantity of 9,232 units. The items are classified as commercial critical application items and must be manufactured in accordance with the current revision of the NAS1097 part standard and reference drawing 13873 EI-011788407. Delivery is required within 93 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. Quality assurance is governed by a zero-based sampling plan following MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List requirements and RP001 palletization standards take precedence. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-27-T-0807
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-27-T-0930
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7LX-26-U-006F
Solicitation SPE7LX-26-U-006F is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of preformed packing, identified by NSN 5330-01-210-2928. The government seeks a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 USD for an estimated annual quantity of 105 units. Delivery is required within 97 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The award will be granted to a responsible offeror based on price and conformity to the specified terms and conditions. Technical requirements mandate that items be free of asbestos and prohibited from using Class I ozone depleting chemicals or intentionally added mercury. Due to UV sensitivity, products must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Quality assurance requires a Certificate of Conformance before shipment and a manufacturer inspection system complying with SAE AS9003 or ISO 9001. Additionally, the contractor must adhere to strict cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012, and utilize the Wide Area WorkFlow system for all electronic invoicing and payment requests.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7LX-26-U-007S
Solicitation SPE7LX-26-U-007S is a Request for Quotations issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate, for the procurement of threaded spacing standoffs, also described as electrical-mechanical posts. The item is identified by NSN 5340-01-284-8497. This procurement may result in a Unilateral Indefinite Delivery Contract (IDC) for a one-year period with a maximum contract value of 350,000.00 dollars. While the estimated annual quantity is one unit, this is an estimate and not a guaranteed purchase. Quotations were due by October 7, 2026, with delivery expected 77 days after receipt of order. The contract mandates strict adherence to packaging and marking standards, requiring MIL-STD-129 for labeling and ASTM D3951 for non-hazardous materials, while hazardous materials must follow TQ requirement IP025 and the Hazard Communication Standard. Palletization must comply with DLA packaging requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports. Additionally, the contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333612
New
DIBBS
RATCHET WHEEL
Solicitation # SPE7LX-26-U-006H
Solicitation SPE7LX-26-U-006H is a Request for Quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of Ratchet Wheels used on accessory drive gearboxes for Garrett turbine engines. This is a Total Small Business Set-Aside under NAICS code 333612, structured as a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. The requirement is for an estimated quantity of 253 units of NSN 3020010039124, with a delivery window of 106 days after order. The items are identified as commercial critical application items, and the contract specifies FOB Origin terms with inspection and acceptance occurring at the destination. Compliance requirements include adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Contractors must meet Cybersecurity Maturity Model Certification CMMC Level 2 Self-Assessment standards and comply with Covered Defense Information regulations. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates the DLA Master List of Technical and Quality Requirements and mandates compliance with the Buy American Act and the Berry Amendment for domestic sourcing. Quotations were due by October 7, 2026.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-008D
Solicitation SPE7LX-26-U-008D is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of Flush Catches, identified by NSN 5340013190336. This is a total small business set-aside under NAICS code 332510, structured as a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 USD. The estimated annual requirement is 294 units, with a delivery timeline of 71 days after order. While the schedule specifies FOB Origin, the solicitation form mentions FOB Destination, and final ship-to addresses will be provided on individual delivery orders. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging and palletization under RP001 and MIL-STD-129. Hazardous materials must follow FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet ASTM D3951 standards. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for individual items, and offerors are encouraged to provide quantity ranges to accommodate demand volatility.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-005R
Solicitation SPE7LX-26-U-005R is a request for quotations issued by the DLA Land and Maritime Strategic ACO Program Directorate for the procurement of knobs, identified as NSN 5355000721991 and part number 247039 from C&H Hydraulics Inc. This is a Women-Owned Small Business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars. The requirement is for an estimated quantity of 36 units, which are designated as critical application items. Quotations are due by October 7, 2026, and the delivery period is specified as 191 days after order. The contract requires strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed through the Wide Area WorkFlow system. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material labeling regulations. Award will be based on price quotes from qualified suppliers, and the buy may be eligible for automated award.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336350
New
DIBBS
SPINDLE, WHEEL, DRIVING-
Solicitation # SPE7LX-26-U-006V
Solicitation SPE7LX-26-U-006V is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of driving and non-driving wheel spindles, identified by NSN 2530-01-293-8574 and Meritor Industrial Products part number 3266-Z-780. This procurement is a total small business set-aside intended to result in a unilateral Indefinite Delivery Contract for a one-year period, with a contract maximum value of 350,000.00 dollars and an estimated annual quantity of 32 units. Delivery is required within 78 days after receipt of order, with terms specified as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 and RP001. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials must follow TQ requirement IP025 and FED-STD-313. Technical and quality requirements from the DLA Master List take precedence over general packaging standards. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Berry Amendment and Buy American Act. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7LX-26-U-006D
Solicitation SPE7LX-26-U-006D is a request for quotations issued by the Defense Logistics Agency for the procurement of three rigid connecting links under NSN 3040-01-040-1544. This effort is designated as a Women-Owned Small Business set-aside and may result in a Unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars. The required delivery timeframe is 207 days after award, with terms established as FOB Origin. Inspection and acceptance will also occur at the origin, requiring the manufacturer to maintain a quality system compliant with SAE AS9003 or ISO 9001. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and compliance with ASTM D3951 and MIL-STD-129 for packaging and marking. Significant security and regulatory constraints are in place, including CMMC Level 2 certification, safeguarding of covered defense information, and strict export controls under ITAR and EAR. Additionally, the procurement involves a Boeing Rights Guard License Agreement, imposing specific non-disclosure and data destruction conditions on the technical data package. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333612
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7LX-26-U-006E
Solicitation SPE7LX-26-U-006E is a request for quotations issued by the DLA Land and Maritime Strategic Acq Program Directorate for the procurement of shoulder shafts, identified by NSN 3040011804101. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 6 units. The item is designated as a critical application item and a restricted source item, requiring engineering source approval by the government design control activity. Delivery is required within 296 days after receipt of order, with FOB Origin terms and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment, Covered Defense Information protocols, and specific sampling methods under MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with each unit package requiring the NSN, contract number, part number, and both contractor and manufacturer CAGE codes. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with domestic sourcing restrictions such as the Buy American Act and the Berry Amendment. Quotations must be submitted via the DIBBS portal.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
MOUNT, RESILIENT, UTILIT
Solicitation # SPE7LX-26-U-007E
Solicitation SPE7LX-26-U-007E is a Total Small Business Set-Aside issued by the Department of Defense, DLA Land and Maritime Strategic Acquisition Program Directorate, for the procurement of general purpose resilient utility mounts (NSN 5340015899949). This unilateral Indefinite Delivery Contract has a maximum value of 350,000.00 USD and an estimated annual quantity of 66 units. The contract specifies delivery terms as FOB Origin with inspection and acceptance occurring at the destination within 103 days after the order. The contractor must adhere to strict packaging and marking standards, with DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951 for non-hazardous materials and IP025 for hazardous materials. All shipments must be labeled according to MIL-STD-129 and palletized per RP001. Compliance with the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012 is required. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offers produced using additive manufacturing are ineligible for award.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
EXPANDER, SEAL
Solicitation # SPE7LX-26-U-006G
Solicitation SPE7LX-26-U-006G is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 27 Expander Seals (NSN 5330-01-209-7565, Part Number 5035534-10). This requirement may result in a unilateral Indefinite Delivery Contract (IDC) for a one-year period with a maximum value of 350,000.00 USD. The items are classified as commercial products and must be delivered within 99 days after order. Inspection and acceptance will occur at the destination, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Strict technical and material standards apply, including a total prohibition on asbestos, mercury, and Class I ozone-depleting chemicals. To prevent deterioration from ultraviolet rays, items must be packaged and sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking must adhere to MIL-STD-130N and MIL-STD-129. Additionally, the contractor must comply with CMMC Level 2 certification requirements, safeguard covered defense information per DFARS 252.204-7012, and utilize the Wide Area WorkFlow (WAWF) system for all electronic invoicing and payment requests.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333612
New
DIBBS
INSERT, FLEXIBLE COUPLI
Solicitation # SPE7LX-26-U-005S
Solicitation SPE7LX-26-U-005S is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of flexible coupling inserts, specifically spider type cushion, oil resistant Buna-N for Lovejoy type L110. The requirement is for an estimated quantity of 69 units (NSN 3010000664726), identified as critical application items. This procurement may result in a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. Delivery is required within 34 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires compliance with MIL-STD-129 for marking and RP001 for packaging. Bare items must be marked with the contract number, NAWC CAGE, and part number, while also meeting NAVAIR aircraft launch and recovery equipment traceability requirements. A critical safety restriction prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-007H
Solicitation SPE7LX-26-U-007H is a request for quotations issued by the Department of Defense Strategic Acquisition Program Directorate for NSN 5331011893822 O-rings. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a maximum aggregate value of 350,000.00 dollars is reached. The estimated annual requirement is 172 units, with a guaranteed minimum quantity of 25 units. This is a Qualified Products List item, and all quotes must be submitted electronically via the DLA Internet Bid Board System by October 7, 2026. The contract specifies FOB Origin shipping to various CONUS and OCONUS DLA Depots, with inspection and acceptance occurring at the destination. Technical requirements include adherence to MIL-STD-129 for marking, RP001 for palletization, and MIL-STD-1916 or ASQ H1331 for sampling. Offerors are encouraged to provide quantity ranges to accommodate demand volatility. Key regulatory compliance includes the Berry Amendment, the Buy American Act, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system.
Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS