Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLUG, VENT

Active
SPE7L1-26-U-0466Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 113 units of a PLUG, VENT with NSN 5340-01-687-6611 under solicitation SPE7L1-26-U-0466, issued by the Department of Defense’s Land Supply Chain. The solicitation was posted on July 12, 2026, with a response deadline of July 27, 2026, and requires delivery within 140 days after award. Technical and quality standards referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless superseded by an amendment. Source approval documentation is mandatory, and non-accepted supplies must have all government identification removed prior to disposition. The primary point of contact for inquiries is Jennifer Payne at the DLA, reachable via email and phone. The procurement falls under NAICS code 332510 and is classified as a federal acquisition with no set-aside designation.

General Info

Procurement of 113 PLUG VENT units under DLA solicitation with 140-day delivery deadline and source approval required.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-U-0466 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jennifer Payne
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLUG,VENT
PLUG,VENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5340-01-687-6611 Quantity: 113 EA Purchase Request: 1000237340QTY: 113 Delivery: 140 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
CLAMP, LOOPThe contract pertains to the procurement of 43 units of CLAMP, LOOP with NSN 5340-01-440-6017 under solicitation SPE7L1-26-T-827U, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to strict cybersecurity requirements, mandating that the vendor be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization, ensuring compliance with defense-grade information security standards. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Export control regulations under ITAR or EAR apply to the technical data associated with this item, prohibiting any disclosure or export to foreign persons without prior authorization from the Department of State or Commerce, and restricting access only to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. Delivery is required within 165 days of award, with performance based at New Cumberland, Pennsylvania, 17070-5002. The solicitation opened on July 12, 2026, with responses due by July 23, 2026, and the NAICS code 332510 classifies this as a manufacturing procurement. All communications must be directed to Michael Nordahl at DLA’s primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of a retaining ring with NSN 5325-01-289-1864 and part number C611.049 from CORTLAND INDUSTRIAL LLC, requiring delivery of nine units within five days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and packing must comply with ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item must be delivered FOB origin to the Fleet Readiness Center Southeast in Jacksonville, Florida, with freight shipping directed to a specified address. Parcel post is strictly prohibited; shipments must use the fastest traceable means. Inspection and acceptance occur at the destination, with no tolerance in quantity variance. The contract number is SPE4A6-26-T-05MB, with a required delivery date of July 8, 2026, and the sole point of contact is Duane Watkins.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THRThe contract pertains to the procurement of two machine thrust bushings with NSN 5365-12-190-8049, specified under solicitation SPE4A7-26-T-565C, requiring delivery within five days of award FOB origin. The items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling and inspection governed by MIL-STD-1916 or comparable zero-based plans, enforcing zero non-conformances unless otherwise contracted. Attributes are assigned verification levels or AQLs based on criticality, and manufacturers may choose between attribute or variable inspection methods. Packaging must adhere to MIL-STD-2073-1E with prescribed methods for preservation, wrapping, and intermediate containment, and marking must follow MIL-STD-129 without special codes. The bushings are to be delivered to the Egyptian Navy Armament Department in Alexandria, Egypt, via the designated freight forwarder, Amentum Warehouse in Fredericksburg, VA, with no variance allowed in quantity. The unit of issue is each, with a total price of $2.00 per unit, and the delivery deadline is set for July 21, 2025, with government-specific identifiers and codes for tracking and logistics.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVETThe contract is for the procurement of 625 units of a threaded pin-rivet collar designated as NSN 5320-00-797-2646, with the part number HL70-12, sourced from approved suppliers including SPS Technologies LLC, Howmet Global Fastening Systems Inc, and others. The item is classified as a critical application component under Northrop Grumman Systems Corporation’s specification GN512H6, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards unless explicitly overridden. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 requirements, and no government identification may be removed from non-accepted supplies. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, and attributes are assigned verification levels or AQLs as specified. Delivery is required within 287 days from contract award, FOB origin, with no variance allowed in quantity. All items must be properly marked, labeled, and packaged in accordance with federal standards, and transportation logistics follow DLAD procedural notes C19 and C20. The delivery address is Tinker AFB, Oklahoma, and the point of contact is Samantha Hopkins from the DLA Commodities Division. The solicitation was issued on July 12, 2026, with responses due by July 20, 2026, under contract number SPE4A6-26-T-05LG.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, COTTERThe contract pertains to the procurement of a PIN COTTER identified by NSN 5315-00-187-9488, with a quantity of one HD, to be delivered within 20 days from the date of award under solicitation SPE4A6-26-T-05KP. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking without special codes. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, and directed to USS KEARSARGE LHD 3, FPO AE 09534. Mercury and mercury-containing compounds are strictly prohibited in any component, preservation, packaging, or marking unless explicitly exempted for functional uses such as specified batteries, instruments, sensors, weapon systems, or NAVSEA-released chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs as defined by specification. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List effective on the solicitation or award date, depending on acquisition size. The supply must conform to NASM24665 Rev 03 and ASME B18.8.1 (2019 reaffirmed) standards, with certification of conformance authorized unless superseded by a quality assurance letter of instruction. The required delivery date is June 24, 2026, and performance is subject to DLA procedural notes C19 and C20 for transportation logistics.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details