Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Plumbing and Piping Systems Installation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220
New
WOJC - Multi-Building Plumbing Leak Repair Project
Solicitation # WOJC – Multi-Building Plumbing Leak Repair Project
Education and Training Resources is seeking quotes for a subcontracting opportunity to perform multi-building plumbing leak repairs at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work includes replacing leaking shower P-trap drain pipes in Harris Hall dormitory Rooms 123 and 213, repairing a cracked drain pipe in the pipe chase of Room 216, and replacing approximately ten linear feet of leaking heat pipe in the Administration Building Wellness Department and King Hall. All work must conform to the Massachusetts State Plumbing Code and International Plumbing Code, utilizing new commercial-quality materials suitable for hydronic heating service. The contractor is responsible for all cutting, patching, and debris removal to ensure the facility is returned to normal use at no additional cost to the center. Bids must be submitted by October 30, 2026, and must include a detailed cost breakdown, a proposed service schedule, and a quote valid for at least 60 days. Required documentation for submission includes a current SAM.gov UEI number and active registration, Massachusetts plumbing licenses, a W-9, a signed Vendor Acknowledgement form, and certificates of liability insurance. This solicitation is set aside for various small business categories, and award selection is at the sole discretion of ETR, based on factors beyond the lowest bid. Compliance with the Davis-Bacon Act, Service Contract Act, and OSHA safety standards is mandatory, with weekly certified payroll reports required. Depending on the final project value, payment and performance bonds may be required for contracts exceeding 35,000 dollars.
Westover Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 238220
New
CBP6585 Bldg. 22 HVAC Replacement
Solicitation # CBP6585
Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to remove and replace the HVAC equipment serving Building 22 at the San Diego Job Corps Center in Imperial Beach, California. This is a fixed-price, single lump sum contract with an estimated value between 0 and 25,000 dollars. The scope of work includes providing all labor, supervision, equipment, materials, and permits necessary for a complete operational replacement, as well as delivering two sets of operation and maintenance manuals and manufacturer warranties. Bids are due by October 28, 2026, and will be awarded based on overall best value. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. The project is set aside for small businesses under NAICS code 238220 and is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and certified weekly payroll. Bidders must submit a detailed cost breakout, proof of insurance, three professional references, and a completed MTC Supplier Packet including a W-9 and UEI number. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required, and the awarded contractor must provide performance and payment bonds totaling 100 percent of the contract price from a surety company with at least an A- rating. All work must adhere to OSHA safety standards, and payment applications must be submitted using AIA Documents G702 and G703.
San Diego Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 3 days
NAICS: 238220
New
MJCC EXHAUST FANS BLD. 1429
Solicitation # mjcc-exhaust-fans-bld-1429
The Muhlenberg Job Corps Center, operated by Insights Training Group LLC, is soliciting fixed-price quotes from qualified HVAC and mechanical contractors to restore the exhaust fan and louver systems in Building 1429, located in Kentucky. The project scope involves inspecting, repairing, and replacing critical components to ensure safe and functional operation. Key requirements include replacing failed louver actuators, control transformer fuses, and contactor coils, as well as installing new motors for exhaust fans 1, 2, 4, and 5. Additionally, the contractor must provide and install a missing motor, blade, and guard for exhaust fan 5. All work must adhere to applicable building codes, manufacturer requirements, and general HVAC practices. The contract will be awarded to a single responsible offeror based on technical acceptability and the lowest price. Proposals must include a detailed scope of work, line-item pricing for each of the eight exhaust fans, and separate pricing for system-wide replacements of thermostats, relays, and actuators. Submission requirements include a completed New Vendor Profile, W-9, proof of Kentucky state registration and licensing, and evidence of the ability to secure performance and payment bonding. Quotes are due by October 30, 2026, following a pre-bid site visit on October 5, 2026. Compliance with federal labor standards is mandatory, specifically the Davis-Bacon Act and Certified Payroll Wage Rate requirements. Contractors must submit weekly certified payroll records with every invoice to receive payment under net terms. Final payment is contingent upon the delivery of lien releases from all subcontractors and material suppliers. The project concludes with a substantial completion walk-through and a final acceptance inspection, requiring the contractor to provide all necessary training and maintenance manuals. Safety and environmental regulations, including OSHA, EPA, and the maintenance of Material Safety Data Sheets, must be strictly followed throughout the performance period.
Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 238220
New
Centennial Dry Sprinkler System & Compressor Replacement Services
Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services
Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project focuses on eliminating severe piping leaks and replacing failing infrastructure in Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The scope of work includes the demolition and removal of existing distribution piping and air compressors, the installation of a new code-approved piping network and properly sized compressor, and rigorous operational and leak testing. All work must adhere to NFPA 25 (2023 Edition) and other local, state, and national codes. The performance period is 30 consecutive business days following a written Notice to Proceed. Bids are due by December 1, 2026, and must be based on an overall best-value evaluation. Mandatory requirements for consideration include a physical site visit, a detailed cost breakout, and proof of insurance. For bids totaling $25,000 or more, a bid bond guarantee of 20% of the base bid from an A-rated surety company is required. This solicitation is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Awarded contractors must comply with Davis-Bacon Act prevailing wage rates for Idaho, submit weekly certified payroll reports, and adhere to various federal regulations, including FAR clauses regarding subcontractor disclosure for contracts exceeding $45,000 and mandatory Job Corps training and privacy breach notification requirements.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 238220
New
Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006
Solicitation # S26-006
Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), noting that the lowest price does not guarantee selection. Selected contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict center security and conduct rules, including a prohibition on fraternization with students. Required submission documents include a current W-9, a completed vendor questionnaire with UEI and NAICS codes, and applicable state licenses. Payment terms are Net 30 days upon completion and receipt of invoice.
Adams and Associates, Inc.

POSTED

about 5 hours ago

DEADLINE

in 15 days
NAICS: 238220
New
MJCC HVAC BLD. 1403-04 B HALL
Solicitation # mjcc-hvac-bld-1403-04-b-hall
Insights Training Group, LLC, on behalf of the Muhlenberg Job Corps Center in Kentucky, is soliciting fixed-price quotes for the installation of two 4-ton twinned split HVAC systems using R-454B refrigerant at Building 1403-04 B Hall. The scope of work includes the installation of minimum 17 SEER Trane condensing units, 95% AFUE high-efficiency gas furnaces, matching evaporator coils, a Honeywell Pro 8000 programmable thermostat with a remote sensor, and all necessary piping and condensate management. The project must be completed within 45 days of award, with all work adhering to manufacturer specifications, local codes, OSHA, and EPA regulations. To be considered technically acceptable, offerors must be registered and licensed in the State of Kentucky, verified through the SAM portal, and provide a minimum 90-day bid guarantee along with proof of ability to secure performance and payment bonding. Submissions must include a detailed fixed-price quote, a W-9, and a New Vendor Profile by October 30, 2026. Award will be granted to the responsible offeror with a technically acceptable quote and the lowest price. Contract administration requires strict adherence to the Davis-Bacon Act and certified payroll wage rate requirements. Contractors must submit weekly certified payroll and a signed Statement of Compliance with every invoice to receive payment under net terms. Additionally, contractors must provide Materials Safety Data Sheets for all products used and maintain a chemical application log. Final acceptance is contingent upon a successful walk-through by the center director, the provision of all operating manuals, and the delivery of lien releases from all subcontractors and suppliers.
Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 238220
New
Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)
Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units
The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work involves the removal and off-site disposal of twenty failed units and the installation of new Bosch 1-ton units or an equivalent model. The installation must include all necessary ducting, electrical, gas, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must install smoke dampers with fusible links in all vents leading into the plenum and ensure all materials used in the plenum are plenum rated. All work must comply with NFPA 101, NFPA 70, and all applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Proposals are due by November 7, 2026, and must include a safety and compliance process, detailed costs for labor and materials, equipment cut sheets, warranty information, and a requested payment schedule. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission of weekly certified payroll reports prior to invoice payment. Furthermore, any proposal exceeding 100,000 dollars will require payment and performance bonding for 100 percent of the contract value upon award. Final deliverables include the submission of operation manuals to the Facility Manager upon project completion.
Career Systems Development Corporation

POSTED

about 5 hours ago

DEADLINE

in 13 days

AI Contract Overview

Show more

This subcontract opportunity, titled Plumbing and Piping Systems Installation, is issued by the Department of Defense through the W6QM Micc-Ft Drum agency. The scope of work involves the installation of potable water, waste, vent, and storm drainage systems, ensuring all work is completed in accordance with applicable local and national codes. The project is categorized under NAICS code 238220. This opportunity is designated as a total set-aside for small businesses. Interested parties must submit their responses by the deadline of September 2, 2026. The solicitation was officially posted on August 25, 2026.

General Info

DoD small business subcontract for plumbing and piping installation due September 2, 2026.

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

NY

Set-Aside

SBA

Documents

This scope was carved out of W911S226U4241.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Custom US Army Recruiting Branded

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of potable water, waste, vent, and storm drainage systems in accordance with local and national codes.

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 333243
New
Federal
FS5 Analyzer
Solicitation # W911S227U0072
Solicitation W911S227U0072 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of a Valmet FS5 Analyzer and associated accessories. This acquisition is a Total Small Business Set-Aside under NAICS code 333243. The scope of work includes the delivery of the FS5 Analyzer (Part Number K12144) for analyzing fiber dimension, fines, coarseness, and curl, along with Measurement Packages A and B, Clean Chem Dexonex 26, and various supporting components such as a water treatment unit, manual defibrator, and a measurement accuracy verification kit. The government is seeking a brand-name or equal product, and any offeror proposing an equivalent must provide detailed descriptive literature and demonstrate that the product meets all salient physical and functional characteristics. The contract will be awarded to the responsible offeror whose proposal is deemed most advantageous based on price and technical evaluations. All quotes must be submitted through the PIEE Solicitation module, and failure to include the required Certifications and identification of country of origin in Attachment 1 will result in the offer being rejected as nonresponsive. Delivery is requested within 30 days on an F.O.B. destination basis. Key regulatory requirements include Item Unique Identification (IUID), safeguarding of covered defense information, and adherence to Buy American and sustainable product standards. Payment will be processed via Electronic Funds Transfer.
Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331210
New
Federal
COUPLING ASSEMBLY
Solicitation # W911S227U0077
Solicitation W911S227U0077 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of 20 new Quick Disconnect Coupling Assemblies, part number MS24333-10 or MS24333-A-10. This acquisition is a Total Small Business Set-Aside. The required assemblies must be made of anodized treated aluminum alloy, support a maximum operating pressure of 3000.0 psi for petroleum-based hydraulic fluid, and withstand temperatures up to 135.0 degrees Celsius. Key physical specifications include an overall length of 4.640 inches and a first fluid end connection tube diameter of 0.625 inches. The government is utilizing a brand name or equal evaluation process, meaning alternative products will be considered if they meet all salient physical, functional, and performance characteristics and are supported by descriptive literature and model identification. Quotes must be submitted exclusively through the PIEE Solicitation module to avoid being rejected as nonresponsive. Essential submission requirements include the completion of Attachment 1 regarding certifications and country of origin. The preferred delivery schedule is 30 days after receipt of order on an FOB Destination basis, and a Certificate of Conformance is mandatory at the time of shipment. Award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. The contract incorporates several standard federal clauses, including requirements for sustainable products, item unique identification, and safeguarding covered defense information.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
Federal
Scintillometer BLS900 Neo, Path Reduction Aperture, Power Supply, Standard and Tall Tripods
Solicitation # W911S227U0078
Solicitation W911S227U0078 is a Request for Quotation issued by the Department of Defense for the Meteorology Branch at White Sands Missile Range to procure a large-aperture dual-disk scintillometer system and associated accessories for atmospheric optical-path measurements. The primary requirement is for a SCINTEC BLS900 Neo system, though equal products will be considered if they meet the salient physical and performance characteristics and are supported by descriptive literature. The procurement includes one scintillometer system, one path-reduction aperture to enable measurement paths as short as 100 meters, two 110-120 VAC power supplies, two standard tripods at 1.80 meters, and two high tripods at 3.00 meters. All equipment must be new and unused, provided with protective cases, and delivered F.O.B. destination to White Sands Missile Range, New Mexico, preferably within 30 days. This acquisition is a Total Small Business Set-Aside under NAICS code 334519. Award will be based on the most advantageous offer considering price and technical factors. Offerors must submit quotes exclusively through the PIEE Solicitation module and include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. The contract incorporates several regulatory requirements, including the Buy American Balance of Payments Program, Item Unique Identification and Valuation, and cybersecurity safeguarding standards. Technical evaluations will verify the operational compatibility and completeness of the system, ensuring all cables, software, and documentation are provided for full functional operation.
Other Measuring and Controlling Device Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS