Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pneumatic Tube System Equipment Supplier

Active

Federal

Response Deadline12/16/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Pneumatic Tube System Equipment Supplier to support prime contractors on Department of Veterans Affairs Health Care System projects located in Hampton, Virginia. The selected provider will be responsible for the manufacture and delivery of essential system components, including blowers, stations, and tubing, ensuring all equipment is delivered directly to the project site. The contract requires strict adherence to healthcare facility standards and the provision of a manufacturer's warranty for all supplied hardware. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333998. Interested parties must submit their responses by the deadline of December 16, 2026.

General Info

SDVOSB subcontract for Pneumatic Tube System equipment for VA Health Care in Virginia.

Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Hampton, VA, 23667, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of 36C24627R0010.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Y1DA--590-27-120 Replace Pneumatic Tube System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineDec 16

Submission deadline

Response Deadline

12/16/2026, 10:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies pneumatic tube hardware and components for prime contractors on VA Health Care System projects, here in Hampton, VA. Manufactures and delivers blowers, stations, and tubing required for the system design. Requires compliance with healthcare facility standards and provision of manufacturer's warranty. Delivers all specified equipment and hardware to the project site.

Similar Contracts

Same NAICS industry code

Knuckle Boom Loader Fabrication and InstallationThis subcontract for Knuckle Boom Loader Fabrication and Installation involves the supply and installation of a knuckle boom loader system for prime contractors working on Harrison County Board of Supervisors projects. The scope of work includes engineering mounts, fabricating sub-frames, installing hydraulic knuckle boom arms, integrating hydraulic pumps and tanks, and conducting final load testing to deliver a fully integrated and operational loader truck. The project is managed by MPTAP in Mississippi and requires strict adherence to OSHA crane and hoist regulations as well as ASME B30.5 standards. The solicitation was posted on October 30, 2026, with a response deadline of November 3, 2026, falling under NAICS code 333998.

POSTED

about 8 hours ago

DEADLINE

Kit Assembly and Packaging ServicesThis subcontract for Kit Assembly and Packaging Services supports the DLA Weapons Support Land Supply Chain by providing final kitting, packaging, and marking for prime contractors. The selected provider will be responsible for gathering components, verifying counts, and ensuring all installation kits are fully assembled, marked, and palletized. All work must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 standards. A critical requirement for this engagement is demonstrated experience with Unique Item Identification marking. The project falls under NAICS code 333999 and is managed by the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance at the designated facility in zip code 17070-5002.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Roof Lifting Jack Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 20 completed and tested roof lifting jacks under NSN 7360-01-247-2367 for prime contractors supporting DLA Troop Support subsistence projects. The Department of Defense requires the jacks to be fabricated according to Basic Drawing 81337 5-13-4600 Revision J, utilizing a plain screw operating mechanism. Specific technical requirements include a retracted height of 49.0 inches and a travel distance of 40.0 inches. The contractor must ensure full compliance with TDP Rev A Gen 1 and adhere to MIL-STD-2073-1E packaging standards. This project falls under NAICS code 333998 and is managed by the Subsistence FSE Supply Chain. The response deadline for this opportunity is November 5, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Cylinder Tilt with Side Shift Assembly (NSN 2590-01-495-7222)This subcontract involves the procurement of one complete Cylinder Tilt with Side Shift assembly, identified by NSN 2590-01-495-7222, for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier operations. The assembly must be manufactured or procured in strict accordance with Terex Cranes Germany GmbH part number 53.0600.0800 specifications. Key compliance requirements include the implementation of IUID marking as mandated by MIL-STD-130 and DFARS 252.211-7003. Additionally, the provider is required to submit all necessary material certifications and process operation sheets to ensure quality and technical adherence. The opportunity is categorized under NAICS code 333999.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

SUBPLATE ASSEMBLY

Solicitation # SPE7M2-27-T-0276

Solicitation SPE7M2-27-T-0276 is a fixed-price procurement issued by the DLA Weapons Support Nuclear Reactor Program for 17 units of Subplate Assembly, identified by NSN 1720-01-049-2476 and part number MS20995C47. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of August 2, 2027, and an original required delivery date of October 31, 2027. Delivery is specified as FOB Origin. The procurement prohibits the use of additive manufacturing processes unless specifically authorized by the contracting officer. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be approved by the DLA controlling authority to access the data. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while hazardous materials must comply with the Hazard Communication Standard. The solicitation incorporates several regulatory requirements, including the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars for domestic material restrictions. Price evaluation preferences are available for certified HUBZone small business concerns. Administrative requirements include the use of the Wide Area WorkFlow system for all invoicing and payment requests. Cybersecurity compliance is mandated via DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

FILTERING DISK, FLUID

Solicitation # SPE7M1-27-U-0052

Solicitation SPE7M1-27-U-0052 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of fluid filtering disks, NSN 4330003636270. This procurement may result in a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is 52 units, with a guaranteed minimum of 7 units and an expected average of two orders per year. Delivery is required within 74 days after receipt of order to various CONUS and OCONUS DLA Depots. The approved source for this item is 11859 H028-020-G. Award will be granted to the responsible offeror whose quote is determined to be most advantageous to the government, with evaluation based primarily on price. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 21, 2026. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, contractors must comply with CMMC Level 2 Self-Assessment requirements, the Buy American Act, and the Berry Amendment. Invoicing and payment processing shall be conducted through the Wide Area WorkFlow (WAWF) system, and both inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-1414

Solicitation SPE7M4-27-T-1414, issued by the DLA Weapons Support Fluid Handling Division, seeks quotes for 45 nonmetallic hose assemblies under NSN 4720-00-776-0657. The required assemblies must feature 2 inch NPSH threads, with one internal and one external thread, both equipped with rocker lugs. Technical compliance is governed by specification A-A-59614 and TDP Rev A Gen 1 per BASIC CID A-A-59566A. The procurement prohibits the use of additive manufacturing, Class I ozone depleting chemicals, and the intentional addition of mercury. Delivery is required within 158 days, with a need ship date of December 16, 2025, and a final required delivery date of April 24, 2026. Terms are FOB Origin, with inspection and acceptance occurring at the destination, DLA Dist San Joaquin in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Contractors are required to utilize Wide Area WorkFlow for invoicing and must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment standards. Evaluation includes a price preference for certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

DEHYDRATOR UNIT, NONREA

Solicitation # SPE8E9-27-Q-0075

Solicitation SPE8E9-27-Q-0075 is a small business set-aside Request for Quotation issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of two nonreactivating dehydrator units, NSN 4440-01-411-2780. The procurement requires delivery within 214 days after order to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with both inspection and acceptance occurring at the destination. Quotations must be submitted via the DLA Internet Bid Board System by November 6, 2026, and remain valid for 90 days. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Key restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with various FAR and DFARS clauses is required, specifically regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and the detection of counterfeit electronic parts. Payment will be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

Coil Unloader Assembly Fabrication and Supply

Dallas Area Rapid Transit

POSTED

about 12 hours ago

DEADLINE

Specialized Munitions Equipment SupplyThis subcontract involves the supply of specialized machinery used in the production of lethality payloads and Electro-Explosive Device Activators for prime contractors supporting Army Materiel Command projects. The scope of work includes the manufacture and delivery of precision tooling, energetic material filling equipment, and functionality testing rigs for ESADs. All equipment must be installed at the Pine Bluff Arsenal. To ensure compliance with defense requirements, the provider must adhere to AS9100 or equivalent aerospace and defense quality standards. This Department of Defense initiative falls under NAICS code 333999 and requires responses by December 14, 2026.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Solicitation # N0038325QT423

Solicitation N00383-25-Q-T423, issued by NAVSUP Weapon Systems Support Philadelphia, is a competitive request for quotations for the procurement of plug covers, specifically item 0001 with ACN 1RM 1680-LL-F02-N129 P8. The government intends to make a single award to a responsible offeror whose quote is technically acceptable and most advantageous, with past performance weighted as more important than price. Evaluation of past performance will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk. The current response deadline has been extended via Amendment 0007 to November 12, 2026, at 4:30 PM EST. The contract requires delivery within 90 days and mandates strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking and labeling. Quality management must comply with ISO 9001 or SAE AS9100 standards, and calibration must meet NCSL Z540.3 or ISO 10012. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Additional requirements include compliance with Buy American and Balance of Payments programs, safeguarding of covered defense information per DFARS 252.204-7012, and the provision of Material Safety Data Sheets for any hazardous materials. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

SCREEN,PERF SHEET

Solicitation # N0010426QBE95

Solicitation N0010426QBE95 is a total small business set-aside request for quotation issued by NAVSUP Weapon Systems Support Mech for the procurement of perforated sheet screens (NSN 4330-01-500-5936). The requirement includes items 0001AA and 0001AB, with quantities updated via amendment to 4 each. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. The procurement is governed by a strict order of precedence for technical documentation, with mandatory vendor review of the Individual Repair Part Ordering Data (IRPOD) and other technical data available via the BPMI e-commerce site. The contract mandates compliance with higher-level quality standard MIL-I-45208 and requires the contractor to maintain an inspection system acceptable to the government. Deliveries are specified as FOB Destination, and the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1 for military distribution and MIL-STD-129 for marking. Key administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and the submission of a Certificate of Compliance and a pre-manufacturing procedure package. Additionally, the contractor must comply with cybersecurity requirements for safeguarding covered defense information under DFARS 252.204-7012 and ensure no mercury is intentionally added to the supplies.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Same awarding agency

Demolition and Disposal ServicesThis subcontract for Demolition and Disposal Services involves the removal of existing pneumatic tube systems and associated hardware within Building 110 of the VA Health Care System in Hampton, Virginia. The selected contractor is responsible for the complete demolition of the system, hauling away all debris for legal disposal, and ensuring that all rooms and interstitial spaces are left clear. All work must be performed in strict accordance with VA facility safety protocols and hazardous material handling standards. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238910 and is managed by the Department of Veterans Affairs Network Contracting Office 6. Interested parties must submit their responses by December 16, 2026.

Site Preparation Contractors

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Pneumatic Tube System Installation & ActivationThis subcontract opportunity involves the installation and activation of pneumatic tube systems for the Department of Veterans Affairs at Building 110 in Hampton, Virginia. The scope of work includes the installation of tubing, blowers, diverters, and stations across critical areas such as the Emergency Department, Laboratory, Blood Draw area, Mechanical Room, and Interstitial Room. The goal is to deliver a fully operational system, and the project requires manufacturer-certified installers who possess specific experience working within active clinical environments. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. Managed by the Network Contracting Office 6, the solicitation was posted on October 30, 2026, with a response deadline of December 16, 2026. Interested parties must meet the certification requirements to ensure the system is installed and activated according to the strict standards of a VA Health Care System facility.

Other Building Equipment Contractors

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Architect-Engineering (A-E) Design ServicesThis subcontract for Architect-Engineering Design Services involves providing professional design and engineering for a pneumatic tube system replacement at a VA Health Care System facility in Hampton, Virginia. The selected contractor will be responsible for investigating existing conditions in Building 110 and developing comprehensive design drawings and technical specifications to integrate the new system within the Mechanical Room, Laboratory, and Emergency Department. The project is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541330 and is managed by the Department of Veterans Affairs Network Contracting Office 6. A Professional Engineering license is required to deliver the final design package. Interested parties must respond by December 16, 2026.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Y1DA--590-27-120 Replace Pneumatic Tube System

Solicitation # 36C24627R0010

The Department of Veterans Affairs, Network Contracting Office 6, is issuing a pre-solicitation notice for a design-build project to replace the pneumatic tube system at the Hampton VA Health Care System in Hampton, Virginia. The selected contractor will be responsible for the entire lifecycle of the project, including design and engineering, investigation of existing conditions, removal and disposal of the old system, and the installation and activation of a new system. The scope of work specifically targets Building 110, encompassing the Emergency Department, Laboratory, Blood Draw area, Mechanical Room, and Interstitial Room. The project is estimated to have a construction magnitude between 500,000 and 1,000,000 dollars with an anticipated period of performance of 675 calendar days. This procurement is a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 236220, with a size standard of 45 million dollars. To be eligible for the award, firms must be registered in the System for Award Management (SAM) and verified in the Small Business Administration Dynamic Small Business Search (SBA DSBS). The government intends to award a Firm Fixed Price contract within 120 days of quote receipt. The solicitation is expected to be issued around November 16, 2026, with a response deadline of December 16, 2026. All solicitation documents and amendments will be managed exclusively through SAM.gov, as no paper copies will be provided.

Commercial and Institutional Building Construction

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Ward Interior Fit-OutThe Ward Interior Fit-Out is a subcontract opportunity with the Department of Veterans Affairs, specifically managed by Network Contracting Office 6. The project involves the renovation and build-out of ward spaces at the Charles George VA Medical Center in Asheville, North Carolina. The scope of work includes general renovation tasks such as framing, drywall installation, and the application of medical-grade finishes to ensure the spaces are fully functional for healthcare use. All work must be executed in strict accordance with VA, Federal, State, NFPA, and Life Safety building codes. This project falls under NAICS code 236220 and requires the delivery of completed, compliant renovated ward spaces. Interested parties should note the response deadline of November 12, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

ICRA Barrier and Containment InstallationThis subcontract involves the supply and installation of temporary environmental barriers for prime contractors operating at the Charles George VA Medical Center in Asheville. The scope of work focuses on creating sealed containment zones and infection control barriers utilizing negative air machines, HEPA filters, antimicrobial plastic sheeting, and temporary partitions. All installations must strictly adhere to VA Life Safety and NFPA codes to ensure a safe healthcare environment. Managed by the Department of Veterans Affairs Network Contracting Office 6, this opportunity falls under NAICS code 238990. The solicitation was posted on October 29, 2026, with a response deadline set for November 12, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Structural and Interior DemolitionThis subcontract involves the structural and interior demolition of ward infrastructure at the Charles George VA Medical Center in Asheville. The selected contractor will work under prime contractors to remove structural elements and interior finishes, ensuring the site is completely cleared and prepared for subsequent new construction. Due to the nature of the active medical facility, the project requires strict adherence to infection control risk assessment measures, including the installation of safety enclosures and infection control barriers. The contractor must utilize specialized noise and dust control tools to minimize disruption to healthcare operations and maintain a safe environment for patients and staff.

Site Preparation Contractors

POSTED

DEADLINE

Asbestos and Lead-Based Paint AbatementThis subcontract opportunity involves the identification, removal, and disposal of hazardous materials at the Charles George VA Medical Center in Asheville, North Carolina. The selected contractor will support prime contractors on VA healthcare projects by abating asbestos-containing materials and lead-based paint. All work must be performed using specialized containment systems and HEPA filtration in strict accordance with VA and Federal regulations. Qualified bidders must hold the necessary EPA and State certifications for asbestos and lead abatement and are responsible for delivering certified clean site clearance reports. This project is managed under the Department of Veterans Affairs Network Contracting Office 6, with a response deadline of November 12, 2026.

Remediation Services

POSTED

DEADLINE

Two-Way Radio System Maintenance and Emergency RepairThis subcontract, issued by the Department of Veterans Affairs Network Contracting Office 6, involves the routine inspection and emergency repair of the KAO-497 radio system at VA medical facilities in Salisbury, North Carolina. The selected provider must offer continuous 24/7/365 support, adhering to a strict response protocol of one hour for phone communications and four hours for on-site arrival. Key responsibilities include repairing faulty components, maintaining detailed pager logs, and providing documented evidence of system uptime and maintenance. As the work is performed within medical facilities, the contractor must comply with OSHA Bloodborne Pathogens Standards to ensure safe access and operation. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 811210. Interested parties must submit their responses by November 16, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

VIPER Frequency Programming and MaintenanceThis subcontract, titled VIPER Frequency Programming and Maintenance, is issued by the Department of Veterans Affairs Network Contracting Office 6. The project focuses on the programming and maintenance of state-level emergency frequencies for prime contractors working on VA medical facility projects in North Carolina. Specifically, the contractor is responsible for programming NC state Law Enforcement and Medical VIPER frequencies using specialized software to ensure seamless connectivity with state emergency networks. This work requires specific authorization to program law enforcement frequencies and involves the delivery of verified radio handsets and repeaters. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 519190, with the place of performance located in Salisbury, North Carolina. Interested parties must submit their responses by November 16, 2026, at 2:00 PM.

All Other Information Services

POSTED

DEADLINE

Motorola Capacity Max System UpgradeThis subcontract opportunity, managed by the Department of Veterans Affairs Network Contracting Office 6, involves upgrading two-way radio systems to the Motorola Capacity Max platform across medical facilities in Salisbury, Kernersville, and Charlotte, North Carolina. The scope of work includes the configuration and deployment of three FB-type exclusive channels to ensure wide-area coverage and the linking of facilities for unified communication. Additionally, the selected contractor will handle all necessary electrical disconnections, reconnections, and finish trim to deliver a fully operational radio network. To be eligible, contractors must hold Motorola Certified Technician or Partner status. This project is designated as a Total Small Business Set-Aside under NAICS code 541519. Interested parties must submit their responses by November 16, 2026.

Other Computer Related Services

POSTED

DEADLINE

RENTAL OF TWO CHILLERS FOR ONE YEAR

Solicitation # 36C24627Q0086

Solicitation 36C24627Q0086 is a request for a firm-fixed-price contract from the Department of Veterans Affairs for the one-year rental of two air-cooled chillers, specifically 100-ton and 400-ton units, including associated hoses. The equipment will be installed at the Charles George VA Medical Center in Asheville, North Carolina, to provide uninterrupted cooling services to Building 15 and Building 47. The period of performance is scheduled from December 11, 2026, to December 10, 2027. The contractor is responsible for the safe installation, operation, and routine maintenance of the units, which includes replenishing coolant and verifying electrical systems. Key deliverables include consistent cooling services and the submission of monthly maintenance reports. This procurement is a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS codes 238220 and 238990. Award decisions will be based on the most advantageous offer, evaluating technical capability, past performance within the last three years, and price. Technical evaluations will focus on the offeror's ability to comply with HIPAA, VA criteria, NFPA, OSHA, and local building codes, as well as the quality of their contingency plans. Quotes must be submitted via email to the contracting office by November 10, 2026, and must include a signed Standard Form 1449, pricing schedules, and verification of SDVOSB status.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

70--INTERFACE UNIT,DATA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFC05

Navsup Weapon Systems Support

POSTED

about 14 hours ago

CLOSED

about 6 hours ago

SPACER, 2ND STAGE

Solicitation # N0010425QAF27

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

RUGGED,FLAT,PANEL

Solicitation # N0010425QLE15

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Supplier of Linear Actuating Cylinder Parts Kits

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

BOTTLE, SCREW CAP

Solicitation # SPE2DS-27-T-1151

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-27-T-1800

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEXUAL ASSAULT DETERMI

Solicitation # SPE2DH-27-T-0327

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0564

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

PARTS KIT, FLUID PRESSU

Solicitation # SPE7M1-27-T-1785

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TRACK PLATE, INSTALL

Solicitation # SPE7M3-27-T-0779

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS