Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Pole Band Fastening Equipment

Active
Z4849State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the procurement of pole band fastening equipment consisting of .75 inch fixed and sliding retainer extrusions compatible with .75 inch stainless steel bands. The aluminum extrusions must be manufactured from 6061-T6 aluminum or meet or exceed a minimum tensile strength of 38,000 PSI and a minimum yield strength of 35,000 PSI. Each assembly must include carriage bolts sized either 3/8 inch by 6 inches or 5/8 inch by 7-1/2 inches, paired with Grade 5 nuts conforming to ASTM A449 standards. All hardware must be hot dipped galvanized in accordance with ASTM A153 and include both a flat washer and a lock washer for each bolt. Approved manufacturers and part numbers are specified as HUBBEL CBAB38 and ALUMA-FOBAB-38. This solicitation, identified as Z4849, is issued by Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. The solicitation was posted on July 24, 2026, with a firm response deadline of July 30, 2026, at 7:00 PM. The work is to be performed in Nashville, Tennessee, and all proposals must be submitted through the vendor portal at the provided UI link. Tiffany Caruthers serves as the primary procurement contact, reachable via phone at 615-747-3593 or email at tcaruthers@nespower.com for inquiries related to the bid.

General Info

Procurement of aluminum pole band fastening equipment with galvanized hardware for Nashville Electric Service, response due July 30, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4849_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, US
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, US
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
POLE BAND FASTENING EQUIPMENT .75" FIXED AND SLIDING RETAINER EXTRUSIONS WITH HARDWARE FOR USE WITH 0.75" STAINLESS STEEL BANDS. ALUMINUM EXTRUSIONS MUST BE COMPOSED OF 6061-T6 ALUMINUM OR EXCEED THE STRENGTH REQUIREMENTS BELOW: MINIMUM TENSILE STRENGTH = 38,000 PSI MINIMUM YIELD STRENGTH = 35,000 PSI CARRIAGE BOLT 3/8" X 6" OR 5/8" X 7-1/2", AND NUT MUST BE GRADE 5 (ASTM-A-449) HOT DIPPED GALVANIZED AT ASTM A 153. MUST INCLUDE FLAT WASHER AND LOCK WASHER WITH EACH BOLT. Approved Manufacturers and/or Part Numbers: HUBBELCBAB38 ALUMA-FOBAB-38

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Precision Machined Clutch Disk ManufacturingThe contract requires the manufacture of nonvehicle clutch disks meeting military specifications, identified by NSN 3010-01-164-7927, with strict adherence to material composition, dimensional tolerances, and performance requirements. All production must comply with applicable military standards and undergo First Article Testing to verify conformance before full-scale manufacturing can proceed, ensuring each unit meets exacting quality and reliability benchmarks for military use. The work is classified as a subcontract under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Responses must be submitted by August 25, 2026, with no solicitation number provided, and the place of performance and point of contact details are unspecified. The contract opportunity is publicly accessible via the DIBBS platform and is open to qualified subcontractors capable of fulfilling military-grade precision machining requirements without any set-aside restrictions. The focus is entirely on technical compliance, quality control, and the ability to deliver certified components critical to defense systems.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
DISK, CLUTCH, NONVEHIThe contract solicitation SPE7LX-26-R-0025 seeks the supply of a nonvehicle clutch disk, identified by NSN 3010-01-164-7927, under an indefinite-delivery indefinite-quantity (IDIQ) firm-fixed-price structure administered by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation period opened on July 24, 2026, with proposals due by August 25, 2026, and is issued under NAICS code 332510 for machine shop, turned product, and screw machine products manufacturing. The award will be made using a trade-off methodology that evaluates price, past performance, proposed delivery, and surge and sustainment capability as equal factors, with price being the most heavily weighted. Offerors must submit pricing in a separate spreadsheet, with contract value bounded between a minimum of $23,992.14 and a maximum of $5,643,650.66 across a three-year base period and two one-year options. The contract includes multiple line items for related fasteners and washers, each with defined minimum and maximum order quantities per delivery order and annual demand estimates. Compliance with rigorous military packaging and marking standards is mandatory, following MIL-STD-2073-1E for preservation and packaging and MIL-STD-129 for labeling and barcode requirements. All materials must be labeled with NSN, contract number, lot and item identifiers, and special markings such as “Product Verification Test Samples – Do Not Post to Stock.” Preservatives containing mercury are strictly prohibited. Delivery must occur FOB destination within 110 days of order placement, and inspection and acceptance occur at the destination unless specified otherwise under a critical item PIC “C.” First Article Testing is required for two units, with a 120-day submission window for test reports and destruction of samples post-evaluation. Cybersecurity obligations require adherence to NIST SP 800-171 for protecting controlled unclassified information and include mandatory flow-downs to subcontractors. Contractors must also comply with prohibitions on ozone-depleting substances, inverted domestic corporations, and debarred entities, with deviations noted under DEVIATION 2026-00038. All invoices must be submitted electronically through Wide Area WorkFlow (WAWF), and past performance will be assessed via the Supplier Performance
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
53--CLAMP,LOOPThis contract, issued under solicitation number N0038326QQA80 by the Navy’s Naval Supply Systems Command Weapon Systems Support, seeks a contractor to supply 53–CLAMP, LOOP, with strict requirements tied to military specifications and quality assurance standards. The work falls under NAICS code 332510 and is subject to a small business size standard of 750 employees. The contractor must comply with MIL-STD-130 for item marking and maintain a quality control system compliant with Mil-I-45208A, Mil-Q-9858, or ISO 9000/9001/9002 equivalents. All inspections, repairs, and testing procedures must be documented, approved by the Government, and supported by sequential diagrams and performance specifications. The contractor is responsible for inspecting all purchased materials against the Technical Data Package, maintaining detailed records for at least 12 months, and implementing controls for nonconforming material, including segregation and disposition protocols. The Internal Review Board has limited authority for minor rework but cannot approve “AS-IS” dispositions, which remain under Government control via the Material Review Board. Repair assessment testing by Government personnel may occur quarterly on randomly selected items, and complete historical records—including inspection data, repair cards, part replacements, and test results—must be maintained by serial number and made available upon request. The contract includes mandatory compliance with several federal and DoD regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and equal opportunity requirements for workers with disabilities. Warranty coverage extends one year after delivery, with defects to be reported within 45 days of discovery. All invoices and receiving reports must be submitted via the Wide Area Workflow system, and use of the Workflow Pro Assist Module is required. The contractor must submit royalty information, adhere to priority ratings for national defense use, and certify compliance with Federal Acquisition Regulation clauses, including annual representations and certifications. The point of contact for inquiries is Deja S. Thompson-Mitchell, reachable via email, with proposals due by August 24, 2026. Packaging must conform to MIL-STD-2073, and all work is to be performed in accordance with the Statement of Work, regardless of whether specific inspection clauses are explicitly listed. Failure to meet any requirement may result in rejection of deliverables, even under sampling protocols, as the Government reserves the right to reject known defective items.
Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
PLUGThis contract pertains to the procurement of a specialized plug component designated as SPECIAL EMPHASIS material (Level I/SUBSAFE) for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The item must conform strictly to Vacco Industries drawing S1E10203, part number S2B10128-3TA, and be manufactured from ASTM-A581 or ASTM-A582, Type 303 material, with mandatory quantitative chemical and mechanical analysis verified through certified test reports. Traceability is non-negotiable; each component must bear a permanent, legible traceability marking linked directly to its certification data, and all raw materials, processes, and subcontracted operations must maintain unbroken chain-of-custody from heat lot to final assembly. Welding, brazing, and repair activities require pre-approved procedures and qualified personnel under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with all weld documentation submitted electronically and authenticated by approved electronic signatures. No mercury or mercury compounds may be present, and any deviation from specifications requires formal written approval from the Contracting Officer, classified as Critical, Major, or Minor, and submitted via email to NAVSUP WSS. The contractor must operate under a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to unannounced government audits and inspections at source, including subcontractor facilities. All certifications, including non-destructive testing, material analysis, and weld verification, must be 100% inspected for completeness, accuracy, and traceability, and submitted via WAWF prior to shipment, with final acceptance routed to Portsmouth Naval Shipyard. Delivery requires a signed Certificate of Compliance with no disclaimers, explicitly affirming full conformance to all contractual and specification requirements. Packaging and marking follow MIL-STD-2073, and all documentation must be submitted electronically through ECDS with PKI/CAC authentication. The contract is issued under Emergency Acquisition Flexibilities, rated under DPAS for national defense priority, and explicitly excludes foreign nationals from accessing certain technical data. Only small business offerors are eligible, and the award is bilateral, requiring the contractor’s written acceptance before
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
PLUG,PROTECTIVE,DUSThis contract pertains to the procurement of a protective plug designated as SPECIAL EMPHASIS material (Level I), intended for use in a critical shipboard system where failure could lead to catastrophic consequences including loss of life or vessel. The material must strictly adhere to Naval Ordnance Command drawings 3224123 and 3224175, with specific requirements including mandatory chemical and mechanical analysis for the supplied material, which must conform to QQ-N-281 Class A, Form 1, Cold Drawn. Internal threads must be cut, not cold-formed, and all threaded components must be inspected using FED-STD-H28 System 21 or higher, with substitutions requiring prior approval. Traceability is paramount; each component must be permanently marked with a unique traceability identifier linked directly to certification reports detailing chemical composition and mechanical properties, with sampling required at least every eight hours during manufacturing. All certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material allowed to proceed without formal acceptance. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, subject to government audit at any time, and must ensure all subcontractors comply with identical or equivalent requirements, including traceability, documentation, and inspection protocols. All material must be traceable from raw stock through every processing step to final delivery, with strict controls on handling, segregation, and marking to prevent commingling. Re-certification is required whenever processing alters material properties, and any deviation or waiver—whether minor, major, or critical—must be formally submitted and approved by the Contracting Officer. The certificate of compliance must be positive, unqualified, and explicitly confirm full adherence to all requirements, including the use of mercury-free materials and properly installed elastomers within shelf life. Final inspection mandates zero-defect acceptance criteria, 100% review of certification documents, and 100% verification of traceability markings. All documentation must be submitted electronically through ECDS and WAWF, with the DODAAC updated to N50286. The order is prioritized under the Defense Priority and Allocation System (DPAS) and issued under Emergency Acquisition Flexibilities, with a total delivery window of 365 days from the contract’s effective date and a one
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 24 days
View Details
NAICS: 332510
New
DIBBS
Manufacture of Resilient Utility MountsThe contract is for the full production of 190 resilient utility mounts identified by NSN 5340-01-197-3461, encompassing all aspects of manufacturing from material sourcing and fabrication to assembly and rigorous quality assurance, all in full compliance with military specifications. The work must be executed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, with the North American Industry Classification System code 332510 designated for the activity, ensuring the contract is reserved exclusively for small business concerns. The solicitation, issued by the Strategic Acquisition Program Directorate under the Department of Defense, was posted on July 23, 2026, with a firm response deadline of July 28, 2026. The contract is structured as a subcontract and will be procured through the DIBBS platform, with no specific place of performance or point of contact details provided. The requirement demands end-to-end production capability with strict adherence to defense standards, and any bidder must be certified as a small business to qualify for award.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Precision Manufacturing of Instrument Mounting ClampsThe contract calls for the precision manufacture and delivery of approximately 48 units of Instrument Mounting Clamps, identified by NSN 5340-00-937-1348, in full compliance with the specifications outlined in NASM28042 Revision 1. All units must adhere to rigorous military quality standards, including the implementation of zero-defect sampling plans to ensure flawless performance and reliability under operational conditions. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332510 designating the industry as Fabricated Metal Product Manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense, reflecting its critical role in supporting defense systems requiring high-integrity components.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Precision Manufacturing of Resilient Mount PlateThe contract requires the manufacture of 174 units annually of a military-spec resilient mount plate, identified by NSN 5340011615337, with strict adherence to defined material, dimensional, and performance standards to ensure operational reliability in defense applications. Production must meet all technical specifications mandated for military use, and the work is subject to rigorous quality control protocols to maintain consistency and compliance across the full annual production run. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the North American Industry Classification System code 332510, which pertains to forging and stamping. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is classified as a subcontract under the Strategic Acquisition Program Directorate of the Department of Defense. All work is expected to align with federal acquisition regulations and must be performed in accordance with the technical and administrative requirements set forth by the contracting authority.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Supply of Spring Tension Clips (NSN: 5340-01-193-7153)Eight units of CLIP, SPRING TENSION with NSN 5340011937153 are being procured under a small business set-aside contract issued by the Strategic Acquisition Program Directorate under the Department of Defense. The solicitation, posted on July 23, 2026, requires full compliance with military packaging, labeling, and hazardous materials handling standards to ensure safe and standardized delivery. Responses are due by July 28, 2026, and the contract is classified as a subcontract under NAICS code 332510, which pertains to forging and stamping. The procurement is reserved exclusively for small businesses as defined by the SBA, and the place of performance and point of contact details are not specified in the available data. The official solicitation can be accessed through the DIBBS system via the provided link.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Precision Hardware Manufacturing (LOCK, ASSEMBLY Units)The contract entails the manufacture of precision LOCK, ASSEMBLY units identified by NSN 5340-01-722-3941, requiring strict adherence to Department of Defense technical standards, military specifications, and rigorous material traceability protocols. All units must meet documented quality requirements to ensure full compliance with DLA’s performance and inspection criteria, with production intended for use in critical defense applications. The work is classified as a subcontract under NAICS code 332510, indicating specialized metal component manufacturing, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, providing a five-day window for qualified subcontractors to submit proposals. This opportunity is managed under the Land Supply Chain organization within the Department of Defense, though no specific set-aside classification or point of contact details are provided. Interested parties must access the official request for quotation through the DIBBS portal using the provided link to review full technical requirements and submission instructions.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Precision Seal Manufacturing and SupplyThe contract involves the manufacture and supply of 33 units of a military-specification seal with the National Stock Number 5365010611849, strictly adhering to Department of Defense standards for quality, form, fit, and function as mandated by the Defense Logistics Agency. The work must comply with all technical and performance requirements established for defense-grade components, ensuring full interoperability and reliability in operational environments. The contract is classified as a subcontract under the NAICS code 332510, indicating industrial manufacturing activities, and is issued by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. Performance is required at the specified location in New Cumberland, Pennsylvania, with the zip code 17070-5002. The solicitation was posted on July 23, 2026, and requires responses to be submitted no later than July 28, 2026, with all submissions managed through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
Precision Hardware Manufacturing – Aircraft Door Lockset AssemblyThe contract awards a small business the exclusive responsibility to manufacture and assemble complete aircraft ground door locksets in full compliance with military specifications, covering all stages from precision machining and surface finishing to rigorous quality control, packaging, and labeling. All work must meet stringent defense standards, ensuring reliability and durability under operational conditions, with final products delivered in accordance with established military and industrial protocols. This is a total small business set-aside under the SBA program, meaning only certified small businesses are eligible to bid, promoting growth within the small business industrial base. The North American Industry Classification System code 332510 identifies this as a forging and stamping activity, though the scope extends to full assembly and quality assurance operations. The solicitation was posted by the Strategic Acquisition Program Directorate within the Department of Defense with a response deadline of July 28, 2026, and performance is expected to support national defense requirements without specified geographic constraints.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 4 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 331491
New
SLED
Strandvise Guy 3/8 Long BailThe contract solicits the Strandvise Guy 3/8 Long Bail Automatic Deadend, a specialized assembly designed for use with 3/8 inch universal grade steel strand or guy wire, with a wire range of 0.325 to 0.392 inches. The assembly includes a Type-C bail, yoke, spring, jaws, tapered aluminum housing cartridge, and pilot cup, ensuring secure and reliable anchoring for utility applications. Only approved manufacturers and part numbers are acceptable, specifically MACLEAN5202-L, POWERLIPACD38U-L, HUBBELGDE-5202L, ALLIEDBAB520200L, and GRIDPOWAGDE38U-L, ensuring compatibility and performance standards are met. Solicitation number Z4853 was posted by Nashville Electric Service, a SLED agency operating under Tennessee, with bids due by August 3, 2026 at 7:00 PM. The place of performance is Nashville, Tennessee, and all deliveries must align with the agency’s operational needs. The primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com. Interested parties must submit responses through the official vendor portal at the provided uiLink, adhering strictly to the specified timelines and technical requirements to remain eligible for award.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
SLED
Relay BaslerThe contract solicits a Basler BE1-951-H1 digital protection relay, specifically the half-rack case configuration, which provides comprehensive multifunctional protection and monitoring capabilities for electrical systems. This relay delivers three-phase, ground, and negative sequence overcurrent protection with four-shot reclosing functionality, along with forward and reverse power protection, breaker failure detection, over and under frequency and voltage protection, and overexcitation protection. It also includes sync check, breaker monitoring and control, sequential event recording, detailed fault reporting, and metering functions to support operational integrity and diagnostic accuracy. The required unit must be the approved Basler model BE1-951-E3N1H3U or an equivalent approved alternative. The solicitation is issued by Nashville Electric Service under solicitation number Z4850, with a posted date of July 24, 2026, and a response deadline of July 29, 2026, at 7:00 PM. The procurement is categorized under a SLED organization type, with performance taking place in Nashville, Tennessee. Primary contact for inquiries is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. Additional details and submission instructions are available through the vendor portal at the provided uiLink.
Relay and Industrial Control Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423610
New
SLED
TerminalThe contract calls for the procurement of terminal lugs designed for #4/0 stranded copper conductors, featuring two holes with standard NEMA drilling pattern "D" dimension of 3 inches and an overall length of approximately five inches. These terminals, marketed under approved part numbers such as HOMACL4/0-N, TELEDYNEBBLU-4/OD, RICHARDSCL12-2N, BURNDY HY-LUG YA28-2N, and ASKINCELL4012/1.75XSH, must meet specified dimensional and material standards to ensure compatibility and reliability in electrical installations. The components are intended for use in utility-scale applications requiring robust, high-current connections. This solicitation, identified by the number Z4851 and posted by the Nashville Electric Service under the Tennessee state agency, is open for responses until July 29, 2026, with submissions due by 7:00 PM Eastern Time. The procurement is classified under a SLED (State, Local, and Educational) organization and is managed by Procurement Contact Tiffany Caruthers, reachable at 615-747-3593 or tcaruthers@nespower.com. All bids must be submitted through the vendor portal linked via the official solicitation URL, and the place of performance is specified as Nashville, Tennessee, with no set-aside provisions applied to this contract.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335313
New
SLED
Surge ArresterThe contract calls for a station-class polymer-housed lightning arrester rated at 3 kilovolts, featuring a metal oxide varistor (MOV) technology designed for use on a grounded neutral 4160 volt line-to-line electrical system. The arrester must have a minimum maximum continuous operating voltage (MCOV) rating of 2.55 kilovolts and be constructed with a gray polymer housing to ensure durability and environmental resistance. It is specifically engineered for mounting on a three-bolt pattern arranged in a 10-inch circle, ensuring secure and standardized installation compatibility. Only approved manufacturers are permitted, including Siemens with part number 3EL1003-1PC21-4YH5, Cooper with UHAA003002A0845A11, ABB with AUTOQ003SA002A, and Hubbell with EVP0003003001. The solicitation, issued by Nashville Electric Service under reference number Z4855, is open for response until July 29, 2026, with proposals submitted through the vendor portal. Procurement inquiries are to be directed to Bailey Allen at the designated contact information, and the equipment is intended for performance within Nashville, Tennessee.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424950
New
SLED
Brush, Paint 3 InchThe contract solicits 3-inch polyester paint brushes for use by Nashville Electric Service in Tennessee, with approved manufacturers and part numbers including WEILER40060, WOOSTER5378-3, P. P. G., BEST with NESTK numbers 4603260 and 2589, SHERWIN with NESTK number 4603260 and 441, and GRAY-SEA with NES number 4603260 and 979HOOSER. The solicitation is issued under number Z4854 and was posted on July 24, 2026, with a response deadline of July 28, 2026, at 7:00 PM. This procurement falls under the SLED classification, indicating it is targeted toward state, local, or educational entities, and the place of performance is specifically in Nashville, Tennessee. The point of contact for inquiries is Bailey Allen, Procurement Contact, reachable via email at ballen1@nespower.com or by phone at 615-747-3724, and additional information can be accessed through the vendor portal at the provided UI link.
Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 423610
New
SLED
Wildlife Protection Cover Oil SwitchThe contract pertains to the procurement of wildlife protection covers specifically designed for oil switches, intended to safeguard against intrusion by squirrels and birds. The only approved manufacturer and part number for this item is UTILCOR7033, ensuring standardization and compatibility with existing infrastructure. The solicitation, identified by number Z4852, was posted on July 24, 2026, with a firm response deadline of July 29, 2026, at 7:00 PM. It is issued by Nashville Electric Service, a state, local, and educational government entity based in Tennessee, with the place of performance centered in Nashville. The procurement is managed through the organization’s vendor portal, accessible via the provided web link. Primary point of contact for all inquiries is Tiffany Caruthers, Procurement Contact, reachable by phone at 615-747-3593 or email at tcaruthers@nespower.com.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
SLED
Flatbed Trucking and Delivery of Oversized Steel ComponentsThe contract requires the transportation of 120 fabricated steel crossarms from the manufacturer’s location to Nashville, Tennessee, using open flatbed trucks equipped for oversized load securement. All shipments must comply with federal and state regulations for transporting heavy and oversized freight, ensuring the structural integrity of the components during transit through proper tying, blocking, and bracing techniques. The work is classified under NAICS code 484220 and is structured as a subcontract, with the Nashville Electric Service as the contracting entity under its Tennessee operations. Bidders must submit proposals by the deadline of July 28, 2026, at 7:00 PM Eastern Time, following the solicitation process outlined on the vendor portal linked in the contract details. Delivery performance, safety certifications, and adherence to load securement standards are critical to compliance and successful award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332312
New
SLED
Fabrication and Supply of Weathered Steel CrossarmsThe contract calls for the fabrication and delivery of 120 weathered steel crossarms designed for electrical utility dead-end applications, adhering strictly to NES Specification 33-506R4 and Drawing LSK-1116-L. These crossarms must be manufactured to meet exacting technical standards to ensure durability, structural integrity, and compatibility with existing utility infrastructure. The work is scheduled under a subcontract type, with responses due by July 28, 2026, and the solicitation was posted on July 22, 2026. The North American Industry Classification System code 332312 indicates this falls under the fabricated metal product manufacturing sector, specifically for structural metal fabrication. Performance of the contract is required in Nashville, Tennessee, where Nashville Electric Service, the awarding organization, operates. All delivered units must align with the specified design and material requirements to qualify for acceptance and payment.
Fabricated Structural Metal Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 335313
New
SLED
Supply of Polymer Distribution Elbow Surge Arresters (12kV, 13.8kV System)Nashville Electric Service is seeking suppliers to provide 300 units of polymer distribution elbow surge arresters rated for 12kV systems with full compatibility for 13.8kV networks, intended for installation on dead-front pad-mounted transformers. The contract is structured as a subcontract with a response deadline of August 4, 2026, at 7:00 PM, and the solicitation was posted on July 22, 2026. The equipment must meet technical specifications ensuring reliable surge protection in utility distribution networks, and delivery is expected to be performed at the Nashville, Tennessee location. The procurement falls under NAICS code 335313, which designates the manufacturing of other electrical equipment and components. Interested parties must submit proposals through the vendor portal at the provided URL by the stated deadline.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
SLED
Supply of Parallel Groove Connectors for Electrical Systems
Current-Carrying Wiring Device Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
SLED
Logistics and Delivery Services for Electrical Hardware
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
SLED
Supply of Hot Line Clamp Connectors (Electrical Tapping Hardware)
Current-Carrying Wiring Device Manufacturing

POSTED

3 days ago

DEADLINE

in 10 days
View Details