This Subcontract opportunity from Pennsylvania was posted on September 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Police Vehicle Upfitting and Equipment Installation

Closed

State & Local

Submission Closed10/08/2026, 03:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

The Jefferson Parish Government is soliciting bids for the purchase of a trailer for the Parkways Department under solicitation number 405. The required trailer must meet specific technical minimums, including W6 x 16 lbs per foot I-beams with SLB4" x 3.2 lbs crossmembers at 18" centers, 8,000 lb capacity axles with 12" x 3 3/8" electric brakes, and four 215/75R17.5 (H) tires with 6" x 17.5" 8 hole steel disc wheels. Additional requirements include LED lights, sealed modular neoprene jacketed wiring, four D-rings per side, a 2 1/2"x10" hydraulic jack, and a black urethane finish with rust prohibitive undercoating. Vendors must possess a Louisiana Dealers License to be eligible. The contract award will be based on the lowest responsive and responsible bidder. To be considered responsive, the apparent low bidder must provide final insurance certificates, including Commercial General Liability of $1,000,000 per occurrence, within ten calendar days of the bid opening. All insurance must conform to Jefferson Parish Resolution No. 136353 or No. 141125. Contractors are prohibited from starting work until all insurance and evidentiary requirements are met, and failure to maintain this coverage throughout the contract term may lead to suspension or termination. Requests for insurance deviations must be submitted in writing to the Purchasing Department before the bid due date.

Jefferson Parish Government

POSTED

DEADLINE

V-Belt Component SupplierThis small business set-aside subcontract, managed by the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament, requires the supply of 237 sets of matching V-Belts under NSN 3030-01-574-4787. The supplier is responsible for providing components that meet strict NSN specifications for prime contractors. All deliverables must be packaged according to MIL-STD-2073-1E and RP001, marked per MIL-STD-129, and accompanied by Safety Data Sheets for any hazardous materials in compliance with 29 CFR 1910.1200(g). The contract explicitly prohibits the use of additive manufacturing for the production of these belts. Logistics are handled via First Destination Transportation. Interested parties must respond by November 27, 2026, under NAICS code 336212.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Custom 53-Foot Expandable Mobile Unit FabricationThis subcontract involves the fabrication of a custom 53-foot expandable mobile training unit designed for prime contractors working on Texas State Technical College System projects. The unit must provide 807 square feet of usable space, featuring an 8-foot interior ceiling height and a lay-flat accessible entry. The final deliverable is a completed mobile shell that strictly adheres to all DOT compliance safety requirements and transport permit regulations. Interested parties must respond by December 4, 2026, regarding this project posted by the Texas State Technical College System.

Texas State Technical College System

POSTED

DEADLINE

Mobile Training Lab for Advanced Manufacturing and Industrial Maintenance at TSTC

Solicitation # 70

Texas State Technical College (TSTC) is soliciting proposals for a turn-key, custom-built 53-foot mobile training lab designed to support workforce training in advanced manufacturing and industrial maintenance. Funded by an Economic Development Administration grant, this mobile unit will provide approximately 807 square feet of usable space with an 8-foot interior ceiling height and expandable configurations to deliver on-site training at company and partner locations. The scope of work encompasses the entire lifecycle of the project, including design services, fabrication, installation of training equipment, and final delivery. Additionally, the supplier must provide access to comprehensive instructional materials, including lesson plans, lab activities, and software-based learning content. The selected supplier must ensure the unit is fully DOT compliant and equipped with necessary safety features and utility power infrastructure for all installed equipment. Proposals will be evaluated based on the technical design of the mobile unit, supplier qualifications and relevant experience in custom fabrication, the project management plan, and the overall cost structure. Key requirements include a detailed project schedule from award to final delivery, a robust quality control process, and a comprehensive warranty for the fabrication and installed systems. All proposals must be submitted exclusively through the TSTC Strategic Sourcing portal by the December 4, 2026, deadline.

Texas State Technical College System

POSTED

DEADLINE

Public Works Truck Body and Equipment UpfittingThis subcontract involves specialized body and equipment upfitting for the City of Alpharetta Public Works fleet. The scope of work requires the installation of truck beds, dump bodies, utility boxes, and auxiliary lighting systems, as well as the integration of hydraulic systems and specialized mounting hardware. All work must be performed in accordance with National Work Vehicle standards to deliver two fully upfitted, mission-ready large trucks. The project is categorized under NAICS code 336212 and was posted on November 12, 2026. Interested parties must submit their responses by the deadline of December 10, 2026. This opportunity is designed for providers capable of supporting prime contractors in delivering high-specification fleet vehicles for municipal use in Georgia.

POSTED

DEADLINE

23--Northern California Area Office (NCAO) Low Bed Tra

Solicitation # 140RR027Q0023

Solicitation 140RR027Q0023 is a Request for Quotation issued by the Bureau of Reclamation's Northern California Area Office for the procurement of one new 2027 lightweight 35-ton, 2-axle, 2-frame, 8-tire, air flip tail low bed trailer with a detachable gooseneck. The equipment must be constructed from 100% T-1 high tensile Swedish Strenx 700 steel and comply with California Vehicle Code section 27600. This procurement is a total small business set-aside, and the government will award the contract to the responsible offeror whose proposal is most advantageous based on technical ability to meet salient characteristics, past performance via CPARS, and price reasonableness. The contractor is responsible for all manufacturing, assembly, labor, and shipping to the destination in Shasta Lake, California. Key deliverables include the trailer and gooseneck, technical blueprints for approval prior to fabrication, and internal quality control documentation submitted before delivery. Final acceptance is contingent upon a comprehensive on-site inspection by a government mechanic and the Contracting Officer's Representative. Quotes must be submitted in PDF format to Erma Clark by November 16, 2026, and must include a completed pricing schedule for all line items. Payment will be processed electronically through the U.S. Department of the Treasury's Invoice Processing Platform System.

Reclamation Contracting Activity

POSTED

DEADLINE

F3729-260524 - Enclosed Trailer Baie-Comeau

Solicitation # WS5967931770

Public Services and Procurement Canada is soliciting bids on behalf of the Canadian Coast Guard for the acquisition of an enclosed trailer to be delivered to Baie-Comeau, Canada. This procurement is restricted to suppliers who hold a valid Supply Arrangement resulting from RFSA No. E60HP-19TRLR/A. The solicitation is governed by the Canadian Free Trade Agreement and is managed by the Department of Public Works and Government Services. The estimated contract duration is 12 months, with a proposed start date of November 25, 2026, and a required delivery date of January 20, 2027. Interested and qualified suppliers must submit their responses by the deadline of November 20, 2026. All detailed requirements and specifications are contained within the official bid solicitation documents.

Department of Public Works and Government Services

POSTED

DEADLINE

Request for Proposal (RFP) for Decontamination Pressure Wash Trailer.

Solicitation # WS5813052166

The Department of Fisheries and Oceans Canada in Winnipeg, Manitoba, is seeking proposals for the supply and delivery of one Aquatic Invasive Species Decontamination Pressure Wash Trailer. This solicitation is open exclusively to Canadian suppliers under a reciprocal procurement policy, and late submissions will not be accepted. Managed by the Department of Public Works and Government Services, the request for proposal is identified by solicitation number WS5813052166. The posting date is November 12, 2026, with a strict response deadline of November 19, 2026. Interested parties should coordinate with the primary contracting authority, Natalia Vengerov, regarding this federal requirement.

Department of Public Works and Government Services

POSTED

DEADLINE

26-58007 Mobile Ground Control Station (MGCS) and Cargo Trailer for Drone Field Operations

Solicitation # 26-58007

The National Research Council of Canada (NRC) is soliciting the design, integration, and delivery of a Mobile Ground Control Station (MGCS) System to support the Centre for Drone Innovation. This system consists of two primary components: a self-propelled MGCS vehicle, such as an all-wheel-drive cargo van or box truck, and a complementary enclosed cargo trailer for transporting drones and ground vehicles. The system is intended to consolidate flight data acquisition, computing, and communications infrastructure into a mobile platform, enabling rapid deployment to remote field locations with operational capabilities commencing within 30 minutes of arrival. The MGCS will support diverse research activities, including multi-UAV operations, electronic warfare, BVLOS experimentation, and AI autonomy research. The contract requires a modular design to ensure future upgradability and must comply with Canadian and U.S. road safety standards, specifically remaining operable with a standard provincial driver's license. Deliverables must be received by March 15, 2027, at the Drone and Flight Autonomy Laboratory in Mirabel, Quebec, under DAP Incoterms 2020. Selection is based on a combined rating of 20% technical merit and 80% price. Payment is structured across four milestones: design review (10%), vehicle fabrication (20%), system integration and testing (20%), and final delivery and acceptance (50%). All shipments must adhere to green procurement policies, utilizing reusable or recyclable packaging.

National Research Council of Canada

POSTED

DEADLINE

Commercial Chassis SupplyThis subcontract, issued by the Burke County Board of Commissioners in Georgia, requires the supply of a new commercial chassis featuring a two-door conventional cab for fire department apparatus projects. The selected provider must deliver a base vehicle platform that adheres to the specific models, ratings, and dimensions outlined in the project specifications, ensuring the chassis meets all projected axle load requirements. The scope of work involves delivering the completed commercial chassis directly to the apparatus manufacturer for final integration. Interested parties must submit their responses by November 30, 2026, in accordance with the solicitation guidelines for NAICS code 336212.

Burke County Board of Commissioners

POSTED

DEADLINE

School Bus Body FabricatorThis subcontract agreement appoints a School Bus Body Fabricator to manufacture and install bus bodies for prime contractors working on Hunterdon County Educational Services Commission school vehicle projects. The scope of work includes fabricating bodies with 16 gauge corrugated steel floors, applying National School Bus chrome yellow polyurethane baked-on paint, and utilizing double-bolted body mounting clips with rubber pads. To ensure quality and compliance, the fabricator must perform high-pressure water testing in accordance with FMVSS222 and New Jersey and Federal regulations before delivering the assembled bus bodies. The opportunity is listed under NAICS code 336212 and was posted on November 11, 2026, with a response deadline of December 15, 2026. Managed by the New Jersey Procurement agency, this contract focuses on the technical production and delivery of specialized vehicle components to meet strict safety and regulatory standards.

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-3099

Solicitation SPE7M4-27-T-3099 is a request for quotations from the DLA Weapons Support Fluid Handling Division for the procurement of 486 units of 100-foot heaving lines, identified by NSN 2020014490339. The requirement specifies that the supplies must be free of intentionally added mercury or mercury-containing compounds, with limited exceptions for functional components. The contract is issued under the First Destination Transportation program with FOB Origin terms, and the required delivery date is January 20, 2027, with a need ship date of February 23, 2027. Delivery is designated for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions and incorporates strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Technical and quality requirements are managed via the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity and domestic material restrictions, including the Berry Amendment and Buy American Act. While the solicitation is not a small business set-aside, it requires comprehensive representations and certifications regarding business size and the use of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract for Police Vehicle Upfitting and Equipment Installation involves the modification of Ford Ranger chassis to meet specific police vehicle safety and equipment standards for the Pennsylvania Equipment Leasing Authority. The scope of work includes the installation of emergency lighting, sirens, communication radio mounts, interior partitions, and police consoles, as well as the application of official police livery and decals. The objective is to deliver fully equipped, police-ready vehicles for prime contractors working on Bureau of Police projects. This opportunity falls under NAICS code 336212 and was posted on September 24, 2026, with a response deadline of October 8, 2026.

General Info

Subcontract for upfitting Ford Ranger police vehicles with equipment and livery for Pennsylvania.

Agency

Pennsylvania → Equipment Leasing Authority

NAICS

336212 - Truck Trailer Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-ECOOP-214.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PS, Police, Ford Ranger

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 24

subcontract

Response DeadlineOct 8

Deadline has passed

Submission Closed

10/08/2026, 03:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyPennsylvania → Equipment Leasing Authority

ContactsNo contacts available

OfficeN/A

Organization / AgencyPennsylvania → Equipment Leasing Authority

Office AddressN/A

ContactsNo contact information available

Full Description

Performs installation of police-specific equipment and modifications for prime contractors on Bureau of Police vehicle projects. Installs emergency lighting, sirens, interior partitions, police consoles, and communication radio mounts. Applies police livery and decals to the Ford Ranger chassis per police vehicle safety and equipment standards. Delivers a police-ready vehicle equipped with emergency apparatus.