POLYURETHANE COATIN

POLYURETHANE COATIN
POLYURETHANE COATING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN
ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W
MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT
TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE
THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT
(THAT IS, 1 OF 2, 2 OF 2, ETC.)
CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE
OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS
WITHIN THE KIT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with
SPE8ES-26-T-2256
SECTION B
the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-PRF-85285 USE: COATING FOR AIRCRAFT SURFACES. TYPE 1: AIRCRAFT APPLICATION, MAX VOC 420 GRAM/LITER FORM M: MULTI-COMPONENT TOPCOAT. GRADE N: NOT PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT. COLOR: OFF-WHITE IN ACCORDANCE WITH THE LATEST VERSION OF FED-STD-595, COLOR NUMBER 37855.
EXCEPTION(S) TO TECHNICAL DOCUMENT
This NSN is described as "Gunship Quality". This terminology is found in table 5-3 and the glossary of Air Force T.O. 1-1-8. Gunship Quality coatings shall meet specular gloss ratings as described below.
Gloss Meter Degrees Paint System Reading Unit
60 Semi-gloss 35-45 60 High-gloss 90 Min 60 Gloss 80 Min 60 Camouflage 7 Max 60 and 85 (both) Gunship 3 Max
Both Meters Required
GLOSS, SPECULAR The luster, shininess, or reflective ability of a surface; or the ability of a surface to reflect light regularly when light strikes the surface at a 60 degree angle. It is based upon the degree of optical smoothness of a surface, variations in smoothness being microscopic. Values above 90 are classified as high gloss, 80 to 90 as full gloss, 35 to 45 as semi-gloss, 5 to 7 as flat or camouflage and 3 or less as GUNSHIP QUALITY. Seven or less is also classified as lusterless.
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1
SPE8ES-26-T-2256
SECTION B
IAW BASIC SPEC NR MIL-PRF-85285F(1)
REVISION NR F DTD 10/12/2024
PART PIECE NUMBER: M85285-1-H-M-N-37855-001G
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 05/09/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 12/10/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-595/37855 REVISION NR DTD 02/14/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017327298 0001 KT 6.000
NSN/MATERIAL:8010015619572
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UI: KT SIZE: KIT, CONSISTS OF PARTS A AND B TO PRODUCE 3.79 LITERS (1 GALLON).
FOR KIT SIZES BETWEEN 1 AND 4 GALLONS (total kit volume from 128-512 fl.oz): MIL STD 129 labels required on each box. All contents making up
SPE8ES-26-T-2256
SECTION B
PR: 7017327298 PRLI: 0001 CONT’D
one kit (unit pack) will be placed in a D3 box (4G box if hazardous) and braced with proper dunnage to prevent damage and movement. Itemized list of contents required.
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE ADDITION OF LOT OR BATCH NUMBER.
TOS = H TEMPERATURE FOR STORAGE (TOS) CODE = 60-80 °F (HAZMAT)
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
FREIGHT FORWARDER:
DLO002
DF YOUNG INC
176-20 147TH AVENUE
JAMAICA NY 11434
JAMAICA
US
FREIGHT SHIPPING ADDRESS:
DLOG00
POC MAJ JAN KORENKO
VU 9994 POPRAD
KUKUCINOVA 5272
POPRAD
SK
MARKFOR
DLOG00
POC MAJ JAN KORENKO
VU 9994 POPRAD
KUKUCINOVA 5272
POPRAD
SK
M/F: (TCN) DLOG5461775106
RDD: NAA
PROJ: TP 2
SUPP ADD: DA2QAF SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A31 DIST: N01 ADV: 2A FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:07/02/2026
SPE8ES-26-T-2256 NSN/Part Number: 8010-01-561-9572 Quantity: 6 KT Purchase Request: 7017327298QTY: 6 Delivery: 10 days ADO