POLYURETHANE COATIN

POLYURETHANE COATIN
POLYURETHANE COATING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN
ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W
MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT
TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE
THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT
(THAT IS, 1 OF 2, 2 OF 2, ETC.)
CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE
OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS
WITHIN THE KIT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating
SPE8ES-26-T-2889
SECTION B
the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
U/I = KT SIZE: KIT CONSISTING OF PARTS A AND B TO PRODUCE 473 MILLILITERS (1 PINT)
TYPE 1: AIRCRAFT APPLICATION, MAX VOC 420 GRAM/LITER
CLASS H: HIGH-SOLIDS FORMULATION
COLOR: GREEN IN ACCORDANCE WITH THE LATEST VERSION OF FED-STD-595, COLOR
NUMBER 34095
THIS NSN HAS A SHELF-LIFE OF 12 MONTHS AND IS A TYPE II SHELF-LIFE
ITEM. PRODUCTS DELIVERED UNDER THIS CONTRACT SHALL BE MANUFACTURED TO
ENSURE THAT A MINIMUM OF 85% SHELF LIFE IS REMAINING AT TIME OF RECEIPT
BY THE FIRST GOVERNMENT ACTIVITY. SHELF LIFE MARKINGS SHALL BE IN
ACCORDANCE WITH THE LATEST REVISION OF MIL-STD-129, AND SHALL CLEARLY
INDICATE THE MANUFACT DATE AND THE INSPECTION/TEST DATE.
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE
ADDITION OF LOT OR BATCH NUMBER.
LESS THAN 1 GALLON KITS
LESS THAN 1 GALLON (127 FL.OZ. OR 231CI) KIT OF MATERIAL. MIL STD 129
LABEL REQUIRED ON EACH ASSEMBLED KIT. INTERMEDIATE CONTAINER WILL BE A
D3 BOX (4G BOX IF HAZARDOUS) AND BRACED WITH PROPER DUNNAGE TO PREVENT
DAMAGE AND MOVEMENT. ITEMIZED LIST OF CONTENTS REQUIRED.
O OPTION A: ALL CONTENTS MAKING UP ONE KIT WILL BE PLACED IN A E6 BOX
AND BRACED WITH PROPER DUNNAGE TO PREVENT DAMAGE AND MOVEMENT.
O OPTION B: KITS THAT CONTAIN 32 FL.OZ. OR 58 CI OR LESS OF MATERIAL
WILL BE PACKAGED BY WAY OF EITHER: A HEAVY WEIGHT
CLEAR PLASTIC BAG, HEAT-SHRINK METHOD, HEAT-SEALED METHOD, OR BLISTER
PACK METHOD.
O OPTION C: CANS ONLY. ADHESIVE DISK WITH ADHESIVE PROPERTIES OF AT
LEAST EQUAL STRENGTH OF THE CONTAINERS BEING BONDED WILL BE USED TO BOND
CONTAINERS TOGETHER CREATING A SINGULAR AND COMPLETE ENTITY (KIT).
O OPTION D: CANS ONLY. HEAT-SHRINK WITH BONDING PROPERTIES THAT WOULD
KEEP THE CANS SECURE BEFORE ANY DAMAGE TO THE CANS WOULD OCCUR. BONDED
CONTAINERS TOGETHER CREATE A SINGULAR AND COMPLETE ENTITY (KIT).
SPE8ES-26-T-2889
SECTION B
EXCEPTION(S) TO TECHNICAL DOCUMENT
THIS NSN IS DESCRIBED AS "GUNSHIP QUALITY". THIS TERMINOLOGY IS FOUND IN
TABLE 5-3 AND THE GLOSSARY OF AIR FORCE T.O. 1-1-8. GUNSHIP QUALITY
COATINGS SHALL MEET SPECULAR GLOSS RATINGS AS DESCRIBED BELOW.
GLOSS METER DEGREES PAINT SYSTEM READING UNIT
60 SEMI-GLOSS 35-45
60 HIGH-GLOSS 90 MIN
60 GLOSS 80 MIN
60 CAMOUFLAGE 7 MAX
60 AND 85 (BOTH METERS REQUIRED) GUNSHIP 3 MAX
GLOSS, SPECULAR THE LUSTER, SHININESS, OR REFLECTIVE ABILITY OF A
SURFACE; OR THE ABILITY OF A SURFACE TO REFLECT LIGHT REGULARLY WHEN
LIGHT STRIKES THE SURFACE AT A 60 DEGREE ANGLE. IT IS BASED UPON THE
DEGREE OF OPTICAL SMOOTHNESS OF A SURFACE, VARIATIONS IN SMOOTHNESS
BEING MICROSCOPIC. VALUES ABOVE 90 ARE CLASSIFIED AS HIGH GLOSS, 80 TO
90 AS FULL GLOSS, 35 TO 45 AS SEMI-GLOSS, 5 TO 7 AS FLAT OR CAMOUFLAGE
AND 3 OR LESS AS GUNSHIP QUALITY. SEVEN OR LESS IS ALSO CLASSIFIED AS
LUSTERLESS.
THE COMPONENTS OF EACH KIT SHALL BE PACKAGED IN MULTIPLE FRICTION
CLOSURE CANS IN ACCORDANCE WITH THE SUPPLIER'S NORMAL COMMERCIAL
PRACTICE, PROVIDED THAT THERE WILL BE NO INTERACTION CHEMICALLY OR
PHYSICALLY WITH THE CONTENTS SO AS TO DAMAGE THE CONTAINER OR ALTER THE
STRENGTH, QUALITY, OR PURITY OF THE CONTENTS.
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-85285F(1) REVISION NR F DTD 12/10/2024 PART PIECE NUMBER: M85285-1-H-34095-GUNSHIP-001P
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-595/34095 REVISION NR DTD 02/14/2017 PART PIECE NUMBER:
SPE8ES-26-T-2889
SECTION B
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-85285-7(1) NOT 1 REVISION NR 7 DTD 04/13/2009 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018561603 0001 KT 1.000
NSN/MATERIAL:8010012852490
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:012
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB4469
FB4469 377 LRS LGRDDC
CP 505 846 1853
4200 RANDOLPH AVE SE BLDG 1015
KIRTLAND AFB NM 87117-0001
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4469
SPE8ES-26-T-2889
SECTION B
PR: 7018561603 PRLI: 0001 CONT’D
FB4469 377 LRS LGRDDC
CP 505 846 1853
4200 RANDOLPH AVE SE BLDG 1015
KIRTLAND AFB NM 87117
US
M/F: (TCN) FB446952530428
RDD: 777
PROJ: TP 1
SUPP ADD: YAZ408 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:09/15/2025
SPE8ES-26-T-2889 NSN/Part Number: 8010-01-285-2490 Quantity: 1 KT Purchase Request: 7018561603QTY: 1 Delivery: 5 days ADO