Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Polyurethane Coating Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply and delivery of 3,000 pounds of military-grade polyurethane coating identified by NSN 8010013296304 to a U.S. Navy facility in Norfolk, Virginia. The contractor is responsible for all aspects of transportation, including bearing full costs and assuming all risks associated with shipment until delivery is completed. This is a subcontract under the NAICS code 325510, which corresponds to coating and related products manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 20, 2026, and the award is linked to contract SPE8ES24D0005 with delivery identifier SPE8ES26F64PK. No specific set-aside status is designated, and the contract does not include details on point of contact or exact shipping address beyond the delivery location in Norfolk.

General Info

Supply 3,000 pounds of military polyurethane coating to Norfolk, Virginia, under DLA management.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325510 - Paint and Coating ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES26F64PK.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

POLYURETHANE COATIN

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 3,000 pounds of military-grade polyurethane coating (NSN: 8010013296304) to a U.S. Navy facility in Norfolk, VA. Contractor bears all transportation costs and risks.

Similar Contracts

Same NAICS industry code

Specialized Coating Supply (Matthews Paint)

Parks & Recreation

POSTED

DEADLINE

Polyurethane Coating Kit Supplier (NSN 8010013921564)

Defense Logistics Agency

POSTED

DEADLINE

Polyurethane Coating Supplier (NSN 8010016812027)

Defense Logistics Agency

POSTED

DEADLINE

Polyurethane Coating Supplier (NSN 8010-01-701-9496)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Sealing Compound (NSN 8030-01-672-2868)

Defense Logistics Agency

POSTED

DEADLINE

Rain Erosion Resisting Coating Kit Supplier

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Paint Product Activator Supplier

Defense Logistics Agency

POSTED

DEADLINE

KIT, POLYURETHANE CO

Solicitation # SPE8ES-26-T-2762

Solicitation SPE8ES-26-T-2762, issued by the Defense Logistics Agency Troop Support, is for the procurement of one 1-gallon Polyurethane Coating Kit (NSN 8010013921564). Each kit must consist of one 3-quart container of 23-T3-105 and one 1-quart container of PC-216. The requirement is categorized under NAICS code 325510, with a delivery window of 20 days and an original required delivery date of September 14, 2026. Delivery is FOB Destination to the 157 ARW LRS LGRDC in Portsmouth, New Hampshire. The contract mandates strict adherence to hazardous materials standards, requiring the submission of Safety Data Sheets and labels compliant with Federal Standard No. 313-E and OSHA 29 CFR 1910.1200. The item is subject to a non-extendable 12-month shelf life and must be marked according to MIL-STD-129 and Special Marking Code 32. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will occur at the destination.

Defense Logistics Agency

POSTED

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-26-T-2758

Solicitation SPE8ES-26-T-2758 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of three kits of polyurethane coating, identified by NSN 8010-01-701-9496. The product is a two-part component with a 2:1 mix ratio, consisting of 2.00 gallons of Part A and 1.00 gallon of Part B per kit. The item is subject to a non-extendable shelf life of 12 months and is classified as a Type I (Code H) item. Delivery is required within five days after order, with a required delivery date of September 11, 2026, shipped FOB destination to Fort Campbell, Kentucky. The contract mandates strict adherence to hazardous material standards, requiring the submission of a Safety Data Sheet and labeling in accordance with 29 CFR 1910.1200 and Federal Standard No. 313. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including specific palletization requirements under RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. This acquisition is conducted under NAICS 325510 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, with payment processed through the Wide Area WorkFlow system. Offerors must also comply with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements.

Defense Logistics Agency

POSTED

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-26-T-2761

This contract is for the procurement of one kit of a two-component clear polyurethane topcoat, identified by NSN 8010-01-681-2027 and Akzo Nobel Aerospace Coatings part number 683-3-20. The product requires the use of Curing Solution X-310A and Thinner TL-59. It is classified as a Type I item with a non-extendable shelf life of 12 months. The order is issued by the Defense Logistics Agency under solicitation SPE8ES-26-T-2761 with a required delivery date of September 14, 2026. Delivery is set for 20 days after order and must be shipped FOB destination to Portsmouth, New Hampshire. Compliance with DLA packaging requirements, hazardous materials shipping standards, and MIL-STD-129 marking is mandatory.

Defense Logistics Agency

POSTED

DEADLINE

COATING KIT, RAIN EROSI

Solicitation # SPE8ES-26-T-2760

Solicitation SPE8ES-26-T-2760 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of four rain erosion resisting coating kits, identified by NSN 8010013153897. Each kit must consist of Parts A and B to produce 0.946 liters of gray coating in accordance with FED-STD-595 color number 36176. The items are designated as Type 2 Code 4 with an extendable shelf life of 12 months and must be stored in original unopened containers at temperatures between 70 and 100 degrees Fahrenheit. Delivery is required within 32 days of award, with a final required delivery date of January 10, 2027, shipped FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of Special Marking Code 33. Packaging options include the use of D3 or 4G boxes, E6 boxes, or specific bonding methods for cans, and all kits must include an itemized list of contents. Because the materials are hazardous, suppliers must provide Safety Data Sheets and labels conforming to the OSHA Hazard Communication Standard and 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will take place at the destination.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

ACTIVATOR, PAINT PRODUC

Solicitation # SPE8ES-26-T-2763

Solicitation SPE8ES-26-T-2763 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of paint product activator, identified by NSN 8010-01-1503046. The requirement is for one gallon of the product, which must be delivered to Nellis AFB, Nevada, within five days of the award. The item is subject to a non-extendable 12-month shelf life and must be furnished in round containers with multiple friction closures and a bail-type handle. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement is governed by NAICS code 325510 and incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 19 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS