This Pre-Solicitation opportunity from Department Of Defense was posted on July 13, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Portsmouth Naval Shipyard intends to issue a sole source solicitation to VACCO Industries (Cage: 99517), the OEM, for the restoration of VACCO Hovering and Depth Control (HDC) Pressurization and Vent Valves.

Awarded

N3904018R0321Federal

Submission Closed07/20/2018, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M4-27-Q-0104

Solicitation SPE7M4-27-Q-0104 is a small business set-aside, fixed-price request for 174 units of a fuel tank sump vent system drain valve assembly, identified by NSN 1680-01-121-5195. The item is designated as a critical application commercial item and must conform to basic drawing NR 77272 114PS509 Revision C and reference drawing NR 77272 114PS509 dated September 23, 2022. The procurement is managed by the DLA Weapons Support Fluid Handling Division, with a required delivery timeline of 230 days after award. Inspection and acceptance will occur at the origin. The contract mandates strict adherence to quality and security standards, including a CMMC Level 2 self-assessment and safeguarding of covered defense information. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Award decisions will be based on best value, evaluating price, offered delivery, and past performance. Invoicing must be processed through the Wide Area WorkFlow system. All quotes must be submitted to the issuing office in Columbus, Ohio, by November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

DIAPHRAGM, ACTUATOR VAL

Solicitation # SPE4A5-27-T-1622

Solicitation SPE4A5-27-T-1622 is a request for quotations issued by the DLA Weapons Support Center for the procurement of 35 units of special shaped actuator valve diaphragms, identified by NSN 4810013484203. The items are identified as commercial of a type and must be marked with Honeywell Aerospace US LLC part number 858886-27. Delivery is required within 171 days after receipt of order, with shipping terms set as FOB Origin and the final destination being the DLA Distribution Depot at Hill AFB, Utah. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All packaging must be labeled per MIL-STD-129 and palletized according to RP001. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard, with inspection and acceptance occurring at the destination per FAR 52.246-2. Additionally, the government will not evaluate offers utilizing additive manufacturing processes. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

REGULATOR SVR 4018 - ref 2101180

Solicitation # 2101180

Solicitation 2101180, titled REGULATOR SVR 4018, is issued by the Dallas Area Rapid Transit Authority in Texas. The procurement seeks supplies, services, or construction that must be of merchantable quality and conform to all specified drawings and technical requirements. The response deadline is November 4, 2026, with the solicitation posted on October 30, 2026. Inspection and acceptance of deliverables will occur at the destination. The contract stipulates that the Authority is exempt from Texas state and local sales and use taxes. Payments are processed 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be detailed, including the purchase order number, item number, description, quantities, and unit prices. Sellers must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have no conflicts of interest with Authority officials. Additionally, the seller must adhere to equal opportunity employment practices and obtain written consent before assigning the order or any due payments.

Dallas Area Rapid Transit

POSTED

DEADLINE

Industrial Gate, Check, and Ball Valve SupplyThis subcontract opportunity involves the supply and delivery of standard industrial flow control valves, specifically gate, check, and ball valves, for prime contractors working on U.S. Coast Guard Surface Forces Logistics Center projects. Managed by the Department of Homeland Security under agency CG-SEA-C23, the contract requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129R for marking and barcoding. Performance for these deliveries will take place in Curtis Bay. The procurement is designated as a total Small Business Set Aside under NAICS code 332912. Interested parties must note the posted date of October 30, 2026, with a response deadline set for November 16, 2026, at 2:00 PM.

POSTED

DEADLINE

Specialized Pressure Reducing Valve SupplyThis small business set-aside subcontract involves the manufacture and supply of specialized precision pressure reducing valves for prime contractors working on U.S. Coast Guard Surface Forces Logistics Center projects. Managed by the Department of Homeland Security under agency CG-SEA-C23, the contract requires all components to meet strict agency specifications and adhere to MIL-STD-2073-1E packaging and MIL-STD-129R marking standards. Performance will take place in Curtis Bay, Maryland. Interested parties must submit responses by November 16, 2026. Additionally, contractors are required to register with the Joint Certification Program if the project drawings are subject to export controls. The procurement falls under NAICS code 332912, focusing on the delivery of high-precision valve hardware.

POSTED

DEADLINE

Industrial Valve Supply (General/Mixed)This small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard Surface Forces Logistics Center, involves the sourcing, inspection, and delivery of various industrial valves, including gate, check, ball, and pressure reducing types. The contractor is responsible for ensuring all shipments comply with MIL-STD-2073-1E for packaging and MIL-STD-129R for marking and barcoding. Additionally, registration with the Joint Certification Program may be required to access export-controlled drawings. The contract requires completed shipments to be delivered FOB Destination to Baltimore, Maryland, with the place of performance located in Curtis Bay. Interested parties must submit their responses by November 16, 2026, under NAICS code 332912.

POSTED

DEADLINE

Dewatering Panel Swagelok

Solicitation # N4215827QE004

The Naval Sea Systems Command, Norfolk Naval Shipyard in Portsmouth, Virginia, is soliciting quotes for the purchase of two brand name OEM stainless steel dewatering panels, specifically Swagelok part number DIBRT-100625-DEWATER-PNL.R1. This firm fixed price contract requires the items to be SC-11 cleaned and prohibits any substitutions. The period of performance is scheduled from November 13, 2026, to March 1, 2027, with delivery required at Building 276 in Portsmouth, Virginia, by March 1, 2027. Award will be based on the Lowest Price Technically Acceptable basis. To be considered, offerors must submit a comprehensive price including shipping, a signed and dated RFQ, and a completed Technical Capability Statement. The contractor must comply with strict packaging and marking standards, including ASTM-D-3951-18 and MIL-STD-130 for unique item identification. Invoicing is to be processed electronically via the Wide Area WorkFlow system. All offers must be submitted to the designated contract specialist by November 5, 2026, at 11:00 am EDT.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

Solicitation # W0107-275654

The Department of National Defence is soliciting offers from Canadian suppliers for the production and shipment of 100 factory-new solenoids, specifically OEM Part Number Snap-tite Inc. V2W3X-85. These components are required as like-for-like replacements for Direct Fire Target Systems used in Light Hostile Fire Simulators at Garrison Petawawa. The solenoids must adhere to strict technical specifications, including a W-Series 2-way normally closed valve type, 12 VDC voltage, 6.0 watts wattage, and compatibility with oxygen and propane. All deliverables must be received by December 15, 2026, and delivered Delivered Duty Paid (DDP) to CFB Petawawa. Offers will be evaluated based on mandatory technical criteria and financial competitiveness in Canadian dollars. The successful contractor must comply with environmentally preferable packaging standards, ensuring materials are reusable, returnable, or recyclable in alignment with the Policy on Green Procurement. There are no security requirements for this contract, but the offeror must certify compliance with Canada's Code of Conduct for Procurement and confirm that the goods are not produced using forced labour. Payment for undisputed invoices will be made via direct deposit within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

VALVE,SOLENOID — 4810007832383 — SPRPA127QXA41

Solicitation # SPRPA127QXA41

Solicitation SPRPA127QXA41 is a Request for Quotations issued by DLA Aviation at Philadelphia for the procurement of 16 solenoid valves, identified by NSN 4810-00-783-2383. This requirement is designated as a Critical Application Item under Emergency Acquisition Flexibilities, with a delivery timeline of 90 days FOB Destination. The contractor is required to maintain the total equipment baseline configuration for all hardware, software, and firmware, and must comply with ISO 9001 quality management standards. Technical markings must adhere to MIL-STD-130, and packaging must follow MIL-STD-2073, with specific requirements for electrostatic discharge protection and the use of approved pallets for military distribution. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will involve risk assessments of the item, price, and supplier via the DoD Supplier Performance Risk System. Invoicing and payment will be managed electronically through the Wide Area WorkFlow system. Key compliance mandates include the Buy American and Balance of Payments Program, DFARS cybersecurity standards for safeguarding covered defense information, and strict hazardous material identification and labeling per 49 CFR and OSHA regulations. Inspection and acceptance will occur at the origin.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Pipe Couplings and Valves SupplyThis subcontract opportunity with Garney Companies, Inc. involves the supply of critical piping components for Bureau of Reclamation water pipeline projects. The scope of work includes providing flexible couplings, flange adapters, dismantling joints, and resilient-seated gate valves equipped with brass jack chain valve tags. All materials must strictly adhere to ASME B 16.1 and AWWA C509 standards to ensure project compliance and quality. The procurement is specifically set aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 332912. Interested parties must submit their responses by November 19, 2026, to be considered for the delivery of these essential valves and hardware components.

Garney Companies, Inc.

POSTED

DEADLINE

Supply of Valve Assemblies (NSN 4820013506397)This subcontract involves the manufacture or procurement of seven Valve Assemblies under NSN 4820013506397 for prime contractors supporting DLA supply contracts. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. All deliverables must be provided FOB Origin and must strictly adhere to the Buy American Act and the Berry Amendment. Quality assurance for the assemblies must comply with MIL-STD-1916 or ASQ H1331, while packaging and marking must meet ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332912.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Fluid Manifold FabricationThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the fabrication of aircraft fluid manifolds for prime contractors. The project requires the production of components identified by NSN 1560-01-157-8118, adhering strictly to Boeing drawings 81205 BAC5616, BACD2007, and 65C18640. Manufacturing must be completed via precision machining or approved additive manufacturing processes, with final deliveries meeting RP001 and MIL-STD-129 standards. Performance for this contract is centered at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332912. Due to the sensitive nature of the work, the selected provider must maintain ITAR/EAR certification and CMMC Level 2 compliance, while also agreeing to the terms of the Boeing Rights Guard License Agreement. Interested parties must respond by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Portsmouth Naval Shipyard intends to award a sole source contract to VACCO Industries for the restoration of Hovering and Depth Control pressurization and vent valves installed on a USS Submarine. As the original equipment manufacturer, VACCO Industries possesses the proprietary data and technical expertise required to clean, repair, test, and certify valves 13/15 and 14/16. The scope of work includes providing all necessary technicians, materials, management, and transportation to ensure the components meet all technical and operational specifications and submarine maintenance standards. This procurement is being conducted under the authority of FAR 6.302-1 due to the lack of authorized alternative sources for these direct replacement parts. The action is categorized under NAICS code 332912 and is designated for a large business. This notice serves as an informational presolicitation to identify potential interest and capability, though the government maintains sole discretion on whether to conduct a competitive procurement.

General Info

Agency

Department Of Defense → Portsmouth Naval Shipyard Gf

Contract Value

$207,045

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

Vendor's Facility, EL MONTE, CA, USA

Set-Aside

NONE

Awardee

VACCO INDUSTRIES

Award Issued Date

08/09/2018, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedJul 13

Presolicitation

AwardedAug 9

Contract was awarded

Submission Closed

07/20/2018, 04:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

Contacts2 people available

OfficePORTSMOUTH, NH, 03801-5000, USA

Organization / AgencyDepartment Of Defense → Portsmouth Naval Shipyard Gf

Office AddressPORTSMOUTH, NH, 03801-5000, USA

Contacts

Deana ManfrediContract Specialist

contact@example.gov

+1 (555) 000-0000

Alexandra JohnsonContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Portsmouth Naval Shipyard intends to issue a sole source solicitation to VACCO Industries (Cage: 99517). Portsmouth Naval Shipyard requires the restoration of Hovering and Depth Control (HDC) Pressurization and Vent Valves installed aboard a USS Submarine. VACCO is the designer and original equipment manufacturer (OEM) of the VACCO HDC valves requiring repair. These are "direct replacements" parts/components for existing equipment. VACCO Industries possesses the necessary proprietary data, drawings, knowledge, material, and expertise needed to provide the repair service required. There are no VACCO-authorized sources, such as re-sellers or subcontractors, that manufacture or repair the HDC units. The requirement is for the supply the services of VACCO technician(s) to provide all required material support to accomplish the repairs to the port and starboard HDC pressurization and vent valve assemblies. The Statement of Work (SOW) encompasses the material, technicians and mechanics, management, supervision, and transportation necessary to clean, repair, test and certify the repair of HDC valves 13/15, and 14/16 satisfactorily meeting all technical and operational specifications in accordance with VACCO drawings and applicable Submarine Maintenance Standard(s). The NAICS Code will be 332912. The proposed contract action is for the procurement of services for which the Government intends to solicit and negotiate with one or a limited number of sources under the authority of FAR 6.302-1. Interested persons may identify their interest and capability to respond to this requirement. For proprietary reasons, the only source is the original equipment manufacturer (OEM), VACCO Industries (CAGE: 99517), a large business. This notice of intent is not a request for competitive proposals. This notice is for informational purposes only. Solicitation documents are not available at this time. A determination of the Government not to compete this proposed contract action based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.