Quanta 650 Electron Microscope - Inspection, PM, Calibration , and Unscheduled Corrective Repairs.

This sources sought notice, issued by the Department of Defense for the Portsmouth Naval Shipyard in Kittery, Maine, seeks capabilities for the inspection, scheduled annual preventative maintenance, calibration, and unscheduled corrective repairs of a Thermo Fisher Scientific/FEI Quanta 650 Electron Microscope. The scope of work requires adherence to the Thermo Fisher Scientific/FEI Quanta 650 Instruction Manual (Rev C, 2020) and mandates that magnification calibration be performed in compliance with ASTM E766 standards using ISO 17025 certified calibration standards. Key deliverables include a test/inspection report (CDRL A001), a calibration certificate (CDRL A002), and a condition found report (CDRL A003) if repairs are identified. Inspection and preventative maintenance reports must be submitted within three business days of performance completion. The contractor must comply with rigorous safety and environmental regulations, including OSHA 29 CFR 1910 for occupational and electrical safety, radiation safety guidelines for high-voltage electron column operation, and lock out/tag out procedures. Personnel are required to utilize personal protective equipment in accordance with OSHA CFR 1926 and CFR 1915. Administrative requirements include the negotiation of procedures for over and above work requests per DFARS 252.217-7028. As this is a sources sought notice under NAICS code 811210, interested parties are requested to provide a capabilities statement and any applicable certifications or testing procedures.