Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Post-Installation Radiation Survey

Open

Federal

Response Deadline11/25/2026, 02:00:00 PM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Fleet Readiness Center

NAICS

541620 - Environmental Consulting Services

Place of Performance

San Diego, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of N68520-27-RFPREQ-KN00000-0078.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Computed Topography (CT) X-Ray Cabinet Sources Sought

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 02:00:00 PM PSTin 15 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Fleet Readiness Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Fleet Readiness Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs certified radiation leakage surveys for prime contractors on NAVAIR projects. Uses calibrated detection instruments to verify radiation leakage does not exceed 0.5 mR/hr at 5 cm from the outer surface per DODI 6055.08 and 29 CFR 1910.1096(d). Provides recommended periodic survey procedures for the end user. Delivers a certified Post-Installation Radiation Survey Report.

Similar Contracts

Same NAICS industry code

Medical Device Packaging and Labeling Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

HUD-Compliant Energy AuditThis subcontract involves performing a full energy audit of a housing portfolio for prime contractors working on Housing Authority of Danville projects in Danville. The selected provider will conduct comprehensive energy usage analyses and building envelope inspections utilizing blower door equipment and thermal imaging to identify potential energy-saving measures and calculate the return on investment for proposed improvements. All work must strictly adhere to 24 CFR 965.302 standards to ensure HUD compliance. The final deliverable is a detailed Energy Audit Report outlining recommended efficiency upgrades. Interested parties must submit their responses by December 18, 2026, under NAICS code 541620.

Housing Authority of Danville

POSTED

about 5 hours ago

DEADLINE

in about 1 month

SFI 2022 Forest Management Standard Auditing ServicesThis subcontract involves providing professional certification and surveillance audits for prime contractors working on projects for the Florida Department of Agriculture and Consumer Services. The selected provider will perform desk and field audits of conservation forestry lands to ensure compliance with SFI 2022 Standards, ISO/IEC 17021-1, and ISO/IEC TS 17021-2. Key deliverables include the creation of finalized audit plans and the submission of annual certification and surveillance audit reports. To qualify, the contractor must hold ANAB accreditation and possess the necessary equipment to access remote forest locations. This opportunity falls under NAICS code 541620 and was posted on November 10, 2026, with a response deadline of December 3, 2026.

Department of Agriculture and Consumer Services

POSTED

about 8 hours ago

DEADLINE

Sustainable Forestry Initiative Forest Management Standard

Solicitation # ITB FFS 26 27 71

The Florida Department of Agriculture and Consumer Services is seeking competitive bids for audit services to maintain the Florida Forest Service certification under the Sustainable Forestry Initiative (SFI) 2022 Forest Management Standard. The scope of work involves conducting one certification audit and four surveillance audits from 2027 through 2031 for 505,348 acres across the Blackwater River, Four Creeks, Jennings, John M. Bethea, and Tate’s Hell state forests. These audits must be performed by certification bodies accredited by the ANSI National Accreditation Board (ANAB) and adhere to SFI 2022 Standards and Rules as well as ISO/IEC 17021-1 and ISO/IEC TS 17021-2. The initial term of the contract is five years, with a possible renewal for an additional five years, not to exceed a total of ten years. The contract will be awarded to the responsive and responsible vendor offering the lowest Initial Term Total Price. Bidders must submit sealed responses by December 3, 2026, including a signed acknowledgement form and price sheet. Required certifications include E-Verify registration, lobbying and debarment disclosures, and proof of general liability, automobile, and worker's compensation insurance. Final reports and invoices are due by May 15th of each year, and payments are subject to annual legislative appropriation and a 1.0% transaction fee. Preference in the event of tie-breaking may be given to certified business enterprises, veteran-owned businesses, or Florida-based producers.

Department of Agriculture and Consumer Services

POSTED

about 8 hours ago

DEADLINE

Ordnance Electrostatic Discharge (OES) & Electrical Safety SpecialistThis small business set-aside subcontract with the Department of Defense, specifically for the NSWC Indian Head Division, requires an Ordnance Electrostatic Discharge and Electrical Safety Specialist. The selected provider will perform critical electrostatic discharge analysis and electrical safety assessments for prime contractors working on ordnance projects. Key technical responsibilities include conducting ESD testing through schematic reviews and analyzing grounding and bonding within explosive environments in strict accordance with MIL-STD-1686 and ANSI/ESD S20.20 standards. In addition to technical analysis, the contractor is responsible for the maintenance of ESD Lab equipment and the delivery of essential documentation, including ESD data sheets, Tech Agent recommendation letters, and OES assessment reports. The opportunity is categorized under NAICS code 541620, with a response deadline of November 24, 2026, and performance located in zip code 20640.

Nswc Indian Head Division

POSTED

about 10 hours ago

DEADLINE

H941--Chemical Hoods & HEPA PM

Solicitation # 36C25027Q0065

Solicitation 36C25027Q0065 is a request for quotation issued by the Department of Veterans Affairs Network Contracting Office 10 for the preventive maintenance, testing, and certification of chemical hoods and HEPA filters at the Richard L. Roudebush VA Medical Center in Indianapolis, Indiana. This procurement is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), and awardees must certify compliance with subcontracting limitations, ensuring no more than 50 percent of the contract value is paid to non-SDVOSB or non-VOSB firms. The scope of work includes quarterly prefilter service, annual HEPA service, diffuser cleaning, and detailed reporting for various systems, with a base period of performance from November 15, 2030, to November 14, 2031, and an additional option period through May 14, 2032. The government will evaluate offers based on technical rating, price, and past performance, reserving the right to accept other than the lowest offer. A mandatory site visit was required for offer submission. Key deliverables include a Quality Control Plan and safety plan within 10 business days of award, and a reconciled electronic inventory within 30 calendar days. The contractor must provide firm-fixed pricing for recurring services and optional HEPA filter replacements. All work must adhere to strict technical standards, with results clearly labeled as pass, fail, or restricted, and supported by raw readings and calibrated instrumentation data. Invoices are to be submitted in arrears through the VA-designated electronic process.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 10 hours ago

DEADLINE

Core Environmental Compliance Support Services – Darby Military Community (DMC), USAG Italy

Solicitation # PAN41426P0000025815

Solicitation W912PF27QA006 seeks a firm fixed price contract for non-personal Core Environmental Compliance Support services for the Directorate of Public Works Environmental Division at the United States Army Garrison Italy Darby Military Community. The contractor will serve as an independent consultant providing technical, professional, and management support for environmental programs. Key responsibilities include compliance monitoring of engineering plans and SOPs, developing a Sustainment and Optimization plan, and providing technical deliverables in both English and Italian for coordination with local authorities. The contract is structured with a base period from February 24, 2027, to February 23, 2028, followed by four optional extension years ending February 23, 2032. The acquisition utilizes a Lowest Price Technically Acceptable (LPTA) source selection process, where the award is granted to the lowest priced quote that meets all mandatory technical criteria. Evaluation factors include personnel resumes, company experience, and past performance, with a specific requirement for two relevant projects completed within the last five years. Proposals must be submitted in three PDF volumes with strict page limits for mission capability factors. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and mandatory SAM.gov registration with a Unique Entity Identifier and NCAGE code. Key personnel, including the Program Manager and on-site staff, must be submitted for approval, and the contractor must adhere to strict cybersecurity and background check regulations.

0414 Aq Hq Contract Augmented

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Etiwanda Heights Neighborhood & Conservation Plan

Solicitation # SCH#2017091027

The City of Rancho Cucamonga is implementing an amendment to the Etiwanda Heights Neighborhood and Conservation Plan to align the approximately 790-acre Neighborhood Area with the maximum residential density of 8 dwelling units per acre established in the 2021 General Plan Update. This project specifically focuses on 742.54 acres controlled by the master developer, Previti Group, while leaving the 3,603-acre conservation area unaffected. The amendment introduces nine new building types, including duplexes, quadplexes, and cottage courts, and modifies objective development standards for various house sizes and commercial shops. It also updates regulating zones, introduces new open space standards, adds a shared yard frontage type, and establishes new block configurations. Additionally, a formal mechanism for transferring development rights within the Neighborhood Area is being created to facilitate residential clustering and protect existing neighborhoods. As part of this effort, the City is approving a tentative tract map and modified site plans for Planning Areas 1 and 2 to subdivide the land into buildable parcels for immediate development. The project has been processed under CEQA guidelines, with a Notice of Determination certifying that the project will not have a significant environmental effect based on an addendum to the 2019 Environmental Impact Report. The overall goal of these adjustments is to support the City's housing objectives while preserving scenic foothill views and enhancing community amenities.

City of Rancho Cucamonga

POSTED

about 14 hours ago

DEADLINE

Legacy Ranch Project

Solicitation # 2025110456

The Legacy Ranch Project is a development initiative by the City of San Juan Capistrano involving a 65.5-acre site within the Northwest Open Space Specific Plan Area. The project requires an amendment to the specific plan to allow for the creation of seven distinct community cores: Equestrian, Chapel, Swanner House, Agricultural, Event Barn, Community Building, and Trails/Natural. These cores will feature amenities such as equestrian caretaker residences, farm stay units, retail farm stands, and event venues. A primary objective of the project is the preservation and enhanced accessibility of existing site uses, including the Swanner House, Putuidem Village, and the Dr. John Cortese Dog Park. The project is subject to extensive environmental and regulatory oversight under the California Environmental Quality Act (CEQA). Comprehensive studies have been conducted, including a Phase I and II Environmental Site Assessment to identify soil and groundwater contamination, a Health Risk Assessment for construction activities, and a Fire Behavior Report to ensure compliance with wildland interface codes. Additional critical analyses include a Traffic Impact Analysis, a Preliminary Water Quality Management Plan, and archaeological surveys to protect tribal cultural resources in coordination with the Native American Heritage Commission. The project involves coordination with multiple agencies, including Caltrans and the California Department of Fish and Wildlife, to mitigate impacts on biological resources and regional transportation.

City of San Juan Capistrano

POSTED

about 14 hours ago

DEADLINE

Second Supplemental Recirculated Environmental Impact Report (SSREIR) for Revisions to Title 19- Kern County Zoning Ordinance (2024) focused on oil and gas

Solicitation # PLO26-01443

Project PLO26-01196 is a ministerial oil and gas well rework project located in the unincorporated area of Kern County, California, specifically at location 085-220-226. The scope of work involves reworking existing well 515S2-34, with specific activities including the isolation of perforations and the repair of casing. The project is designated as an O&G Conformity Review Minor Rework and does not include the installation of any new pipelines. The project is approved by the Kern County Planning and Natural Resources Department and is exempt from environmental review under Sections 21080(b)(1) and 15268 of the State CEQA Guidelines, as it is considered a ministerial action under the Kern County Zoning Ordinance. The notice for this project was received for filing on September 8, 2026. Craig M. Murphy, Director of the Kern County Planning and Natural Resources Department, serves as the primary contact for the project.

POSTED

about 14 hours ago

DEADLINE

Erosion Control and SWPPP ManagementThis subcontract focuses on the delivery of erosion control engineering services and Stormwater Pollution Prevention Plan management for prime contractors. The scope of work specifically supports the IEUA Regional Water Recycling Plant No. 5 and Butterfield Lift Station projects, ensuring the implementation of compliant erosion control systems and the submission of required SWPPP reports. The contract is issued by Norstar Plumbing and Engineering, Inc. and is designated for SBA certified HUBZone Small Businesses and Disadvantaged Business Enterprises under NAICS code 541620. The solicitation was posted on November 10, 2026, with a response deadline of November 19, 2026.

Norstar Plumbing and Engineering, Inc

POSTED

about 15 hours ago

DEADLINE

Environmental Permitting & Regulatory ConsultingThis subcontract for Environmental Permitting and Regulatory Consulting supports prime contractors on water infrastructure projects for Bay County Utility Services in Florida. The selected provider will be responsible for preparing and managing applications for construction and environmental permits, specifically coordinating with the Florida Department of Environmental Protection and the Northwest Florida Water Management District regarding drinking water, stormwater, and NPDES permits. Additional responsibilities include managing NEPA and EHP reviews as well as FDEP storage tank registrations to ensure all approved permits are delivered. Interested parties must respond by December 15, 2026, for this opportunity categorized under NAICS code 541620.

Utility Services

POSTED

about 16 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Fleet Readiness Center

Same awarding agency

CT Image Analysis and System Training

Other Scientific and Technical Consulting Services

POSTED

about 10 hours ago

DEADLINE

Industrial Electrical Installation

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 10 hours ago

DEADLINE

Heavy Equipment Rigging and Delivery

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

CT X-Ray Cabinet System Supply

Irradiation Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

Computed Topography (CT) X-Ray Cabinet Sources Sought

Solicitation # N68520-27-RFPREQ-KN00000-0078

The Naval Air Systems Command (NAVAIR) is conducting market research to identify capable firms for the procurement of a Computed Tomography (CT) X-Ray Cabinet system to be installed at FRCSW North Island, CA. This effort is intended as a single-award Firm Fixed Price contract with a delivery timeline of 365 days after contract award. The requirement is classified under NAICS code 334517 (Irradiation Apparatus Manufacturing) and PSC 6635. The contractor will be responsible for a turn-key solution including the provision, rigging, installation, and testing of the CT system, as well as providing onsite training for up to six engineers and technicians. Technical specifications require the system to achieve a voxel resolution of 6 microns or better on a 0.5-inch part and maintain radiation leakage below 0.5 mR/hr at 5 cm from the outer surface. The system must comply with various safety and electrical standards, including 21 CFR 1020.40, NFPA 70, and DODI 6055.08. Offerors must possess CMMC Level 1 (Self) certification and meet basic safeguarding requirements for covered information systems. Interested parties must submit a capability statement no later than November 25, 2026, detailing their business size, corporate experience, and ability to meet the technical and facility requirements outlined in the draft Statement of Work.

Irradiation Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

FRCSE Information Monitoring and Protection Services - Modular Project

Solicitation # N6852027Q1007

Security Guards and Patrol Services

POSTED

DEADLINE

FRCSW Hoist Requirement

Solicitation # N68520-27-RFPREQ-KN00000-0154

The Naval Air Systems Command (NAVAIR), Commander, Fleet Readiness Centers (COMFRC) is conducting market research to identify capable firms for the analysis, evaluation, procurement, replacement, upgrade, and repair of weight handling systems at Fleet Readiness Center Southwest (FRCSW) in San Diego, California. The scope of work encompasses the evaluation of building structures, hangers, runway rails, control systems, and various hoist types, including monorails, bridge cranes, jib cranes, and gantry cranes. The government intends to utilize an Indefinite Delivery/Indefinite Quantity (IDIQ) contract with Firm Fixed Price (FFP) CLINs, featuring a five-year ordering period expected to begin in the fourth quarter of FY 2027. Technical requirements mandate that all weight handling system designs be certified by a California registered professional engineer. Contractors must adhere to strict safety and quality standards, including OSHA 29 CFR 1910 and 1926, US Army Corps of Engineers EM 385-1-1, and NAVFAC P-307. From a security and compliance perspective, offerors must maintain CMMC Level 1 certification and meet FAR 52.240-93 basic safeguarding requirements. Interested firms, regardless of size, are invited to submit capability statements by December 14, 2026, demonstrating their ability to perform the required services as a prime contractor or joint venture.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Intent to Sole Source X-Ray Spectrometer Preventative Maintenance

Solicitation # 27SIMACQJC000000109

The Fleet Readiness Center, under the Department of Defense, intends to award a sole source purchase order to Oxford Instruments America, Inc. for annual preventative maintenance of an X-Ray Spectrometer at FRC Southeast in Cherry Point, North Carolina. This procurement is being conducted on a sole source basis because Oxford Instruments America, Inc. is the original equipment manufacturer and the only known source capable of satisfying the agency's requirements. The expected period of performance for these services is one year. While this notice is not a request for competitive quotes, responsible sources may submit a capability statement within five calendar days of the publication date for review. The government will use any submitted information solely to determine if a competitive procurement process is necessary. The solicitation is identified by number 27SIMACQJC000000109 and falls under NAICS code 811310.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Sources Sought Depot Level Maintenance at FRCE

Solicitation # N68520-26-RFPREQ-JC00000-0175

The Commander, Fleet Readiness Center (COMFRC) is conducting market research via a Request for Information to identify qualified 8(a) vendors for Depot Level Maintenance (DLM) support at Fleet Readiness Center East (FRCE) in Cherry Point, North Carolina. This presolicitation, under NAICS code 336411 for Aircraft Manufacturing, seeks contractors to provide workforce support for the rework, manufacturing, evaluation, and quality assurance of aircraft, engines, components, and support equipment. The scope covers a wide array of weapon systems, including the F-35, F/A-18, V-22, and C-130, with performance occurring at MCAS Cherry Point and remote sites at MCAS New River, Global TransPark in Kinston, and MCAS Beaufort, as well as potential CONUS travel for In Service Repairs. The intended contract structure consists of a one-year base period followed by four option periods. As this is a sources sought effort, the government is requesting capability statements from registered 8(a) concerns, including their CAGE code, business size, and a brief statement of qualifications not exceeding five double-sided pages. Award eligibility requires active SAM registration with the applicable NAICS code. The resulting contract will mandate strict adherence to various Navy and Department of Defense regulations, including NIST 800-171 cybersecurity standards, specific marking for classified and controlled unclassified information, and the FRC East Quality Assurance Program. Performance will be managed through government-provided production schedules and work assignments rather than a single final deliverable.

Aircraft Manufacturing

POSTED

DEADLINE

Test & Measurement Equipment Calibration (METCAL)This 8(a) set-aside subcontract focuses on providing Test and Measurement Equipment Calibration (METCAL) services for prime contractors supporting Fleet Readiness Center East projects. The primary objective is to ensure measurement accuracy by adjusting and verifying fleet test sets against traceable national standards, ultimately delivering calibrated equipment accompanied by official certifications of accuracy. The work will be performed in Cherry Point, North Carolina, under NAICS code 811210 for the Department of Defense. Interested parties must note the response deadline of November 18, 2026, for this specialized technical requirement.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Precision Aviation Parts ManufacturingThe Precision Aviation Parts Manufacturing subcontract involves the fabrication of non-standard aircraft component parts and items for prime contractors supporting Fleet Readiness Center East projects. Utilizing precision machining and fabrication, the contractor is responsible for producing parts that adhere to strict aerospace tolerances and government drawings to fill gaps in standard supply chains. This opportunity is designated as an 8(a) set-aside under NAICS code 336413 for the Department of Defense. The work will be performed in Cherry Point, North Carolina, with a response deadline set for November 18, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aviation Modification & Modernization ServicesThe Aviation Modification and Modernization Services subcontract involves providing modification functions for prime contractors on Fleet Readiness Center East projects. The primary objective is to enhance design performance and reliability through the alteration, conversion, and modernization of fleet assets, including aircraft, engines, and components. These tasks are executed by implementing engineering changes and modernization kits in strict accordance with government technical data to deliver updated assets. This opportunity is designated as an 8(a) set-aside under NAICS code 336411 for the Department of Defense. The work is to be performed in Cherry Point, North Carolina. Interested parties should note the posting date of November 4, 2026, with a response deadline set for November 18, 2026.

Aircraft Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS