POVIDONE-IODINE CLEANS
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
POVIDONE-IODINE CLEANSING SOLUTION, USP, with 7.5% active ingredient, is designated for external use only and must be delivered with at least 31 months of shelf life remaining from a total 36-month expiration period. The product is packaged in 1-gallon bottles, identified by unit of issue BT, and must be stored at 25°C (77°F) with permitted excursions between 15°C and 30°C (59°F to 86°F). It is regulated by the FDA and classified as a hazardous material under Federal Standard No. 313-E, requiring suppliers to provide Safety Data Sheets and Hazard Communication Standard-compliant labels in accordance with 29 C.F.R. 1910.1200. Employee training on these requirements is mandatory. Packaging must meet DLA’s Master List of Technical and Quality Requirements, including RP001 for packaging and RQ011 for removal of government identification from non-accepted supplies, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1. All units must be sealed, commercially packaged, and palletized per DLA guidelines to ensure safe transport under the lowest possible freight rates. The contract specifies two line items totaling 7 gallons (2 BT + 5 BT), both with identical product specifications, delivery requirements, and compliance obligations. Delivery is FOB destination within 20 days, with zero quantity variance permitted and inspection and acceptance occurring at the destination. Two delivery points are listed: one in San Diego, California, for USNS JOHN GLENN and another in Norfolk, Virginia, for USNS CODY. Shipments must use the fastest traceable means, explicitly prohibiting parcel post. Each shipment must be labeled with RDD 777, project codes, and government-specific identifiers, and the original required delivery date is July 22, 2026. The contract is issued under solicitation SPE2DP-26-T-4200, referencing NSN 6505-00-994-7224 and approved manufacturer part numbers from Cardinal Health and Purdue Pharma. All technical, quality, and packaging requirements take precedence over any commercial standards not explicitly endorsed by the DLA.
General Info
Agency
NAICS
Place of Performance
2798 HARBOR DRIVE BLDG 15 ROOM 204, SAN DIEGO, CA, 92113-3650, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
POVIDONE-IODINE CLEANSING SOLUTION,USP. 7.5% ACTIVE INGREDIENT; FOR
EXTERNAL USE ONLY.. U/I: "BT" (1 GALLON BOTTLE). TOTAL SHELF LIFE IS
36 MONTHS. AT LEAST 31 MONTHS SHELF LIFE SHALL REMAIN AT THE TIME OF
DELIVERY TO THE FIRST GOVERNMENT ACTIVITY. STORE AT 25° (77°F);
EXCURSIONS PERMITTED 15-30° C (59-86 DEG F). 5/11/17.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
SPE2DP-26-T-4200
SECTION B
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html MARK IN ACCORDANCE WITH MMS No. 1B 30 March 2017 1 BT = 3 EA
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
CARDINAL HEALTH 200, LLC 07TA6 P/N 676180151 PURDUE PHARMA LP 3LEA3 P/N NDC67618-0151-01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017540708 0001 BT 2.000
NSN/MATERIAL:6505009947224
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
SPE2DP-26-T-4200
SECTION B
PR: 7017540708 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N41037
USNS JOHN GLENN T-ESD 2
SUPSHIP BATH DET SAN DIEGO
2798 HARBOR DRIVE BLDG 15 ROOM 204
SAN DIEGO CA 92113-3650
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N41037
USNS JOHN GLENN T-ESD 2
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N410376197S220
RDD: 777
PROJ: HJ5 TP 2
SUPP ADD: Q93690 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 07
DIC: A4A DIST: H9B ADV: 2A FC: XP
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DP-26-T-4200
SECTION B
PR: 7017540704 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017540704 0001 BT 5.000
NSN/MATERIAL:6505009947224
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N29797
USNS CODY T-EPF-14
UNIT 100126 BOX 1
FPO AE 09591-2600
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N29797
USNS CODY T-EPF-14
SPE2DP-26-T-4200
SECTION B
PR: 7017540704 PRLI: 0001 CONT’D
MSC WAREHOUSE
1968 GILBERT ST. BLDG: W-143, DWY10
NORFOLK VA 23511
US
M/F: (TCN) N297976197S520
RDD: 777
PROJ: HK5 TP 2
SUPP ADD: YNENGR SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: 9B ADV: 2A FC: E2
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE2DP-26-T-4200 NSN/Part Number: 6505-00-994-7224 Quantity: 2 BT Purchase Request: 7017540708QTY: 2 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Same awarding agency
