Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Power Cable Assembly Supplier (NSN 6150-01-643-4856)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of four power cable assemblies, specifically NSN 6150016434856, to support prime contractors under DLA supply contracts. The work is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The supplier must adhere to strict quality and regulatory standards, including the use of zero-based sampling plans per MIL-STD-1916 or ASQ H1331 and the maintenance of ISO 9001:2015 inspection systems. Additionally, the contractor is required to ensure full compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity regulations.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6564.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, POWE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 25

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies power cable assemblies for prime contractors on DLA supply contracts. Manufactures or procures cable assembly NSN 6150016434856 using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Ensures compliance with the Buy American Act and Berry Amendment. Requires ISO 9001:2015 inspection systems and DFARS cybersecurity compliance. Delivers 4 units of power cable assemblies.

Similar Contracts

Same NAICS industry code

Supplier of Push-Button Switches (NSN 5930-15-110-5922)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Power Transformer Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Electrical Component (NSN 6150-01-640-6827)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE4A6-27-T-6733

Solicitation SPE4A6-27-T-6733 is a Request for Quotations issued by the DLA Weapons Support ASC Commodities Division for one branched electrical power cable assembly, identified by NSN 6150-01-679-4318. The item is to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with a required ship date of July 7, 2027. While this is not a small business set-aside, a price evaluation preference is available for certified HUBZone Small Business Concerns. The contract imposes strict technical and quality standards, requiring compliance with the DLA Master List of Technical and Quality Requirements, ISO 9001:2015, and SAE AS9100. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and adhere to ITAR or EAR export controls. Packaging must follow MIL-STD-2073-1E, specifically requiring the item to be coiled to a 13-inch diameter, and marking must comply with MIL-STD-129. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to NIST SP 800-171 and CMMC Level 2 cybersecurity standards. The procurement also incorporates the Buy American Act and Berry Amendment domestic sourcing restrictions. Inspection and acceptance will occur at the point of origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

RETAINER, BATTERY

Solicitation # SPE7L7-27-T-0379

POSTED

about 3 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE4A6-27-T-6771

Solicitation SPE4A6-27-T-6771 is a fixed-price contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of nine electrical power cable assemblies, identified as NSN 6150-01-625-7253 and General Dynamics Mission Systems part number 09-2834292-1. This item is classified as a Commercial Off The Shelf product under NAICS code 335311. The required delivery date is August 22, 2027, with shipping terms set as FOB Origin and delivery to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and compliance with the Buy American Act and Berry Amendment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7L7-27-T-0385

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1551

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

CABLE ASSEMBLY-SWIT

Solicitation # SPE4A0-27-T-0301

Solicitation SPE4A0-27-T-0301 is issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of two units of Cable Assembly-Swit, identified by NSN 6150-01-733-1778. The requirement is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone small businesses. Delivery is required within five days after receipt of order, with the place of performance and delivery located in Vilseck, Germany. Inspection and acceptance will occur at the point of origin. The contract mandates strict quality and technical compliance, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. Due to the nature of the technical data, offerors must possess an approved JCP certification and DLA authorization to access export-controlled data subject to ITAR or EAR regulations. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific requirements for caps or plugs on one end. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment compliance, and safeguarding covered defense information. Offerors must also disclose the use of any non-domestic materials and certify compliance regarding covered defense telecommunications equipment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-6567

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M2-27-T-0363

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

WIRING HARNESS, BRANCHE

Solicitation # SPE7L4-27-T-0635

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Blind Rivets (NSN 5320013069799)

Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Cable Assembly (NSN 5995-01-722-5997)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320011953006)This subcontract involves the manufacture or sourcing of 12 blind rivets, specifically NSN 5320011953006, to support prime contractors on DLA Weapons Support ASC projects. The components must adhere to strict technical specifications, including ASME B46.1 for surface roughness and ASME Y14.5 for dimensioning. Additionally, the contractor is responsible for ensuring part marking follows MIL-STD-13 and packaging meets ASTM D3951 and MIL-STD-129 standards. The selected provider must maintain a quality system certified under SAE AS9003 or ISO 9001 and ensure full compliance with the Buy American Act. Final delivery of the units is required FOB Origin to DLA Distribution San Joaquin in Tracy, California. This procurement is managed under NAICS code 332510 for the Department of Defense.

Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supplier of Continuous Thread Rods (NSN 5306-01-067-4294)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Defense Packaging and Marking ServicesThe Defense Packaging and Marking Services subcontract involves providing specialized packaging and military-standard marking for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires strict adherence to ASTM D3951 and RP001 for packaging, while bare item marking and labeling must comply with MIL-STD-129 and RQ017. The contractor must utilize MIL-SPEC materials and industrial marking equipment, demonstrating a thorough understanding of the DLA Master List of Technical and Quality Requirements. All completed and packaged products are to be delivered to the DLA Distribution Depot located at Hill AFB. This opportunity falls under NAICS code 339999 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 2, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

Quality Testing Laboratory – First Article Test (FAT)This subcontract involves providing Quality Testing Laboratory services to perform First Article Testing for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary objective is to validate manufacturing processes by verifying material properties and dimensions against Reference Drawing NR 81755 C2989, Revision H. All measurements must be conducted using CMM, calipers, and micrometers calibrated to national standards, and the performing entity must maintain ISO/IEC 17025 certification. The scope of work requires the delivery of a certified sample part and a formal First Article Test Report. Performance will take place at Hill AFB, and the project falls under NAICS code 541380. Interested parties should note the response deadline of November 2, 2026.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Precision Manufacturer – Self-Locking Blind Rivet NutsThis subcontract involves the manufacture of four self-locking blind rivet nuts under NSN 5310015876047 for the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to TDP Rev A Gen 1 and Reference Drawing NR 81755 C2989, Revision H, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Performance will take place at Hill AFB. Qualified contractors must possess precision machining capabilities and maintain either SAE AS9003 or ISO 9001 certification, along with CMMC Level 2 compliance. All materials used in production must comply with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Gland Nut Assembly (NSN 5310011045583)

POSTED

about 3 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306014652418)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Panel Screw Assemblies

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supplier of Critical Application Socket Head Cap ScrewsThis subcontract involves the supply of 60 high-precision socket head cap screws, identified by NSN 5305009572394, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The screws must feature type VI cylindrical heads and strictly adhere to NAS1352-16-36P and FF-S-86J standards. To ensure compliance with federal regulations, all materials must meet the requirements of the Buy American Act and the Berry Amendment. Quality assurance is a critical component of the agreement, requiring sampling performed according to MIL-STD-1916 or ASQ H1331. Additionally, packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The performance of this contract is centered in San Diego, California, under NAICS code 332722, with a response deadline set for November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Electrodes (NSN 5977-01-203-7800)

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS