Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Power Distribution Panel Supply

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A military-spec power distribution panel is being procured under a small business set-aside subcontract for delivery to the USS GRIDLEY DDG 101 at FPO AP 96666 with free on board destination terms. The contract requires full compliance with military specifications for the panel, including proper packaging, labeling, and marking to meet naval standards for operational use onboard ship. The solicitation is open to small businesses only as defined by the SBA’s Total Small Business Set-Aside provisions under FAR 19.5, and the NAICS code 335312 identifies the industrial classification for electrical equipment manufacturing. The response deadline is August 13, 2026, with the solicitation posted on August 2, 2026, through the DLA Dibbs portal, and performance is expected at the designated FPO address which corresponds to the vessel’s operational location. No point of contact is listed, and the agency handling the procurement is the Maritime Supply Chain ESOc Buys under the Department of Defense.

General Info

Small business procurement of military-spec power panel for USS GRIDLEY, due August 13, 2026, FPO AP 96666.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

FPO, AP, 96666, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a military-spec power distribution panel with proper packaging, marking, and delivery to a U.S. Navy vessel at FPO AP 96666 (USS GRIDLEY DDG 101) FOB destination.

Similar Contracts

Same NAICS industry code

Supply of Alternating Current Motors (Commercial Off-The-Shelf)The contract requires the procurement, packaging, labeling, and delivery of three new alternating current motors with NSN 6105-01-508-7921, all of which must meet Department of Defense and Defense Logistics Agency standards. This includes strict adherence to military-grade packaging protocols, proper hazardous materials handling, and accurate labeling in compliance with federal regulations. The motors are classified as commercial off-the-shelf items, indicating they are readily available from existing commercial suppliers without customization. Work must be completed and delivered to the specified place of performance in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. This is a subcontract under the Maritime Supply Chain organization within the Department of Defense, classified under NAICS code 335312 for electric motor, generator, and transformer manufacturing. All activities must ensure full traceability, documentation, and readiness for military logistics systems without exception.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Supply of Military-Grade Starter Motor (NSN 6110017187461)The contract mandates the supply of two military-grade starter motors identified by NSN 6110017187461 and part number S801V65N3S, engineered to meet rigorous Department of Defense technical specifications. All units must adhere to MIL-STD-129 for packaging and labeling, comply with environmental standards prohibiting Class I ozone-depleting substances, and fulfill all DLA-mandated requirements for quality, durability, and traceability in defense applications. The deliverables are destined for performance at Tracy, California, with a delivery deadline aligned to the contract’s response due date of August 13, 2026. The solicitation, issued under the NAICS code 335312 for electric motor and generator manufacturing, is classified as a subcontract and falls under the jurisdiction of the Fluid Handling Division within the Department of Defense. The procurement is open for bids through the DIBBS platform, with no set-aside designation or specific small business preferences indicated.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Circuit Breaker Supply and Material ProcurementThe contract entails the supply of 36 military-grade circuit breakers identified by NSN 5925014938123 and part number AM2R-A8-LC-07-D-A-30-10, all of which must meet strict technical and quality standards set by the Defense Logistics Agency. These components are critical for defense systems and require full compliance with DLA specifications to ensure operational reliability and safety in demanding environments. The procurement is structured as a subcontract under the NAICS code 335312, indicating it falls within the manufacture of electrical equipment for military or specialized use. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, allowing potential suppliers a limited window to submit proposals. Performance of the contract is centered at New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the delivery and possibly inspection location for the units. The contract is managed by the Active Devices Division under the Department of Defense, emphasizing its strategic importance within the military supply chain. All bids must be submitted through the official DIBBS platform via the provided UI link to be considered valid.

ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

Motor Starter Supply (P/N S801V50N3S)The contract solicits the supply of a commercial off-the-shelf motor starter with part number S801V50N3S and national stock number 6110017187462, manufactured by Eaton Corporation, to meet federal defense technical, packaging, labeling, and safety requirements. The item is intended for use by the Department of Defense under the Fluid Handling Division, with performance location set at Tracy, California, zip code 95304-5000. The solicitation is classified as a subcontract under NAICS code 335312, and the posting date is August 2, 2026, with proposals due by August 13, 2026. All deliverables must comply with applicable military specifications and standards without customization, ensuring readiness for immediate deployment and integration into defense systems.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-296S

This contract specifies the procurement of a starter motor identified by NSN 6110017187462 and part number S801V50N3S from Eaton Corporation, with a quantity of three units to be delivered FOB origin within 126 days, with no tolerance for variance in quantity. The item is designated as a critical application item, and strict compliance with DLA’s Master List of Technical and Quality Requirements is required, which overrides all other specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Delivery is to be made to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract enforces DLA’s authorized unit of issue and references official DLA guidance for unit conversion. All technical and quality standards referenced take precedence over general standards, and the requirement for government identification removal from non-accepted supplies is in effect. The solicitation number is SPE7M4-26-T-296S, with a response deadline of August 13, 2026, and the item falls under NAICS code 335312 for motor vehicle electrical and electronic equipment manufacturing.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

MOTOR, ALTERNATING C

Solicitation # SPE7M1-26-T-244M

The contract pertains to the procurement of three alternating current motors identified by NSN 6105-01-508-7921 under solicitation SPE7M1-26-T-244M, with a required delivery within 144 days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware unless specifically exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The alternate offeror is required to submit a complete data package detailing both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with solicitation issued on August 2, 2026, and responses due by August 13, 2026. Performance is to occur in San Diego, California, and inquiries may be directed to Michael Reese at the provided contact information.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-26-T-244K

This contract is for the procurement of two alternating current motors with part number 5KS254NS271HA and NSN 6105-01-354-2819 under solicitation SPE7M1-26-T-244K, issued as a total small business set-aside. The motors must comply with DLA packaging and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific provisions for measuring and test equipment, removal of government identification from non-accepted supplies, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The item is classified as a critical application and is subject to strict prohibitions on the intentional introduction of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is required FOB origin in 382 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with unit packaging code U and marking per MIL-STD-129 without special codes. The shipment must be palletized according to DLA requirements and delivered to the specified warehouse in Tracy, California. The original required delivery date is October 14, 2026, with a need ship date of August 31, 2027. The contract includes transportation instructions per DLAD procedural notes C19 and C20, and the unit of issue is each.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

MOTOR, ALTERNATING C

Solicitation # SPE7M9-26-T-0034

This contract pertains to the procurement of seven alternating current motors, part number 801625-575-1, under NSN 6105-01-493-5532, issued by the Department of Defense through the Electrical Devices Division. The solicitation number is SPE7M9-26-T-0034, with a total small business set-aside, and it mandates strict adherence to DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned specific verification levels or AQLs. Mercury and mercury-containing compounds are prohibited unless functionally necessary in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents as defined by NAVSEA, with portable units requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Delivery is required FOB origin within 53 days of contract award, with a firm delivery date of October 6, 2026, and a required arrival date of January 15, 2027. Quantity must be exact with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, material codes, and unit container types, with marking per MIL-STD-129 and no special marking required. Palletization follows DLA packaging guidelines, and shipment must be routed to the DLA Distribution facility in New Cumberland, PA, as listed in both parcel post and freight shipping addresses. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the contract includes no bidset availability, requiring full compliance with technical and quality specs as referenced.

ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

MOTOR, UNIVERSAL

Solicitation # SPE7M1-26-T-245X

The contract is for the procurement of two universal motors under NSN 6105-01-558-5135, with a total quantity of two units and a unit price of $2.00, resulting in a total price of $4.00. Delivery is required within 66 days of contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. Strict packaging requirements mandate compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must also conform to RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional use in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, with a required ship date of December 16, 2025, and an original delivery date of December 24, 2025. The solicitation number is SPE7M1-26-T-245X, issued under NAICS code 335312, with point of contact Misty Slone at misty.slone@dla.mil. The contract references the DLA Master List for all technical and quality specifications, with applicable revisions determined by the solicitation or award date depending on procurement type.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

PANEL, POWER DISTRIB

Solicitation # SPE7M0-26-T-025T

The contract solicitation SPE7M0-26-T-025T is for the procurement of one unit of a power distribution panel, identified by NSN 6110016738342 and part number MPD 44000-006, under a total small business set-aside as defined by FAR 19.5. The item is to be delivered FOB destination to USS GRIDLEY DDG 101 at FPO AP 96666 within five days of award, with no variance permitted in quantity. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and hazardous material labeling, with palletization adhering to DLA Packaging Requirements RP001. The contractor is prohibited from intentionally introducing mercury or mercury-containing compounds into the item except in specific allowable applications such as batteries, fluorescent lights, sensors, and weapon systems, and portable devices containing mercury must be shockproof with secondary containment per NAVSEA 5100-003D. Ozone-depleting chemicals are explicitly banned. The pricing is listed at $1.00 per unit, though historical data suggests this may be a placeholder. The contract requires submission via DIBBS by August 13, 2026, and delivery must be coordinated under DLAD Procurement Notes C19 and C20 for vessel and first destination transportation. All invoicing is to be processed through WAWF, and inspection and acceptance occur solely at the destination site. The solicitation incorporates critical safety and environmental clauses from FAR and DFARS including combating trafficking, employment eligibility verification, sustainable products, hazardous material identification, and cybersecurity safeguards for covered defense information. Offerors must provide a UEI and CAGE code, and certify their small business status as well as any applicable socioeconomic designations such as WOSB, SDVOSB, or HUBZone. Special requirements include adherence to the DLA Master List of Technical and Quality Requirements and submission of hazard labeling and MSDS for non-exempt hazardous materials per DFARS clause 252.223-7001. The contract is subject to changes under FAR 52.243-1 and includes clauses on equal opportunity, subcontracting, and intellectual property consent under alternates to 52.227-1. No evaluation factors are

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

CONDITIONER, POWER L

Solicitation # SPE7M1-26-T-245T

The contract pertains to the procurement of six units of a CONDITIONER, POWER L with NSN 6110-01-721-3345 and part number 85-312-1, supplied by MEGGITT SAFETY SYSTEMS INC. The total price is $36.00 at $6.00 per unit, with delivery required FOB origin within 340 days from the contract award, no variance allowed in quantity. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection occurs at destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s packaging requirements, and all labeling must reflect the specified Unit of Issue and Quantity per Unit Pack. The contract incorporates mandatory technical and quality standards from the DLA Master List, which override any conflicting specifications. Cybersecurity compliance is required at CMMC Level 2 through self-assessment, and the item is subject to Covered Defense Information protocols. Transportation and shipping instructions follow DLAD procedural notes C19 and C20. The solicitation was issued under SPE7M1-26-T-245T, with a response deadline of August 13, 2026, and falls under NAICS code 335312 for electrical equipment manufacturing. The primary point of contact is Michael Reese of the Department of Defense, Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-296R

This contract specifies the procurement of two starter motors with part number S801V65N3S and NSN 6110017187461 under solicitation SPE7M4-26-T-296R, issued by the Department of Defense’s Fluid Handling Division. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede any conflicting specifications. The product is prohibited from containing Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specification. Delivery is required FOB origin within 291 days from the contract date with zero quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all specifications from the DLA Master List take precedence over packaging standards. The unit of issue is each, with a total quantity of two, and the total price is defined by the unit price listed in the CLIN. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the delivery must be received by June 1, 2027, with no flexibility on the required delivery date. All packaging and marking must reflect the correct Unit of Issue and Quantity per Unit Pack as specified, and the contractor is required to comply with DLA’s procedures for removing government identification from non-accepted supplies. The contract is issued under the DoD authorized unit of issue system, and reference must be made to the official DLA unit of issue spreadsheet to ensure compliance. Primary point of contact for inquiries is Rory O’Reilly, with solicitation responses due by August 13, 2026, and the procurement falls under NAICS code 335312 for electric motor and generator manufacturing.

FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Military Shipment and Delivery LogisticsThe contract requires the transport and delivery of connector assemblies from the origin point to the Special Operations Forces APT ACTY located in Lexington, KY, under FOB Origin terms, meaning the vendor assumes all costs and responsibilities until the goods are loaded at the point of origin. The delivery must be completed within five business days from pickup, imposing a strict time-sensitive requirement demanding reliable logistics coordination and adherence to military shipment protocols. The shipment is classified under NAICS code 484220, indicating it falls under the category of truck transportation of freight, and is structured as a subcontract within the Department of Defense’s Maritime Supply Chain ESOC Buys program. The solicitation, published on August 2, 2026, must be responded to by August 13, 2026, with performance tied to a specific zip code in Lexington, ensuring precise destination handling. All parties must align with the operational demands of a military installation and ensure the secure and timely movement of critical components.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for connector assemblies and any associated hazardous materials, ensuring full adherence to military and federal regulatory standards. All work must meet strict documentation and procedural requirements to guarantee handling, storage, and transportation safety in accordance with established defense protocols. Performance is scheduled to take place in Lexington, Kentucky, with a zip code of 40516-9723, and the work falls under NAICS code 493190, indicating a focus on other warehousing and storage services specifically tailored to government defense logistics needs. This is a subcontract opportunity issued by the Department of Defense under the MARITIME SUPPLY CHAIN ESOC BUYS organization, with a response deadline of August 13, 2026, and a posted date of August 2, 2026. There is no specified set-aside type, meaning the opportunity is open to all qualifying entities, and the procurement is managed through the DIBBS system. Bidders must be prepared to demonstrate expertise in handling hazardous materials, maintaining compliance with applicable regulations, and ensuring that all labeling and packaging systems meet Department of Defense specifications for durability, identification, and safety in operational environments.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Connector Assembly Supply (NSN 4730-01-214-5824)The contract requires the supply of three connector assemblies identified by NSN 4730-01-214-5824, with full compliance to Department of Defense technical and quality standards as mandated by the Maritime Supply Chain ESOC Buys office. Delivery must be completed within five days of contract award, emphasizing strict adherence to timelines and performance expectations. The items are to be delivered to a specified place of performance in Lexington, Kentucky, with the zip code 40516-9723, and the work falls under NAICS code 335313, indicating classification within the Electrical Equipment and Appliance Manufacturing sector. This is a subcontract opportunity posted on August 2, 2026, with a response deadline of August 13, 2026, and no set-aside provisions are applicable. The solicitation is managed under the broader Department of Defense procurement framework and can be accessed via the DIBBS platform. There is no designated point of contact listed, and no specific organizational type or location for the contracting office is provided beyond the agency name and place of performance. Participation requires full alignment with DLA requirements and the ability to meet an aggressive delivery schedule immediately upon award.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

Component Traceability & Data Package PreparationThe contract requires the compilation of a comprehensive traceability and data package for electronic components, ensuring full compliance with industry and military standards. This includes gathering and documenting all sourcing records, verifying Pb/Pb-Free compliance according to J-STD-609, and formatting the entire data package to meet Department of Defense Defense Logistics Agency specifications. The deliverables must demonstrate rigorous supply chain transparency and adherence to environmental and material regulations critical for defense applications. The work is scoped as a subcontract under NAICS code 541330 and is being managed by the Maritime Supply Chain ESOC Buys division within the Department of Defense. Proposals are due by August 13, 2026, and performance is expected to be conducted at Fort Bragg, North Carolina, with a zip code of 28310-0000. The solicitation was posted on August 2, 2026, and interested parties must submit responses through the DIBBS procurement portal using the provided UI link. No set-aside designation has been specified, and the contract is open to qualified subcontractors capable of delivering fully compliant traceability documentation under stringent military requirements.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires full compliance with OSHA’s 29 CFR 1910.1200 Hazard Communication Standard for the identification, labeling, and documentation of hazardous materials, including the preparation of Safety Data Sheets and the application of MIL-STD-129 hazard labels for military shipments. The work involves ensuring all hazardous substances are properly classified, labeled, and accompanied by accurate documentation to meet federal regulatory and Department of Defense requirements. The performance location is specifically designated as Fort Bragg, North Carolina, with a response deadline of August 13, 2026, and the contract is structured as a subcontract under NAICS code 541620, which pertains to management consulting services related to environmental and safety compliance. The procuring entity is the Maritime Supply Chain ESOc Buys office under the Department of Defense, indicating this effort supports logistics and supply chain operations within the military ecosystem.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

MIL-STD-129 Labeling & BarcodingThis contract requires the application of MIL-STD-129 compliant shipping labels and barcodes to ensure accurate item identification, container tracking, and proper marking of component lead finishes in compliance with Department of Defense standards. The work involves precise labeling procedures for military logistics, ensuring that all items and containers are labeled according to federal specifications to support traceability, inventory management, and supply chain integrity throughout the distribution network. The contract is structured as a subcontract and is part of the Maritime Supply Chain ESOC Buys initiative under the Department of Defense. Performance of the required labeling and barcoding services is to be performed at Fort Bragg, North Carolina, with a submission deadline of August 13, 2026, and the solicitation posted on August 2, 2026. The North American Industry Classification System code 811219 applies, indicating the work falls under other personal services, and bidders must ensure full adherence to MIL-STD-129 requirements, including label content, format, barcode symbology, and finish marking accuracy to meet operational readiness and accountability standards.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services for solenoid components in strict compliance with MIL-STD-2073-1E and DLA RP001 standards. Services encompass dry cleaning, box packaging, palletization, and an Open Pack Inspection under the M-level requirement, ensuring the solenoids are protected against environmental degradation and maintained in optimal condition throughout storage and transit. All work must adhere to federal defense packaging protocols to guarantee readiness and longevity in military supply chains. Performances are designated for Fort Bragg, North Carolina, with a response deadline of August 13, 2026, and the solicitation was posted on August 2, 2026. This is a subcontract opportunity under NAICS code 493190, managed by the Department of Defense’s Maritime Supply Chain ESOC Buys division. The work demands precision in handling, documentation, and inspection to meet defense logistics expectations, with no set-aside classification specified and no point of contact provided in the solicitation details.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Electrical Solenoid Manufacturing & SupplyThe contract calls for the manufacture or supply of two electrical solenoids identified by NSN 5945-01-675-5203, with all units required to fully comply with the DLA Master List specifications. This includes adherence to stringent quality assurance protocols, comprehensive testing procedures, full traceability of materials and production processes, and the provision of certified documentation to verify conformance. The work must be executed to meet military-grade reliability and performance standards, ensuring operational readiness for defense applications. Subcontractors must respond by August 13, 2026, with the procurement managed under the NAICS code 335314 by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office. Performance is designated to occur at Fort Bragg, North Carolina, with a zip code of 28310-0000. While no set-aside designation is specified, the contract is structured as a subcontract under the broader DLA procurement framework, indicating the need for precise execution and compliance with federal defense supply chain requirements. Interested parties must access the solicitation through the provided DIBBS link to submit proposals or inquiries.

Relay and Industrial Control Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Strainer Elements (Sediment Type)The contract entails the procurement and delivery of sediment strainer elements with the National Stock Number 4730016585252 to meet all technical, packaging, labeling, and regulatory requirements mandated by the Defense Logistics Agency for shipment to a military production facility located in Albany, Georgia, with a zip code of 31704-0325. The item must be manufactured and packaged in full compliance with DLA standards to ensure operational readiness and proper handling within the defense supply chain. The solicitation is classified as a subcontract under NAICS code 332999, indicating it pertains to other fabricated metal product manufacturing, and the offeror must submit responses by the deadline of August 13, 2026, with the posting date of August 2, 2026. The contracting agency is the Maritime Supply Chain ESOC Buys branch within the Department of Defense, and all deliveries are to be directed to the designated military production plant without deviation from specified technical and logistical protocols.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires full compliance with hazardous materials handling standards as outlined in 29 CFR 1910.1200, focusing on proper labeling of tubing and packaging that may contain hazardous substances. This includes accurate, up-to-date Safety Data Sheet (SDS) management to ensure all relevant chemical information is accessible and correctly documented for personnel handling or transporting the materials. The scope is tied specifically to the physical goods involved, with emphasis on regulatory adherence to federal workplace safety standards. This is a subcontract solicitation issued by the Department of Defense under the MARITIME SUPPLY CHAIN ESOC BUYS, with a NAICS code of 541620 indicating it relates to scientific and technical consulting services. The response deadline is August 13, 2026, and performance is required in Milwaukee, Wisconsin, with a postal code of 53218-3343. The solicitation was posted on August 2, 2026, and bidders must ensure their compliance capabilities align with the regulatory requirements before submitting a proposal.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

ASTM D3951 and RP001 Compliant PalletizationThe contract requires the palletization and preparation of nonmetallic tubing for shipment in strict accordance with ASTM D3951 and DLA RP001 packaging standards, ensuring all materials are properly protected, labeled, and secured for transport under military procurement guidelines. The work must be performed to meet the rigorous requirements set by the Department of Defense for packaging, handling, and shipment of nonmetallic tubing, with compliance being mandatory for contract fulfillment. The place of performance is specified as Milwaukee, Wisconsin, with a ZIP code of 53218-3343, indicating the location where the activities must be carried out. This is a subcontract under the NAICS code 488310, which classifies it within the support activities for air transportation sector, though the nature of the work aligns with logistics and packaging services. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, allowing interested parties approximately eleven days to submit proposals. The contract is managed by the Maritime Supply Chain ESOC Buys division of the Department of Defense, and all submissions must be made through the DIBBS portal linked in the contract details. There is no set-aside classification specified, indicating the opportunity is open to all eligible contractors without preference given to small, veteran-owned, or other designated business categories.

Port and Harbor Operations

POSTED

about 8 hours ago

DEADLINE

MIL-STD-129 Packaging and Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services strictly compliant with MIL-STD-129 standards for shipments of nonmetallic tubing, with additional requirements for handling hazardous or radioactive materials if applicable. All packaging and labeling must meet military specifications to ensure proper identification, traceability, and safe transport through defense supply chains. The work is to be performed at the specified place of performance in Milwaukee, Wisconsin, with a zip code of 53218-3343, and is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys division. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 561910, which pertains to other support activities for transportation. While no set-aside type is specified, the procurement process will be managed through the DLA DIBBS platform, and bidders must ensure full adherence to military packaging and labeling protocols, including any special handling procedures required for sensitive or dangerous cargo. Failure to comply with MIL-STD-129 requirements will result in rejection of the proposal.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE