Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STARTER, MOTOR

Active
SPE7M4-26-T-296SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a starter motor identified by NSN 6110017187462 and part number S801V50N3S from Eaton Corporation, with a quantity of three units to be delivered FOB origin within 126 days, with no tolerance for variance in quantity. The item is designated as a critical application item, and strict compliance with DLA’s Master List of Technical and Quality Requirements is required, which overrides all other specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Delivery is to be made to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract enforces DLA’s authorized unit of issue and references official DLA guidance for unit conversion. All technical and quality standards referenced take precedence over general standards, and the requirement for government identification removal from non-accepted supplies is in effect. The solicitation number is SPE7M4-26-T-296S, with a response deadline of August 13, 2026, and the item falls under NAICS code 335312 for motor vehicle electrical and electronic equipment manufacturing.

General Info

Procure three critical starter motors NSN 6110017187462, FOB origin, 126-day delivery, DLA standards override all, packaging MIL-STD-129, Tracy, CA receipt.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-296S for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STARTER,MOTOR
STARTER<(>,<)> MOTOR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
EATON CORPORATION 81118 P/N S801V50N3S
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697979 0001 EA 3.000
NSN/MATERIAL:6110017187462
DELIVERY (IN DAYS):0126
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M4-26-T-296S
SECTION B
PR: 7017697979 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/18/2026 Original Required Delivery Date:12/18/2026
SPE7M4-26-T-296S NSN/Part Number: 6110-01-718-7462 Quantity: 3 EA Purchase Request: 7017697979QTY: 3 Delivery: 126 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-244M
The contract pertains to the procurement of three alternating current motors identified by NSN 6105-01-508-7921 under solicitation SPE7M1-26-T-244M, with a required delivery within 144 days of award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware unless specifically exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. The alternate offeror is required to submit a complete data package detailing both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with solicitation issued on August 2, 2026, and responses due by August 13, 2026. Performance is to occur in San Diego, California, and inquiries may be directed to Michael Reese at the provided contact information.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CURR
Solicitation # SPE7M1-26-T-244K
This contract is for the procurement of two alternating current motors with part number 5KS254NS271HA and NSN 6105-01-354-2819 under solicitation SPE7M1-26-T-244K, issued as a total small business set-aside. The motors must comply with DLA packaging and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific provisions for measuring and test equipment, removal of government identification from non-accepted supplies, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The item is classified as a critical application and is subject to strict prohibitions on the intentional introduction of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Delivery is required FOB origin in 382 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with unit packaging code U and marking per MIL-STD-129 without special codes. The shipment must be palletized according to DLA requirements and delivered to the specified warehouse in Tracy, California. The original required delivery date is October 14, 2026, with a need ship date of August 31, 2027. The contract includes transportation instructions per DLAD procedural notes C19 and C20, and the unit of issue is each.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M9-26-T-0034
This contract pertains to the procurement of seven alternating current motors, part number 801625-575-1, under NSN 6105-01-493-5532, issued by the Department of Defense through the Electrical Devices Division. The solicitation number is SPE7M9-26-T-0034, with a total small business set-aside, and it mandates strict adherence to DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned specific verification levels or AQLs. Mercury and mercury-containing compounds are prohibited unless functionally necessary in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents as defined by NAVSEA, with portable units requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Delivery is required FOB origin within 53 days of contract award, with a firm delivery date of October 6, 2026, and a required arrival date of January 15, 2027. Quantity must be exact with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, material codes, and unit container types, with marking per MIL-STD-129 and no special marking required. Palletization follows DLA packaging guidelines, and shipment must be routed to the DLA Distribution facility in New Cumberland, PA, as listed in both parcel post and freight shipping addresses. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the contract includes no bidset availability, requiring full compliance with technical and quality specs as referenced.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
MOTOR, UNIVERSAL
Solicitation # SPE7M1-26-T-245X
The contract is for the procurement of two universal motors under NSN 6105-01-558-5135, with a total quantity of two units and a unit price of $2.00, resulting in a total price of $4.00. Delivery is required within 66 days of contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. Strict packaging requirements mandate compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must also conform to RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional use in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, with a required ship date of December 16, 2025, and an original delivery date of December 24, 2025. The solicitation number is SPE7M1-26-T-245X, issued under NAICS code 335312, with point of contact Misty Slone at misty.slone@dla.mil. The contract references the DLA Master List for all technical and quality specifications, with applicable revisions determined by the solicitation or award date depending on procurement type.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
PANEL, POWER DISTRIB
Solicitation # SPE7M0-26-T-025T
This contract awards one unit of a power distribution panel with NSN 6110-01-673-8342 and part number MPD 44000-006 from MARWAY POWER SYSTEMS, INC, under solicitation SPE7M0-26-T-025T, which is a total small business set-aside. Delivery is required within five days of contract award to the USS GRIDLEY DDG 101 at FPO AP 96666, with FOB destination terms, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special markings and palletization aligned to DLA procurement guidelines. The supply is classified as a critical application item and is subject to strict prohibitions: mercury and mercury-containing compounds must not be intentionally added or come in direct contact with the hardware, except in approved exceptions such as batteries, fluorescent lights, sensors, or weapon systems specified by NAVSEA, and any portable devices containing mercury must have shock-proof design and secondary containment per NAVSEA 5100-003D. Additionally, Class I ozone-depleting chemicals are entirely banned, and any substitutes require prior approval unless explicitly authorized by the specifications. The contract specifies a single unit at a fixed price with zero tolerance for quantity variance, and the required delivery date is July 30, 2026. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The contracting office is the Department of Defense’s Maritime Supply Chain ESOc Buys, and the primary point of contact is Laurie Wassmuth.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
CONDITIONER, POWER L
Solicitation # SPE7M1-26-T-245T
The contract pertains to the procurement of six units of a CONDITIONER, POWER L with NSN 6110-01-721-3345 and part number 85-312-1, supplied by MEGGITT SAFETY SYSTEMS INC. The total price is $36.00 at $6.00 per unit, with delivery required FOB origin within 340 days from the contract award, no variance allowed in quantity. The item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection occurs at destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s packaging requirements, and all labeling must reflect the specified Unit of Issue and Quantity per Unit Pack. The contract incorporates mandatory technical and quality standards from the DLA Master List, which override any conflicting specifications. Cybersecurity compliance is required at CMMC Level 2 through self-assessment, and the item is subject to Covered Defense Information protocols. Transportation and shipping instructions follow DLAD procedural notes C19 and C20. The solicitation was issued under SPE7M1-26-T-245T, with a response deadline of August 13, 2026, and falls under NAICS code 335312 for electrical equipment manufacturing. The primary point of contact is Michael Reese of the Department of Defense, Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M4-26-T-296R
This contract specifies the procurement of two starter motors with part number S801V65N3S and NSN 6110017187461 under solicitation SPE7M4-26-T-296R, issued by the Department of Defense’s Fluid Handling Division. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede any conflicting specifications. The product is prohibited from containing Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specification. Delivery is required FOB origin within 291 days from the contract date with zero quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all specifications from the DLA Master List take precedence over packaging standards. The unit of issue is each, with a total quantity of two, and the total price is defined by the unit price listed in the CLIN. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the delivery must be received by June 1, 2027, with no flexibility on the required delivery date. All packaging and marking must reflect the correct Unit of Issue and Quantity per Unit Pack as specified, and the contractor is required to comply with DLA’s procedures for removing government identification from non-accepted supplies. The contract is issued under the DoD authorized unit of issue system, and reference must be made to the official DLA unit of issue spreadsheet to ensure compliance. Primary point of contact for inquiries is Rory O’Reilly, with solicitation responses due by August 13, 2026, and the procurement falls under NAICS code 335312 for electric motor and generator manufacturing.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
Supply of 10kW Service Kit (Electromechanical Power Equipment)The contract entails the manufacture or sourcing of two 10kW service kits designed for military generator systems, fully compliant with the National Stock Number NSN 2940016273977. These kits are critical components for maintaining operational readiness and are classified under the NAICS code 335312, indicating specialization in electromechanical power equipment manufacturing. The work is being procured under a subcontract arrangement by the Defense Logistics Agency on behalf of the Department of Defense, ensuring alignment with defense supply chain standards and military performance requirements. The contract was posted on August 1, 2026, and while the place of performance and point of contact details are not specified, the procurement is tied to a specific award record through the DLA’s DIBBS system, confirming its official status and traceability. The absence of a solicitation number and set-aside classification suggests this subcontract may have been awarded directly to a qualified supplier under existing master agreements or emergency procurement protocols, prioritizing rapid deployment and compliance with established military specifications.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335312
New
DIBBS
Supply of 5kW Generator Service Kit (NSN 2940016273978)The contract obligates the contractor to supply five 5kW generator service kits designated by NSN 2940016273978, complete with proper packaging, labeling, and expedited shipment to Fort Hood, Texas, using the fastest traceable运输 method available. All costs and risks associated with transportation, including potential loss, damage, or delay during transit, are fully assumed by the contractor. The procurement falls under NAICS code 335312 and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. Although specific details such as solicitation number, place of performance, and point of contact are not provided, the award is tied to the official DIBBS record with the referenced contract and delivery identification numbers. The posting date indicates the opportunity was published in August 2026, suggesting planned procurement activity for future delivery.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 335312
New
DIBBS
High-Reliability Electrical Resolver ManufacturingThe contract involves the manufacture and delivery of one high-reliability electrical resolver with NSN 5990-01-642-0113 and Part Number B-0720-015187-001, produced under strict military specifications and government engineering source approval. Production must adhere to certified quality standards to ensure compliance with Department of Defense requirements for mission-critical components. The item is intended for use within the maritime supply chain and will be delivered to a military service point with a FPO address and ZIP code 96694-2900. The solicitation is structured as a subcontract under NAICS code 335312, indicating classification within the electrical equipment manufacturing sector. The proposal deadline is set for August 5, 2026, with the opportunity posted on July 31, 2026, allowing vendors a five-day window to respond. All work must align with DLA’s procurement protocols and quality assurance mandates, ensuring the resolver meets exacting performance and durability standards for defense applications.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
DIBBS
RESOLVER, ELECTRICAL
Solicitation # SPE7M1-26-T-165Z
This contract is for the procurement of one electrical resolver, part number B-0720-015187-001, identified by NSN 5990-01-642-0113, supplied by IMECO INC under a restricted source requirement that mandates government engineering source approval. The item must comply with stringent DLA packaging and technical standards including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lights, sensors, and weapon systems, with any allowable mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Delivery is due within 20 days FOB origin to the destination point at USS TRIPOLI LHA 7, FPO AP 96694-2900, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. Shipping must be via the fastest traceable method, explicitly excluding parcel post, and must adhere to standardized palletization and container codes. The supplier is required to use the DLA VSM system for shipping coordination and must follow all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract, issued under solicitation SPE7M1-26-T-165Z, has a required delivery date of October 24, 2024, and is governed by Federal procurement regulations with the Department of Defense’s Maritime Supply Chain as the contracting authority.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
DIBBS
MOTOR-TACHOMETER GE
Solicitation # SPE4A5-26-T-307W
The contract seeks the delivery of one MOTOR-TACHOMETER GENERATOR with NSN 6105-00-068-7214 under solicitation SPE4A5-26-T-307W, with a required delivery within five days after order placement to San Diego, California. The item must conform to stringent military standards for packaging and marking, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling with mandatory linear and 2D Data Matrix barcodes. Physical identification of the bare item is required, and all packaging must adhere to DLA’s RP001 requirements, prohibiting parcel post in favor of traceable transportation methods. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. The contractor must comply with DLA’s Technical and Quality Requirements referenced through R and I numbers in the DLA Master List, with the applicable revision controlled by the solicitation issue or award date. The contract imposes robust cybersecurity and compliance obligations under CMMC Level 2 self-assessment and NIST SP 800-171 requirements, mandating safeguarding of covered defense information and reporting of cyber incidents per DFARS 252.204-7012. Hazardous materials must be labeled and documented with Safety Data Sheets compliant with 29 CFR 1910.1200 and submitted prior to award, and any ocean transport must use U.S.-flag vessels unless a prior waiver is granted with detailed documentation and bill of lading submission. The contractor is subject to payment levies for outstanding government debts and must immediately report any potential safety issues with the item. Invoicing must be conducted via WAWF, and compliance with FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, subcontracting, inspection at destination, and prohibitions on procurement from communist Chinese military companies is required. Offerors must provide UEI and CAGE codes, represent their small business status, and disclose joint venture partners if applicable, with deviations applying to multiple clauses under Deviation 2026-00038. All proposals must be submitted electronically via DIBBS by the
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 333613
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE7M4-26-T-296W
The contract is for the procurement of five hydraulic accumulators, part number 608712 and NSN 3040-00-957-3601, supplied by EATON AEROSPACE, LLC, with a total value of $25.00 at $5.00 per unit. The item is classified as a critical application item and must be delivered in strict compliance with DLA packaging requirements, specifically ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, with no variance allowed in quantity—exactly five units must be delivered. Delivery is FOB origin with inspection and acceptance occurring at the destination, and delivery is required within 158 days of the contract award, with an original required delivery date of May 28, 2027, and a need ship date of January 19, 2027. The items must be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, with transportation handled according to DLAD Proc Note C19 for main shipment and C20 for first destination. Government identification must be removed from non-accepted supplies, and the solicitation number is SPE7M4-26-T-296W, issued under NAICS code 333613 by the Department of Defense’s Fluid Handling Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, BEAD
Solicitation # SPE7M3-26-T-7805
This contract is for the procurement of one unit of a REDUCER, BEAD with NSN 4730-01-664-8190 under solicitation SPE7M3-26-T-7805, issued by the Department of Defense’s Fluid Handling Division. The item must be delivered within 348 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s specific packaging guidelines. The product must be free of mercury and mercury-containing compounds except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited, and any substitutions require prior approval. The unit of issue is each (EA), and the contractual price is set at $1.00 per unit. The required delivery date is July 28, 2027, with the original response deadline for the solicitation having passed on August 13, 2026. Technical and quality requirements referenced are governed by the DLA Master List version in effect at the time of solicitation issuance.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 4720-01-494-5683 and part number 7-554-202801, issued by the Department of Defense through the Fluid Handling Division. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due within 130 days to DLA Distribution Barstow, California, under FOB origin terms. The order carries a strict zero percent quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, containerization, and marking in accordance with MIL-STD-129, with no special marking required. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling. The contract is linked to solicitation SPE7M4-26-T-297T, which was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 332999. The primary point of contact is Blake Tushar, reachable via phone and email. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
SLEEVE, REINFORCING,
Solicitation # SPE7M4-26-T-297N
This contract specifies the procurement of a reinforcing sleeve for hose applications under military specification, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application requiring engineering source approval and is restricted to approved suppliers including Boeing, Eaton Aeroquip, Smiths Tubular Systems, and Parker Hannifin, all supplying the same part number BACH8A04EE0130B. Compliance with MIL-STD-130N for Item Unique Identification and DFARS 252.211-7003 is mandatory, alongside traceability documentation per DLA Procurement Note C03 (August 2016). The product must not contain any Class I ozone-depleting chemicals, and all packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels based on criticality. Delivery is FOB origin, with a strict quantity of eight units, no variance allowed, arriving at the DLA distribution facility in New Cumberland, PA within 25 days of order, with a required ship date of September 8, 2026. All data and documentation must remain under government control, and the item is subject to covered defense information protocols under RD002.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297A
The contract pertains to the procurement of four nonmetallic hose assemblies with part numbers F722J9J7121212-84 and F722TCJ9J1121212-84-000, supplied by Parker-Hannifin Corporation under NSN 4720-01-480-6648. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. Verification levels and AQLs are defined for critical, major, and minor attributes, with the manufacturer permitted to choose attribute or variable inspection under MIL-STD-1916 unless restricted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA standards, and palletization according to RP001 requirements. The DLA Master List takes precedence over ASTM D3951. Delivery is FOB origin with a 137-day lead time, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of four units and no variance permitted. The delivery address is DLA Distribution Albany in Albany, Georgia, with a required ship date of December 29, 2026. The solicitation, issued under SPE7M4-26-T-297A, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-297P
This contract specifies the procurement of a nonmetallic hose assembly with part number 591200-51 and NSN 4720016541086, quantity of three units, to be delivered FOB origin within 39 days of contract award, with a required delivery date of May 2, 2026 and a need ship date of September 22, 2026. The item is classified as a critical application item with no shelf life requirement and must comply with extensive technical and quality standards referenced through DLA master lists, including preservation, packaging, and marking requirements per MIL-STD-2073-1E and MIL-STD-129. All units must be marked with the NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number, with special marking codes not applicable. Packaging must adhere to DLA packaging requirements and palletization standards, with each unit contained in a D3 unit package within an E5 intermediate container. The contract mandates compliance with stringent traceability and identification protocols, including retention of supply chain documentation per DLA Procurement Note C03, Item Unique Identification (IUID) following MIL-STD-130 and DFARS 252.211-7003, and FAA bare item marking requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as dictated by applicable documents. Acceptance occurs at the destination, with no variance allowed in quantity. Shipping and delivery instructions direct all units to the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The solicitation, issued under contract number SPE7M4-26-T-297P, is for a federal acquisition under NAICS code 326220 with Blake Tushar as the point of contact.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7M4-26-T-297W
The contract pertains to the procurement of a BODY, VALVE with a matched set SEAL RING, identified by NSN 4820-00-404-6625, for a quantity of five units under purchase request 7017695673. Delivery is required within 165 days from award, and the solicitation number is SPE7M4-26-T-297W, issued by the Department of Defense’s Fluid Handling Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of either the solicitation issue date or award date depending on the scale of the acquisition. Subcontractors must comply with DLA packaging requirements and are required to remove government identification from non-accepted supplies. No bidset is available from DLA, and the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The prime contractor is Eaton Aerospace LLC dba Sterer Engineering, and the place of performance is New Cumberland, Pennsylvania, with Rory O’Reilly listed as the primary point of contact. The NAICS code is 336411, and the solicitation closes on August 13, 2026.
Aircraft Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
CABINET, KEY
Solicitation # SPE7M4-26-T-296X
The contract pertains to the procurement of a cabinet key under NSN 2090-00-904-6699, with a quantity of 63 units, to be delivered FOB origin within 123 days by December 15, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. The hinge must be provided with a fast-type pin, and piece number 22, the bulkhead clip, must be supplied in specified dimensions of 1 inch long by 3/4 inch wide by 1/8 inch thick, with part number HPC-511. The unit of issue is each (EA), with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the designated receiving warehouse in Tracy, California. Transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-296X, issued by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
Other Marine Fishing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-7794
The contract specifies the procurement of one plug and pipe assembly with NSN 4730-01-549-7774 under solicitation SPE7M3-26-T-7794, requiring delivery within 20 days FOB origin with no variance in quantity. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The shipment must be sent via traceable freight methods, explicitly prohibiting parcel post, and directed to the designated military delivery address at Moody AFB, Georgia. The unit of issue is each, priced at $1.00, with inspection and acceptance occurring at the destination. The supplier is identified as GENERAC MOBILE PRODUCTS, LLC, and the required delivery date is July 29, 2026, with solicitation responses due by August 13, 2026. Government use identifiers and codes are included for internal logistics and tracking purposes.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, WATER INLET FI
Solicitation # SPE7M3-26-T-7801
The contract pertains to the procurement of eight units of a water inlet fitting, identified by NSN 4730-00-928-6499, under solicitation SPE7M3-26-T-7801, with a response deadline of August 13, 2026. Delivery is required within 307 days of award. The item is subject to stringent export control regulations under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and mandating compliance with DFARS 252.225-7048. Only DLA contractors possessing valid US/Canada Joint Certification Program certification, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, are authorized to access this information. The contract is administered by the Department of Defense’s Fluid Handling Division, with performance designated for Tracy, California, 95304-5000. The primary point of contact is William Cain, reachable via email and phone provided. The solicitation is classified under NAICS code 332996 and requires compliance with DLA packaging standards and CMMC Level 2 certification for third-party assessors.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID
Solicitation # SPE7M4-26-T-297Y
The contract pertains to the procurement of 55 units of a GAGE ROD-CAP, LIQUID LEVEL with NSN 6680-01-299-3387 under solicitation SPE7M4-26-T-297Y, with a delivery requirement of 95 days after contract award. The item is designated as a source control item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which must be complied with in full. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in the sample lot unless otherwise directed in the contract. The item is classified under NAICS 334519 and is governed by cybersecurity requirements mandating CMMC Level 2 certification for the third-party assessment organization involved. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons anywhere, including U.S. subsidiaries and employees, and require compliance with DFARS 252.225-7048. Access to this data is limited to approved DLA contractors with JCP certification, completion of mandatory training on handling export-controlled technical data, and approval from the DLA controlling authority. Packaging must adhere to DLA packaging requirements, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and performance is to occur in Corpus Christi, Texas.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-297L
This contract specifies the procurement of a single metallic tube with NSN 4710-01-653-9621 and part number 5284449, supplied by Cummins Inc. or Birdon Pty Ltd, designated as a critical application item. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification language unless alternative chemicals are pre-approved. Delivery is required within 20 days to the DLA Distribution Jacksonville Material Processing Center at Mayport Naval Station, Florida, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped via the fastest traceable means, explicitly excluding parcel post. The contract is issued under solicitation SPE7M4-26-T-297L with a required delivery date of March 6, 2026, and is governed by DLA’s authorized unit of issue and procurement protocols. Government use identifiers are controlled, and removal of government markings from non-accepted supplies is mandatory. All logistics and handling instructions, including palletization and marking, are strictly defined to ensure compliance with DLA packaging and distribution standards.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details