Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

POWER SUPPLY

Active
SPE7L7-26-T-5032Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense for the DDSP New Cumberland Facility, is for the procurement of two power supply units under NSN 6130-01-548-3344. The contract is designated as a Total Small Business Set-Aside and requires delivery within 188 days after the order is placed. The agreement mandates strict adherence to DLA packaging requirements and the protection of covered defense information. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional components like batteries or sensors. Additionally, the successful offeror must provide a complete data package for both approved and alternate parts.

General Info

DoD small business set-aside for two power supply units delivered within 188 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

SPE7L7-26-T-5032.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
MOLLY TEEGARDEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
POWER SUPPLY
POWER SUPPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 6130-01-548-3344 Quantity: 2 EA Purchase Request: 7018067329QTY: 2 Delivery: 188 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5039
This contract is for the procurement of seven power supply units, identified by NSN 6130-01-735-7719 and part number A10-0498-001 from L3Harris Technologies, Inc. The agreement is managed by the DLA Distribution San Joaquin under solicitation number SPE7L7-26-T-5039. Delivery is required within 274 days, with a specified need date of June 12, 2027, and shipping is designated as FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 for marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Additionally, the supplier must comply with regulations regarding the removal of government identification from non-accepted supplies and the protection of covered defense information.
DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M0-26-T-065B
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of two thermal release heaters under NSN 5999-01-123-2725. The contract requires a rapid delivery turnaround of five days after receipt of order. The primary point of contact for this requirement is Gerard Quinn. Compliance with DLA packaging requirements and specific technical and quality standards is mandatory, as outlined in the DLA Master List. Key regulatory requirements include the physical identification of bare items and the removal of government identification from any non-accepted supplies. Additionally, alternate offerors must provide a complete data package for both approved and alternate parts to be considered.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5038
This contract is for the procurement of two power supply units, identified by NSN 6130-01-644-2625 and part numbers from Leidos, Inc. and XP Power LLC. The agreement specifies a delivery timeframe of 194 days after order, with a required delivery date of March 24, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the supplier must comply with CMMC Level 2 self-assessment and covered defense information requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases approved by NAVSEA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-702V
This contract is for the procurement of red-orange electrical insulation tape conforming to MIL-I-22444C, with specifications of 1 inch width and a thickness between 0.015 and 0.020 inches. The item is designated as a critical application item with a non-extendable shelf life of 12 months. The order consists of one roll to be delivered FOB Origin within 80 days after the order. The supplier must adhere to ISO 9001:2015 quality standards and follow specific DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A mandatory first article test is required, involving a 100 percent dimensional characteristics check on two items produced at the actual production facility. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
BATTERY, JUMP START
Solicitation # SPE7L7-26-T-5034
This contract is for the procurement of 12 jump start batteries, identified as commercial items with AGM chemistry and part number 746X705 from Pulsetech Products Corporation. The items are subject to a non-extendable shelf life of 24 months and require the submission of MSDS/PSDS documentation per FED-STD-313. The order is designated as a total small business set-aside under NAICS code 335999. Delivery is required within 136 days, with a need ship date of January 25, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, hazardous materials shipping standards, and MIL-STD-129 marking. Specific restrictions are placed on the use of mercury, and the items must be packaged and palletized according to RP001 and IP025 standards.
DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-702Z
This contract is for the procurement of electrical insulation tape, identified as a critical application commercial item under NSN 5970-01-012-4280. The requirement is for one roll, with each unit containing 36 yards, adhering to technical specifications A-A-59474D. The item has a 12-month extendable shelf life and must comply with specific DLA packaging, marking, and quality requirements, including the prohibition of mercury compounds in preservation and packaging. Delivery is required within 20 days, with the FOB, inspection, and acceptance points all set at the origin. Shipping must be handled via traceable means to the designated receiving office at Joint Base MDL in New Jersey. The contract specifies a zero percent quantity variance and mandates compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, BUSHING
Solicitation # SPE4A6-26-T-24XJ
This contract, identified as SPE4A6-26-T-24XJ, is a solicitation by the Department of Defense ASC Commodities Division for the procurement of bushing insulators, part number 5607-56, under NSN 5970013962084. The requirement consists of two line items, each for a quantity of 3 units, totaling 6 units. Delivery is required within 5 days after receipt of order, with shipping designated as FOB Origin and delivery to Tinker AFB in Oklahoma. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and requires palletization according to RP001. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The original required delivery dates are set for August 21 and August 24, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHARGE
Solicitation # SPE7L7-26-T-5035
This contract is for the procurement of 62 battery charger adapters, identified as National Stock Number 6130017069251 and part number BTA-70100-148 by Bren-Tronics Defense LLC. The item is classified as a Commercial Off The Shelf product. Delivery is required within 113 days, with a specified need date of January 2, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality and technical compliance are governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for the removal of government identification from non-accepted supplies and physical item marking. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformance required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
NUT, SLEEVE
Solicitation # SPE4A6-26-T-24VP
This contract is for the procurement of 63 sleeve nuts with retainer rings, identified as part number MS18029-21 and NSN 5310009075939. The item is classified as a commercial critical application item and must adhere to basic specification MS18029E. Delivery is required within 108 days, with a required delivery date of August 28, 2026, shipped FOB origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including SAE AS9100 standards for manufacturers. Quality assurance involves inspection and acceptance at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE4A6-26-T-24XK
This contract is for the procurement of one electrical solenoid, identified by NSN 5945-99-253-0797 and Honeywell Aerospace part number 2536W060, in accordance with AF drawing 8148650. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-24XK, with a required delivery date of August 7, 2026, and a delivery timeframe of five days after order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Quality assurance will be conducted via sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Shipment must be made via the fastest traceable means to Tinker AFB, Oklahoma, and the use of parcel post is prohibited.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-452T
This contract is for the procurement of one electrical solenoid, identified by NSN 5945015484855 and part number 121220A02 from Hoshizaki America Inc. The order is managed under solicitation SPE7M5-26-T-452T with a required delivery date of February 9, 2026, and a delivery timeframe of 20 days after order. Shipping is designated as FOB Destination to the USS Oregon SSN 793, and the contractor must use traceable shipping means rather than parcel post. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, including specific IPC/JEDEC J-STD-609 markings for component lead finish. Environmental restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances unless written approval is granted. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-24PH
This contract is for the procurement of Type I, Class 2 electrical insulation tape, identified by NSN 5970-00-139-5157. The required item features a width of 0.750 inches, a length of 1296.0 inches, and a 3.00 inch inner core. The order consists of one roll, defined as 108 feet, and is classified as a critical application commercial item with a 12 month extendable shelf life. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Delivery is set for 10 days after order, with FOB, inspection, and acceptance points all located at the origin. The shipment is destined for the Texas Army National Guard AASF 1 in Del Valle, Texas.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 336310
New
DIBBS
ROD, PILOT VALVE
Solicitation # SPE7MC-26-T-242Z
This contract is for the procurement of 26 units of a pilot valve rod, identified by NSN 4820-01-247-7780 and Leslie Controls part number N09976. The item is designated as a critical application item. Delivery is required within 103 days, with a required delivery date of September 18, 2029. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR CON
Solicitation # SPE8E8-26-T-5184
DLA Troop Support is seeking quotes for the procurement of 18 air conditioning filter elements, identified by NSN 4130014436958. This requirement is issued under solicitation SPE8E826T5184 and is designated as a total small business set-aside under NAICS code 333415. The items are to be delivered to DLA Distribution within 156 days after the order is placed. Interested and responsible sources must submit their quotes electronically by the deadline of August 28, 2026. All solicitation documents, including digitized drawings and military specifications, are available electronically via the provided link or the DIBBS portal. Inquiries regarding this procurement should be directed to the buyer listed in the solicitation document.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332919
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-241W
This contract is for the procurement of 53 safety relief valves, identified by NSN 4820016191363 and associated with Parker Hannifin Corporation part numbers 10500-21 and 20540 Rev B. The order is managed under solicitation SPE7MC-26-T-241W with a required delivery date of February 12, 2027, and a delivery lead time of 144 days. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
VALVE, PRESSURE EQUA
Solicitation # SPE7MC-26-T-242J
This contract, identified as SPE7MC-26-T-242J, is for the procurement of 91 units of a gaseous product pressure equalizing valve, identified by NSN 4820015924416. The equipment is associated with part numbers 03076410075 from The Champion Company and 25KP148 from Oshkosh Defense LLC. The delivery is set for 74 days after order, with a need ship date of May 7, 2024, and shipping is designated as FOB Origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract specifies that inspection and acceptance will occur at the destination.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
ACTUATOR, ELECTROMECHAN
Solicitation # SPE7MC-26-T-240X
This contract is for the procurement of 10 electromechanical rotary actuators, identified by NSN 4810013990945 and associated with Morpac Industries part numbers 20008 and 20008-2. The acquisition is managed by the Department of Defense through the DDSP New Cumberland Facility, with a delivery requirement of 144 days after order. The items are designated as reparable and must be shipped in reusable containers to the specified facility in New Cumberland, Pennsylvania. Compliance with DLA packaging requirements and MIL-STD-129 marking standards is mandatory. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements approved by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the delivery terms are set as FOB Origin with inspection and acceptance occurring at the destination.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7MC-26-T-241Z
This contract is for the procurement of six linear directional control valves, specifically identified as Clark Equipment Co part number 44007540 and NSN 4820011924616. The items are intended for use in an E/I compressor unit. The order is designated as a total small business set-aside under NAICS code 332912, with a required delivery date of January 16, 2027, and a delivery window of 127 days. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract also mandates the removal of government identification from any non-accepted supplies and requires adherence to the DLA Master List of Technical and Quality Requirements.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7MC-26-T-241H
This solicitation, identified as SPE7MC-26-T-241H, is issued by the Department of Defense for the procurement of 568 gate valves under NSN 4820-01-550-2881. The contract requires delivery within 144 days after receipt of order and is managed by the DDSP New Cumberland Facility. Compliance with DLA packaging requirements and specific technical and quality standards is mandatory, and any non-accepted supplies must have government identification removed. The procurement is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training. The response deadline for this solicitation is September 10, 2026.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-241N
This solicitation, issued by the Department of Defense for the DDSP New Cumberland Facility, is for the procurement of 36 check valves under part number 4820-01-106-0201. The contract requires delivery within 116 days after the order is placed and is subject to full and open competition. The agreement includes stringent compliance mandates, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and quality requirements. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive data. Inspection and acceptance will occur at the origin, and certificate of conformance procedures are authorized.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-243S
This solicitation, identified as SPE7MC-26-T-243S, is for the procurement of 30 check valves under NSN 4820-00-482-8907 for the Department of Defense. The contract requires delivery within 284 days after receipt of order and is managed by the DDSP New Cumberland Facility. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the item involves technical data subject to ITAR or EAR regulations, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the necessary data.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
SLEEVE AND SLIDE, DI
Solicitation # SPE7MC-26-T-242R
This contract is for the procurement of two directional control linear sleeve and slide valves, identified by NSN 4820014211690. The order is issued by the Department of Defense for delivery to the DLA Distribution New Cumberland facility. Key technical requirements include compliance with MIL-STD-130 for Item Unique Identification and adherence to DLA packaging and marking standards. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as defined by NAVSEA. The solicitation is a total small business set-aside under NAICS code 332911. Delivery is required within 158 days, with a need ship date of February 16, 2027, and an original required delivery date of June 14, 2028. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The contract references specific part numbers from Sargent Aerospace and Defense and mandates compliance with the DLA Master List of Technical and Quality Requirements.
Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
VALVE, CONTROL
Solicitation # SPE7MC-26-T-243W
This contract is for the procurement of three control valves, identified by NSN 4820012879718 and part number 1V5101 from Karl Senner, L.L.C. The item is classified as a commercial off the shelf critical application item. The solicitation is a total small business set-aside under NAICS code 336310, with a required delivery date of November 22, 2026, and a delivery window of 72 days. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination. The goods must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to the DLA Master List of Technical and Quality Requirements and specific packaging requirements outlined in RP001.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details