Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

POWER SUPPLY, UNINTE

Active
SPE7L7-26-T-4714Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L7-26-T-4714 is a Request for Quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of eight uninterruptible power supplies, specifically part number SMT2200RM2U from Schneider Electric IT Corporation. The items are classified as Shelf Life Type I with a non-extendable 12-month shelf life. Delivery is required within 20 days after receipt of order, with the destination and acceptance point located at Fort Bragg, North Carolina. The contract specifies that shipping must be conducted via traceable means and prohibits the use of parcel post. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Sampling and inspection will follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Key regulatory requirements include CMMC Level 2 self-assessment, adherence to the Hazard Communication Standard for labeling, and prohibitions on the intentional addition of mercury. Administrative processing, including payment requests and receiving reports, must be managed through the Wide Area Workflow system. Quotations must be submitted via the DLA Internet Bid Board System by August 24, 2026.

General Info

Procure eight Schneider Electric UPS units for delivery to Fort Bragg within 20 days.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

BLDG Y5015 MMD BOULEVARD, FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7L7-26-T-4714 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
POWER SUPPLY,UNINTE
POWER SUPPLY, UNINTERRUPTABLE SHELF LIFE TYPE I, 12 MONTHS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SCHNEIDER ELECTRIC IT CORPORATION 0MG77 P/N SMT2200RM2U SCHNEIDER ELECTRIC IT CORPORATION 0MG77 P/N SMT2200RM2UC
SPE7L7-26-T-4714
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017744588 0001 EA 8.000
NSN/MATERIAL:6130015942899
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91VVR
0097 CA BN CO D CIVIL AFFA
BLDG Y5015 MMD BOULEVARD
FORT BRAGG NC 28310
US
MARKFOR
W91VVR
SPE7L7-26-T-4714
SECTION B
PR: 7017744588 PRLI: 0001 CONT’D
0097 CA BN CO D CIVIL AFFA
BLDG Y5015 MMD BOULEVARD
FORT BRAGG NC 28310
US
M/F: (TCN) W91VVR62100001
RDD: 210
PROJ: TP 3
SUPP ADD: W81YT4 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A3A DIST: ADV: FC: AW
Need Ship Date:00/00/0000 Original Required Delivery Date:08/03/2026
SPE7L7-26-T-4714 NSN/Part Number: 6130-01-594-2899 Quantity: 8 EA Purchase Request: 7017744588QTY: 8 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Special Purpose Electrical Cable Assembly Manufacturing
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, STANDOFF
Solicitation # SPE4A5-26-T-347F
This contract is for the procurement of one standoff insulator, identified by NSN 5970-01-498-4236 and part number 477301-001 from Simmonds Precision Products Inc. This is designated as a critical application item with a required delivery date of June 18, 2026, and a delivery window of five days after receipt of order. The item is to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically Hill AFB in Utah. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. While the item does not have a shelf life requirement, it must comply with source approval request documentation and specific DLA packaging requirements for procurement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LAMP, LIGHT EMITTING
Solicitation # SPE4A6-26-T-15TM
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of light emitting lamps. The items are identified as commercial off the shelf products, specifically Grote Industries Inc part number 49332-3 under NSN 6220017311640. The requirement consists of two separate line items, each for a quantity of one unit, with delivery expected within 20 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, with a specific requirement for fragile marking. Shipments are to be delivered FOB Origin to two distinct locations: the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia, and the Amphibious Construction Battalion 1 in San Diego, California. The required delivery dates for these items are set for August 2026.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
BOX CONNECTOR, ELECT
Solicitation # SPE4A7-26-T-645G
This contract is for the procurement of 100 electrical box connectors, identified by NSN 5975014650815 and ABB Installation Products Inc. part number 3301. The order is designated under solicitation SPE4A7-26-T-645G with a required delivery date of August 6, 2026, and a delivery timeframe of 20 days after order. The shipment is destined for the USS MILIUS DDG 69, with both the inspection and acceptance points set at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE7M0-26-T-039Y
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one unit of electrical insulation sleeving under National Stock Number 5970-01-515-2510. The contract requires a rapid delivery turnaround of five days after receipt of order, with performance taking place in Portsmouth, New Hampshire. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 certification for third-party assessment and specific DLA packaging and marking requirements. Furthermore, the contract is subject to rigorous export controls under ITAR and EAR regulations, restricting the disclosure of technical data to approved entities with US/Canada Joint Certification Program certification and completed Department of Defense export training.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-15UF
This contract, solicitation number SPE4A6-26-T-15UF, is for the procurement of 60 rolls of electrical insulation tape under NSN 5970-01-013-9369. Each roll is defined as 66 feet in length. The item is designated as a critical application item with a non-extendable shelf life of 18 months. Approved sources include Plymouth Rubber Europa, 3M Company, and Stag Enterprise. Delivery is required within 5 days ADO, with the FOB, inspection, and acceptance points all set at the destination. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via sampling methods consistent with MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance unless otherwise specified.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-15TP
This contract is for the procurement of 29 rolls of electrical insulation tape, identified by NSN 5970004327371 and TE Connectivity part number 275447-1. Each unit of issue is defined as a 10 foot roll. The delivery is required within 5 days of order, with a required delivery date of August 14, 2026. Shipping is FOB Origin, and the items are to be delivered to the Naval Stores Depot in Karachi, Pakistan, via Eagle Van Lines. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods based on MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. While hazardous materials packaging standards apply via IP025, item unique identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M0-26-T-040M
This contract is for the procurement of 10 rolls of electrical insulation tape, identified by NSN 5970008778591. Each roll must be 0.750 inches wide, 0.010 inches thick, and 108 feet in length. The product must adhere to specification MIL-I-19166C and is subject to Qualified Products List or Qualified Manufacturers List requirements. The item is designated as a critical application item with a non-extendable shelf life of 12 months. Delivery is required within 5 days, with FOB, inspection, and acceptance all occurring at the point of origin. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, specifically noting the prohibition of intentionally added mercury compounds. The solicitation is issued by the Department of Defense Maritime Supply Chain ESOC Buys under solicitation number SPE7M0-26-T-040M.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
LAMP, LIGHT EMITTING
Solicitation # SPE4A6-26-T-15TT
This contract is for the procurement of one light emitting lamp, identified as a commercial off the shelf item with NSN 6220017057673 and part number ALEDI1RBKBK from manufacturer Livorsi Marine Inc. The item is designated as a critical application item and must be configured with firmware S-8 and a rudder 0-5 volt sender. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Delivery is required within 20 days and is set as FOB Origin, with inspection and acceptance occurring at the destination. The item must be shipped to the Underwater Construction Team 2 in Port Hueneme, California, using the fastest traceable means. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, including a fragile marking. The required delivery date is August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LAMP UNIT, VEHICULAR
Solicitation # SPE4A6-26-T-15TV
This contract is for the procurement of a vehicular lamp unit, identified as a commercial off the shelf item with NSN 6220017311629 and Grote Industries part number 60081. The solicitation includes two separate line items, each for a quantity of one unit. Delivery is required within 20 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The items are to be delivered to two different locations: the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia, and the Amphibious Construction Battalion 1 in San Diego, California. Strict adherence to DLA packaging and palletization requirements is mandatory, including compliance with MIL-STD-2073-1E and MIL-STD-129 for marking. The shipments must be sent via the fastest traceable means and must be marked as fragile.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT UNIT, EMERGENCY
Solicitation # SPE4A6-26-T-15UR
This contract is for the procurement of two emergency light units, identified as commercial off the shelf items with NSN 6220016701661 and part number 10-0067-9 from Grimes Aerospace Company. The items are designated as critical application components and must meet FAA airworthiness approval and higher level quality requirements specified in procurement note L32. Surplus items are not acceptable for this requirement. The contractor must adhere to strict supply chain traceability documentation and sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and DLA requirements, with delivery set as FOB Origin and inspection and acceptance occurring at the destination. The items are to be shipped to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a required delivery date of September 1, 2026.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CABLE, Y MOLDED
Solicitation # SPE7M1-26-T-275N
This contract is a solicitation for the procurement of three Y molded cables, identified by NSN 6110016422377 and part number LEX-2FER from Lex Products, LLC. The order is managed by the Department of Defense under solicitation number SPE7M1-26-T-275N, with a required delivery date of August 10, 2026, and a delivery window of 20 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination in Cherry Point, North Carolina. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, specifically noting that the item is considered protected cargo, requiring the omission of nomenclature from shipping containers. Compliance with Cybersecurity Maturity Model Certification Level 2 and the handling of covered defense information are required. All shipments must be sent via traceable means, explicitly prohibiting the use of parcel post.
MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECT
Solicitation # SPE7MC-26-T-190U
This contract is for the procurement of one linear direct valve, identified as a commercial off the shelf item from Ridewell Corporation with part number 17-PRT-AY092 and NSN 4810017312320. The agreement stipulates a delivery timeframe of 20 days with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the Amphibious Construction Battalion 1 in San Diego, California, by the required delivery date of August 10, 2026. Strict compliance is required regarding the prohibition of Class I ozone depleting chemicals, and any substitutes must be submitted for approval. The contractor must adhere to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Additionally, the contract incorporates specific technical and quality requirements from the DLA master list, including the removal of government identification from non-accepted supplies.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5152
This contract, identified as SPE8E8-26-T-5152, is a solicitation by the Defense Logistics Agency for the procurement of one electrostatic air filter, part number 940-38218-3, manufactured by L3Harris Maritime Power and Energy. The item is identified by NSN 4460-01-690-3017 and is associated with purchase request 7014818933. Delivery is required within 20 days, with a final required delivery date of December 10, 2025. The shipment is destined for the USS San Antonio LPD 17. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, and requires packaging in accordance with ASTM D3951. Technical and quality standards are governed by the DLA Master List, including requirements for the removal of government identification from non-accepted supplies and the handling of covered defense information. Inspection and acceptance will take place at the destination.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327215
New
DIBBS
TUBING, GLASS
Solicitation # SPE8E5-26-T-3968
This contract, identified as SPE8E5-26-T-3968, is a solicitation by the Defense Logistics Agency for the procurement of one unit of glass tubing, specifically Tyco Valves and Controls part number 18152-220 and NSN 9340014983630. The item is designated as a critical application item and must be delivered FOB destination to the USS Ronald Reagan CVN 76. The required delivery date is August 10, 2026, with a delivery window of 20 days after receipt of order. Compliance with several technical and quality standards is mandatory, including MIL-STD-130N for identification marking and MIL-STD-129 for labeling. Packaging must adhere to ASTM D3951 and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Shipping must be conducted via the fastest traceable means, specifically avoiding parcel post for freight shipments.
Glass Product Manufacturing Made of Purchased Glass

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, EXPANSION
Solicitation # SPE7MC-26-T-190V
This contract is for the procurement of one angle style expansion valve designed for R-12 refrigerant, featuring a 1/2 ton capacity and 60 capillary external equalizer with 1/2 SAE by 5/8 SAE external threaded end connections. The item is identified by NSN 4820000630410 and corresponds to part numbers from Emerson Electric Co Alco Controls and Carrier Corp. Delivery is required within 20 days, with the final destination being the USNS Guadalupe. The supplier must adhere to strict DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Additionally, the government notes that casting or forging may be required for manufacture, and contractors are directed to the DLA Casting and Forging Assistance Request process if tooling or material information is needed.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CONDENSER, REFRIGERA
Solicitation # SPE8E8-26-T-5148
This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one refrigeration condenser, specifically Copeland LP 5M9B9 part number 066-0292-02, identified by NSN 4130-01-657-2687. The delivery is required within 20 days after receipt of the order, with a final required delivery date of August 10, 2026. The item is to be delivered FOB Origin and will be inspected and accepted at the destination. The shipment is destined for the USS Gunston Hall LSD 44 and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. Compliance with several technical and quality standards is mandatory, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA packaging requirements under RP001. Additionally, the contract incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
DIBBS
MOLD RELEASE AGENT
Solicitation # SPE8ES-26-T-2565
This contract is for the procurement of two 5-gallon cans of mold release agent, identified by NSN 8030-01-233-1265 and part number RELEA SYS 8220 from Miller-Stephenson Chemical Co Inc. The item is classified as a Type I product with a non-extendable shelf life of 12 months and must be stored at temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within 20 days, with shipping and acceptance occurring at the origin, destined for the ROKAF LC Consolidated Supply Depot in South Korea. The supplier must adhere to strict hazardous materials regulations, including the submission of Safety Data Sheets and HCS labels in accordance with 29 C.F.R. 1910.1200 prior to the award. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additionally, the contract incorporates specific technical and quality requirements, including the removal of government identification from non-accepted supplies and the protection of covered defense information.
All Other Industrial Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-190R
This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one check valve, identified by NSN 4820011420251 and part number PE-2567 from Crane Pumps and Systems. The item is designated as a critical application item and must be delivered FOB Origin within 20 days. The required delivery date is set for August 10, 2026, with the final destination being Prince Sultan Air Base in Saudi Arabia. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and there is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Inspection and acceptance will take place at the destination.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-T-4717
This contract is a solicitation from the Defense Logistics Agency for the procurement of two storage batteries, specifically part number GW 1211-01 manufactured by Gentex Corp under NSN 6140-01-553-5175. The items are identified as critical application items and are sealed lead acid 12V batteries. They must adhere to a non-extendable 18-month shelf life and require the submission of MSDS/PSDS documentation. The agreement mandates strict compliance with DLA packaging, marking, and shipping requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots. Delivery is required within 20 days after receipt of the order, with inspection and acceptance occurring at the point of origin.
Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
LABEL
Solicitation # SPE8E6-26-T-4223
This solicitation, issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-4223, is for the procurement of one unit of part number 7690-01-625-3756. The contract requires delivery within 20 days after receipt of the order and falls under NAICS code 488190. The place of performance is designated as FPO 09591-0100, with Kathleen Selover serving as the primary point of contact. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Other Support Activities for Air Transportation

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATIN
Solicitation # SPE8ES-26-T-2570
This contract is for the procurement of a blue polyurethane coating, specifically a two-component touchup pen (SemPen) for aircraft applications. The product must adhere to MIL-PRF-85285 specifications, featuring a high-solids formulation with a maximum VOC of 420 grams per liter and a color matching FED-STD-595 number 15050. The order consists of one box containing 24 units, and the manufacturer must be QPL approved at the time of award. The item is a Type II shelf-life product with a six-month duration, requiring at least 85 percent of its shelf life to remain upon receipt. Suppliers must comply with strict hazardous material guidelines, including the submission of Safety Data Sheets and HCS labels per OSHA and 29 C.F.R. 1910.1200 standards. Delivery is set for FOB destination at JB Andrews, Maryland, with packaging and marking requirements following MIL-STD-129 and MIL-STD-2073-1E.
Paint and Coating Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2567
This contract is for the procurement of a gray solid paste adhesive, specifically identified as NSN 8040-01-685-5306, with a quantity of two tubes. The item is associated with Momentive Performance Materials Inc and RS Hughes Co Inc. It has a non-extendable shelf life of 12 months and must be stored between 60 and 80 degrees Fahrenheit. Delivery is required within five days to the USS Patrick Gallagher at Bath Iron Works in West Bath, Maine, via the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Because the material is hazardous, the supplier must provide Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E prior to the award. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Adhesive Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-190T
This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one safety relief valve, identified by NSN 4820012428125 and part number D559T1-8M-4 from Circor Aerospace, Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 10, 2026. The item is to be delivered FOB destination to the USS WASP LHD 1. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except for specified functional components. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details