Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Power Supply Unit Repair and Modification (NSN 6130-01-605-0017)

Active

Federal

Response Deadline11/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the technical restoration and modification of a specialized Power Supply Unit (NSN 6130-01-605-0017) for prime contractors supporting Department of the Navy projects. The scope of work includes the complete disassembly of the unit, diagnostic testing, board-level soldering, and the replacement of faulty resistors and capacitors. All work must be performed using electronic diagnostic equipment and ESD-safe workstations to ensure the delivery of one fully repaired and tested unit. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the project falls under NAICS code 811210. Prospective providers must maintain CMMC compliance and provide Buy American Act certification. The response deadline for this opportunity is November 23, 2026.

General Info

Technical restoration of one Navy Power Supply Unit due by November 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QUA29.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

POWER SUPPLY, UNINT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:30:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical restoration of a specialized power supply unit for prime contractors on Department of the Navy projects. Disassembles unit, performs diagnostic testing, replaces faulty capacitors and resistors, and performs board-level soldering and modifications. Utilizes ESD-safe workstations and electronic diagnostic equipment. Requires CMMC compliance and Buy American Act certification. Delivers one fully repaired and tested Power Supply Unit.

Similar Contracts

Same NAICS industry code

Fluid Valve Stem Repair and OverhaulThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the teardown, evaluation, and repair of Fluid Valve Stems (NSN 7HH 4820-01-317-3612) for prime contractors on Department of the Navy projects. The scope of work requires the execution of overhauls in strict accordance with technical manuals and directives, utilizing precision machining and electrostatic discharge protection protocols to ensure the delivery of functional, repaired stems with DLR labeling. Compliance is mandatory regarding physical marking standards per MIL-STD-130 and the application of unique item identifiers as specified in DFARS 252.211-7003. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Industrial Fluid Cooler Repair and OverhaulThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the comprehensive repair and overhaul of an industrial fluid cooler with NIIN 016593173. The scope of work includes the complete teardown, technical evaluation, and restoration of the unit through leak testing, tube cleaning, and fin repair to ensure compliance with government or OEM specifications. The contractor is responsible for delivering a fully functional unit along with all necessary MSDS documentation. Operational requirements include strict adherence to OSHA and FED STD 313 guidelines for the management of hazardous materials. Additionally, the contractor must provide UID reporting for any assets valued over 5,000 dollars. This project falls under NAICS code 811210 and is intended for prime contractors supporting DLA and Navy projects.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

EDG Run-in, Break-in, and Operational RetestThis subcontract for the Department of Defense, specifically the NSWC Philadelphia Division, involves providing technical testing and cylinder balancing for prime contractors on Navy NSWCPD projects. The primary objective is to return Emergency Diesel Generators to original equipment manufacturer specifications through the execution of engine run-in and break-in procedures. The contractor is responsible for monitoring performance using specialized engine analyzer equipment and adjusting cylinders to ensure balance in accordance with reference 2.3 and PMS MRC 7EER. The successful contractor must deliver balanced engine cylinders and a comprehensive operational retest report. This opportunity falls under NAICS code 811210 and was posted on October 26, 2026, with a response deadline of November 9, 2026.

Nswc Philadelphia Division

POSTED

about 5 hours ago

DEADLINE

Electro-Mechanical Valve Overhaul and Repair ServicesThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the overhaul, upgrade, and repair of Electro-Mechanical Housing Valves, specifically part number 1007720-2. The selected provider will be responsible for evaluating, disassembling, and repairing components in strict accordance with Hamilton Sundstrand Corporation drawings, utilizing specialized jigs, fixtures, and tooling to deliver certified ready-for-issue units. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification and adhere to ANSI/NCSL Z540.3 calibration standards. This project falls under NAICS code 811210 and requires the delivery of fully repaired and certified valve units to support prime contractors on critical weapon systems projects.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

Indicator-Transmitt Repair and Overhaul ServicesThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the repair and overhaul of the Indicator-Transmitt (NSN 6320-00-149-7570) for U.S. Navy component projects. The scope of work includes the teardown, evaluation, repair, and modification of units to ensure they are delivered as certified, operational components. All activities must be executed in accordance with TDP Version 014, specific technical orders, and approved repair standards. The contractor is required to utilize specialized testing equipment and maintain strict compliance with OPNAVINST 5510.1. Additionally, the application of Unique Item Identifiers is mandatory per DFARS 252.211-7003. This opportunity falls under NAICS code 811210, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Positive Clutch Teardown and Repair ServicesThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support Mech, involves the teardown, evaluation, and repair of Positive Clutch assemblies (NSN 7HH 3010-01-266-6858) for Navy prime contractors. The scope of work includes disassembling the clutch, assessing internal components for wear, and performing modifications to ensure all units align with original manufacturer specifications and TDP Version O04. The service provider must utilize precision measuring tools and disassembly jigs while maintaining strict compliance with DoD Item Unique Identification requirements. The final deliverable is a fully repaired, tested, and certified clutch assembly. This opportunity falls under NAICS code 811210, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Preventative Maintenance and FullCare Service Support for Cytiva Sepax C-PRO Cell Separation Systems

Solicitation # 27-000245

National Institutes Of Health Olao

POSTED

about 5 hours ago

DEADLINE

Preventative Maintenance and Service Support for Miltenyi Biotec CliniMACS Plus Instruments

Solicitation # 27-000190

National Institutes Of Health Olao

POSTED

about 5 hours ago

DEADLINE

Service maintenance on (3) three Dornier Genesis Imaging Systems at the Naval Medical Center San Diego

Solicitation # HT941027N0007

Defense Health Agency Hcd West

POSTED

about 5 hours ago

DEADLINE

Preventative Maintenance and Service Support for Thermo Fisher Scientific HERA VIOS 160i CO2 and VIOS 250i CO2 Incubators

Solicitation # 27-000282

National Institutes Of Health Olao

POSTED

about 5 hours ago

DEADLINE

J065--FY27 SERVICES (BASE+4) - Canon CT Service Contract

Solicitation # 36C24227Q0076

Solicitation 36C24227Q0076 is a firm fixed price request for quote issued by the Department of Veterans Affairs for a service contract to provide annual preventative maintenance for two Canon/Toshiba Aquilion Prime 160 CT machines at the Buffalo VA Medical Center. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 811210. The contract structure consists of a base period from November 1, 2026, to October 31, 2027, with four additional option years. The government will award the contract to the responsible offeror whose quote is most advantageous based on a comparative evaluation of technical capabilities, past performance, and total price for the base and option periods. Awardees must maintain commercial general liability insurance and adhere to strict regulations regarding the privacy and security of patient information and Controlled Unclassified Information. Key deliverables include the performance of maintenance and the submission of electronic field service reports within five days of any repair. Responses must be submitted via email to the designated contract specialist by the specified deadline, including the offeror's Unique Entity Identifier and a statement of agreement with all solicitation terms.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 5 hours ago

DEADLINE

in about 23 hours

Steris Instrument Management Services - Surgical Instrument Repair Management Program

Solicitation # 2140232

The State University of New York Upstate Medical University has entered into a five year agreement with Steris Instrument Management Services for a Surgical Instrument Repair Management Program. This contract was awarded as a sole source procurement, having received an exemption from the New York State Contract Reporter publication requirement in accordance with the Economic Development Law. The services will be performed at the SUNY Upstate Medical University facility located at 750 East Adams Street in Syracuse, New York. The scope of work involves comprehensive on-site sterilization and repair services for surgical instruments, including inspection, ultrasonic cleaning, and lubrication. Specific repair activities include alignment, adjustments, sharpening, laparoscopic shaft insulation, and the replacement of pins, inserts, springs, and other manufactured parts or screws. Additionally, these services are designed to integrate with the existing SPM platform. Marguerite Dodd serves as the Contract Administrator for this engagement.

State University of New York (SUNY)

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Specialized Electronic Component SupplyThis subcontract, titled Specialized Electronic Component Supply, involves the procurement of high-reliability electronic components, including capacitors, resistors, and integrated circuits, to support Department of the Navy repair projects. The selected provider must source and deliver mil-spec parts that adhere to DODISS specifications and provide certifications of conformance to mitigate the risk of counterfeit components. To ensure quality and safety, the contractor is required to maintain ISO 9001 or AS9100 quality management certifications and utilize anti-static packaging for all deliveries. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for November 9, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Circuit Card Assembly (CCA) Repair ServicesThis subcontract for Circuit Card Assembly Repair Services involves the teardown, evaluation, and repair of specific circuit card assemblies for prime contractors supporting Department of the Navy projects. The scope of work includes disassembling assemblies to identify failed circuitry, performing board-level repairs and component replacements, and conducting functional testing in accordance with DODISS standards. To ensure quality and compliance, the contractor must utilize precision diagnostic equipment and ESD-safe soldering stations to deliver fully repaired and functionally tested assemblies. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, this opportunity falls under NAICS code 811212. The solicitation was posted on October 26, 2026, with a response deadline of November 9, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Fluid Valve Component SupplyThis subcontract, titled Fluid Valve Component Supply, involves the procurement of high-precision replacement seals, gaskets, and sub-components for Fluid Valve Stems under NSN 4820-01-317-3612. Managed by the Navsup Weapon Systems Support Mech within the Department of Defense, the contract supports prime contractors working on Department of the Navy projects. All supplied materials must meet original equipment manufacturer or government specifications and be delivered directly to the designated repair facility. Compliance is a critical requirement of this agreement, as the provider must furnish certification of origin in accordance with the Trade Agreements Act and the Buy American-Balance of Payments Program. The opportunity is categorized under NAICS code 332991, with a response deadline set for November 23, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Certified Materials for CB Safety DeviceThis subcontract involves the supply of certified raw materials, including metals, plastics, and electrical components, for the CB Safety Device under the Navsup Weapon Systems Support Mech. All provided materials must strictly adhere to TDP Version 011 properties and be guaranteed free of mercury and hexavalent chromium. The supplier is responsible for delivering these materials to the manufacturer along with necessary certifications of conformance and material test reports. Managed by the Department of Defense under NAICS code 332710, the opportunity was posted on October 26, 2026, with a response deadline of November 23, 2026. The primary objective is to ensure that prime contractors receive high-quality, compliant raw materials that meet rigorous military specifications for weapon systems support.

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling for Naval Repair PartsThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing specialized packaging, marking, and labeling services for prime contractors. The scope of work requires strict adherence to military standards, including MIL-STD-2073 and MIL-STD-129 for packaging, and MIL-STD-767 or MIL-STD-2041 for cleanliness controls. A key technical requirement is the use of heat-sealed MIL-DTL-24466 green poly bags and the application of Depot Level Repairable labeling to ensure units are shipment-ready. The opportunity is categorized under NAICS code 561910 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 23, 2026. The final deliverable for this contract is the provision of finished, packaged, and labeled units that meet all specified naval repair parts requirements.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Precision Manufacture of CB Safety Device Gen 2This subcontract involves the precision manufacture of CB Safety Device Gen 2 for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes the fabrication and assembly of devices in strict accordance with TDP Version 011 and IRPOD specifications. As part of the quality assurance process, the contractor must perform First Article Testing on five units designated for government destructive testing and provide the resulting FAT reports upon delivery. Strict material constraints are in place, requiring all components to be free of mercury and hexavalent chromium. Additionally, the contractor must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC and NIST SP 800-171 regulations. The project is categorized under NAICS code 335313, with a response deadline set for November 23, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

Battery Power Supply Repair and Modification ServicesThis subcontract involves providing specialized repair and modification services for Battery Power Supplies supporting NAVSUP Weapon Systems Support projects. The scope of work includes the complete teardown, diagnostic evaluation, and repair of units to original equipment manufacturer standards, as well as the preparation of Engineering Change Proposals in accordance with DI-SESS-80639E. The final deliverable is a fully functional Battery Power Supply, identified by NIIN 016010679, equipped with a Unique Item Identifier. Operating under NAICS code 334413 for the Department of Defense, the contractor must adhere to strict DFARS regulations regarding counterfeit part mitigation and cybersecurity standards. The procurement process is scheduled with a response deadline of November 23, 2026, ensuring that all technical and security requirements are met to support prime contractors on these critical naval power systems.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Marine Propeller Casting/Material SupplyThis subcontract, managed by the Department of Defense under Navsup Weapon Systems Support Mech, involves the supply of raw materials and base castings for ICU 1600 Class Propellers used in Naval Surface Warfare Center projects. The selected provider will be responsible for casting and forging marine-grade alloys according to precise technical drawing specifications to create raw blanks intended for the repair or replacement of naval propellers. The contractor must possess specialized foundry equipment capable of high-precision production and must strictly adhere to the Buy American Act regarding domestic sourcing. The final deliverable consists of raw or semi-finished propeller castings. Interested parties must respond by November 9, 2026.

All Other Rubber Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Marine Propeller Teardown, Evaluation, and RepairThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support Mech, involves the teardown, evaluation, and physical repair of a Left Hand ICU 1600 Class Propeller for prime contractors supporting Naval Surface Warfare Center projects. The scope of work includes disassembling the propeller to assess wear, performing specialized machining and welding to align with technical drawings, and conducting rigorous quality assurance testing. All work must be performed using precision machining tools suitable for marine alloys. The contractor is responsible for delivering a fully repaired, inspected, and tested propeller accompanied by a detailed report. Final packaging must adhere to MIL-STD-129 standards. This opportunity falls under NAICS code 332999, with a response deadline set for November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-STD-130 Physical Identification ServicesThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing physical marking and unique identification services for repaired assets. The selected contractor will be responsible for applying hardware markings in accordance with MIL-STD-130, REV N and implementing Item Unique Identification per DFARS 252.211-7003. These tasks will be executed using specialized labels or industrial laser engravers to ensure all assets are delivered with verified unique identifiers. The opportunity is categorized under NAICS code 339999 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Telecommunications Replacement Parts SupplierThis subcontract opportunity with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, seeks a supplier for telecommunications replacement parts. The scope of work involves providing circuit boards, housings, internal parts, and other replacement components for prime contractors. All supplied items must be OEM or approved equivalents for NSN 5805-01-540-0342 and must strictly adhere to CAGE Code OKPC5 specifications. The selected supplier is required to ensure full compliance with the Buy American Act and must provide Certifications of Conformance for all delivered certified replacement parts. This procurement falls under NAICS code 423610, with a response deadline set for November 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS