Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Power Transformer Supply

Active

State & Local

Response Deadline11/12/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Vallejo Flood and Wastewater District involves the manufacture and delivery of high-voltage electrical equipment. The scope of work specifically requires the provision of a replacement pad-mounted transformer, identified as T-EP-1, along with associated 5kV/480V components. All equipment must be UL-listed, delivered in original packaging, and include a supply of spare parts and consumables sufficient for twelve months of operation. The project is located in Vallejo, California, under NAICS code 335311. The solicitation was posted on October 12, 2026, with a response deadline set for November 12, 2026. The selected subcontractor will be responsible for the complete delivery of the transformer and all related electrical components to the prime contractor.

General Info

Agency

California → Vallejo Flood & Wastewater District

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

Vallejo, CA, 94590, USA

Set-Aside

NONE

Documents

This scope was carved out of PEE010.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Carquinez Effluent Pump Station Electrical Mitigation Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 10:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Vallejo Flood & Wastewater District

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Vallejo Flood & Wastewater District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-voltage electrical equipment for prime contractors on Vallejo Flood & Wastewater District projects. Manufactures and delivers a replacement pad-mounted transformer (T-EP-1) and associated 5kV/480V components. Provides UL-listed equipment in original packaging along with spare parts and consumables for 12 months of operation. Delivers the completed transformer and electrical components.

Similar Contracts

Same NAICS industry code

Manufacturer of Pre-Assembled Switched Capacitor BanksThis subcontract involves the manufacture and supply of factory-assembled, pre-wired switched capacitor banks for prime contractors working on City of Austin distribution projects for Austin Energy. The scope of work requires the fabrication of 600 kVar or 1200 kVar units designed for 12.47 kV, 3-phase, 60 Hz systems. Technical specifications mandate the use of PCB-free dielectric fluid and ASTM B-8 stranded copper wire to ensure safety and performance. All delivered units must be UL Listed and strictly adhere to industry standards established by ASTM, ANSI, IEEE, IEEA, NEMA, and UL. The selected manufacturer is responsible for delivering fully completed and pre-wired capacitor banks that meet these rigorous engineering and regulatory requirements.

POSTED

about 22 hours ago

DEADLINE

59--TRANSFORMER,POWER AUTO

Solicitation # SPE7M227T0049

DLA Weapons Support

POSTED

about 22 hours ago

DEADLINE

61--WIRING HARNESS,BRANCHE

Solicitation # SPE4A727T1045

POSTED

about 22 hours ago

DEADLINE

Control Power Transformer SupplierThis subcontract opportunity is for a supplier to provide control power transformers for prime contractors working on Lincoln Electric System projects in Nebraska. The selected supplier will be responsible for manufacturing transformers to specific voltage ratios, specifically 12470GY/7200-120, and ensuring the delivery of the completed units. The solicitation was posted on October 9, 2026, with a response deadline of October 27, 2026. This procurement falls under NAICS code 335311 and is managed through the Lincoln Electric System procurement portal.

Lincoln Electric System

POSTED

DEADLINE

Padmount Capacitor Bank ManufacturerThis subcontract opportunity is for a manufacturer to produce and assemble twelve complete padmount capacitor banks for prime contractors working on Lincoln Electric System projects. The scope of work includes the fabrication of enclosures that adhere to IEEE Std C57.12.28-2023, as well as the integration of control transformers, vacuum switches, and capacitor units. The selected provider must also supply all necessary Operation and Maintenance Manuals and approval drawings. Qualified candidates must possess industrial metal fabrication facilities and a minimum of 10 years of specialized experience in manufacturing pad-mounted capacitor enclosures. This project falls under NAICS code 335311, with a response deadline set for October 27, 2026.

Lincoln Electric System

POSTED

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE4A6-26-T-30TZ

Solicitation SPE4A6-26-T-30TZ is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 34 electrical power cable assemblies, identified by NSN 6150016809283 and Federal Equipment Co part number MXCOW-19. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania with a required delivery date of September 16, 2026, and a delivery window of 158 days. Shipping is designated as FOB Origin under the First Destination Transportation program. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific physical identification requirements per RQ017. Inspection and acceptance will occur at the destination, with acceptance requiring zero non-conformances in the sample lot. Key regulatory compliance includes the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the prohibition of additive manufacturing processes unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M0-26-T-103Z

Solicitation SPE7M0-26-T-103Z is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of two power transformers, identified by NSN 6120-01-691-9241 and part number 1029052. The acquisition falls under NAICS code 335311 and requires delivery to the USNS Ruth Bader Ginsburg in San Diego, California. The original required delivery date is September 25, 2026, with a delivery timeframe of five days after order. Shipping is designated as FOB Origin and must be handled via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and RP001, and prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Inspection and acceptance will occur at the destination. Offerors must submit quotes through the DLA Internet Bid Board System by October 9, 2026. Compliance with the Buy American Act, Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and combating trafficking in persons is required. Payment processing will be managed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Transformers and Safety Switches SupplyThis subcontract opportunity with Harris County, Texas, involves the supply and delivery of dry-type transformers and industrial safety switches for prime contractors working on Precinct 3 projects. Required equipment includes dry-type transformers ranging from 5 KVA to 75 KVA that comply with DOE 2016 efficiency standards, as well as safety switches from 30A to 800A featuring UL listed NEMA 1 or NEMA 3R enclosures. Eligible bidders must be a manufacturer or an authorized distributor capable of providing equipment delivered F.O.B. Inside. The solicitation was posted on October 9, 2026, and the deadline for responses is October 26, 2026.

POSTED

DEADLINE

CABLE ASSEMBLY SPEC

Solicitation # N0010427QNA16

This solicitation, issued by Navsup Weapon Systems Support Mech, is a small business set-aside for the teardown, evaluation, and repair of Cable Assembly Spec (NSN 7HH 6150-01-573-7182). The requirement is pursued under Emergency Acquisition Flexibilities and will be awarded to the responsible offeror providing the lowest priced, technically acceptable offer. The resulting contract will be a Firm-Fixed Price agreement, with the contractor required to provide a final quote for the full repair effort within 90 days of receiving the carcass. All repaired assets must be returned as A Condition Stock and meet operational requirements defined by the applicable technical drawings and standards. Key performance requirements include strict adherence to a Repair Turn Around Time (RTAT), with failure to meet this timeline resulting in unit price reductions. The contractor is responsible for all costs associated with the receipt and complete repair of materials, including those in unwhole or damaged condition. Deliverables must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073, with specific DLR labeling and hazardous material certifications required where applicable. The contract is DO certified for national defense under the Defense Priorities and Allocations System, and final inspection and acceptance must be obtained from the Government within the established RTAT.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

61--TRANSFORMER,POWER, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QHA68

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, seeks a contractor to provide all labor, materials, facilities, and tooling necessary to overhaul, upgrade, repair, test, and inspect power transformers (P/N 014521359, DSH1079-1) to return them to a Ready For Issue condition. The scope includes disassembly, cleaning, component replacement, and rigorous testing. A recent amendment increased the required quantity from 3 to 9 units. The requested turnaround time for these repairs is 52 days, with a general delivery requirement of 90 days. GE Aviation Systems LLC is identified as the repair source located in Vandalia, Ohio. The contractor must maintain a quality control system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1 standards. Key technical requirements include adherence to MIL-STD-130 for markings and MIL-STD-2073-1 for packaging. The government retains formal Material Review Board authority for as-is dispositions, while the contractor is responsible for initial inspections at the origin. Award is based on a single-award selection where past performance is the primary evaluation factor and price is secondary. Invoicing and payment are processed electronically via the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010427QBB00

Solicitation N0010427QBB00 is a request for quotations issued by the Navsup Weapon Systems Support Mech for the manufacture and design of one power supply, identified by part number 14021-0009-01 and NIIN 016800647. The procurement is a total small business set-aside, and award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability is based on compliance with solicitation instructions and the absence of exceptions to the terms. The government will utilize the Supplier Performance Risk System to evaluate item, price, and supplier risk. The contract is a fixed-price agreement with FOB Destination terms. Inspection and acceptance will occur at the contractor's or subcontractor's plant. The contractor is required to maintain an acceptable inspection system and provide a Certificate of Compliance upon delivery. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 standards, with specific requirements for electrostatic protection and item unique identification per MIL-STD-130. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Key regulatory requirements include compliance with cybersecurity maturity model certification levels, the Buy American and Balance of Payments Program, and strict prohibitions against the intentional addition of mercury to hardware. Offerors must provide CMMC unique identifiers for information systems handling covered defense information. Additionally, a 10 percent price evaluation preference is applied to HUBZone small business concerns. All quotes must remain valid for 60 days after the closing date.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Flow Switches (NSN 5930-01-040-0214)This subcontract involves the supply of nine specialized flow switches, identified by NSN 5930-01-040-0214, for the DLA Weapons Support Electrical Devices Division. The contractor is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act and the Berry Amendment. All items must be packaged and marked according to MIL-STD-129 and RP001 standards for delivery to DLA Distribution San Joaquin in Tracy, California. To qualify for this contract, the provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program status, and meet CMMC Level 2 cybersecurity requirements. The project falls under NAICS code 335311 and requires adherence to rigorous Department of Defense specifications to support prime contractors on critical electrical device projects.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from California → Vallejo Flood & Wastewater District

Same awarding agency

Joint Fillers and SealantsThis subcontract opportunity with the Vallejo Flood and Wastewater District in California involves the supply and installation of joint fillers and caulking for prime contractors. The selected provider will be responsible for applying sealants and joint fillers in strict accordance with project specifications to ensure the delivery of completed joint sealing services. The project is located in Vallejo, California, under NAICS code 238390. Interested parties must submit their responses by the deadline of November 12, 2026, following the posting date of October 12, 2026.

Other Building Finishing Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Asphalt Paving and RestorationThis subcontract for Asphalt Paving and Restoration involves providing supplies and installation services for asphalt concrete pavement on projects managed by the Vallejo Flood and Wastewater District in Vallejo, California. The scope of work includes the application of tack prime coats, hot mix asphalt pavement bases, and surface courses, as well as the execution of permanent and temporary trench paving, pavement reclamation, and the installation of asphalt curbs and berms. All work must be completed to Greenbook and AASHTO standards to ensure restored surfaces match existing grades. The opportunity was posted on October 12, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 237310, this contract is intended for providers capable of supporting prime contractors in delivering high-quality paving and restoration services within the specified jurisdiction.

Highway, Street, and Bridge Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Trenching and ExcavationThis subcontract for Trenching and Excavation involves providing specialized earthwork services for prime contractors operating on Vallejo Flood and Wastewater District projects in Vallejo, California. The scope of work includes asphalt sawcutting, trench excavation via hand digging or vacuum methods, the placement of conduit bedding, mechanical compaction, and groundwater removal. Additionally, the contractor is responsible for utilizing H40 loading steel trench plates and Controlled Low-Strength Material for backfilling under utilities to ensure the proper delivery of excavated and backfilled trenches. The opportunity was posted on October 12, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 238910, this contract focuses on critical infrastructure support within the California region. Interested parties must adhere to the specified technical requirements for utility backfilling and excavation to maintain the standards required by the district.

Site Preparation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Industrial Painting and CoatingThis subcontract for Industrial Painting and Coating involves providing shop and field painting services for prime contractors working on Vallejo Flood and Wastewater District projects in Vallejo, California. The scope of work includes comprehensive surface preparation using hand tools, power tools, and blast cleaning to meet White Metal, Commercial, and Near-White Metal SSPC standards. The contractor is responsible for applying coatings and identification to piping and equipment using OSHA safety colors, with the potential for work to be performed in confined spaces. The opportunity was posted on October 12, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 238320, the contract focuses on the delivery of professionally coated and identified industrial equipment and piping to ensure safety and regulatory compliance within the district's infrastructure.

Painting and Wall Covering Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Electrical Systems InstallationThis subcontract for Electrical Systems Installation involves performing electrical mitigation for prime contractors on projects for the Vallejo Flood and Wastewater District in Vallejo, California. The scope of work includes the disconnection and removal of 480V conductors and liquid-filled pad-mounted transformers, followed by the installation of new 480V and 5kV power feeders for motor control center MCC-EP and effluent pumps. To ensure durability, the contractor must utilize hot-dip galvanized support channels and 316 stainless steel. The project requires the delivery of a fully operational power distribution system that strictly adheres to IEEE, NFPA, NEMA, and NEC standards. Interested parties must submit their responses by November 12, 2026, for this effort categorized under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Carquinez Effluent Pump Station Electrical Mitigation Project

Solicitation # PEE010

The Carquinez Effluent Pump Station Electrical Mitigation Project (PEE010) is a solicitation issued by the Vallejo Flood and Wastewater District in California for electrical system improvements at the District's main treatment plant site. The scope of work primarily involves providing new 5kV and 480V power feeders for four existing effluent pumps and the existing motor control center MCC-EP. The project requires the contractor to furnish all necessary labor, materials, and equipment, including consumables for commissioning and the first 12 months of operation. Performance is measured from the Notice to Proceed, with a timeline of 200 calendar days for substantial completion and 235 calendar days for final completion. The contract will be awarded to the lowest responsive and responsible bidder. All bidders must submit a Part A package including a bid form, schedule, bidder's bond of at least 10 percent of the total bid price, and certifications for non-collusion and workers' compensation. The three lowest bidders are then required to submit a Part B package within five working days of the bid opening, which includes certifications of experience, safety compliance, and drug-free workplace requirements. Awardees must be licensed under the Contractor's License Law of California and comply with California prevailing wage laws. Project administration is managed through a designated Construction Manager, and payments are processed within 30 days via the District's web-based construction management system. Quality assurance is strictly enforced through random weekly inspections and a rigorous acceptance process involving NETA motor testing, thermographic surveys, and final certification by the District General Manager. All electrical work must adhere to ANSI, ASTM, IEEE, and ICEA standards. Contractors are also required to provide faithful performance and labor and materials payment bonds executed by sureties admitted in the State of California.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS