Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Close Tolerance Screws Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and supply of high-precision screws identified by NSN 5305-00-354-4919, engineered to meet stringent military specifications and tight dimensional tolerances required for critical defense applications. The work falls under NAICS code 332722, indicating it is focused on screw, nut, and bolt manufacturing, and is structured as a subcontract awarded by the Defense Logistics Agency under the Department of Defense. Production must adhere to MIL-SPEC standards to ensure reliability, durability, and compatibility with existing military systems. The place of performance and exact delivery location are not specified, but the requirement implies nationwide or global logistics coordination to support military readiness. The contract was posted on July 17, 2026, and is accessible via the DIBBS system with specific contract identifiers for tracking and verification purposes.

General Info

Manufacture and supply of MIL-SPEC screws for defense use under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of high-precision screws under NSN 5305-00-354-4919 requiring tight tolerances and MIL-SPEC compliance.

Similar Contracts

Same NAICS industry code

SCREW, CAP, HEXAGON HThe contract specifies the procurement of 8 units of a hexagon cap screw, identified by NSN 5305-01-698-5982 and conforming to ISO 4017 Revision 6 dated 06/01/2022 with a size designation of M12x70-10.9-ZN5/AN. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization adherence to specified standards. Inspection and acceptance occur at destination, with firm fixed pricing and zero tolerance for quantity variance. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The delivery window is 200 days after order date, with the freight destination being Prince Hassan Air Base in Jordan under a shipment RDD 777. The contract is issued under solicitation SPE4A6-26-Q-1208 with a response deadline of July 31, 2026, and the item is sourced for the Royal Jordanian Air Force through the U.S. Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract is for 4 units of a hexagon cap screw, NSN 5305-01-698-5982, manufactured to ISO 4017 revision 6 dated 06/01/2022 with a specification of M12x70-10.9-ZN5/AN, and must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The item must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA Packaging Requirements, including specific preservation, wrapping, and packaging materials with no special marking required. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. The contract specifies a firm fixed price with no variance allowed in quantity, and delivery must be made to the Royal Jordanian Air Force at Prince Hassan Air Base in Safawi, Jordan, within 200 days after the award date. Inspection and acceptance occur at destination, with FOB origin terms applying, and all transportation details follow DLA procedural notices. The unit of issue is each, and pricing details are to be filled in by the vendor. The solicitation, issued by the Department of Defense, has a response deadline of July 31, 2026, with a projected ship date of June 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

NUT, HEX, HEAVYThis contract is for the procurement of Heavy Hex Nuts designated as Special Emphasis Level I material, critical to the safe and reliable operation of shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must conform to Leslie Controls Drawing 36938N and ASTM-A194 Grade 2H or Grade 7, with stringent requirements for chemical and mechanical certification, traceability, and nondestructive testing using either liquid penetrant or magnetic particle inspection in accordance with T9074-AS-GIB-010/271 and MIL-DTL-1222. Each shipment must include an additional fastener per heat/lot with full traceability, and all materials must be permanently marked with traceability identifiers per MIL-STD-792, including manufacturer and material symbols. Certification reports must be complete, unqualified, and directly linked to the physical part, with transcription explicitly prohibited. The contract mandates adherence to ISO-9001 or an approved alternate quality system, with Government Quality Assurance conducting inspections at the supplier's facility. All certifications and test data must be submitted via WAWF to Portsmouth Naval Shipyard (N50286) and reviewed and accepted prior to shipment, with no material allowed to be shipped without formal acceptance. The contract incorporates stringent controls for configuration management, requiring formal Engineering Change Proposals for any modifications affecting form, fit, function, or interface, and prohibits unauthorized deviations or waivers without prior written approval from the Contracting Officer. Material must be mercury-free, internal threads must be cut and not cold-formed, and packaging requirements exclude specific container types but mandate MIL-STD-129 labeling and thread protectors. The solicitation is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, indicating national defense priority. Subcontractors are subject to the same quality requirements as the prime, and the buyer is responsible for ensuring supplier capability through documented evaluation and audit procedures. Delivery must be completed within 365 days of contract effective date, with submission of certification data due no later than 20 days prior to scheduled delivery. Offers must not include quantity discounts across multiple CLINs to avoid unreasonably low award values, and the solicitation may result in multiple awards. The contract also enforces Buy American provisions, small business subcontracting obligations, and strict cybersecurity and data handling protocols under recent defense deviations and prohibitions.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 2 months

5305 FASTENERSThe Fleet Logistics Center Puget Sound is seeking quotations for specific fastener items identified by part numbers MIL-S-1222, MIL-DTL-1222, M1222N1W26C20NANN, M1222RW26C2168NCNN, and M1222RW26C288NCLN under solicitation number N0040626Q0434. This is a total small business set-aside under NAICS code 332722, meaning only small businesses are eligible to respond. All responsible small business sources are encouraged to submit bids or proposals, which will be evaluated based on technical factors including delivery date, price, and past performance, with no single factor given priority. The response deadline is August 3, 2026, and the anticipated award date is August 2026. The contracting officer is Lorraine Small, reachable at lorraine.m.small.civ@us.navy.mil, and the solicitation is managed from the office in Bremerton, Washington, under the Department of Defense.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 11 hours ago

DEADLINE

BOLT, SHEARThis contract pertains to the procurement of five BOLT, SHEAR items identified by NSN 5306-01-286-5435 and part number SS5116-10-68, classified as a commercial item and designated as a critical application component. Approved sources include SIKORSKY AIRCRAFT CORP, AVIBANK MFG INC, and SPS TECHNOLOGIES INC, with manufacturing potentially requiring casting or forging and associated tooling not held by the government; any such needs must be addressed through a formal Casting and Forging Assistance Request. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must meet MIL-STD-129 and DLA Packaging Requirements, with palletization governed by RP001. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise stated, and attributes are assigned verification levels corresponding to strict AQLs. Delivery is due within 20 days of contract award, FOB origin, with no quantity variance permitted, and shipment must utilize the fastest traceable means, excluding parcel post. Materials must be marked in accordance with RQ017 physical identification requirements and shipped to Fort Carson, Colorado, with specific freight and receiving points identified. The contract is governed by solicitation SPE4A7-26-T-592J, with a required delivery date of July 17, 2026, and procurement under a federal acquisition framework with unit price and total value specified for the five-unit order.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BOLT, SHEARThe contract solicitation SPE4A6-26-T-06TX is for the procurement of 98.4 hundreds of BOLT, SHEAR with National Stock Number 5306-01-436-1471 under a Total Small Business Set-Aside, with performance required at Tinker AFB, Oklahoma. Delivery must occur within 110 days of award, with FOB Origin terms meaning inspection and acceptance occur at the contractor’s facility. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersede general industry standards like ASTM D3951, and packaging and labeling must adhere to MIL-STD-129, including NSN, CLIN, lot number, quantity per unit pack, and unit of issue markings. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign nationals and requiring contractors to hold approved US/Canada Joint Certification Program certification, complete mandatory DLA export control training, and be authorized by DLA to access controlled information. Cybersecurity compliance at CMMC Level 2 is mandated, requiring either a self-assessment or certification by a C3PAO, along with adherence to safeguarding requirements for Covered Defense Information as outlined in DFARS 252.204-7012 and NIST SP 800-171. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and all non-accepted items must have government identification removed prior to return. Item Unique Identification is not required per service customer direction. The contract includes multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, hazardous materials, whistleblower rights, cyber incident reporting, prohibiting covered telecommunications equipment, sustainable products, and payment through WAWF. The offeror must be a small business with a valid Unique Entity ID and must complete socioeconomic representations including WOSB, EDWOSB, SDVOSB, HUBZone, and SDB statuses if applicable, and disclose all joint venture participants. No pricing details are provided in the solicitation, and contract type is pending formal insertion under FAR 52.216-1, though FFP is likely given the simplified acquisition context. All proposals must be submitted electronically via DIBBS by the deadline of July 28, 202

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SCREW, CAP, HEXAGON HEADThe contract specifies the procurement of 1,691 units of a hexagon head cap screw, identified by NSN 5305-00-904-4009 and part number AEB02FA00B75WA6AA1, manufactured to meet ASME B18.2.1 standards with a Thread Class 2A designation. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, with older revisions accepted only if they were current at the time of manufacture. Quality assurance is governed by tailored higher-level requirements and the Certificate of Conformance procedures under FAR 52.246-15, unless overridden by a Quality Assurance Letter of Instruction. Inspection and acceptance occur at origin using zero-defect sampling based on MIL-STD-1916 or comparable zero-based plans, with critical attributes requiring a verification level of VII or AQL 0.1. The screw bears no shelf life restriction and must be marked per MIL-STD-130N and MIL-STD-129, including manufacturer details, lot numbers, and item identification, with no special marking required. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, prohibiting mercury or mercury compounds in preservation or packaging materials. Delivery is FOB origin within 182 days, with no quantity variance permitted, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 30, 2027. The item is designated as a critical application component, and all technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

NUT, PLAIN, EXTENDEDThe contract specifies the procurement of 50 units of a plain extended nut identified by NSN 5310-01-392-9590 and part number 094-13200, supplied by Aircraft Wheel and Brake, LLC under solicitation SPE4A6-26-T-09HS. Delivery is required within 324 days of contract award with a final ship date of June 21, 2027, and the items must be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict compliance with DLA packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and RP001 for DLA packaging requirements, with no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances in sampling as per MIL-STD-1916 or ASQ H1331, unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. Unit of issue is HD, pricing is established per the CLIN, and the total quantity is fixed with no variance allowed. Transportation and freight details are governed by DLAD procedural notes C19 and C20, and the item falls under NAICS code 332722 for federal procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SEAL ASSEMBLY, MISSIThe contract pertains to the procurement of a seal assembly for missile launch applications, identified by NSN 5330-01-596-8037 and part number 293-21601-161-0420, manufactured by GREENE TWEED & CO INC. A total of 88 units are required at a unit price of $88.00, with a total contract value of $7,744. Delivery must be completed within 150 days of the contract award, with the original required delivery date set for December 28, 2026, and a planned ship date of January 1, 2027. The items are to be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, Type II, Class C, Style 1 as specified in MIL-DTL-117, using medium duty, waterproof, greaseproof, and opaque bags to protect against UV deterioration, in alignment with DLA packaging requirements. Marking and palletization must adhere to MIL-STD-129 and RP001, with no special marking codes required. The item is classified under Federal Supply Class 5330/5331 and is prohibited from containing any asbestos as defined by FED-STD-313. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. All hazardous materials packaging and shipping must meet IP025 standards. Deliveries are to be routed to DLA Distribution Depot Hill in Hill AFB, Utah, with transportation guided by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-280W, incorporates technical and quality requirements referenced from the DLA Master List, and applies to direct vendor delivery, foreign military sales, and stock shipments.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SCREW, MACHINEThis contract specifies the procurement of machine screws identified by NSN 5305-00-855-8216 and part number MS27039DD1-15, manufactured to the current revision of the non-government standard NASM27039 Revision 6 dated 01/30/2026. The item is classified as a critical application requiring full compliance with MIL-STD-130N for identification marking, with markings to conform to paragraph 4.1.b(2) unless otherwise specified, in addition to manufacturer logos, lot numbers, and material identifiers. The unit of issue is PG, defined as 50 screws per pack, with a total quantity of 37 PG ordered, and zero variance is permitted in delivery quantity. All hardware must be produced to the current revision of the applicable standard, and previously manufactured items meeting prior but then-current revisions remain acceptable provided they meet all other requirements. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, including RQ001 for tailored quality provisions, RQ009 for inspection and acceptance at origin, and RQ011 for removal of government markings from non-accepted items. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 requirements, and all labeling must reflect the specified unit of issue and quantity per unit pack. Delivery is FOB origin with a 71-day lead time, to be completed by November 30, 2026, and inspection and acceptance occur at the destination facility in New Cumberland, PA. Transportation logistics and shipping addresses are defined under DLAD procedural notes, with the primary point of contact listed as Myonka Boyd of the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

STUD, PLAINThis contract specifies the procurement of 12 plain studs with part number PL-999R0501-CPC57 and NSN 5307-01-266-0617 under solicitation SPE4A6-26-T-03AS, issued by the Department of Defense’s ASC Commodities Division. Delivery is required FOB origin within 20 days of contract award to the Puget Sound Naval Shipyard in Bremerton, Washington, with no tolerance for quantity variance. Inspection and acceptance occur at the supplier’s origin, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 marking with no special markings required. The item is classified as a critical application component, and mercury or mercury-containing compounds are prohibited except for specific exempted uses such as certain batteries, lighting, sensors, and weapon systems under NAVSEA guidelines, with mandatory secondary containment for portable devices. Sampling for quality control follows MIL-STD-1916 or ASQ H1331 with verification levels assigned as VII for critical, IV for major, and II for minor attributes, unless otherwise directed. The supplier must adhere to configuration change management protocols, source approval requirements, and removal of government identification from non-accepted items. Unit of issue is each, priced at $12.00 for a total of $144.00, with traceable shipping mandated and parcel post prohibited. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List effective on the solicitation issue date, and the item does not require Unique Item Identification per customer request.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract specifies the procurement of 26 metric socket head cap screws identified by NSN 5305-01-645-6820 and part number B1831DH080025N, manufactured to meet the current revision of ASME B18.3.1M standard, with previous revisions acceptable only for items produced before the solicitation date. All items must comply with stringent technical and quality requirements from the DLA Master List, including physical identification, packaging, and inspection protocols. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, reflecting the item’s critical application status. Inspection and acceptance occur at origin, with no tolerance for quantity variance—exactly 26 units must be delivered. Delivery is scheduled for 169 days after award, with a required ship date of January 17, 2027, and FOB origin terms apply. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. Pricing is fixed at $26.00 per unit, totaling $676.00, with no adjustment permitted. The contract is issued under solicitation SPE4A6-26-T-09KW, with compliance to all applicable DLA technical directives overriding any conflicting standards. All markings, labeling, and documentation must reflect DLA requirements, and the sole point of contact is Ashley Jones-Turner of the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 6 hours ago

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

about 6 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

Logistics and FOB Destination Delivery ServicesThe contract requires delivery of goods under FOB destination terms with a strict timeline of 20 days from the date of award, ensuring all shipments meet precise logistical standards. This includes proper palletization that complies with military specifications, end-to-end tracking throughout the transportation process, and timely submission of invoices through the Wide Area Workflow system to meet Defense Logistics Agency requirements. The performance location is designated as FPO 34087, indicating delivery to military addresses overseas, and the work falls under NAICS code 484220, which classifies it as truck transportation for local and long-haul freight services. As a subcontract under the Department of Defense, the provider must align with DLA’s operational protocols for defense supply chain compliance. All proposals must be submitted by the response deadline of August 3, 2026, and the contract is structured to support reliable and audit-ready logistics for critical military supply needs.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires comprehensive packaging and labeling services for hazardous material shipments destined for the Defense Logistics Agency, ensuring full compliance with MIL-STD-129 and GHS standards. This includes the application of accurate shelf-life coding and the integration of passive RFID tagging to enable secure, traceable logistics throughout the supply chain. All activities must align with federal regulations for handling dangerous goods, with performance centered at the FPO address with ZIP code 34087, indicating operations may involve overseas or military postal locations. The subcontract, classified under NAICS code 561910 for other support services, is aimed at enhancing the safety, identification, and tracking of hazardous materials in defense logistics. Proposals are due by August 3, 2026, and the contract falls under the Department of Defense’s authority, with no specific set-aside status indicated.

Packaging and Labeling Services

POSTED

DEADLINE

Silver Solder Paste Manufacturing and SupplyThe contract is for the manufacturing and supply of commercial-grade Silver Solder Paste in RMA formulation, packaged in 8-ounce containers, with all materials required to meet ASTM B32 specifications and DLA packaging standards. The product must be delivered with full shelf life intact and feature compliant labeling that adheres to all regulatory and military requirements. The performance location is designated as FPO with a ZIP code of 34087, indicating a military postal address as the final delivery point. The solicitation is classified as a subcontract under NAICS code 325998, which covers other chemical product and preparation manufacturing. The Defense Logistics Agency, operating under the Department of Defense, is the issuing organization, and responses must be submitted by August 3, 2026. There is no set-aside designation applied to this opportunity, and it is open to eligible contractors meeting the technical and packaging criteria. The official portal for the solicitation is accessible via the provided DIBBS link.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and maintenance of cybersecurity safeguards for covered contractor information systems to align with NIST Special Publication 800-171 and associated DFARS requirements, ensuring the protection of covered defense information. This subcontract is issued by the Defense Logistics Agency under the Department of Defense and applies to systems handling sensitive defense data, with compliance mandating adherence to a comprehensive set of security controls designed to mitigate risks from cyber threats. The place of performance is designated as Dyess Air Force Base with a ZIP code of 79607-1510, and the solicitation is classified under NAICS code 541512, indicating it relates to computer systems design services. The proposal response deadline is August 3, 2026, and the opportunity was posted on July 23, 2026. While no set-aside type is specified, recipients must be prepared to meet rigorous federal cybersecurity standards and demonstrate operational capability to enforce and sustain the required controls throughout the contract lifecycle.

Computer Systems Design Services

POSTED

DEADLINE

Hazard Communication & Regulatory Compliance SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for all non-exempt hazardous materials before a contract award is made, ensuring full regulatory compliance with hazard communication standards. This work must be completed with precision to meet federal safety and labeling requirements, particularly for materials used in defense operations. The scope is limited to documentation delivery and does not include fabrication, distribution, or handling of the hazardous substances themselves. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance at Dyess Air Force Base, Texas, 79607-1510. The solicitation falls under NAICS code 541620, indicating it is for environmental consulting and related services. The posting date is July 23, 2026, and responses are due by August 3, 2026. No set-aside classification is specified, and the opportunity is open to qualified subcontractors able to deliver compliant hazard communication documentation on schedule. All submissions must adhere to federal regulations applicable to hazardous material reporting prior to any award.

Environmental Consulting Services

POSTED

DEADLINE