Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Component Manufacturing (Push-Pull Control Assembly)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 87 Push-Pull Control Assemblies for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations Engines projects. The contractor is required to fabricate these assemblies according to Oshkosh Defense LLC P/N 1719520 and NSN 2590-01-351-8327 specifications. Production must be carried out using precision CNC machining, as additive manufacturing is strictly prohibited. The project demands strict adherence to the DLA Master List of Technical and Quality Requirements and requires the contractor to be compliant with NIST SP 800-171 standards. Performance of the contract will take place in Tracy, California. Interested parties must respond by November 2, 2026, regarding this precision component manufacturing effort categorized under NAICS code 336992.

General Info

Manufacture 87 Push-Pull Control Assemblies for DoD via CNC machining in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L5-27-T-0287.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTROL ASSEMBLY, PUSH-

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies Push-Pull Control Assemblies for prime contractors on DLA Weapons Support Land Supplier Operations Engines projects. Fabricates assemblies to Oshkosh Defense LLC P/N 1719520 and NSN 2590-01-351-8327 specifications using precision CNC machining; additive manufacturing is prohibited. Requires NIST SP 800-171 compliance and adherence to DLA Master List of Technical and Quality Requirements. Delivers 87 completed assemblies.

Similar Contracts

Same NAICS industry code

Precision Fabrication of Stowage Trays (NSN 2590-00-622-7050)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

CONTROL ASSEMBLY, TRANS

Solicitation # SPE7L1-27-T-2204

Solicitation SPE7L1-27-T-2204 is a fixed-price contract issued by the DLA Weapons Support Land Supply Chain for the procurement of four transmission control assemblies, identified by NSN 2520-01-465-5184. The requirement is designated as a total small business set-aside under NAICS code 336992. Delivery is required within 418 days after the award, with a specified need ship date of September 27, 2027, for delivery to the DDSP New Cumberland facility in Pennsylvania. The procurement is conducted under the First Destination Transportation program to optimize shipping costs. The contract mandates strict adherence to technical specifications, including multiple reference drawings and quality standards such as SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin per FAR 52.246-2, and the contractor must perform first article testing on one unit with 14 days' notice to the government. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and Special Packaging Instruction AK14655184. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and export control regulations regarding ITAR and EAR technical data. Cybersecurity requirements include CMMC Level 2 certification and safeguarding of covered defense information. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

CONTROL ASSEMBLY, PUSH-

Solicitation # SPE7L5-27-T-0287

Solicitation SPE7L5-27-T-0287 is issued by the DLA Weapons Support Land Supplier Operations Engines for the procurement of 87 units of a push-pull control assembly, identified by NSN 2590-01-351-8327 and Oshkosh Defense LLC part number 1719520. This is not a small business set-aside, and the acquisition falls under NAICS code 336992. The required delivery date is February 18, 2027, with a need ship date of January 13, 2027. Delivery is established as FOB Origin, and the items are to be shipped to DLA Distribution San Joaquin in Tracy, California, under the First Destination Transportation program. The contract mandates strict adherence to DLA packaging requirements via RP001 and requires inspection and acceptance at the destination. All quotes must be submitted through the DLA Internet Bid Board System, and the government will not evaluate offers utilizing additive manufacturing. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The agreement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and the Hazard Communication Standard for any applicable hazardous materials.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1125

Solicitation SPE7L3-27-T-1125 is a procurement request by the Defense Logistics Agency for 24 stowage trays, identified by NSN 2590-00-622-7050. The items must be manufactured according to TDP Rev B Gen 2 and Basic Drawing NR 19207 10866676 Revision H. Delivery is required by August 4, 2027, with a need ship date of April 20, 2027, and shipments are to be delivered FOB Origin to the DLA Distribution DSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring manufacturer inspection systems to meet SAE AS9003 or ISO 9001 standards. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance criterion. Packaging must adhere to ASTM D3951 and RP001, while marking must comply with MIL-STD-129. Technical data is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is not a small business set-aside and falls under NAICS code 336992. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and CMMC Level 2 certification. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

FLANGE, EXHAUST PIPE

Solicitation # SPE7L4-27-T-0539

Solicitation SPE7L4-27-T-0539 is a request for quotations issued by the DLA Weapons Support SLO Combat Vehicles and Armament for the procurement of 48 exhaust pipe flanges, identified by NSN 2990014172264. The contract requires delivery within 168 days after order, with a need ship date of April 20, 2027, and an original required delivery date of April 22, 2027. Shipping is established as FOB Origin, with the final destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is subject to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must adhere to DLA requirement RP001. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001 and the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Evaluation factors include a price preference for HUBZone concerns, while items produced via additive manufacturing are ineligible for award. All quotes must be submitted through the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

BASE ASSEMBLY, HEADL

Solicitation # SPE7L3-27-T-1165

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

LEG, SEMITRAILER RETRAC

Solicitation # SPE7L3-27-T-1131

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Tactical Wheeled Vehicle (TWV) Industry Engagement Interest & Security Registration Form

Solicitation # W912CH-26-I-TWV1

The Department of Defense, through the Portfolio Acquisition Executive for Agile Sustainment and Ammunition, is conducting a multi-phase Tactical Wheeled Vehicle (TWV) Industry Engagement under presolicitation W912CH-26-I-TWV1. This initiative aims to move away from rigid procurement models toward agile contracting to develop survivable and cost-effective light-duty (under 8,500 lbs GVW) and medium-duty (8,500 to 16,000 lbs GVW) vehicle fleets. The primary goal is to leverage industry innovation and data-driven insights to inform the Army's strategic programming and budgeting for the Fiscal Year 2030 Program Objective Memorandum cycle. Phase 1 of this engagement consists of interactive briefings and vignettes scheduled for November 9 to 10, 2026, in Ann Arbor, Michigan. The event includes government-led sessions on Army challenges, industry input on problem statements, and limited one-on-one sessions for discussing proprietary concepts. Due to the event being designated as Controlled Unclassified Information with Distribution Statement C, participants must be U.S. citizens and provide an active DD Form 2345 through the Joint Certification Program. Interested organizations are limited to three representatives and must submit their registration and security certifications by October 28, 2026.

Department Of Defense

POSTED

DEADLINE

SUPPORT, RETRACTABLE, TR

Solicitation # SPE7LX-27-U-0277

Solicitation SPE7LX-27-U-0277 is a total small business set-aside for the procurement of retractable trailer supports, identified by NSN 2590-01-484-0440. This unilateral Indefinite Delivery Contract, managed by the DLA Weapons Support Strategic Acquisition Program Directorate, has a maximum value of 350,000.00 dollars with an estimated annual quantity of 656 units and a guaranteed minimum of 98 units. The contract is not binding until a delivery order is placed. Delivery is required 109 days after the date of order, with shipping, inspection, and acceptance all occurring at the point of origin under the First Destination Transportation program. Technical compliance requires that manufacturers maintain inspection systems complying with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and components must be sourced from approved QPL/QML sources, specifically QPL-10924-37 NOT 1. Due to the nature of the technical data, offerors must have an approved US/Canada Joint Certification Program certification and DLA authorization to access export-controlled data subject to ITAR or EAR. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. All quotes must be submitted via the DIBBS portal, and invoicing is processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

ARMOR, TRANSPARENT, VEHICULAR WINDOW

Solicitation # SPE7L1-27-R-0010

This firm fixed price solicitation, issued by the DLA Weapons Support Land Supply Chain, is a total small business set-aside for the procurement of transparent vehicular window armor, identified by NSN 2541-01-670-6556. The requirement includes a total of 545 units divided across two line items, along with specific requirements for ballistic and non-ballistic production control testing and a contractor first article test. Delivery is scheduled for 300 days after the award date if first article testing is required, or 90 days if waived. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Due to the nature of the equipment, the project is subject to ITAR and EAR export controls, and access to classified drawings is restricted to contractors with an approved DD Form 254 and appropriate facility clearance. Invoicing must be processed electronically through the Wide Area WorkFlow system. Proposals are due by November 18, 2026, and should be submitted via the DIBBS portal or email.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0552

This solicitation, numbered SPE7M3-27-T-0552, is issued by the Defense Logistics Agency (DLA) Weapons Support Fluid Handling Division for the procurement of 41 units of TEE, TUBE (NSN 4730006185382). The item is designated as a critical application item and must be manufactured from steel with cadmium plating, featuring a 1/4 inch outer diameter tube size and a female swivel nut on the first end. Compliance with basic specification MS51523D Revision D and reference specification MIL-DTL-18866K(1) Revision K is required. The contract prohibits the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Delivery is required within 105 days after order, with the FOB point set as origin and the destination for both inspection and acceptance located at DLA Distribution Depot Hill, Utah. Packaging must adhere to ASTM D3951, MIL-STD-129 for labeling, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. The procurement is subject to full and open competition and includes various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Invoicing and payment are to be processed electronically through the Wide Area Workflow (WAWF) system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0316

Solicitation SPE7LX-27-U-0316 is an Indefinite Delivery Contract issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of ECO SORB KITS (NSN 4910-01-620-2364). This is a Total Small Business Set-Aside under NAICS code 336992, with a contract maximum value of 350,000.00 dollars. The requirement consists of an estimated annual quantity of 9 kits, with a guaranteed minimum of 1 kit and a minimum delivery order quantity of 2 kits. Delivery is required within 84 days after order, with terms set as FOB Origin, though inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1 Appendix D for kits, MIL-STD-129 for marking, and RP001 for DLA packaging and palletization. Each unit package must be clearly marked with the NSN, contract number, and relevant CAGE codes. Additionally, the contractor must comply with the Hazard Communication Standard for any hazardous materials and is prohibited from using Class I ozone-depleting chemicals. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract also incorporates various FAR and DFARS clauses regarding the Buy American Act, the Berry Amendment, and cybersecurity safeguarding requirements.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Same awarding agency

Defense-Compliant Packaging and LogisticsThe Defense-Compliant Packaging and Logistics subcontract involves providing specialized military-grade packaging and palletization services for prime contractors supporting DLA supply contracts. The scope of work requires the processing of 82 units for FOB Origin shipment, ensuring strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Additionally, the contractor must maintain full compliance with 29 CFR 1910.1200 regarding the labeling of hazardous materials. This project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines, with performance taking place in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. The contract falls under NAICS code 493110, focusing on specialized logistics and compliant material handling for defense operations.

General Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Fuel Metering and Distributing Pump ManufacturingThis subcontract involves the manufacture of 82 Fuel Metering and Distributing Pump assemblies for prime contractors supporting DLA supply contracts. The work requires precision machining and assembly for NSN 2910-01-586-7961, strictly adhering to the DLA Master List of Technical and Quality Requirements (RA001). The project is governed by Critical Application Item standards and must comply with the Buy American Act, with a specific prohibition against unauthorized additive manufacturing. Performance will take place in Tracy, California, under the oversight of the Department of Defense agency DLA Weapons Support Land Supplier Opns Engines.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency. The selected provider will perform specialized packaging, marking, and labeling for 21 units, ensuring all materials adhere to ASTM D3951 and MIL-STD-129 standards, as well as the DLA Master List RP001. Additionally, the contractor must apply TQ requirement IP025 for any hazardous materials involved in the process. The scope of work culminates in the delivery of the processed units for FOB Origin shipment to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. Interested parties must respond by November 2, 2026, for this project categorized under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Fabrication and Supply of Vehicular Splash GuardsThis subcontract involves the fabrication and supply of 21 vehicular splash guards for prime contractors supporting the DLA Weapons Support Land Supplier Opns Engines. Production must strictly adhere to TDP Rev A Gen 1, Basic Drawing NR 19207 12602791 Revision C/D, and DLA Master List RA001. All delivered units must be compliant with the Berry Amendment and the Buy American Act. The contractor is required to maintain US/Canada JCP Certification and ensure full ITAR/EAR compliance. Additionally, CMMC Level 2 certification is mandatory for the handling of export-controlled data. Performance of the contract will take place in Tracy, California, with a response deadline set for November 2, 2026.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 8 hours ago

DEADLINE

Specialized Defense Packaging and LogisticsThis subcontract for Specialized Defense Packaging and Logistics involves providing military-grade packaging services for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations Engines. The scope of work requires the packaging of 87 control assemblies in strict accordance with MIL-STD-2073-1E and DLA RP001 requirements. Technical specifications mandate the use of QUP 001, Pres Mthd 10, and Clng/Dry 1 standards, utilizing approved military-specification preservatives and cushioning materials. The completed units must be properly packaged and labeled for FOB Origin shipment to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This effort falls under NAICS code 488410 and is managed through the DLA Weapons Support Land Supplier Operations Engines agency.

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

Motor Vehicle Towing

POSTED

about 8 hours ago

DEADLINE

Diesel Engine Guard Heat Shield Fabrication

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on projects for the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations Engines. The scope of work involves specialized military packaging, marking, and palletization of hardware to ensure it is ready for DLA Distribution. All activities must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization intended for First Destination Transportation. The project requires the use of industrial marking systems and compliant military-specification materials. Performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this opportunity categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture of Groove Pulleys (NSN 3020012470481)This subcontract involves the manufacture of 12 precision groove pulleys under NSN 3020012470481 for the DLA Weapons Support Land Supplier Operations Engines. The selected provider must utilize CNC lathes and milling equipment to machine pulley bodies to exact tolerances, including groove cutting and finishing. A strict prohibition is placed on the use of additive manufacturing for these components. The project requires full compliance with the DLA Master List of Technical and Quality Requirements RA001 and DFARS 252.204-7012. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 333515.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306015341685)This subcontract involves the supply of 81,000 packages of machine bolts for prime contractors supporting DLA supply contracts. The hardware must specifically match Oshkosh Defense LLC part number 3334542 and NSN 5306015341685. All items must be packaged according to ASTM D3951 standards and marked and labeled in compliance with MIL-STD-129. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in Albany. Eligible bidders must maintain a valid SAM.gov registration, a Unique Entity ID, and a CAGE code. The response deadline for this requirement is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Engine Oil Pump Assemblies (NSN 2815004788207)This subcontract involves the supply of six completed engine oil pump assemblies for prime contractors supporting DLA Weapons Support supply contracts. The contractor is responsible for manufacturing or sourcing parts that strictly adhere to reference drawings N9207 12516657, N9207 12516659, and N9207 12516661 to ensure compatibility with NSN 2815004788207. All components must meet the rigorous quality assurance and inspection requirements established by the DLA for engine components. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, the project falls under NAICS code 333618. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Hook Bolts (NSN 5306-01-166-3732)This subcontract involves the manufacture or procurement of 68 specialized hook bolts meeting NSN 5306-01-166-3732 specifications for the Department of Defense, specifically supporting the DLA Weapons Support Land Supplier Opns Engines. The contractor is responsible for ensuring all items comply with domestic origin requirements and are properly packaged for shipment. Performance will take place in New Cumberland, Pennsylvania, with delivery handled under FOB Origin terms via the First Destination Transportation program. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS