Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Composite Saw Maintenance (Labcut 5000)

Active

Federal

Response Deadline11/05/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed through the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the annual service and maintenance of the Extec Labcut 5000 Series Advanced Precision Composite Plate Saw. The work is performed in Hampton, Virginia, to support prime contractors on NASA Langley Research Center projects. The primary objective is to ensure operational readiness and reliability while mitigating the risk of unplanned breakdowns through general annual servicing. To qualify for this engagement, the provider must be an authorized Extec equipment service provider. The successful contractor is responsible for delivering a fully maintained and operational saw along with detailed service reports. This requirement falls under NAICS code 811210 and was posted on November 2, 2026, with a response deadline of November 5, 2026.

General Info

Annual maintenance of Extec Labcut 5000 saw for NASA Langley in Hampton, Virginia.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27948601.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

EXperTEC 1 YEAR ANNUAL SERVICE CONTRACT F/LABCUT 5000 50484

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 01:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs annual service and maintenance for the Extec Labcut 5000 Series Advanced Precision Composite Plate Saw for prime contractors on NASA Langley Research Center projects. Conducts general annual service to ensure operational readiness and reliability to mitigate unplanned breakdowns. Requires authorization as an Extec equipment service provider. Delivers a maintained, operational saw and service reports.

Similar Contracts

Same NAICS industry code

Control Panel Housing and Chassis FabricationThis subcontract involves the fabrication of 119 precision metal enclosures and chassis for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The scope of work requires the production of housings based on Drawing NR 81755 and piece numbers 16Z001 and 16PR070, utilizing precision cutting and bending techniques to ensure all components meet strict military tolerances. To qualify for this project, the supplier must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The performance of the contract is centered in the 95304-5000 zip code area, with a response deadline set for December 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Patient Hoists, Pool Hoists and Assisted Bathing Equipment - Servicing and Testing

Solicitation # C487659

The Sheffield Teaching Hospitals NHS Foundation Trust is seeking a professional external supplier for the safe maintenance and servicing of patient hoists, pool hoists, and assisted bathing equipment at the Royal Hallamshire Hospital in Sheffield. This regional procurement is reserved for suppliers from South Yorkshire and is noted as being particularly suitable for small and medium-sized enterprises. The estimated total value of the contract is 110,400 pounds including VAT. The primary period of performance is estimated to run from March 2, 2027, to March 1, 2030, with a potential 1+1 extension option that could extend the contract until March 1, 2032. Award decisions will be based on the highest overall score, with evaluation weightings split between technical capabilities at 60 percent, commercial factors at 30 percent, and social value at 10 percent. Interested parties must demonstrate relevant experience, financial standing, and technical ability. Tenders must be submitted electronically via the Atamis E-Tendering Portal by the deadline of November 30, 2026, at 12:00 pm. The primary point of contact for this solicitation, numbered C487659, is Ella Gaubert.

Sheffield Teaching Hospitals NHS Foundation Trust

POSTED

about 3 hours ago

DEADLINE

Generator Monitoring Hardware Maintenance and ReplacementThis small business set-aside subcontract, managed by the Department of Defense for W6QM Micc-Ft Jackson, involves the supply, installation, and maintenance of cellular monitoring hardware for emergency generators at Fort Jackson in Columbia. The contractor is responsible for ensuring that OmniMetrix devices on 15 existing generators remain functional for cloud portal data transmission, while also providing the capacity to install up to five additional units annually. The primary objective is to deliver fully operational hardware that allows prime contractors to monitor generator status remotely. This effort falls under NAICS code 811210 and requires the contractor to perform all necessary incidental maintenance and replacements to guarantee consistent data transmission and hardware reliability.

W6QM Micc-Ft Jackson

POSTED

about 8 hours ago

DEADLINE

N.I.S.T. Traceable Calibration ServicesThis small business set-aside subcontract, issued by the Department of Defense W6QK Ccad Contr Office, requires precision calibration and certification services for Digital Torque Multipliers used by prime contractors. The selected provider must verify system stability, 100% repeatability, and an accuracy output of +/- 1% across specified temperature ranges. All work must be performed using testing rigs and standards that maintain strict traceability to the National Institute of Standards and Technology. The scope of work culminates in the delivery of formal N.I.S.T. traceable calibration certificates. Performance for this contract will take place in Corpus Christi, Texas, under NAICS code 811210. Interested parties should note the brief response window following the November 2, 2026, posting date.

W6QK Ccad Contr Office

POSTED

about 8 hours ago

DEADLINE

Repair and Overhaul of SIG Processor GroupsThis subcontract involves the repair and restoration of SIG Processor Groups, specifically NSN 5821-01-657-6453CX and 5821-01-657-6452CX, for prime contractors supporting US Air Force B-52 CONECT projects. The selected provider will utilize avionics test benches to test and certify the units to A condition, ensuring all deliverables meet strict serviceability standards. All packaging and shipping must adhere to MIL-STD-2073-1 and MIL-STD-129 requirements. The project is managed under the Department of Defense through agency FA8539 Afsc Pzaba and falls under NAICS code 811210. To qualify, contractors must maintain ISO 9001:2015 certification and demonstrate compliance with CMMC and NIST SP 800-171 security standards. The response deadline for this opportunity is February 1, 2027.

FA8539 Afsc Pzaba

POSTED

about 8 hours ago

DEADLINE

Butterfly Valve Teardown, Repair, and TestingThis subcontract involves the teardown, evaluation, repair, and modification of butterfly valves for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting valves, replacing any components that exceed repair manual limits, and conducting functional testing to achieve Ready for Issue status. The final deliverables consist of 10 repaired valves accompanied by their respective Historical Record Files. To ensure quality and precision, the contractor must utilize calibration systems that comply with ANSI/NCSL Z540.3 or ISO-10012-1 standards. Additionally, the provider is required to hold ISO 9001 or SAE AS9100 certification. This project falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

Electro-Mechanical Actuator Repair and Modification ServicesThis subcontract for Electro-Mechanical Actuator Repair and Modification Services supports Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves the complete teardown, evaluation, repair, and modification of electro-mechanical actuators to return them to full operational status. Contractors are responsible for disassembling units to identify wear and performing rigorous testing in accordance with original manufacturer specifications and drawings, utilizing specialized tooling and test equipment. Compliance is mandatory with MIL-STD-130 Rev N and requirements for Cage Codes 7AMS8, 63600, and 3B558. The primary objective is the delivery of fully repaired and tested actuators under NAICS code 811210. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Precision Composite Saw Preventative Maintenance (Labcut RTR Advanced)This subcontract, managed through the NASA Shared Services Center, involves providing scheduled preventative maintenance for the Labcut RTR Advanced precision composite saw system. The work supports prime contractors on projects at the NASA Langley Research Center in Hampton, Virginia, with the primary goal of minimizing equipment downtime and reducing the risk of system failure. The selected provider must be an authorized Extec equipment service provider to perform the work. Key deliverables for the contract include the successful execution of preventative maintenance cycles and the submission of detailed equipment health certification logs.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

MTU 20V4000 On-Site Technical Field ServicesThis subcontract, managed by the Department of Homeland Security under agency CG-SEA-C21, seeks a provider to deliver expert on-site technical field services for 20V4000M93L series engines. The scope of work involves supporting prime contractors on US Coast Guard Fast Response Cutter MTU projects through maintenance, troubleshooting, and technical assistance. Services will be performed at designated Coast Guard vessels and facilities using specialized field diagnostic tools, with deliverables consisting of technical support hours and comprehensive service reports. To be eligible, the contractor must possess MTU/RRSA Series 4000 Certification. The opportunity is categorized under NAICS code 811210. Interested parties must submit their responses by the deadline of November 16, 2026.

POSTED

about 8 hours ago

DEADLINE

MTU Engine Starter and Auxiliary Component OverhaulThis subcontract, managed by the Department of Homeland Security for the US Coast Guard FRC MTU projects, involves the inspection and overhaul of engine starters and auxiliary components. The scope of work specifically includes overhauling starters part number 2920-12-385-6651, LOP 8-06 part number 5895-12-395-9484, intercooler cores, and oil coolers. All work must be performed in accordance with Specification P-233-2039 to ensure the delivery of service-ready components. To qualify for this project, the contractor must utilize MTU/RRSA Series 4000 Certified technicians and possess the necessary electrical testing equipment. The opportunity is categorized under NAICS code 811210. Interested parties must respond by the deadline of November 16, 2026.

POSTED

about 8 hours ago

DEADLINE

MTU Series 4000 Cylinder Head Overhaul ServicesThis subcontract involves the inspection and overhaul of diesel engine cylinder heads for prime contractors supporting US Coast Guard FRC MTU projects. Specifically, the contractor is responsible for processing part number 2815-12-401-6623 in accordance with Specification P-233-2039, utilizing pressure testing equipment and precision machining to deliver service-ready components and Final Test Reports. The project is managed under the Department of Homeland Security for agency CG-SEA-C21 and falls under NAICS code 811210. To ensure technical compliance, the work must be performed by MTU/RRSA Series 4000 Certified technicians meeting CM3/CE3 lead standards. The response deadline for this opportunity is November 16, 2026.

POSTED

about 8 hours ago

DEADLINE

MTU Series 4000 Turbocharger Overhaul ServicesThis subcontract for the Department of Homeland Security involves the comprehensive overhaul of MTU turbochargers supporting US Coast Guard FRC MTU projects. The scope of work includes the opening, inspection, and complete overhaul of specific turbocharger models, including 2950-12-390-3739, 3213, 3341, and 5601, in strict accordance with Specification P-233-2039. To ensure quality and performance, the contractor must utilize genuine OEM MTU parts and specialized balancing equipment, delivering service-ready units accompanied by Final Test Reports. Strict technical qualifications are required for this engagement, mandating the use of MTU/RRSA Series 4000 Certified technicians and adherence to CM3/CE3 lead standards. The opportunity is categorized under NAICS code 811210 and is managed by agency CG-SEA-C21. Interested parties must submit their responses by the deadline of November 16, 2026.

POSTED

about 8 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

GibbsCAM Software Maintenance ProviderThis small business set-aside subcontract through the NASA Shared Services Center requires an authorized GibbsCAM support provider to deliver active maintenance subscriptions and technical support for prime contractors. The scope of work focuses on providing prorated software maintenance and the co-terming of all existing agreements to a unified end date of November 7, 2026. Classified under NAICS code 541519, the contract ensures that critical software licenses remain current and supported. Interested parties must meet the specific authorization requirements to provide official GibbsCAM support to maintain operational continuity for the agency's projects.

Other Computer Related Services

POSTED

about 8 hours ago

DEADLINE

GibbsCAM Software License and Upgrade SupplierThis small business set-aside subcontract through the NASA Shared Services Center provides proprietary GibbsCAM software licenses and upgrades for prime contractors supporting the Kennedy Space Center Launch Equipment Shop. The scope of work includes the provision of GO Pro Mill and Turn packages, along with upgrades to Pro Milling and Turning add-ons. To ensure the delivery of authentic OEM licenses for VoluMill and VoluTurn Solids, the supplier must maintain authorized reseller status. The selected vendor is responsible for delivering valid software license keys and submitting completed NASA Entitlement Reporting Forms. This procurement falls under NAICS code 423430 and is specifically designed to support critical launch equipment operations through specialized CAM software capabilities.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

KSC GibbsCAM Software Licenses

Solicitation # 80NSSC26948351Q

Solicitation 80NSSC26948351Q is a small business set-aside issued by the NASA Shared Services Center for the procurement of GibbsCAM computer-aided manufacturing software licenses and upgrades for the Kennedy Space Center Launch Equipment Shop. The requirement includes three GO Pro Mill and Turn packages, one upgrade from GO Milling to Pro Milling, three upgrades from GO Solids Milling to Pro Milling, and five Upgrade Mill Add-ons to Turning. All licenses include prorated maintenance co-termed through November 7, 2026. The software must support specific lathe specifications, including one turret, up to two spindles, live tooling, and C- and Y-axis capabilities. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, where offerors must demonstrate technical acceptability by meeting all solicitation requirements. Delivery is specified as FOB Destination to Kennedy Space Center, Florida, with a delivery schedule of 1 to 15 business days after receipt of order. Quotes are due by November 6, 2026, and must be submitted to McKenzie Hanson. This procurement falls under NAICS code 513210 and incorporates various FAR and NASA-specific clauses, including deviations regarding commercial products, sustainable products, and the reporting of entitlement data via the SLAM NASA Entitlement Reporting Form.

Software Publishers

POSTED

about 8 hours ago

DEADLINE

C-B and RF Amplifiers and Switches

Solicitation # 80NSSC946679Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for a small business set-aside procurement of C-Band RF Amplifiers and Switches under NAICS 334220. This brand name or equal to requirement specifies the procurement of four Pasternack PE15A4042 Medium Power Broadband Amplifiers and six Pasternack PE71S5003 High-Isolation PIN Diode Switches. The contract is a firm-fixed-price agreement with delivery required by December 18, 2026, to the NASA Glenn Research Center in Cleveland, Ohio, under FOB Destination terms. Award will be based on the lowest price technically acceptable offer. Interested vendors must submit their quotes to Laura Quave by November 4, 2026, ensuring the Notice ID 80NSSC27946679Q is included in the subject line. Required quote elements include the vendor's Cage Code, UEI number, ARO lead time, applicable shipping costs, and any available discounts, with payment terms set at Net 30. The government will not utilize credit cards for payment. Additionally, offerors must be registered in the System for Award Management and adhere to specific packaging and marking requirements for duty-free entry if applicable.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Universal Robotics UR30 Robot Workstation and Console

Solicitation # 80NSSC27945558Q

Solicitation 80NSSC27945558Q is a brand-name requirement issued by the NASA Shared Services Center for the procurement of a Universal Robotics UR30 Robot Workstation and Console. The equipment is intended for use at the Marshall Space Flight Center (MSFC) to ensure interoperability and platform consistency with existing robotic systems. The procurement includes a UR30 robot, Robotiq gripper kits, an Advantech TPC-B520 PC with specific technical configurations, a mobile base kit, and various electrical and pneumatic components. The contract is being competed as full and open under NAICS 333998, with the award based on the lowest price technically acceptable (LPTA) offer. Key deliverables include the delivery of hardware FOB Destination within 90 days after receipt of order, which must include 20 hours of workstation assembly completed prior to shipment. Additionally, the contractor must provide five consecutive 8-hour days of on-site applications engineering at MSFC Building 4475, to be scheduled within 30 days of delivery. Final acceptance is contingent upon the completion of this on-site engineering. Vendors must be registered in SAM, provide proof of manufacturer pricing, and confirm authorization to resell the specified items. Payments will be made via the Invoice Processing Platform (IPP) on Net 30 terms, and credit card payments will not be accepted.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

EXperTEC 1 YEAR ANNUAL SERVICE CONTRACT F/LABCUT 5000 50484

Solicitation # 80NSSC27948601

The NASA Shared Services Center is seeking a one-year annual service contract for the maintenance of an Extec Labcut 5000 Series Advanced Precision Composite Plate Saw, located at the Langley Research Center in Hampton, Virginia. This procurement is designated as a sole source requirement under FAR 12.102(a), as Excel Technologies, Inc. has been identified as the exclusive provider of compatible and authorized maintenance services for this specific equipment. The primary objective of the contract is to ensure operational readiness, sustain equipment performance, and minimize unplanned breakdowns that could impact mission-critical manufacturing operations. The scope of work includes two primary line items: a one-year annual service contract for the Labcut 5000 and a one-year annual preventative maintenance contract for the Labcut RTR Advanced. The period of performance is estimated as one year after receipt of order. This acquisition follows FAR Part 12 for commercial items and services and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman. Procurement is managed by Shanna Patterson and Morgan Mitchell, with a response deadline for capability statements set for November 5, 2026. The applicable NAICS code for this effort is 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

Locking USB 3.0 Cable AssemblyThis subcontract involves the supply of specialized high-speed USB 3.0 cables for prime contractors supporting imaging projects at the NASA Shared Services Center. The required hardware, identified as CBL-U3-3M0, consists of 3.0m cables featuring micro-B connectors and integrated locking-thumbscrew mechanisms designed to ensure stability and prevent accidental disconnection caused by strain or vibration. All provided assemblies must strictly adhere to USB 3.0 data transfer specifications to maintain performance standards. The opportunity is categorized under NAICS code 335921 and was posted on October 30, 2026, with a response deadline of November 4, 2026.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Ruggedized Transport Case SupplyThis subcontract opportunity through the NASA Shared Services Center involves the supply of ruggedized transport cases for prime contractors working on imaging projects. The requirement specifies hard-shell PELI brand or equivalent cases equipped with custom foam inserts designed to secure sensitive scientific equipment, including cameras, lenses, and tripods. All provided cases must adhere to strict ruggedization standards to ensure the safe transport of high-value gear. The solicitation was posted on October 30, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 326199, this contract focuses on the delivery of specialized protective housing to support National Aeronautics And Space Administration operations.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

VIS/NIR Hyperspectral Lens SupplyThis subcontract for the NASA Shared Services Center involves the supply of specialized 35 mm focal length lenses intended for prime contractors working on imaging projects. The scope of work requires precision grinding and coating of optical glass to maintain high transparency and performance across the 460 to 960 nm spectrum, covering both visible and near-infrared bands. To ensure operational integration, all delivered lenses must be fully compatible with the xiSpec camera mounting interface. The procurement falls under NAICS code 334310 and is focused on the delivery of high-performance VIS/NIR hyperspectral lenses.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

CMOSIS CMV2000 Image Sensor SupplyThis subcontract involves the manufacture and supply of high-performance CMOS image sensors to prime contractors supporting NASA Shared Services Center imaging projects. The scope of work specifically requires the delivery of CMOSIS CMV2000 global shutter CMOS sensors, which must be capable of supporting snapshot mosaic hyperspectral imaging and strictly adhere to IMEC snapshot mosaic specifications. The procurement is categorized under NAICS code 334413 and is managed by the National Aeronautics And Space Administration. Interested parties should note the response deadline of November 4, 2026, for this specialized hardware requirement.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Corporate 1000 Card Format ProgrammingThis small business set-aside subcontract involves specialized programming of 10,000 Corporate 1000 card formats for prime contractors supporting the NASA Shared Services Center. The project requires the delivery of programmed units that maintain serialized numbering sequences and adhere to specific site identification requirements established by the Langley Research Center in Hampton, Virginia. To execute this work, the contractor must possess manufacturer authorization and utilize proprietary programming tools from HID Global. The contract falls under NAICS code 541519 and is managed through the National Aeronautics And Space Administration.

Other Computer Related Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS