Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Precision Fastener Manufacturing – Flat Washers

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 7 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7M0-27-T-0724
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-7135
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
NAICS: 332312
New
SLED
Tunnel Liner Plate Material Supplier
Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

about 15 hours ago

DEADLINE

in 13 days
NAICS: 332312
New
Federal
Integrated Water Tank and Storage FabricationThis subcontract involves the fabrication and supply of integrated water tank and fuel storage assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of an insulated potable water tank with a minimum capacity of 80 gallons, featuring an integrated storage rack capable of holding at least five 5-gallon fuel cans. The selected provider is responsible for the delivery of the fully installed assembly. The project is categorized under NAICS code 332312 and will be performed in Natick. Interested parties must adhere to the response deadline of November 4, 2026. This effort is managed under the Department of Defense for the DLA Troop Support agency.
DLA Troop Support

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 332312
New
Federal
Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.
W6QK Acc-Apg

POSTED

about 18 hours ago

DEADLINE

in 28 days
NAICS: 332312
New
Federal
Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1
Solicitation # W9123727QA011
Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.
W072 Endist Huntington

POSTED

about 18 hours ago

DEADLINE

in about 14 hours
NAICS: 332312
New
DIBBS
17--HANDRAIL
Solicitation # SPE8EF-27-T-0145
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
Federal
Environmental Control Work Booth/ Sanding Booth.
Solicitation # FA480027Q0005
FA4800 633 Cons Pkp

POSTED

about 18 hours ago

DEADLINE

in 17 days
NAICS: 332312
New
Federal
Purchase of 2 or 3 Temporary Road Bridges
Solicitation # 12444627Q0004
Csa East 7 Usda-Fs

POSTED

about 18 hours ago

DEADLINE

in 14 days
NAICS: 332312
New
SLED
Steel Embedded Items and Lintel SupplyThis subcontract for Steel Embedded Items and Lintel Supply involves providing essential steel components for Harford County Public Schools facility projects. The selected vendor will be responsible for furnishing and delivering anchor bolts, leveling plates, steel lintels, base plates, bearing plates, sleeves, angles, and channels directly to the jobsite. All supplied materials must strictly comply with the Buy American Steel Act, and the scope of work is limited to supply and delivery, as installation will be handled by other trades. The opportunity is categorized under NAICS code 332312 and is managed by the state of Maryland. Interested parties should note the tight response window, with the solicitation posted on October 26, 2026, and the deadline for responses set for October 29, 2026.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 1 day
NAICS: 332312
New
SLED
Miscellaneous Metals and StairsThis subcontract for Miscellaneous Metals and Stairs involves the fabrication and installation of secondary metal elements for prime contractors working on Harford County Public Schools facility projects. The scope of work specifically includes the delivery and installation of metal pan stairs, grating stairs, interior and exterior pipe and tube railings, and various miscellaneous metal supports. A critical requirement for this contract is the provision of a Maryland Professional Engineer for the delegated design of all stairs, handrails, ladders, and guardrails. Interested parties should note the response deadline of October 29, 2026, for this Maryland-based project.
Harford County Public Schools

POSTED

1 day ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The contract mandates the manufacture and supply of flat washers adhering strictly to military specifications, covering precise dimensional tolerances, approved material compositions, and designated surface finishes. All products must comply with the DLA Master List and be produced under zero-defect sampling plans to ensure absolute quality and reliability for defense applications. The work is targeted toward Hill Air Force Base, Utah, with a delivery and compliance deadline set for August 17, 2026. This is a subcontract opportunity under NAICS code 332312, issued by the ASC Commodities Division of the Department of Defense, focusing on high-integrity fastener production for critical military systems.

General Info

Manufacture and supply military-spec flat washers for Hill AFB, due August 17, 2026, under zero-defect standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

HILL AFB, UT, 84056-5713, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-14QH.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, FLAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture and supply of flat washers per military specifications including dimensional tolerances, material composition, and finish. Must comply with DLA Master List and zero-defect sampling plans.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
Supply of Stainless Steel CRES 302 Lock WashersThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 91 internal and external tooth lock washers under NSN 5310012533723. The components must be fabricated from Stainless Steel CRES 302 using stamping or precision machining to meet strict dimensional tolerances for inner diameter, outer diameter, and thickness. All deliverables must be provided in RP001 compliant packaging. The performance of this contract takes place in New Cumberland, Pennsylvania, under NAICS code 332722. To ensure security and regulatory compliance, the provider must adhere to NIST SP 800-171 and DFARS 252.204-7012 standards. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 339993
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305017240472)This subcontract involves the supply of three Hexagon Head Cap Screws under NSN 5305017240472 for the Department of Defense, specifically supporting the ASC Commodities Division and DLA Aviation. The contractor is responsible for sourcing or manufacturing the fasteners in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001) and ensuring all items are packaged and marked according to MIL-STD-129 standards. The performance of this contract takes place in Mechanicsburg, Pennsylvania, under NAICS code 339993. The solicitation was posted on October 23, 2026, with a response deadline set for October 28, 2026.
Fastener, Button, Needle, and Pin Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 423610
New
DIBBS
Supply of Mil-Spec Electrical Components for Power Cable AssemblyThis subcontract involves the supply of high-reliability electrical components, including raw materials, connectors, and mil-spec wiring, for prime contractors working on DLA Aviation ASC projects. The provider is responsible for sourcing materials that strictly adhere to the specifications of six reference drawings, ranging from Revisions B through F, and must provide a certification of conformance for all delivered items. Performance of the contract takes place in Anniston, Alabama, under the oversight of the Department of Defense ASC Commodities Division. The scope of work includes the delivery of specialized shielding and electrical components while maintaining strict compliance with ITAR and EAR export controls for restricted materials. Classified under NAICS code 423610, the agreement ensures that all components meet rigorous military specifications required for power cable assembly.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 334418
New
DIBBS
Custom Electrical Power Cable Assembly FabricationThis subcontract involves the fabrication of a custom electrical power cable assembly, identified by NSN 6150-01-650-4164, for the Department of Defense ASC Commodities Division. The manufacturer is responsible for producing the assembly based on six specific reference drawings, utilizing zero-based sampling plans to ensure quality. All deliverables must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. Performance will take place in Anniston, Alabama, under NAICS code 334418. Due to the nature of the technical data involved, the contractor must maintain ITAR and EAR controls and hold CMMC Level 2 certification. The project requires the delivery of one completed power cable assembly to support prime contractors on DLA Aviation ASC projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332722
New
DIBBS
CRES 302 Lock Washer SupplyThis subcontract involves the supply of 1,083 internal and external tooth lock washers for prime contractors supporting the Department of Defense ASC Commodities Division. The components must be manufactured or sourced from CRES 302 stainless steel in strict accordance with MS 45904-86 and ASME B18.21.1 standards. Performance of the contract requires rigorous dimensional and material testing, supported by full traceability and detailed inspection records. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. A critical administrative requirement for the provider is maintaining cybersecurity compliance as outlined in NIST SP 800-171. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 334419
New
DIBBS
Manufacture and Supply of Conductor Bus (Part No. 426048-1)This subcontract with the Department of Defense ASC Commodities Division requires the manufacture and supply of 18 conductor bus units, part number 426048-1. The contractor must fabricate these units in strict accordance with Basic Drawing NR 80020 426048, Revision A, ensuring all items meet Critical Application Item quality and dimensional specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334419. Each unit must be marked with the contract number, NAWC CAGE, and part number in compliance with MIL-STD-129, while packaging must adhere to MIL-STD-2073-1E. The final deliverable consists of 18 finished and packaged conductor bus units intended for prime contractors delivering DLA supply contracts.
Other Electronic Component Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332722
New
DIBBS
Manufacture and Supply of Threaded Pin-Rivets (NSN 5320013656361)This subcontract through the Department of Defense ASC Commodities Division involves the manufacture and supply of threaded pin-rivets under NSN 5320013656361. The contractor is responsible for fabricating 16 units using casting or forging processes and specialized tooling, ensuring that no mercury compounds are added to the components. The project requires the delivery of the finished rivets along with a complete technical data package for government evaluation. Performance of the contract must adhere to strict regulatory and technical standards, including NIST SP 800-171, ASTM D3951, RP001, and MIL-STD-129. The work is designated under NAICS code 332722 and will be performed in New Cumberland. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332510
New
DIBBS
Manufacture and Supply of Straight Headle PinsThis subcontract through the Department of Defense ASC Commodities Division involves the manufacture and supply of 15 precision-machined straight headle pins. The components must be fabricated according to NSN 5315014766144 and Electric Boat Corporation part number 36-01-7808, with all materials remaining compliant with DFARS 252.225-7001. Strict quality and logistics standards are required for this order, including sampling per MIL-STD-1916 or ASQ H1331, packaging per MIL-STD-2073-1E, and marking per MIL-STD-129. The work falls under NAICS code 332510 and is to be performed in New Cumberland, Pennsylvania.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 335931
New
DIBBS
Electrical Insulation Sleeving Supplier (NSN 5970010135833)This subcontract through the Department of Defense ASC Commodities Division requires the manufacture or distribution of specialized electrical insulation sleeving for prime contractors. The supplier must provide 1,000 feet of NSN 5970010135833 sleeving that adheres to SAE AS23053/10B and SAE AS23053C standards. All items must undergo physical identification and bare item marking in accordance with RQ017. To be eligible, the contractor must hold PRI QML or QPL accreditation and submit Source Approval Request documentation per RC001. The place of performance is located at JBER, zip code 99506-4406. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026, under NAICS code 335931.
Current-Carrying Wiring Device Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-36CV
Solicitation SPE4A6-26-T-36CV is a federal procurement issued by the DLA Aviation ASC Commodities Division for the supply of 17 machine bolts, identified by NSN 5306-01-593-2773 and part number AAST3118-1.00HH. The contract requires delivery to DLA Dist San Joaquin in Tracy, California, with a need ship date of February 7, 2027, and an original required delivery date of March 23, 2027. The delivery terms are FOB Origin, and the quantity variance is strictly set at plus or minus 0 percent. Quality assurance is governed by a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and RP001, while all marking and labeling must adhere to MIL-STD-129. The procurement is categorized under NAICS code 332722 and incorporates several critical regulatory requirements, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A6-26-T-40D5
Solicitation SPE4A6-26-T-40D5 is a fixed-price procurement issued by the Defense Logistics Agency for 91 internal and external tooth lock washers, identified by NSN 5310012533723. The required components must be manufactured from Stainless Steel CRES 302 and adhere to technical specifications FF-W-100 Type 3 Style 1 and FF-W-100C(1). Dimensional requirements are governed by MS 45904-86 or ASME B18.21.1, with specific tolerances for the inner diameter (.512 to .530 inches), outer diameter (1.380 to 1.410 inches), and thickness (.052 to .060 inches). The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania by November 27, 2026, with a delivery window of 202 days after order. Quality assurance and inspection will occur at the point of origin, requiring compliance with MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4, with a zero-nonconformance acceptance policy. Packaging must follow RP001 and ASTM D3951, while marking and labeling must comply with MIL-STD-129 and MIL-STD-130N. Item Unique Identification is not required. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and safeguarding requirements for covered defense information under NIST SP 800-171. Payment processing is mandated through the Wide Area Workflow system. This is not a small business set-aside, and it falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-28C7
Solicitation SPE4A6-26-T-28C7 is issued by the Defense Logistics Agency (DLA) for the procurement of 16 threaded pin-rivets under NSN 5320-01-365-6361. The requirement is not a small business set-aside and falls under NAICS code 332510. Delivery is required within 171 days after receipt of order, with the place of performance and delivery located in New Cumberland, Pennsylvania. The contract is issued under the First Destination Transportation program with FOB Origin terms, and both inspection and acceptance will occur at the destination. Manufacturing may require specific casting or forging processes and special tooling, for which the government may not provide. Offerors must provide a complete data package for approved or alternate parts and ensure that mercury or mercury-containing compounds are not intentionally added. Compliance with NIST SP 800-171 is required for eligible offerors, and a current assessment must be posted in the Supplier Performance Risk System. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in about 11 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
DIBBS
Supply of Metal Unit Containers and Intermediate Packaging
ACTIVE DEVICES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Precision Manufacturing of Critical Application Knob
LAND SUPPLY CHAIN

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
PIN-RIVET Supply and Delivery
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Aircraft Access Door Components (NSN 1560-00-262-4524)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Manufacture of Vehicle Hatch/Door Assemblies
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Structural Steel Fabrication and Erection
FLUID HANDLING DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Supply of Bridging Deck Units (Military-Grade)
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-631T
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
Federal
Fabrication of Spreader Lifting Weldment
Nswc Crane

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
Closed
DIBBS
Structural Steel Fabrication and Erection
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 332312
DIBBS
COTS Hardware Supply – Angle Bracket
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332312
DIBBS
Precision Machining of Structural Fittings
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS