Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Fastener Manufacturing – Machine Screws

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of 50 units of BACS12CK3-10 machine screws adhering strictly to DLA technical specifications, material standards, and quality requirements. These fasteners must meet exacting performance and dimensional criteria to ensure compatibility and reliability in defense applications. The work is to be performed for the ASC COMMODITIES DIVISION under the Department of Defense with performance designated at TINKER AFB, ZIP 73145-8000. This is a subcontract opportunity classified under NAICS code 332112, which pertains to screw, nail, and pin manufacturing. The solicitation was posted on August 9, 2026, with a firm response deadline of August 17, 2026, at 5:00 PM Eastern Time. All proposals must demonstrate full compliance with the defined technical and quality controls and be submitted through the designated DIBBS platform.

General Info

Manufacture and deliver 50 BACS12CK3-10 screws to DOD specs at Tinker AFB by August 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 50 units of BACS12CK3-10 machine screws compliant with DLA technical specifications, material standards, and quality requirements.

Similar Contracts

Same NAICS industry code

Electrical Connector Supply (MIL-DTL-38999N Compliant)

ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

Copper Alloy Metal Bar SupplyThe contract calls for the supply and delivery of 108 feet of copper alloy 630 metal bar, with a tolerance of plus or minus 10 percent, ensuring the final quantity falls within an acceptable range. The bar must have a diameter of 1.375 inches and be finished using both hot and cold processes to meet the precise requirements of the SAE AMS4640J specification. All materials must be properly packaged and clearly marked in accordance with federal shipping standards to ensure safe and traceable transport. The delivery destination is DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002 specified as the place of performance. The material is classified under NAICS code 332112, indicating it falls within the forgings and stampings manufacturing sector, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing vendors a 11-day window to submit proposals.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Electrical Connectors (Cable Clamps)The contract requires the manufacture and supply of 198 units of a critical application electrical cable clamp identified by NSN 5935011035835, to be produced in strict compliance with military technical drawings and specifications. The item is a precision electrical connector essential for operational readiness, and all units must meet rigorous quality and performance standards expected in defense applications. Production must be completed and delivered to the designated place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, ensuring full alignment with military logistics and deployment protocols. This is a subcontract solicitation issued under NAICS code 332112, which classifies it within the Electrical Equipment and Wiring Fixture Manufacturing sector, and is managed by the Active Devices Division of the Department of Defense. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, providing potential contractors a limited window to submit proposals. While no set-aside type is specified, the contract is part of a broader DoD procurement effort focused on secure, reliable component supply chains. Interested parties must access the official solicitation through the DIBBS platform using the provided UI link to obtain complete technical documentation and submission guidelines.

ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Mounting BracketsThe contract calls for the manufacture of 84 precision mounting brackets meeting military specifications identified by NSN 5340-01-010-0000, encompassing full production from material sourcing through CNC machining, surface finishing, and rigorous quality inspection to ensure compliance with defense standards. All work must be performed to exacting technical requirements, with final products verified for dimensional accuracy, material integrity, and functional readiness for military use. The solicitation is classified as a subcontract under NAICS code 332112, indicating a focus on forging and stamping operations with precision machining components. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 20, 2026, and the posting date was August 9, 2026. The contracting agency is the Department of Defense through its LAND SUPPLY CHAIN division, and the work is intended to support critical logistics and equipment assembly within the defense supply chain. All deliverables must adhere to the specified military standard without deviation, and the contract is actively open for qualified subcontractors to submit proposals.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Precision Metal Bar Manufacturing – Nickel Alloy 400 Hexagon BarsThe contract requires the precise manufacture of cold-drawn hexagonal bars from nickel alloy 400, tailored to strict dimensional and material standards for integration into defense supply chain applications. Production must adhere to certified metallurgical properties and geometric tolerances to ensure performance in high-stakes military environments, with delivery targeted to the specified location in New Cumberland, Pennsylvania, under a subcontract arrangement. All manufacturing activities must meet federal defense procurement requirements, aligned with NAICS code 332112 for forged and stamped metal manufacturing, and the response deadline is set for August 20, 2026. The solicitation is managed by the Department of Defense under the Construction & Equipment MRO SVC I office, with no set-aside provisions specified, indicating open competition among qualified suppliers capable of fulfilling the technical and logistical demands of defense-grade material production.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

Manufacture and Delivery of Helical Compression SpringsThe contract requires the precision manufacturing, quality assurance, packaging, and delivery of 58 helical compression springs with the National Stock Number 5360-00-514-4470, fully compliant with military specifications including MIL-STD-2073-1E and all Defense Logistics Agency requirements. The work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and performance under operational conditions typical of defense applications. Packaging must meet stringent military packaging guidelines to safeguard the springs during transit and storage, and delivery must be coordinated to meet the specified timeline and location requirements. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the place of performance designated as Greensboro, North Carolina, 27409. It was posted on August 9, 2026, and responses are due by August 20, 2026. The North American Industry Classification System code 332112 indicates the work falls under spring manufacturing. The solicitation is identified by the reference number SPE7MC26T186M, and all deliverables must be submitted in full compliance with DLA’s procedural and technical directives to ensure acceptance and payment.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2047

This procurement specifies copper alloy bar stock in hexagonal shape with a width of 1.000 inch across flats, manufactured to H04 temper and designated by part number 482, with a reference weight of 3.160 pounds per foot and lengths between 6 and 14 feet, delivered in whole-foot increments only. The material must conform to ASTM B21/B21M-20 and ASTM B249/B249M-23 standards and require a Certificate of Quality Compliance with each shipment, including mill material certification to be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be stamped or stenciled in legible, waterproof, and durable characters that do not contaminate the material, with adhesive labels acceptable for smaller diameter bars. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods following ASTM B900 and marking consistent with MIL-STD-129R, including special designations for unique requirements. The contract enforces strict adherence to the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official DLA Troop Support QSLD to receive awards; deviations must be explicitly declared, and non-compliant bids are subject to rejection and potential criminal penalties. Source inspection requirements are waived for qualified suppliers under this solicitation, relieving them from COQC, PVT, QAP-EQ003, and ASQ H1331 obligations. The product must meet all dimensional, temper, and alloy specifications as defined in the Technical Data Package revisions referencing ASTM and SAE standards. Shipment is to be delivered FOB origin to the designated DLA warehouse in Tracy, California, with a delivery window of 164 days from the original required delivery date of December 5, 2026, and a quantity allowance of plus or minus 10 percent. The contract requires full compliance with all CDRLs including CDRL-METALSCERT, and all documentation must reference the correct NSN 9530001671901 and Purchase Request 701775

DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2059

The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2065

This contract specifies the procurement of aluminum alloy 2024 in T851 temper, supplied as round drawn bars with a diameter of 6.500 inches and lengths between 10 and 12 feet, delivered in whole-foot increments only, with a reference weight of 38.983 pounds per foot. The material must fully comply with SAE AMS-QQ-A-225/6B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, and is designated as a critical application item requiring strict conformance. Each unit must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling without contamination or degradation of the material. Adhesive labels are required for small-diameter bars, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including preservation methods per ASTM B660 and marking per MIL-STD-129R with the special code ZZ. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant bids must explicitly state the deviation. Products delivered under this contract must be sourced exclusively from QSLD-approved distributors unless otherwise authorized in writing by the government; unauthorized substitutions may result in criminal penalties. Certificate of Quality Compliance with mill material certification is mandatory with each shipment and must be forwarded to the DLA Troop Support Contracting Officer. The contract waives source inspection requirements for QSLD-compliant suppliers, except for Foreign Military Sales, and supersedes other quality conformance inspection clauses. Deliveries are FOB origin, with a 20-foot quantity allowable within ±10% variance, inspection and acceptance occurring at destination, and delivery required within 164 days of contract award, with a scheduled need date of February 1, 2027. All shipments must be addressed to DLA Distribution Warner Robins at Robins AFB, Georgia, in compliance with DLA procurement notes and transportation guidelines, and include dual-unit markings if applicable.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-14PR

The contract pertains to the procurement of 194 machine bolts with NSN 5306-00-069-3019 under solicitation SPE4A6-26-T-14PR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days after award, and the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The item is procured as fully competitive in accordance with applicable military or federal specifications, and the technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance will occur at the origin, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but individual item unique identification is not mandated per the Service customer’s request, consistent with DFARS 252.211-7003(c)(1)(i). Measuring and test equipment standards must be adhered to, and the NAICS code 332112 designates the industrial classification for this procurement. All inquiries should be directed to Priscilla Holmes at the provided contact information.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7MC-26-T-186M

The contract pertains to the procurement of 58 helical compression springs identified by NSN 5360-00-514-4470, issued under solicitation SPE7MC-26-T-186M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and delivery is required within 165 days after award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All supplies must comply with strict prohibitions on mercury and mercury-containing compounds, which cannot be intentionally added or come in direct contact with the hardware, except for specific approved uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and performance is to occur in Greensboro, North Carolina, with primary point of contact Nicole Betts reachable via email and phone provided.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-5116

The contract pertains to the procurement of three air filter elements with NSN 4130-01-560-6308 and part number CC-3000-CVN-77, supplied by EDDY PUMP CORPORATION under solicitation SPE8E8-26-T-5116. Delivery is required within 20 days of award, FOB destination, with no tolerance for quantity variance. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and dual containment per NAVSEA 5100-003D. Packaging must mark and label in accordance with DLA standards using the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere to DLA procurement protocols. Shipment must bypass parcel post and use the fastest traceable transport method to the vessel delivery address for USS SAN DIEGO LPD 22, with tracking reference RDD 777 and transporter details provided. The required delivery date is April 17, 2025, and the contract mandates strict adherence to defense information handling protocols and government-only access codes.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE