Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, COMPRES

Active
SPE7MC-26-T-186MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 58 helical compression springs identified by NSN 5360-00-514-4470, issued under solicitation SPE7MC-26-T-186M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and delivery is required within 165 days after award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All supplies must comply with strict prohibitions on mercury and mercury-containing compounds, which cannot be intentionally added or come in direct contact with the hardware, except for specific approved uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and performance is to occur in Greensboro, North Carolina, with primary point of contact Nicole Betts reachable via email and phone provided.

General Info

Procurement of 58 helical springs under DLA solicitation, delivery in 165 days, mercury restrictions apply, Greensboro, NC delivery.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

6920 WEST MARKET STREET, GREENSBORO, NC, 27409, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-186M for Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Nicole Betts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMPRESSION
SPRING, HELICAL, COMPRESSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5360-00-514-4470 Quantity: 58 EA Purchase Request: 7017778732QTY: 58 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Copper Alloy Metal Bar SupplyThe contract calls for the supply and delivery of 108 feet of copper alloy 630 metal bar, with a tolerance of plus or minus 10 percent, ensuring the final quantity falls within an acceptable range. The bar must have a diameter of 1.375 inches and be finished using both hot and cold processes to meet the precise requirements of the SAE AMS4640J specification. All materials must be properly packaged and clearly marked in accordance with federal shipping standards to ensure safe and traceable transport. The delivery destination is DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002 specified as the place of performance. The material is classified under NAICS code 332112, indicating it falls within the forgings and stampings manufacturing sector, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing vendors a 11-day window to submit proposals.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2047
This procurement specifies copper alloy bar stock in hexagonal shape with a width of 1.000 inch across flats, manufactured to H04 temper and designated by part number 482, with a reference weight of 3.160 pounds per foot and lengths between 6 and 14 feet, delivered in whole-foot increments only. The material must conform to ASTM B21/B21M-20 and ASTM B249/B249M-23 standards and require a Certificate of Quality Compliance with each shipment, including mill material certification to be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be stamped or stenciled in legible, waterproof, and durable characters that do not contaminate the material, with adhesive labels acceptable for smaller diameter bars. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods following ASTM B900 and marking consistent with MIL-STD-129R, including special designations for unique requirements. The contract enforces strict adherence to the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official DLA Troop Support QSLD to receive awards; deviations must be explicitly declared, and non-compliant bids are subject to rejection and potential criminal penalties. Source inspection requirements are waived for qualified suppliers under this solicitation, relieving them from COQC, PVT, QAP-EQ003, and ASQ H1331 obligations. The product must meet all dimensional, temper, and alloy specifications as defined in the Technical Data Package revisions referencing ASTM and SAE standards. Shipment is to be delivered FOB origin to the designated DLA warehouse in Tracy, California, with a delivery window of 164 days from the original required delivery date of December 5, 2026, and a quantity allowance of plus or minus 10 percent. The contract requires full compliance with all CDRLs including CDRL-METALSCERT, and all documentation must reference the correct NSN 9530001671901 and Purchase Request 701775
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2059
The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2065
This contract specifies the procurement of aluminum alloy 2024 in T851 temper, supplied as round drawn bars with a diameter of 6.500 inches and lengths between 10 and 12 feet, delivered in whole-foot increments only, with a reference weight of 38.983 pounds per foot. The material must fully comply with SAE AMS-QQ-A-225/6B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, and is designated as a critical application item requiring strict conformance. Each unit must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling without contamination or degradation of the material. Adhesive labels are required for small-diameter bars, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including preservation methods per ASTM B660 and marking per MIL-STD-129R with the special code ZZ. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant bids must explicitly state the deviation. Products delivered under this contract must be sourced exclusively from QSLD-approved distributors unless otherwise authorized in writing by the government; unauthorized substitutions may result in criminal penalties. Certificate of Quality Compliance with mill material certification is mandatory with each shipment and must be forwarded to the DLA Troop Support Contracting Officer. The contract waives source inspection requirements for QSLD-compliant suppliers, except for Foreign Military Sales, and supersedes other quality conformance inspection clauses. Deliveries are FOB origin, with a 20-foot quantity allowable within ±10% variance, inspection and acceptance occurring at destination, and delivery required within 164 days of contract award, with a scheduled need date of February 1, 2027. All shipments must be addressed to DLA Distribution Warner Robins at Robins AFB, Georgia, in compliance with DLA procurement notes and transportation guidelines, and include dual-unit markings if applicable.
WARNER ROBINS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-14PR
The contract pertains to the procurement of 194 machine bolts with NSN 5306-00-069-3019 under solicitation SPE4A6-26-T-14PR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days after award, and the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The item is procured as fully competitive in accordance with applicable military or federal specifications, and the technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance will occur at the origin, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but individual item unique identification is not mandated per the Service customer’s request, consistent with DFARS 252.211-7003(c)(1)(i). Measuring and test equipment standards must be adhered to, and the NAICS code 332112 designates the industrial classification for this procurement. All inquiries should be directed to Priscilla Holmes at the provided contact information.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-5116
The contract pertains to the procurement of three air filter elements with NSN 4130-01-560-6308 and part number CC-3000-CVN-77, supplied by EDDY PUMP CORPORATION under solicitation SPE8E8-26-T-5116. Delivery is required within 20 days of award, FOB destination, with no tolerance for quantity variance. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and dual containment per NAVSEA 5100-003D. Packaging must mark and label in accordance with DLA standards using the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere to DLA procurement protocols. Shipment must bypass parcel post and use the fastest traceable transport method to the vessel delivery address for USS SAN DIEGO LPD 22, with tracking reference RDD 777 and transporter details provided. The required delivery date is April 17, 2025, and the contract mandates strict adherence to defense information handling protocols and government-only access codes.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3404
This contract specifications call for nickel alloy 400 metal bars, cold drawn and shaped in a hexagon with a width of 0.750 inches across flats, offered in whole-foot lengths ranging from 6 to 20 feet, with a linear weight of 1.870 pounds per foot. The material must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including the applicable specification SPE8E9-26-T-3404, Section B, and must be accompanied by a Certificate of Quality Compliance with every shipment, submitted both to the receiving depot and to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and dimensions, using approved methods such as stenciling or stamping that do not contaminate or impair the product. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire, with noncompliance constituting grounds for rejection. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared. The government waives source inspection requirements for QSL-compliant suppliers, eliminating the need for COQC, PVT, QAP-EQ003, and ASQ H1331 inspections. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation methods following ASTM A700 and marking requirements complying with MIL-STD-129, including the use of special codes Z and ZZ for preservation and labeling. Vinyl or plastic-coated pressure-sensitive labels are permitted for structural shapes and banded lifts, and shipment markings must display both units of measure if applicable. The contract is for 37 feet of material at $37.00 per foot, with a total price of $1,369, delivery FOB origin, inspection and acceptance at destination, and a required delivery date of February 1, 2027, with a 10 percent quantity variance allowed. The material is designated as a critical application item, and all documentation including the Technical Data Package and CDRL-METALSCERT must be furnished in accordance with referenced standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-398X
The contract is for the procurement of 198 electrical cable clamps identified by NSN 5935-01-103-5835 under solicitation SPE7M5-26-T-398X, issued by the Department of Defense’s Active Devices Division. The item must be delivered within 105 days of award, with performance taking place in New Cumberland, Pennsylvania. All pricing must include data required by the DLA packaging requirements, and suppliers are obligated to provide one Certificate of Quality Compliance per manufacturing lot, aligned with the Supplemental Quality Assurance Provision. Each certificate must accompany the shipment and be made available for Government inspection at the time of delivery if the contract is under Government inspection at source. Suppliers must electronically upload each COQC into the iRAPT system as an attachment to the Receiving Report for Government records, and the Government representative may approve the receiving report via WAWF once documentation is properly submitted and verified. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 332112, and primary point of contact is Tate Shannon at the provided DLA email and phone number.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-398W
The contract is for the procurement of 195 electrical plug connectors with NSN/Part Number 5935-01-008-2404, issued under solicitation SPE7M5-26-T-398W by the Department of Defense’s Active Devices Division. All items must be manufactured by an approved source using materials explicitly cited on the referenced drawing, and quotes must strictly adhere to these specifications. The delivery timeline requires fulfillment within 137 days after award, with performance to occur at Robins AFB, Georgia. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition size and timing of solicitation amendments. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in any part of the product or manufacturing process, and any substitute chemicals require prior approval unless already authorized by the specification. Any configuration changes or deviations require an engineering change proposal or formal variance request. Point of contact for inquiries is Corey Carter at corey.carter@dla.mil or 614-693-0310.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-14MN
The contract pertains to the procurement of 50 machine screws with part number BACS12CK3-10 and NSN 5305-01-051-0624, sourced from approved suppliers including Valley-Todeco Inc, SPS Technologies LLC, Howmet Global Fastening Systems Inc, Federal Manufacturing Corp, and Boeing Defence Australia Ltd. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede all other standards unless otherwise stipulated. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. Configuration changes require formal engineering change proposals and variance requests. All items must be packaged per ASTM D3951 and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, with palletization governed by RP001. The unit of issue is each (EA), with no tolerance for quantity variance, and delivery is FOB origin. Inspection and acceptance occur at destination. The required delivery date is March 15, 2027, with a delivery window of 166 days from the contract award. The procurement is managed under solicitation SPE4A6-26-T-14MN, issued by the Department of Defense, with primary point of contact Sibel Claywell. Shipping instructions and transport protocols must adhere to DLAD Proc Notes C19 and C20, with delivery directed to the DLA Distribution Depot in Tinker AFB, Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2042
Aluminum alloy bar stock in 2024-T851 temper, cold finished, with a 0.750 inch diameter and lengths of 10 to 12 feet in whole-foot increments, is being procured under solicitation SPE8E4-26-T-2042, with a total quantity of 227 linear feet. The material must conform to SAE AMS-QQ-A-225/6B and ASTM B666/B666M-20 specifications and is subject to strict quality and certification requirements, including a required Certificate of Quality Compliance with each shipment, which must be forwarded to the DLA Troop Support Contracting Officer. All units must be marked with specific identifiers including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or stamping, excluding die stamping; adhesive labels are required for bars under 0.250 inch nominal diameter. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129R, and delivery is FOB origin to Warner Robins Air Force Base, Georgia, with a required delivery date of February 1, 2027, under a 164-day lead time. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award; submissions from non-listed sources are considered deviations and may result in rejection or criminal penalties. Source inspection requirements are waived for QSLD-compliant suppliers, and the contract includes CDRL-METALSCERT for material certification documentation. Quantity tolerance is ±10%, and inspection and acceptance occur at destination.
WARNER ROBINS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2041
This contract specifies the procurement of copper alloy 630 metal bars with a diameter of 1.375 inches and lengths ranging from 10 to 12 feet in whole-foot increments, weighing 4.951 pounds per foot. The material must adhere to the SAE AMS4640J revision J specification and is designated as a critical application item. All bars must be hot or cold finished and supplied with full metallurgical certification, including a Certificate of Quality Compliance with every shipment, which must also be forwarded to the DLA Troop Support Contracting Officer. Continuous marking is mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluid, legible to the unaided eye, and resistant to normal handling; adhesive labels or tags are required for smaller bars and wires. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including palletization per RP001, and all labeling must meet MIL-STD-129 with special code ZZ. The NSN is 9530-00-492-8205, with a total quantity of 108 feet to be delivered FOB origin within 164 days, subject to a 10% variance in quantity, and inspected and accepted at destination. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared. Products not sourced through an approved QSLD distributor will be considered unauthorized substitutions, potentially resulting in criminal penalties. For qualified suppliers, government inspection requirements are waived, and compliance with the QSL program is mandatory unless otherwise authorized in writing. The contract references additional quality compliance standards including CDRL-METALSCERT and QAP-13873, and all documentation must align with the DLA Master List of Technical and Quality Requirements. The delivery address is the DLA Distribution facility in New Cumberland, PA, and the original required delivery date is November 28, 2026, with a need ship date of February 1, 2027. The procurement falls under NAICS code 332112 and is governed by DLA procedures, with primary
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires strict adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) for the handling, labeling, and documentation of hazardous materials. This includes the accurate preparation and maintenance of Safety Data Sheets for all regulated substances, as well as the proper application of hazardous material labels in compliance with federal requirements. The work is governed under a subcontract arrangement with the Defense Logistics Agency, part of the Department of Defense, and performance is expected at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 541690 indicates this procurement is for other scientific and technical consulting services, suggesting the contractor will provide expert compliance support rather than manufacturing or physical distribution of materials.
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires compliance with MIL-STD-2073-1E for the packaging and preservation of mandrels and expanders, specifically incorporating cleaning and drying procedures followed by preservation method 30 as mandated by DLA RP001. All work must adhere strictly to these military standards to ensure long-term protection, readiness, and functionality of the equipment during storage and transit. The task is scoped under a subcontract and is tied to Defense Logistics Agency operations, with performance occurring at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, indicating a compact window for submission. The NAICS code 493190 categorizes this effort under Other Transportation Support Activities, reflecting its logistical and supply chain nature. While no specific point of contact or set-aside details are provided, the involvement of the Department of Defense and the Defense Logistics Agency underscores the critical nature of the work in supporting military logistics and equipment integrity. Subcontractors must ensure full alignment with all cited standards and timelines to meet contractual obligations.
Other Warehousing and Storage

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
Component Marking and Labeling ServicesThe contract requires the application of permanent markings on mandrels and expanders, including the manufacturer name, contract number, and stock number, in accordance with specified military standards. Additionally, linen tags must be attached in full compliance with MIL-STD-129 requirements, ensuring standardized identification and traceability for defense logistics purposes. The work is classified as a subcontract under NAICS code 339999 and is managed by the Defense Logistics Agency under the Department of Defense, with performance designated to FPO 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside type specified. The exact point of contact details are not provided, and the contract can be referenced via the official DIBBS platform using the provided link.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Mandrels and ExpandersThe contract calls for the precision manufacturing of mandrels and expanders in strict accordance with military drawing 5000-s5101-1385500, requiring advanced CNC machining to achieve tight dimensional tolerances and full material compliance with military specifications. The work involves high-accuracy fabrication processes suitable for defense applications, where consistency and reliability are critical to performance and safety. All components must meet exacting standards for geometry, surface finish, and material properties as defined by the referenced drawing. This is a subcontract opportunity under the NAICS code 332721, managed by the Defense Logistics Agency on behalf of the Department of Defense. Responses are due by August 20, 2026, and the place of performance is designated as FPO with ZIP code 09534. The contract was posted on August 9, 2026, and is accessible via the DIBBS platform for qualified subcontractors to submit proposals. No set-aside designation is specified, and all eligible entities may respond provided they can fulfill the technical and compliance requirements.
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Transportation by SeaThe contract governs the transportation of supplies by sea using U.S.-flag vessels, ensuring compliance with federal requirements for domestic and international maritime shipping. All shipments must be conducted through vessels that are U.S.-owned and -operated, and contractors are required to provide advance notice of planned transports along with ongoing compliance reporting to maintain accountability and regulatory adherence. This obligation applies regardless of the origin or destination of the supplies, reinforcing the priority of U.S. maritime interests in the movement of goods under this agreement. The contract is administered by the Defense Logistics Agency under the Department of Defense, with performance centered at FPO, ZIP 96691, indicating operations tied to military postal addresses often serving overseas installations. The NAICS code 483111 confirms the focus on water transportation of freight and cargo. As a subcontract, this arrangement supports broader federal logistics efforts and requires precise coordination with upstream contractors and government entities. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, leaving a limited window for interested parties to prepare and submit proposals through the designated DIBBS portal.
Deep Sea Freight Transportation

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Radioactive Materials Special Handling (If Applicable)The contract requires strict adherence to labeling protocols for radioactive materials when the specific activity exceeds 0.002 microcuries per gram or the total activity reaches or exceeds 0.01 microcuries. Proper marking is mandatory to ensure compliance with safety and regulatory standards, and the contractor must implement procedures to identify, tag, and document all such materials in accordance with established guidelines. This requirement applies to all handling, storage, and transport activities associated with the subcontract and must be consistently followed throughout the performance period. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO with ZIP code 96691. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 561990 indicates it falls under Other Support Services, suggesting the work involves specialized logistical or operational support functions related to radioactive material handling. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Handling and LabelingThe contract requires the proper handling and labeling of hazardous materials in full compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001, ensuring all safety data sheets and hazard communication protocols are strictly followed. Performance is tied to the Defense Logistics Agency under the Department of Defense, with work to be executed at a military postal address in FPO with zip code 96691, indicating operations may occur in a deployed or overseas context. The solicitation, classified as a subcontract under NAICS code 561990 for other support services, was posted on August 9, 2026, with responses required by August 20, 2026. No set-aside preferences are specified, and the work demands rigorous adherence to federal safety standards for chemical communication and hazardous material management without exception.
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Marking and BarcodingThis contract requires the application of standardized markings and barcodes to military shipments in strict compliance with MIL-STD-129 to enable automated identification, tracking, and storage across the defense logistics network. The work must be performed to support the Department of Defense’s supply chain integrity, ensuring all packages and containers are properly labeled with compliant data structures, including machine-readable barcodes and human-readable information as mandated by the standard. The contract is classified as a subcontract and is administered by the Defense Logistics Agency under NAICS code 561910, indicating it pertains to other support activities for transportation and logistics. Performance is expected to occur at a military postal address with ZIP code 96691, designated as FPO, reflecting the global nature of the delivery requirements. Responses are due by August 20, 2026, and interested parties must submit through the official DIBBS portal prior to the deadline.
Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging ServicesThe contract requires the packaging of supplied items in full compliance with MIL-STD-2073-1E standards to ensure proper preservation and environmental protection throughout shipment and storage. This includes all necessary materials, procedures, and documentation to safeguard defense-related equipment from degradation due to moisture, corrosion, vibration, and other environmental hazards during transit and long-term storage. The work must meet rigorous military specifications to maintain operational readiness and ensure items arrive in mission-ready condition. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO, ZIP 96691. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 561910, indicating it relates to other support activities for transportation and logistics. The nature of the requirement suggests the need for specialized packaging expertise aligned with federal defense standards, and interested parties must submit proposals through the designated DIBBS platform prior to the deadline.
Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Butterfly Valve Supply (Commercial Off-The-Shelf Item)The contract solicits the supply of two commercial off-the-shelf butterfly valves designated by NSN 4820016554275, adhering to Defense Logistics Agency specifications. These items are classified under NAICS code 332912 and are intended as subcontracted deliverables to fulfill a requirement of the Department of Defense. The procurement is open for response until August 20, 2026, with the solicitation initially posted on August 9, 2026. Performance of the contract is to be executed at a military post office location with the zip code 96691, indicating delivery to a U.S. defense installation via overseas or remote logistics channels. The procurement is conducted through the DLA’s online procurement system, and no set-aside provisions or specific small business preferences are indicated.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Ball Valve Supply (NSN 4820-01-717-9509)
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Notification (If Applicable)This contract requires the detection, measurement, and notification of radioactive materials in a marker item when activity levels exceed established regulatory thresholds. The work is focused on ensuring compliance with safety and legal standards by identifying and reporting any presence of radioactive substances that surpass allowable limits, with the goal of preventing exposure and maintaining operational integrity. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and pertains to performance at Fort Bliss, Texas, with a ZIP code of 79918-0000. The solicitation was posted on August 9, 2026, with a firm deadline for responses set for August 20, 2026. It falls under the NAICS code 541380, which corresponds to other scientific and technical consulting services, indicating a technical and analytical scope requiring specialized expertise in radiation detection and regulatory compliance. There is no set-aside designation specified, and the point of contact information is not provided in the data, while the official reference link directs to the DIBBS platform for further details and submission. All activities must align with federal regulations governing radioactive material handling and reporting.
Testing Laboratories and Services

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details